Application of Windows 8 camera works only with the Lifecam Cinema

Similar Questions

• BlackBerry Z10 PrintToGo works only with the new version of OS 10

  Am unable to load files using PrintToGo from the new version (10.1.0.4181) installed.

  Worked fine with the previous version and works with the Playbook (2.1.0.1526)

  PrintToGo error log:

  PrintToGoDesktop.exe Information: 0: 09/02/2013 11:33:52 - TCPClient.BeginConnect (using ServerIP:192.168.2.102, ServerPort:80)
  PrintToGoDesktop.exe Information: 0: 09/02/2013 11:33:52 - TCPClient.EndConnect)
  PrintToGoDesktop.exe Information: 0: 09/02/2013 11:33:52 - connected successfully!
  PrintToGoDesktop.exe error: 0: 09/02/2013 11:33:52 - Z10 (2ABE5757) cell phone: EXCEPTION RAISING - System.NullReferenceException: object reference not set to an instance of an object.
  on the EDGE. PrintToGo.UserInterface.Device.UploadPDFFile (String fileTransferURL, String fileName, BackgroundWorker bw, DoWorkEventArgs e)
  PrintToGoDesktop.exe Information: 0: temporary removal PostScript file 'C:\Users\Paul\AppData\Local\Temp\PtB1360.tmp '.

  Resolved, had to repair the Z10 with the PC!  Would have thought that upgrading software would have saved the environment so that this step was not necessary (played with this for several weeks and market).

• integrated cam works only with Windows 7

  I did every possible thing but I always stuck with the same problem

  Hi sherry WAM.

  You'll want to go to the website of the manufacturer of your system to get the latest drivers for Windows 7.

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• printer scan works only with the new windows 7

  upgrade windows xp to windows 7 with the new HP Omni 220PC. Have a printer HP C309g-m. To scan from the printer to the computer xp, I had to use the HP Solution Center. The printer works very well with the new windows 7 program and new computer. I install wireless. No problems with it. Today when I went to scan a document with the HP Solution Center (I thought I had to use as before), this message came.

  "HP Solution Center cannot work because your device installation is not complete. Please connect the usb cable, or rerun the installation for a network installation cd. If it does not complete the installation, or you do not have the cd, access the HP help files by clicking on the start menu. "Everything I did. My installation CD said I had a version of the latest update on the installation CD, it was of no use. I went to the HP site and find a download for the drivers updated etc. I downloaded and installed. (although I don't know whether or not it was a duplicate of the drivers of devices on windows 7 for this.) I checked Add/Remove programs to make sure that the printer and the hp solultion Center have been added to the programs. they are listed. I can always scan with

  the hp Solution Center. Should I not this program to scan with this new pc? How can I scan from my printer now? I even tried to click scan on the printer, then scan to computer. the message I got was 'Try from scan of compurer. Refer to the documentation for more details ".  To be sure, I'm all mixed up now. All I want is for my scan printer to work with my new pc.  Everything works well except that scan thing, may help me understand what to do?:  Thank you

  all fixed. has crossed my computer to start then click HP click HP and open list. Went to my printer-clicked on my printer and clicked on the icon list to see if it worked correctly. This is a problem with the drivers and a box popped up with directions on where and how to download and install the devices for windows 7.
  Done this and tested it and everything works fine now. (Ihad already tried the HP site for support and downloaded and installed the fix suggested for the problem, but it did not work). in any case, its fixed and I hope that if someone has a problem, this information will help you.

• Application works only with the WAP. good with wifi

  My application works fine with wifi connection, but does not not with WAP GPRS.

  + 2 days devoted to this subject, but no success.

  Here's the code...

  Hi mantaker, yet I don't have the solution to my previous problem.

  my application using httpconnection and his fine work with Wi - Fi (the device). obtain data from the servlet. I want to use GPRS EDGE. I tried the very last day. but it's not working. even I had the name of the apn, the user name and the password. but it's not working with GPRS. Deploy the NetworkDiagnosticPublic application on device even his also does not work with WAP. and not getting not response. only works with wifi. Here is my code. n my wifi connection successfully application, but I want to do with the GPRS Edge code is

  connThread.get("http://*********.30daytrial.webappcabaret.com/Zain_Servlet/second?f1="                            + NameTextField.editField.getText()                            + "&m2="                            + AreaTextField.editField.getText()                            + "&l2="                            //+ LastTextField.editField.getText());//NOT WORKING                            //+ LastTextField.editField.getText() + ";deviceside=true;ConnectionUID=" + getWap2TransportUid());//NOT WORKING                            + LastTextField.editField.getText() + ";deviceside=true");//NOT WORKING                            //+ LastTextField.editField.getText() + ";interface=wifi");// WORKING                            //+ LastTextField.editField.getText() + ";deviceside=true;apn=internet;" +                            //"TunnelAuthUsername=internet;TunnelAuthPassword=internet");//NOT WORKING
  
     private static String getWap2TransportUid() {
  
       // Get the service book records for WAP2 transport.          ServiceRecord[] records = ServiceBook.getSB().findRecordsByCid("WPTCP");
  
            for (int i = 0; i < records.length; i++){
  
                Dialog.alert("Service: " + records[i].getName());         }
  
             for (int i = 0; i < records.length; i++)           {             ServiceRecord serviceRecord = records[i];             String cid, uid;
  
                if (serviceRecord.isValid() && !serviceRecord.isDisabled()) {                 cid = serviceRecord.getCid().toLowerCase();                   uid = serviceRecord.getUid().toLowerCase();
  
                if (cid.indexOf("wptcp") != -1 && uid.indexOf("wifi") == -1 && uid.indexOf("mms") == -1) {                    Dialog.alert("New ::  "+serviceRecord.getUid());                  return serviceRecord.getUid();                    }             }            /* String recordName = serviceRecord.toString().toUpperCase();             if (serviceRecord.isValid() && !serviceRecord.isDisabled() &&                     serviceRecord.getUid() != null && serviceRecord.getUid().length() != 0 &&                     recordName.indexOf("WAP2")!=-1)
  
                 {                 Dialog.alert("recordName: " + recordName);                     String uid = serviceRecord.getUid();                    Dialog.alert("UID="+uid.getBytes());
  
                     return uid;               }*/           }
  
            return null;  } 
  

  
  

  Yes peter, there are a lot of thread having the same issues...

  http://supportforums.BlackBerry.com/Rim/Board/message?board.ID=java_dev&message.ID=38541#M38541

  http://supportforums.BlackBerry.com/Rim/Board/message?board.ID=java_dev&message.ID=38328#M38328

  http://supportforums.BlackBerry.com/Rim/Board/message?board.ID=java_dev&message.ID=38316#M38316

  http://supportforums.BlackBerry.com/Rim/Board/message?board.ID=java_dev&thread.ID=38157&view=by_date...

  always loads UN stuck

  See you soon...

• showacls works only with the unc on windows 2008 servers paths

  Hi people!

  We use the command showAcls.exe to the folder list ntfs permissions (we then use this list for some internal processes).  It worked well UNTIL we have upgraded a server to Windows 2008.  When we have a command like:

  showacls \\fs05\Userhome_45\brian-ba

  It returns nothing. No error, no data, just returns to the command prompt.   Needless to say that this command worked fine until the \\fs05 server has been upgraded.  I have found that if:

  I put a copy of showAcls.exe on the \\fs05 server and remote control and then in the server AND reference the full physical path, it will work.

  rcmd \\fs05 s:\showacls "s:\HO_USR1\User_Data_Processing\Userhome_45\brian-ba" / s

  Everyone knows this? Or am I the only one still using showAcls.exe?

  Would love to hear of a workaround

  Thank you!

  Hi BRIANBALSTER,

  Your question in Windows Server 2008 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Forum. You can follow the link to your question:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• iPhone personal hotspot works only with the new Windows 7 PCs

  Old laptop with Windows 7 would always connect iPhone personal hotspot using the USB cable. Tried to do the same with the new laptop and nothing. Tried it on a different laptop using the USB cable with the same phone and connected.

  • iPhone personal hotspot is activated
  • USB cable connected
  • Reset the network on iPhone [according to the suggestion of Apple forum]
  • Tried troubleshooting via Windows
  • IPhone enabled drivers in printers and Windows devices and driver date is 06/21/2006. I have tried driver update and Windows says that the best driver is installed
  • Network discovery is on
  • Public is the profile that I put
  • iTunes was not installed

  How can I fix? Should I delete the current iPhone driver?
  Thanks in advance.

  Installed work iTunes and hotspot. iPhone is a 3G!

• Unit works only with the Boot Camp Partition

  Hi guys - I searched the forums for a while and pretty well I came across all positions said that if the unit does not have to uninstall/reinstall VMware Tools.  I tried twice but nothing helped. I am very new to the merger, but for now I'm very excited/impressed with the trial version - I just everything works fine!

  Sorry to ask 2 questions in once, but someone pourrait' one also point me in the right direction on how to remove my bootcamp partition and strictly use VMware so that I can create snapshots and free up hard drive space?

  OSX 10.5.6

  Windows XP SP2 (bootcamp partition)

  VMware Fusion 2.0.4

  MacBook 1st Gen 13 "Core Duo 2 GHz, 2 GB memory

  Thanks in advance for helping me!

  drkenan wrote:

  How to remove my bootcamp partition and strictly use VMware so that I can create snapshots and free up hard drive space?

  If you want you can import the Boot Camp partition as a Virtual Machine based on a separate stand alone file, or you can install Windows from scratch.  After you import if desired you choose and you don't want to use Boot Camp natively or as a training Camp for the virtual partition Machine (not that any) and want to recover the space that the Boot Camp partition is far from taking the Macintosh HD you can then use the Boot Camp Assistant (/ applications/utilities/Assistant Boot Camp) to remove the Boot Camp partition to reclaim that space.

  For the import of the Boot Camp partition as a Virtual Machine based on a stand-alone file, take a look at: VMware Fusion (menu bar) > help > VMware Fusion help > creating virtual machines > import Virtual Machines > import the Partition Boot Camp

  Regarding the Boot Camp existing partition Virtual Machine...

  Note: These senses are different which have already been posted so read and follow through... Note: These steps assume that you have a single Apple to default installation of Windows on a single Boot Camp partition and Boot Camp of VMware Fusion single default partition Machine virtual (without a snapshot *) and if you have changed the partition Boot Camp Virtual Machine to add additional hard disks to be virtual or RAW disk then do not use these instructions unless you backup the Boot Camp partition the Machine package virtual first. * Also note that Fusion 2.0.0 may accidentally have a snapshot with the virtual partition Boot Camp Machine and it should not have, then you should check to ensure that the condition does not exist as well. (With merger closed if the partition Boot Camp Virtual Machine package is over 1 MB in size, then you might have a snapshot in place and do not continue with these instructions.)

  ===

  1. If the merger is open, close it.

  2. in a Terminal (/ Applications/Utilities/Terminal) copy and paste command, as the following and then press Enter and it will delete the partition Boot Camp Virtual Machine of the metadata and the Virtual Machine to help.

  Note: This does not affect the Boot Camp partition install windows in that it does not remove it.  Also be sure you copy all the command line below, as well as, "RM" at the beginning of the ' (quote) after the s in the Machines. "

  RM - dfr "/Users/$ the specified item was not found./Library/Application Support/VMware Fusion/Virtual Machines.

  3. start Fusion (/ Applications/VMware Fusion) and select the Boot Camp partition on the window library of Virtual Machine, and then ctrl-click it and select Delete.

• Samsung 850 EVO Solid State Drive works only with the MacBook Pro - Solution?

  I recently bought a Samsung 850 EVO 500 GB Solid State Drive for mid 2012 MacBook Pro father. The computer was working properly, but it was just very slow. I took the old drive and installed the SSD. I took it to an Apple store so that they could install the OS. A guy at the Genius Bar met with me and first tried to install the OS via the Ethernet cable. It is impossible to install some general error. He then tried to install it on a disc. Which also failed. He said he was not familiar with the type of error that he saw. But he said it was a mistake 'bad '. He said he saw the SSD for my SATA cable worked. He concluded that the reader must be defective. I explained how it is virtually impossible because they have a rate of close to zero. He said: "well they are produced en masse" and explained how they could install a hard drive themselves for some too expensive price. A bit annoying.

  In any case, I took the SSD back to my house and threw it in my desktop PC. It works very well. Then what should I do? Why am I not able to get the SSD to install it? From what I read, the Samsung 850 EVO should be compatible with a MacBook Pro 2012. Can I do to install it at home? Is that all I can say people at the Mac store to help them along?

  Most likely, the drive is formatted for use with Windows computers. First step would be to format correctly for Macs.

  This is Mac OS extended (journaled) with a GUID partition map.

  OS X will only be installed on a properly formatted disk.

  HTH

  Leo

• Satellite A75 - switch wireless works only with the Intel wireless network adapter

  The Atheros card that came with my Satellite A75 had questions, so I installed an Intel 2200.
  According to Device Manager, everything works and is properly installed and should work, but the message I get is the wi - fi switch.

  It is placed at the position, but the indicator light lights up and the Intel card does not connect without it. The light comes on with the Atheros, but this card hangs the system.

  A few months ago, I borrowed an Intel 2200 on an IBM and put it in the A75 temporarily and it worked fine, that's why I bought the Intel.

  I tried the FN + the button with the antenna, but no effect, even if it also works with the Atheros.
  Y at - it another way to activate the wi - fi in addition to the switch and the FN, or is there a way to disable the switch function if the computer doesn't even know it's there?

  Maybe it works.

  Thank you.

  Solved! If anyone has this problem, here is the link to fix:
  http://www.TechSpot.com/VB/all/Windows/t-18046-p-2.html

• OAF Page works only with the manuscript of java for the auto refresh

  Hi gurus,

  I have a problem with deployment of the page.

  I created a custom page and I have written a java script to make and auto refresh page.

  Please find the code I wrote to processRequest below

  OABodyBean rtBodyBean;

  rtBodyBean = pageContext.getRootWebBean ((OABodyBean));

  JavaS string = "javascript:setTimeout ('window.location.reload ()', 11000);

  / * This method is called to call java script function each time that for

  * refresh the page every 11 seconds * /.

  rtBodyBean .setOnLoad (javaS);

  When I run the page of Jdeveloper's get updated. but once I've deployed the page, and start it from the applications it is not refreshing.

  I tested the page of mozilla and it works fine but when I run IE it is not refreshing.

  Help, please

  Hi guys the problem is resolved.

  The problem was that I was using the old version of Jdeveloper which created oa_html with the older version files and the internet explore search the latest files from version of.js.

  and the code has been changed as below.

  Create a timer

  OABodyBean bodyBean = pageContext.getRootWebBean ((OABodyBean));

  JavaS string = 'JavaScript:setTimeout('window.location=window.location',11000);';

  bodyBean.setOnLoad (javaS);

  end timer

  OALinkBean linkBean;

  linkBean = (OALinkBean) webBean.findIndexedChildRecursive ("PayslipFile"); / * The ID of the column * /.

  BindValue OADataBoundValueViewObject;

  bindValue = new OADataBoundValueViewObject (linkBean, 'Url'); / * VO attribute * /.

  OALinkBean _temp = linkBean;

  / * - Required placeholder for the url column added by vo Extention *.

  linkBean.setAttributeValue (OALinkBean.DESTINATION_ATTR, bindValue);

  OAApplicationModule am;

  AM = pageContext.getApplicationModule (webBean);

  OAViewObject vo;

  VO = (OAViewObject) am.findViewObject ("ViewPayslipVO1");

  vo.clearCache ();

  vo.executeQuery ();

• My Wacom Graphire4 graphics tablet works only with the pen pressure, OK in CS5 but not CS6...

  I am Windows 7 Professional 64 bit and still have the CS5 and CS6 64 bits loaded.  I've used my tablet with stylus Graphire4 with CS6 will detect all problems.  All of a sudden it only works with the pen pressure even if the stylus pressure is off.  I'm trying to use it as a mouse and frequently use shift/click when you change a mask.  I can do it no longer.  If I run CS5 the pen works as it should but not CS6.  When I first open the CS6 with visible brush the brush palette shows a hard brush, but when I open a file it turns into sensitive pressure without measure by me.  I have reset the brushes, re-installed the driver and finally downloaded a driver more but the problem persists.  Because it works very well in CS5 but not CS6 it must be a problem to Adobe.  It's very frustrating.  I enclose a composite image showing what happens to the CS6.  The right side shows what looks like the brush palette until I open a file.  The left side shows what happens when I open a file.   Even if I do not open a file and make changes within the brush palette, it immediately turns to pen pressure.  It's very strange.

  I would of course someone can provide information that could help.

  Kind regards... Ralph

  

  No answers, but in the meantime, I have come into contact with Adobe.  Problem has been resolved by phone.  Resolution is to delete the preferences file reopen CS6, date at which the PS automatically creates a new preferences file.  It was she, corrected a problem... Ralph

• Magic Mouse works only with the latest el capitan

  Why Apple is not the problems with El Capitan (10.11.6) and it's Magic Mouse? The only way is connected to my MacBook Pro is to remove the com.app.bluetooth.plist at the end of each session and even that does not always work. When it is finally connected, the mouse connects and reconnects constantly during the session. The mouse is an Apple product, and Apple does not seem to recognize the problem or give anyone a viable solution.

  Determine that the problem is inherent in the software is an act of faith (there is no batches of messages here with the same problem).

  Try resetting the SMC and the NVRAM.

  Barry

• GPIB analyzer works only with the Trace of e/s on the same computer

  Following the advice on the basics of knowledge I want to capture Trace IO simultaneously with the

  Capture on the field PC Analyzer.  This is because I have to go on a customer site and only want to

  capture non-intrusive traffic GPIB.  The IO Trace does not capture the field of PC that has the GPIB +.

  card.  When I run IO path on the Test PC, it works fine.  However, I want to avoid encroaching on the

  Setting up clients to say IO Trace Facility.

  If I run a basic series write and read VI. EXE on the PC in the field and to perform only IO capture of this

  works fine (no instrument not attached - just to make sure IO Trace works on PCs in the field).  If I run the NOR

  draw on its own on the field PC, then run the Test PC controlling Instruments, IO Trace is

  does not work.

  At this point, I wonder if Analyzer and IO Trace can not run simultaneously on the same PC?

  OR Trace does not work with GPIB cards +?

  Help much appreciated.  Thank you

  Trace of e/s OR and GPIB Analyzer can be run on the same computer, but not in the way you want.

  The GPIB analyzer is actually a Logic Analyzer, which "listens" for all lines GPIB directly from hardware. For this reason, it can be run from any computer connected to your GPIB topology, even it is not involved in the transers. This allows almost completely corner the bus logging.

  Trace IO OR works with drivers OR Save function calls that are made. These function calls can only be captured the system where they are called, therefore NO IO Trace should run on the test computer. Trace IO NOR will always be a small impact on the time where the test system, due to the time it takes to connect to each call.

  -Jason Smith

• WUSB54AG works only with the safety of the new Netgear rotuer

  Just got a new router.  All my devices connect properly with the exception of the desktop computer that uses an external adapter to wireless of Linksys (WUSB54AG).

  The office is currently running SP3 of Windows XP (home edition).

  The latest driver for the card has been installed (3.0.18.0).

  I am able to connect if the security of the router is enabled OFF.

  The router has 3 security options:

  (1) WPA - PSK (TKIP)

  (2) WPA2-PSK (AES)

  (3) WPA - PSk (TKIP) + WPA2-PSK (AES)

  I understand (from Linksys technical support) is that the device MUST be able to connect using WPA - PSK (TKIP).

  My Linksys monitor indicates that the machine is connected to the access point but not the internet (when I used the WPA - PSK (TKIP).  The IP address that is assigned is 169.254.3.129 and not the 192.168.1.x expected.

  When I disable security on the router, the unit can connect and I'm a 'good' assigned IP (192.168.1.x).

  Ideas on the best way to troubleshoot and resolve this problem would be appreciated!

  AK

  I managed to change a lot of settings on my 2.4 GHz routers network settings.

  After passing it in WPA - PSK (TKIP) and by changing the mode/max speed "reaching up to 54 Mbps" - it works finally.  I guess that 'forced' somehome the router in order to disseminate the tape of 'G' rather than a strip of "N" (just guessing).

  It does NOT work when the router is in "mixed" (security) mode or when the speed has been set at a higher limit.

  Thanks for the info, if.

  I learned a lot during this process.

  AK