Application of the computer settings. Update

Hello

After I downloaded some updates of high priority on my computer 3 other computers to my work and my computer are still blocked on the "Application of the parameters of the computer" message during Windows startup. I deleted the updates of windows I downloaded this week here and set to ignore, but the problem still happens.
What I see in the system restore on the day, that this problem has occurred is that there is a facility of the so-called "software distribution service 3.0", I searched this program in Add/Remove programs with updates are checked but can't seem to find it anywhere.
I am running windows xp SP3 and my PC is in a network domain. 3 other PC having the same problem but the other computers at work have installed updates and work very well.
Can someone help me please?

Thank you
Kevin.

Advertisement

Hi Kevyo,

The question you have posted is better suited in the TechNet forums. Please see the following link for more information.

Windows XP IT Pro category

Tags: Windows

Similar Questions

  • Windows XP, the application of the computer settings and the application of your personal settings is very slow

    A XP computer over a network, recently and only recently started having problems when starting.  It is very slow.

    When 'apply the settings of the computer' and when "applying your personal settings" is very slow.

    It is only a very recent change.

    A malware scan found no no problem.

    Are there any suggestions?

    You won't if you follow the above canned answer.

    Is that a computer joined to the domain?  If so, the slowness comes from the network, DNS, domain controllers, or group policy.

    You can have better luck in the technet forums.

  • Cannot install applications on the computer, the error 0x800706ba.

    Original title: 0x800706ba error

    I just bought a new computer, and updates have been installed last night.  I'm unable to install applications on the computer, I get an error 0x800706ba code.  Help, please.

    From the desk of
    Press the Windows key + R
    Type WSReset.exe and press OK

    http://Windows.Microsoft.com/en-us/Windows-8/what-troubleshoot-problems-app

    Method 3:


    You can try to run Apps Troubleshooter

    Download and run the troubleshooter modern UI App and check.

    http://download.Microsoft.com/download/F/2/4/F24D0C03-4181-4E5B-A23B-5C3A6B5974E3/apps.diagcab

    Please use the following links as reference:

    http://Windows.Microsoft.com/en-us/Windows-8/what-troubleshoot-problems-app

  • Error Windows update cannot currently check the updates because the service is not running, you must start the computer, windows update services does not

    Original title: Windows Update service is not running / working and is not listed in services.msc

    When I go to windows update a red shield with a white cross appears and when I click search for updates this message appears:

    "Windows update cannot currently check updates because the service does not work, you will need to start the computer"

    * Restared several times-nothing has changed

    Despite what other threads have advised to:

    I checked in the services and WINDOWS UPDATE, Background Intelligent Transfer Service or encryption services are not listed!

     

    * I have changed the settings to "Never search updates" and then back to "install updates automatically" - nothing has changed

    * I ran the Malicious Software Removal Tool http://www.microsoft.com/security/pc-security/malware-removal.aspx- we say that everything was ok, but I can't always verify updates

    * I ran the download to reset windows update components http://support.microsoft.com/kb/971058/en-us but still I can not check updates

    (Nothing is in the update history)

    Am really worried!

    Thank you!

    Hello


    Have you made changes on the computer before this problem?
    Method 1:
    You can try to start the fix - it and check. Check out the following link.
    The problem with Microsoft Windows Update is not working
    http://support.Microsoft.com/mats/windows_update/
     
    Method 2:
     
    You can read the following article.
    Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2
    Note: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base. How to back up and restore the registry in Windows:
    http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

    Note: If bad sectors are detected when running check disk utility and attempt recovery of bad sectors is verified during the verification of the drive for errors, data in the bad sector can be lost as they tried to recover bad sectors.

    Method 3:

    I also suggest that you scan your computer with the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.
    The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.
    http://www.Microsoft.com/security/scanner/en-us/default.aspx

    Note: the Microsoft Safety Scanner expires 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.


    Important: When performing analysis on the hard drive if bad sectors are found on the hard drive when parsing tent repair this sector if all available on which data can be lost.

  • Get the error Code 'WindowsUpdate_8E5E03FB' 'WindowsUpdates_dt000' when you try to download recommended update using the automatic settings 'updates '.

    I just noticed today, pronouncing the 'permission' to Windows to download and install, it is recommended to update it tries to download the update, hit 11% downloaded and then shows the dialog window "update failed", asking me to "Try Again", etc. etc. I googled the error exactly as stated above, and it takes to me an article 'A' answer the Question which recommends a bunch of steps that I have not the first clue of what they mean, or what they will do. I used the option "Microsoft Fix It" after a search, in an attempt to reset the Windows Update settings, but I don't know if it's working or not, although clearly it did nothing to help in the installation of this download. By examining the log of the updates installed, I am able to receive and install other updates, however, it is with a update I see several attempts in the last days to install, and each of them ended in failure.

    When we look at the site of Question answer, other than to check to ensure the update is, indeed, the Automatic value, that it is in accordance with the instructions given that's where I get lost. The following suggestion is something to do with the "C:\windows\system32\catroot" folder, I've never even heard of, and am more than a little reluctant to go messing around with this stuff. Can any that illuminate what he done, or point me in a direction to a response that is written in 'English' for those of us without much experience of computer programming? Live is support available for all what is the cause? Any suggestions much appreciated!

    See you soon!

    Ken, "Medic95."

    See if KB970430 will install after you uninstall IOBit Security 360 & reboot. ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • You can use the GPO who manage the computer settings to define configurations based on users?

    I know that computer configurations and group policy apply to the associated computers that ot OU configs and users in group apply to users.  We have no access to manipulate the users of my team of Fund, but we were always expected to create the image.  Rather than create an image with the settings of the user (sounds, theme, start menu appearance) we want via GPO as much as possible and let our image as naked and as possible default.  We manage both XP and 7 also, but above all of XP.  Most of them are customization options which we want everyone to have the same (with some exceptions).

    Is it possible to configure the user via GPO settings by using only the configuration of the computer?  Sneaky, roundabout, or dirty acceptable methods with the exception of the script in the connection process.

    Some of what we seek to manage:

    * appearance

    * sounds

    * Start menu (classic)

    * screensaver

    And at the point where I'm asking because I thought that google couldn't help me more, I find my answer.

    computer configuration / administrative templates / system / group policy

    closure policy

    We define to be merged and bam.  had no idea...

  • Applications and the computer cannot find HP Deskjet 4180 printer

    Recently upgraded to Windows 8 XP (32 bit).  Downloaded the driver from the HP website for the HP Deskjet 4180 printer and installed it.  Open a document and select print as well as the application cannot find the printer.  The computer does not recognize a printer connected (via USB cable - no network connection).

    Then I downloaded the installation wizard and he can identify the HP devices connected via USB and has chosen the correct software to download and install.  He identified the aircraft and said the basic software that it is installed and recommended that I have the full software.  I did this, which involves downloading a file of 291MB and it works. Eventually return to the same point in the installation wizard and most recognized once the device but the claims only the basic software is installed - followed the instructions on-screen, downloaded 291MB file and the wizard could have do me it again for a 3rd time!  Printer is still not not regonised when I try to print.

    The pilot actually works?

    Is there anything else I can try?

    Your help will be very appreciated.

    Sorry, you have problems getting the printer to set up and print.  Here is a video on uninstalling software of the printer in Windows 8 (which is step 1).  After uninstall, restart the computer, then try to install the full feature software and drivers Deskjet 4180 (link is for Windows 8 32 bit) using this download.

    To the best of my knowledge, this driver should work (I have not heard otherwise).  Try this for me first and if it doesn't work, tell me what is happening. I hope this works!

  • How to make the connection between applications on the computer with my subscription?

    I have Photoshop CS6 and Illustrator CS6 on my computer. When I open that is the one I get a message that says to contact my administrator to renew my subscription. I have a subscription. How can I get the apps to recognize the subscription or membership to recognize the application license, so I can continue to use? I have CC versions on work computer but versions CS6 on computer at home. No problem with subscription and applications on the work computer. With the home computer, apps will not identify subscription. Subscription has been implemented by the it Department at work.

    Hi Jody,.

    Please check the help below document:

    Using creative cloud | 'Renew your membership' window appears when you launch a creative cloud application

    Kind regards

    Sheena

  • got the computer, needs update and my name instead of the former owner, please help

    Purchased from personal, but he left all her things, but has not received the disc to reinstall or updaye, then, how can I do this without crashing the computer?

    Thank you.

    Buy a used computer, it's always a good idea to reinstall Windows to restore to condition buy and go from there.  It eliminates any malware content and possible questionable.   In the last semi computers OEM (Dell, Hp, Acer, etc.), there is a recovery partition on the hard drive that can restore your machine bought as a condition.  The manufacturer saves a dollar or two for the supply of the discs.  Usually it's hit a key or combination of keys when the first splash screen appears when you start the computer.  Go to the manufacturer's website, click on the link "Support" and search for "Download" and download the manual for your computer.  It must contain instructions on how to restore it.

    If you decide to keep your current configuration, but to change the name of the owner, please see the following article:
    "How to change name and company information after you install Windows XP"
      <>http://support.Microsoft.com/kb/310441 >

    HTH,
    JW

  • After that the race automatically updated the computer restores updates

    When I run updates all right until you are asked to reboot. It then install service packs, and then returns all changes automatically.

    Hello

    see if that helps to fix:

    How to reset the Windows Update components?

    There is also an automatic 'fix - it' here

    http://support.Microsoft.com/kb/971058

    Also, try to put the KB numbers in the search on the link below and then manually download the

    http://www.Microsoft.com/downloads/en/default.aspx

     

    or please repost your question in the correct windows update forum

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all

  • An application using the Desktop Manager Update resets the phone

    I develop for a Blackberry Storm using the plugin Eclipse JDE 4.7. I have change the version number on my application and reconstruction & regenerate ALX. I go to BlackBerry Desktop Manager to upgrade the application, and the phone has to reset. It's very frustrating because it takes almost a minute for it to end.

    The application is a CLDC application, not a module of the system, and does not auto-run at startup, why my device needs to reset?

    It frustrates me to no end, because whenever I make a change to the app and I want to test on the device again, it takes too much time.

    I also noticed that this reset is not always necessary, sometimes just upgraded... but I did not understand why.

    Here are a few useful links I hope re this situation:

    -The reason for which reset is required when you upgrade an application
    Article number: DB-00602
    http://www.BlackBerry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/800332/800620/What_Is...

    How to avoid restarting the Simulator to reload an application
    http://supportforums.BlackBerry.com/Rim/Board/message?board.ID=java_dev&message.ID=24888

    How to evade taxes of restart of the BlackBerry?
    http://supportforums.BlackBerry.com/Rim/Board/message?board.ID=java_dev&message.ID=6808

    As well as the suggestion of RexDoug on termination of your application (which is very good advice), you also think that if you do not change the signature of all the persistent classes, the application will upgrade easier.

  • Testing applications on the new OS update problem

    Can't access settings. When I drag down on the device and click settings, nothing happens.

    How can I turn on developer mode ON?

    It worked for me in another message, if you have the same problem:

    The steps if you have your Dev Alpha brick (just web browser):

    Launch WipeReload.bat

    1. Make sure your mouse is on the disabled button to update your computer
    2. With your Alpha plugged Dev, restart the device (power button for 10 seconds after the countdown shows)
    3. When the alpha dev led red lights, you have a fraction of a second to click on this button in the application instance WipeReload.bat. If you miss it, you will have to wait until the dev alpha starts, and then try again.
    4. Update the device
  • BlackBerry App Application changed the appearance settings

    Need urgent help

    An application called Texas Hold'em Poker has been downloaded on my Blackberry Torch 9810. This application has now messed up the entire look of my camera. I can no longer access my bbm. I deleted the app and then restarted my camera hoping it will be normal again, but it's still messed up. I tried to backup restore it did not help. I tried to reset the settings, that it did not work. Rebooted my device as more that 5 times it did not always help. Please help with solutions on how to make the look normal again.

    Back up your data (see KB12487), and then reinstall the software (which should update the current version if an update is available) as shown in KB11320 how to perform a clean reload of the BlackBerry Device Software for Windows or if you see us a Mac KB19915 perform a clean reload of software applications smartphone BlackBerry using BlackBerry Desktop Software on a Mac computer.

    Before the data is restored, make sure that the appearance is as it should. Make a discount to zero to ensure that the display is normal. Once confirmed, it is recommended you do a selective restore of your data (essential data such as BBM, calendar, Contacts, Messages, as shown in KB10339 how to use BlackBerry Desktop Software to restore data from a BlackBerry smartphone from a backup file).

    I would like to know how's the reload.

  • He says that I don't have a subscription when I do it on my other computer, mac, but I need these applications on the computer Im without paying another subscription

    How can I add my subscription to this computer rather than my other?

    Hello

    Please see the instructions at the link below, it should help:

    Connect and disconnect activate Cloud Creative applications

    Applications creative Cloud back in test mode after an update until 2015 for CC

    Let us know if that helps.

    Kind regards

    BANI

  • load application to the startup settings

    Hello

    I want to load some settings to ini file on starting the application = click on the exe file and load the setting on a classic software RAD FormCreate event.

    How can I do this in Labview?

    Thank you.

    On the first run of the executable, you just read in the ini file. No means required.

    Edit: To clarify, LabVIEW code works like a flowchart, so at the beginning of your application 'flowchart' you put your code of ReadFromConfig.

Maybe you are looking for