Application that created on another computer will not connect usb-camera

Similar Questions

• Computer will not recognize USB printers

  Original title: no USB connection recognized computer to the printer

  I use windows 7 64-bit. I use a HP Deskjet 2050 for 3 years... all of a sudden he says computer is not connected to the printer. I uninstalled and reinstalled the printer drivers, still nothing. I bought a new printer and the computer still does not recognize a USB connection of the computer to the printer (HP Officejet 2620).

  Michelle,

  Thank you for keeping us posted.

  I'd like you to try this article-

  http://support.Microsoft.com/kb/2654149/en-us

  Please let us know if that helps.

• my computer will not connect to wireless internet

  I got a bad virus on my computer and I had somone who knew what they were doing to clear my computer.  Once they wiped it they put all the disks provided with the computer back on, but I can't conect to wireless internet. When I go to connect to a network, it is not see the same there is wirless avalible. I know the router is working because my phone can pick up the signal. I don't know what to do?

  Hello

  Turn off the router (unplug power cord), wait a few minutes and then turn it back on.
  Restart and try to sign in.

  1 do these to erase corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------------------------

  2. your router could be suspicious here, you have successfully updated its firmware as a possible solution? And
  I would update your WiFi drivers on computers. How you are positioned in the router?
  Are there obstacles in the path?

  Actually try updating your driver and disabling the network logon. You can use a wired connection
  If possible or download drivers on another computer and transfer them via removabler
  media.

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver-
  Note the version - click on update driver (can't do anything as MS is far behind certifying)
  drivers). Then right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver
  stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version.
  (Those become your fonts of rescue system manufacturer).

  Repeat for network (NIC) card and is a good time to get the other updated drivers Vista
  love the updated drivers.

  I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE like
  they are almost always old, and you can search for drivers manually as needed.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ------------------------------------------------------

  Make sure you know the details of connection to your wireless router - SSID and password.

  You lose connection when you do and have to redo your logon.

  Control Panel - Network & Sharing Center - right, click Customize - define the network locations
  page - down left click on merge or delete network locations - REMOVE all instances of your network
  (and all the others you no longer use)-RESTART. Start - Connect To log on to the network.

  -----------------------------------------------------

  Check this box:

  Strange problem with Internet under Vista
  http://www.catonett.com/blog/archives/194

  Windows Vista cannot obtain an address IP of certain routers or from certain non-Microsoft
  DHCP servers
  http://support.Microsoft.com/kb/928233/en-us

  ----------------------------------------------------

  And:

  Network connection problems
  http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• computer will not connect to a computer via bluetooth nother

  I am trying to connect two computers using bluetooth for file transfer, but I get error 0 x 80070057 trying to pair.
  usb bluetooth adapters are about 1 foot away.
  two computers running windows 7 home 64-bit
  Help me please

  Hi Jacob,

  1 do you have Bluetooth devices internal or external connected to the laptop?
  2. have you checked if all the Bluetooth drivers on two laptops are very well installed?
  3. this working fine before? If Yes, are you aware of changes to the computer before the show?
  4. is this a problem only when connecting these 2 computers?

  We will analyze and identify the cause of the problem.

  Method 1:
  

  You can run the Fixit and see if it helps.

  Hardware devices not detected or does not
  http://support.Microsoft.com/GP/hardware_device_problems
   
  Method 2:
  
  I would also say to browse these below items that could help you to fix this problem.

  The problems with Bluetooth devices
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Bluetooth-enabled-devices

  Note: It also applies to Windows 7

  Set up a Bluetooth compatible device

  http://Windows.Microsoft.com/en-in/Windows7/add-a-Bluetooth-enabled-device-to-your-computer

  Hope this information helps. Response with status so that we can help you.

• Computer will not connect to the printer over the network. How can I configure the fax as well?

  I'm new here and just beyond frustrated trying to get this to work for my office.

  My other printer works by USB because my computer give me a warning throughout the day that the USB is corrupted. Anyway, I got a new printer and I am trying to connect through the network. My iPhone prints through it. My computer OS is Windows 7 64 bit.

  My printer is HP Officejet Pro 8600 all-in-one

  I want to connect from the network, and I want to set up the fax. My phone does not work when I plug the line in the printer then phone ext line into my phone.

  I'm confused! Help someone! Please, I beg you!

  Hi ahagereo,

  To connect the printer to your network, follow the steps outlined in the document below.

  http://support.HP.com/us-en/document/c02886889

  Fax: Make sure you have the telephone line connected to the port of line 1 to the back of the printer.

• Set to automatic update ran CHKDSK and my computer will not connect

  Is there an automatic update on demand. When I turned on my computer, it ran a CHKDSK. I saw that he has deleted a file named $I381. When he started to update and got to step 3 of 3, he keeps trying to update. It restarts automatically and goes back to step 3 of 3 screen continuously. I tried closing down and turning them back, but not luck. Me should not be in a journal or anything. It just keeps trying to complete step 3 of 3.  Does anyone have an idea of what past? And how to fix it?

  See if this sugesstion can help you:- http://support.microsoft.com/kb/949358>

• My computer will not connect to the internet. I have wireless explore 6. System displays all NICs with a yellow warning sign. Icons at the bottom of the page are all gone along the bars indicating connection strength.

  Error code 39 on all network adapters
  Recently released the Fix - It professional. The program runs and updates to ensure that spyware and viruses are not on the system. This time something came and said 'this will change some programs and may affect the way your computers run' (something like that) then it poped out and the deed has been done.
  I reinstalled all the drivers for wireless cards
  Still no connection and no bar at the bottom right of the screen.

  Help, please

  Thank you
  Tony1989

  Hello V-ness,

  Thank you for your message.  Please follow the steps below and provide feedback so that we can better help you get this issue resolved.
  Click 'Start' > select 'control panel '.
  Double-click "network connections."
  Do you see your wireless connection?  If so, does say disabled?  Can you do a straight and click enable?
  We can't wait to hear back on your part.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• My computer will not read usb flash drives or recognize the iphone using windows xp

  How can I get my computer to read usb flash drives or recognize iphone using windows xp both can be played on other computers, but not this one.

  Hi Nate53,

  ·         You have the latest drivers installed for the computer?

  ·         Have you tried to connect the player to different ports on the same computer?

  Check to see if the following is useful.

  Method 1: Try to reinstall the USB controllers and check if it helps.

  a. click the Start button and then right click on my computer. Click on properties.

  b. click on the Hardware tab, and then click Device Manager. Expand the Bus USB controllers section by clicking on the sign «+»

  c. each of the devices under the USB controller section uninstall by right-clicking on each one, then click on uninstall.

  d. close Device Manager, and then restart your computer. Windows XP re - automatically installs the USB controllers in your computer, so you don't have to do anything further. Your computer is now running properly USB devices.

   

  Method 2: Log on to the manufacturer's Web site and update the latest chipset drivers and other updates to the device driver.

  How to manage devices in Windows XP

• My computer will not connect administrator account

  When I get to the home screen, and I try to put my password to open a session in my account (which is also my administrator account) .He told me that user logon Service failed to connect.

  I can connect in all other standard users without problem, but when I try to use the administrator command prompt, I get a message requesting my password--and it does not use the command prompt.

  I also tried to do this in safe mode, but it simply doesn't. What should I do?

  You can try in 2 ways. .....
  Assuming that your full is the error message:
  The user profile service has not logon. User profile cannot be loaded

  1 use this tutorial:
  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  2. do a system restore. Choose a date where you did NOT have this problem as your restore point:
  Start button > Search box, type system restore > press the Enter key > uac prompt > click on choose a different restore point > next > select dates as your restore point, until the click > next > finish
  To sit and wait. The machine restarts when it's done.

  t-4-2

• Win 7 64 bit computer will not recognize the old jpg files since 2003 of the records that have been transferred to an external hard drive.

  Win 7 64 bit computer will not recognize the old JPGs from three 2003 files that were transferred to an external hard drive...  File appears in the directory but with no thumbnails icon. Does not open in the Viewer, Picassa, Ifranview, paint, PhotoShop.  I get conflicting messages... invalid image (Windows Viewer)... Unknown file format (IfranView)... Access has been denied (painting), a blank image (Photoshop),... You are not allowed to open this file (Picassa).

  Creation 2007
  Last updated on 2003
  2010
  Any help would be appreciated.

  Mahalo,

  Philippe

  Ran the Scan, the system is secure.

  I was able to bypass stubborn files to transfer them to a flash drive and copy them to another folder.  I was then able to access.  Somehow I messed up the permissions in the previous transfers of old machines and OS.

  Thank you for your help and attention.

  Mahalo,

  Philippe

• Create a model that can be replicated, but will not show changes in the original model, which occurs in any comps duplicated from it?

  I imported a doc I - 4 layers. Then I dragged these 4 layers in a new comp - comp1. I would like to reproduce this model so that I can try different things using these same 4 layers. But when I duplicate the comp I did - comp 2 - any change I make appear in comp1. How can I create a model that can be duplicated - but will not show changes in the original model, which occurs in any comps duplicated from it? Thank you very much!

  (CS5.5)

  It is a common misunderstanding when you start working in Ae. It takes time to get used to, and even veterans are still this error from time to time. Here's the thing, you have to get in your head: your project Panel is where your source material is, and the timeline is the place where there is a representation of this source. This means that if you duplicate an item in your timeline (particularly relevant for the precomps) it will duplicate a copy, not the source. so, if change you it - it will change all instances of this copy. If you want to duplicate a precomp and create another source, you will need to do it in a 4 step operation:

  1. duplicate your precomp in the timeline (you got that day)
  2. Select the source of this copy in the project Panel (currently the same precomp)-right click on the-> precomp 'reveal the source layer project.
  3. duplicate the precomp selected in the project Panel
  4. replace the copy in your panel mounting with the duplicate of the Source Panel (shortcut - Ctrl + alt + / when both are selected, or drag it to double with pressing Alt)

  what you are really duplicate the precomp twice - once in the project window and once in the timeline, and then one link to the other.

• I tried to buy Let It Be the audiobook version and it will not download. Said that I bought it, but will not download. I made another purchase at the same time and had problem now.

  I just tried to buy the audio book of Let It Be version. ITunes says that I bought, but it will not download. I did purchase just before that Let It Be one and it downloaded without problem.

  Is it is not currently downloaded from iBooks on your iPhone app, then it shows on the purchase tab in the download application?

• Computer will not start at the top. I was first getting a 'file problem' message on nv4_mini.sys. After finding that someone else had...

  Computer will not start at the top. I was first getting a 'file problem' message on nv4_mini.sys. After finding that someone else had the same problem and I responded went to try the solution but then started to get the message that the file: \windows\system32\config\system is missing or corupted. Have tried to do where I could start up in safe mode and cannot. Tried to boot from the installation CD, but when I try to make the system recovery and choose the system to recover nothing happens. This isn't regarding the password. I have a Dimension 4500 XP sp3

  Hi BrianJ641,

  Follow the steps in the article.

  http://support.Microsoft.com/kb/307545

  Note: When you are prompted to type the administrator password, you can type if you set the password. If the administrator password is blank, just press ENTER.

• Virus deleted and now the computer will not start... I get the blue screen with an error that says STOP: 0x0000007B (0xB84C3524, 0xC000000E, 0x00000000, 0x00000000) what is the problem? !!

  Virus deleted and now the computer will not start... I get the blue screen with an error that says STOP: 0x0000007B (0xB84C3524, 0xC000000E, 0x00000000, 0x00000000) what is the problem? !!

  Hi ipitedafoo,

  You can check if this article helps.

  Advanced troubleshooting of errors "Stop 0x0000007B" in Windows XP

  See also:

  Error message "STOP 0x0000007B" when you restart your Windows XP-based computer

• I need help download microsoft NET frame model 2.0 on my computer so that my Lexmark 5500 printer will not work correctly.

  I need help download microsoft NET frame model 2.0 on my computer so that my Lexmark 5500 printer will not work correctly.  Please call me at the

  Thank you
  John Robinson

  Original title: hardware device

  The lies of failure with your method of installation of the drivers / software, you install using a Lexmark CD or download from Lexmark support?

  http://support.Lexmark.com/index?ProductCode=LEXMARK_PRO5500&page=product&locale=en&UserLocale=en_US#2

  NB there is also a firmware update