Application stops working out - Windows 10, CVI 2013

Similar Questions

• Visual studio 2005 application stopped working after windows 7 32 bit OS update to service pack 1

  Hi support them.

  I did tutor which is used to record the Windows Application to the learning process. It is a 32-bit application that works fine in Windows XP and Windows 7 32 bit OS operating system. But after the upgrade of Windows 7 Service Pack 1, it doesn't now. When we try to record something, it's giving the guardian has stopped working and program disappears.
  Any product from Guardian:
  1. it is a Visual Studio 2005 application.
  2. in execution of tutor, turn us the key to register PEHOOK.
  3. some of the DLLs we use are: Interop * and other user defined dlls.
  4. it can be used to record any application Windows 32 bit OS.
  When searching I got a solution in the forum:
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_programs/application-has-stopped-working-error-on-Windows7/82b6fbcd-ABA7-49e5-833d-51ce42e6ef42
  But after installing it too, the problem exists.
  Could you please help me solve this?
  Thank you very much in advance.
  Best regards
  Manu.

  Hello Manu,

  Thanks for the updates.

  Since then, enforcement, guardian, uses Visual Basic, please post this question in the Forums of Visual Studio for assistance.

  If you have any other questions about Windows operating systems, please get back to us.

• Please help me solve this message: Userinit logon application stopped working. I have windows 7. Thank you.

  Please help me solve this message: Userinit logon application stopped working. I have windows 7. Thank you.

  Hello

  -When exactly you receive this error message?
  -Did you do changes on the computer before this problem?
  I suggest to maintain the computer in clean boot mode and check if the problem still persists. A clean boot to check if startup item or services to third-party application is causing this issue.
  You can read the following article to configure the computer to boot:
  http://support.Microsoft.com/kb/929135
  Note: After the troubleshooting steps, see step 7 in binding boot is a way of putting your computer to normal startup mode.
   
  Hope this information helps.

• Office has stopped working on Windows 8

  I have Windows 8 and Microsoft Office 2010 Professional. My computer just ran some updates and now Office has stopped working. When I try and open any Office application an error comes up saying "Microsoft Word has stopped working. "Windows is collecting more information about the problem. After a while the error message "Microsoft Word has stopped working. A problem caused the blocking of the program works correctly. Windows will close the program and notify you if a solution is available. I know that it is a common error message, but all the solutions Forum, including running the Fix It tool, deal with this problem on Windows 7, I can't find all the solutions for Windows 8. I tried at the end of the Normal.dotm file as this has been suggested as a way to fix the tool on older versions of Windows, but I'm unable to locate this file on WIndows 8. Any suggestions would be welcome! Thank you.

  withdrawal Abbey sprint fine player while in safe mode it sort it out for me.

• "drm activator application stop working" error when installing a game

  applications of the Activator

  I'm runng windows vista basic and I'm trying to download a gme bought but I can't download it, I get a message that says "drm activator application stop working", which is an activator of drm, and how to fix?

  Hi tata219

  Thanks for posting on Microsoft Answers.

  The procedure below can help solve the problem.  This is not a known solution but something for you to try.

  1 left-click on Start
  2 - right click on computer
  3 - left click on properties 4 - left click on Advanced system settings
  5 - running , click settings
  6. left click on the parameters of Performance data
  7 - click on TURN DEP FOR ESSENTIAL WINDOWS PROGRAMS AND SETTINGS ONLY.
  8 - click apply and then click OK.

  UAC: (User Account Control)
  Open Control Panel and type in the user account in the search box. You will see the link for "turn User Account Control (UAC) or not". Until it clicks. Uncheck the box and restart your computer.

  Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.
  

  Please post back and let us know if it helped to solve your problem.

  Ken
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• HPWA_Main.exe people with disabilities and HP Support Assistant Application stop working

  First of all Hello! I have some problem in my HP G62 - a32EE Notebook PC windows 7 homebased. First of all my HPWA_Main.exe has been disabled. Even if my bluetooth and WLAN is disabled. I tried to unplug the adapter and I also uninstall my wireless HP support, but still I can activate it. I tried to click on the F12 key, but even my f12 key didn't work. My system BIOS has been updated already last January 13, 2012.

  Second, my HP support Assistant application stops working 5 days ago. I received a notification on my hp support assistant that needs to install the update. So, I installed it but I can't install itself because of serious problem. So, I was advised to close the application, and I did. Yet, I can not use my hp support assistance so far.

  Any help will be much appreciated.

  What was the status message for the card wireless in Device Manager?

  My previous post should be the steps listed.

• Skype has stopped working and windows is looking for a solution.

  original title: problem with Skype

  I have been using Skype on my laptop for 12 months with no problems, all of a sudden, I get a message that Skype has stopped working and windows is looking for a solution.  I checked my firewall, windows updates and downloaded Direct X, as suggested by Skype. I've uninstalled Skype and downloaded again to make sure that the version lasted. IHAVE had also my whole system recharged but it did not work. I am at a loss to know what to do next. Someone at - it ideas

  Hello
  
  It is a possibility that a third-party application is causing the conflict with Skype. We can perform the clean boot troubleshooting and check which program is causing the conflict.
  See the article below for instructions on how to start your computer in a clean boot state.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: When the diagnosis is complete do not forget to reset the computer to a normal startup. Follow step 7 in the above article.
   
   
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Tiles stopped working in Windows 8.

  Original title: why my tiles stopped working in Windows 8. Work perfectly for a week now just stopped working suddenly. I downloaded Windows 8 from a disc

  I had so many problems with my pre-release version of Windows 8 that I almost was not upgraded. I received the disc for a Christmas gift and installed. To my surprise, it worked perfectly, but tonight, all Windows 8 tiles have simply stopped working. The color screen appears and then after a few seconds it flashes to the splash screen without loading the tile/app. Is someone can you please tell me what I can do to get the system working again. Thank you very much the Microsoft community has always been a great help when I had problems before.

  I'm having the same problem.  I tried both methods to see if the problem will be solved.  None of the applications do not work.  I installed Windows 8 from the disc twice.   I have an ASUS U56E.

• Error when you try to use VoIPBuster to place VoIP calls: Client for VoIP calls has stopped working. Windows is checking for a solution to the problem.

  Client to make VoIP calls

  I recently started having problems, make VoIP calls from my computer.  I use VoIP Busters (and using it for a few years without any problems).  Evertime I try to call the destination phone rings a couple of times and then stop.  The next thing that happens is an error message that says: "Client for VoIP calls has stopped working.  Windows is checking for a solution to the problem.  It is followed by another screen that says: "a problem caused blocking the program working properly."  Windows will close the program and inform you is a solution available. "  Nothing happens.  How to overcome this problem.

  I finally had to resort to the re-installation of Windows.  This solves the problem.  But don't forget to back up your computer and email address / addresses before you do.

• My administrator password stopped working on windows vista

  original title: administrator password

  My administrator password stopped working on windows vista... What can I do?

  Hi impathunt,

  See the article mentioned on the Microsoft Policy below we lost or forgotten the password.

  http://support.Microsoft.com/kb/189126

  For reference:

  What to do if you forget your Windows password

  http://Windows.Microsoft.com/en-us/Windows7/what-to-do-if-you-forget-your-Windows-password

  Keep secure passwords - Microsoft strategy on move the passwords

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/keeping-passwords-secure-Microsoft-policy-on/3eba3150-8742-4264-be9f-0daaad2282cd

  (Refer to the suggestion given by BillFill dated dated December 14, 2009)

• Microsoft Flight Simulator has stopped working. Windows is looking for a solution to the problem

  Original title: games

  When I start my X Microsoft Flight Simulator (Deluxe Edition), it is running propely for some time (15 to 20 minutes) that it no longer works and gives me a message "Microsoft Flight Simulator has stopped working. Windows is looking for a solution to the problem"and he have me to close the program. (I have Windows 7)

  Help, please. :)

  I just "uninstalled" pack of the accelerator, and it worked fine.

• My DVD/CD drive has suddenly stopped working under Windows 7

  Ive been using Windows 7 for about 6 months now with on any trouble until recently my DVD drive has suddenly stopped working. Windows detects the drive but when I double click on it in my computer it says please insert disc. I find the drive in Device Manager and windows recognises that there is an error that says:

  Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might be installed a file that is signed incorrectly or damaged, or maybe it's a malicious software from an unknown source. (Code 52)

  I tried to uninstall the drivers in Manager device and rebooted the computer to let auto windows find the driver and reinstall it but to start, I get a message that says:

  Device not installed driver software

  I know that the drive is fine because it works fine in Ubuntu Linux system he worked great in windows 7, so stopped. any help would be greatly appreciated. Thank you.

  Go to the Web site of the factory, download the driver appropriate for your device. Uninstall the driver that is currently installed and uninstall the device in Device Manager. Reboot... After you restart, you have 1 of 2 options depending on how the software is packed from the manufacturing. (A) put an end to the automatic Windows installation feature and use the downloaded software to take care of it for you... If that's how it is set up to operate or (b) wait for windows to auto-trouvez and try to install the device, and when he asked the pilots to open and extract files downloaded to any location you choose and point the installer of windows in this direction.

  Jonathan Matthis aka "7test" on MSN QnA
  Chief Administrator of the Site
  Windows 7 QnA
  http://Windows 7qna.ning.com

• Error: Matte final has stopped working and Windows is trying to find a solution

  Original title: Aunsoft final Mate software v 1.7.1 will not run on W7 machine

  I tried to run Aunsoft final Mate software v 1.7.1 on my W7 machine (Windows 7), but it always stops running until it actually launches.  I tried to install my Norton Security full suite uninstalled to ensure that any anti-spyware not wasn't in the way, and it still does not launch (after uninstalling Norton, I uninstalled final Mate and only reinstalled as well).  I keep getting the error message Final Mate has stopped working and Windows is trying to find a solution, which is does not work.

  Aunsoft crossed all their available technical means, but they could not understand whatever it is no more.  They have not said it's works fine on their machines of W7.

  I also tried to intall a product different from Aunsoft MTS Converter, just to see if that would go.  As with Final Mate, it seems to install fine, but also hang up when start and never actually starts.

  Anyone else have problems or suggestions on how to turn ugly Mate on W7 final enforcement?

  This is an old post. Still, I thought I would share my understanding of the problem. I've also faced this runtime error. This happened when the video files have been loaded from an external hard drive last sessions. When the session has been closed, these files were still listed in the source. It seems, when I started final Mate, it looks for the files and then shows the runtime error. When I connected this drive, this problem has been resolved. Therefore, the solution seems to be to ensure that the files are deleted from the source list before leaving the program.

  Hope this helps someone who knows the same problem now and google up to this discussion.

• laptop keyboard stopped working after Windows update.

  have a toshiba satellite A505 laptop and the keyboard stops working after Windows Update reboots. We reinstalled Windows 7, which fixed the problem until the updates have come. Now the keyboard is unresponsive. Sounds like a software problem, no material. Also checked the keyboard drivers that are up to date.

  As a first response, go to the control panel, device, keyboard, keyboard Manager and right click, uninstall it and let it rediscover Windows and then reinstall it.

  It suits it much of the time.

• Game "Faery-Legends of Avalon"-"a problem caused the program to stop working correctly, Windows will close the program and notify you if a solution is available.

  I downloaded a game from microsoft called 'Faery-Legends of Avalon', I am currently running Windows 7 Professional. I can't play the game. The game turns on but when it gets to the part where you enter a character name, I get the answer that ' a problem due the program to stop working correctly, Windows go close the program and notify you if a solution is available. . Is this not compatible with windows 7 pro game. I just installed pro about a month ago and this is the first game that I downloaded from the installation.

  Moved from feedback

  Hello

  1. is this problem confined to this game here?

  2. have you checked if the computer meets the system requirements for the game?

  System minimum requirement for the game:

  * Operating system: Windows XP / Windows Vista / Windows 7

  * Processor: Intel Core 2 Duo E6600 2.4 GHz / AMD Athlon 64 X 2 Dual Core 5800 +.

  * Ram memory: 2 GB

  * Of hard disk space: 4.5 GB

  * Video: nVidia GeForce GT 140 / ATI Radeon HD 3870

  * Sound Card: DirectX Compatible

  * DirectX: 9

  * Keyboard / mouse

  If your computer meets the system requirements, then I suggest you to try the following methods and check if it helps.

  Method 1:

  Put the computer in a clean boot state, and then try to play the game and see if the problem still occurs.

  How to troubleshoot a problem by performing a boot in Windows Vista or Windows 7:

  http://support.Microsoft.com/kb/929135

  Note: once you have completed troubleshooting, try the procedure described in step 7 to reset the computer to start as usual.

  Method 2:

  Run the scan tool (SFC) System File Checker and check if it helps.

  How to use the tool File Checker system to troubleshoot missing or corrupted on Windows 7 system files: http://support.microsoft.com/kb/929833

  Check the event viewer for the event logs for the exact error message and the cause of the problem. The event viewer will give you all the information about the cause of the problem.

  What are the information contained in the logs of the event (Event Viewer)?

  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer

  Hope the information is useful.