Applications not no projection in all PROGRAMS on the start of Vista after the virus.
Hello
Forget the junction points. They are only for backwards compatibility (and are not called points of junction of the system, only in the documentation of the system). I don't think that the Start Menu, Documents and Settings folder (the point of junction for your profile among others) will seek to replace the one right that should be there. I might try it if it was me, but it's not worth the risk for you (it could cause more damage than it solves - and I'm not going to try it just to see if it works).
It's a shame to system restore because this would probably solve the problem quickly and efficiently. Perhaps you should consider maintaining that a few points spread over time even if they do not place - you are short of space that you need to restore space? I didn't know you had only a very current restore point or I have suggested the procedure.
If you're short on space, here are some suggestions:
A great many things affect speed and performance, and the amount of space available on your system - especially the existence of various files and which is loaded on the system. There are ways to handle this in Vista (and that you follow all the suggestions) - and of course the amount and type of RAM and the speed of your processor and motherboard (but I'll just discuss here the software solutions - you can go to your supplier/manufacturer of computers for hardware solutions, if some are available (I) for example, am maxed out at 2 GB of RAM in my motherboard and there is no motherboard better available for my laptop model).
To enhance your speed, to using Disk Cleanup: http://www.vistax64.com/tutorials/76073-disk-cleanup.html.
Also do optimization: http://windows.microsoft.com/en-US/windows-vista/Optimize-Windows-Vista-for-better-performance.
Go to start / search options and type msconfig and enter and then double-click on the program icon that appears. Go to the Startup tab and uncheck any program that you don't need from start. This will probably be the majority of the items here - otherwise most of them (some are needed as the AV program but more are there to make open source programs more quickly and make you believe that they are more effective). This will free up a lot of RAM and a great help to make your system faster (but maybe not as long as you'll be able to see the difference - but maybe according to how many useless stuff loads at startup).
You can perform some of these tasks (and more that aren't entirely related) using http://onecare.live.com/site/en-us/default.htm (which also seeks the malware). I do it on a monthly basis only as part of normal maintenance, and I suggest you do the same. Make sure that you select a full analysis - it will take a few hours (mine can take about 5-6) but can works in the background so start when he has enough time to complete.
You also want to have good AV programs and HAVE on your system (so no malware running in the background drain resources). Windows Defender is a good PROGRAM. The new, free Microsoft Security Essentials http://www.microsoft.com/security_essentials/default.aspx is a great AV / AM program that has one of the least impacts on resources and the performance of the system, according to reliable sources and it does the job very well. If you are using MSE, you don't need really Defender (but you would with any other AV program). I suggest also download http://www.malwarebytes.org/mbam.php and it works every month to catch anything that might miss MSE/Defender.
If you follow these tips, and do this regularly (at least monthly), then I think that you will have faster to a machine as it is able to give material.
Perhaps one of the recovery programs will work (try Recuva if you have not already - this is a very good). It is possible that this only works with the data files and not with files system (which would explain why you're having without success) because I never used them to recover before system folders (I have always used the system restore).
Good luck! Lorien - a - MCSE/MCSA/network + / A +.
Tags: Windows
Similar Questions
-
My computer crashed the other day. I returned with a system restore. I have scanned for viruses. Now most of my icons (computer desktop and folders) is grayed out. When I click on "all programs" in the start menu, none is listed even though they are still on my computer and still work.
Hi homeWJ,
Method 1
See the Microsoft article below to download and install the fix, check if it helps.
When you point to "Programs" on a Windows XP-based computer, the program list does not appear, or the list of programs is empty
http://support.Microsoft.com/kb/941248
Method 2
If the previous step fails, then analyze and remove any malware or computer virus infections and check if that helps.
http://www.Microsoft.com/security/scanner/en-us/default.aspx
You can also use Microsoft Security databases to scan your computer
-
Where can I find "Windows Fax and Scan" if it does not appear under my "all programs"?
Where can I find "Windows Fax and Scan" if it does not appear under my "all programs"?
WIndows Fax and Scan is only supplied with Vista business, full and firm.
-
All programs of the cloud creative suite adobe when they open are locked and do not respond. Any solution? I already tried to uninstall and reinstall everything but does not work. Mac OSX Yosemite 10.10.5
Hello
Please see: -.
Errors ' Exit Code: 6, "" Exit Code: 7 "|"» CC, CS6, CS5.5
Hope this helps!
-
Arrange program shortcuts in the list of all programs on the start menu
If I organize my program shortcuts on the list of all programs from the menu start when I reboot they are all changed back.
As in, I move the "CyberLink PowerDVD 9" folder in the "Media" folder when I restart a new
Folder "CyberLink PowerDVD 9" is placed on the list of all programs on the start menu.
Now I have two folders "CyberLink PowerDVD 9" in all the programs one at the root of the list and the other in the folder 'Media' from the list.
How to stop windows 7 to change the list of all programs on the start menu?
Is it only occurs for the shortcut of CyberLink, or perhaps for each shortcut where you changed a location?
You can check this: Start > right click on all programs > you can select Open and open to all users > you can check is not listed in the two location?
Shortcuts usually appear at the previous location after a few updates to the specified application.
-
White screen on Windows Vista Start-cannot open all programs, even the Task Manager
Original title: white screen on startup of Windows Vista
Hello
I tried tirelessly fix my Sony Vaio computer that is running Windows Vista. After that I entered my password by logging into my account, the screen charge nothing; It is empty. I'm unable to open all programs, even the Task Manager.
I AM able to start safe mode. I tried MSCONFIG, removing all the programs of cleaning, power off start up programs, but nothing seems to work. Can anyone help? Thank you.
Hello
See if that helps you.
Do a Safe Mode system restore to before the problem started.
http://bertk.MVPs.org/html/restoresysv.html
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
If it doesn't, try a startup repair and / or a system restore using a DVD of Vista from Microsoft
Manufacturers recovery disks normally do not have Service Options; they are normally a relocation to the factory only settings option.
Here is the guide to repair Options using a Vista DVD from Microsoft.
If a friend or a work acquantance of yours has one, you can borrow and use it for repairs.
http://www.bleepingcomputer.com/tutorials/repair-Windows-with-Windows-Startup-Repair/
Table of contents
- Overview of Windows Vista repair options
- How to perform an automatic repair of Windows Vista using Startup Repair
- Advanced Tools Overview
- Conclusion
If you do not or can not borrow a Microsoft DVD there is a download of a file ISO of Vista Startup Repair available that you can put on a Bootable floppy to make the above startup repair and that the method is recommended by a large number of posters in these Forums.
Unfortunately, you have to buy it.
Here is a link to it:
http://NeoSmart.net/blog/2011/Windows-Recovery-discs-updated-reinstated/
See you soon.
-
Missing programs in all programs on the start menu in Windows 7
I have Windows 7 Home Premium SP 1 installed on my laptop. In recent weeks, I noticed that a lot of programs have disappeared from all programs in the start menu. If I dig up the program on my HARD drive so I'm able to find but it causes a lot of problems that the programs are not visible in all programs. Thanks in advance!
Thanks for the reply!
Yes, I had most of the programs listed in there, but some programs were missing...Such as PowerPoint and Word, etc were missing from the list of all programs...So what I did that I dragged the original MS Office program into the specified folder...I guess that is not automatic! -
Folder icon in all programs on the start menu
I tried to change the icons of the folders in all programs on the start menu. But after that, it has been restored. Nothing is left.
Hoping that windows can automatically display the icons of the programs installed on these files.
Hello
I understand that you want to change the icons of folders in the files shows all programs menu.
You can change the icons of folders which are displayed in the file Explorer, but these changes will not be reflected in the access to the start menu.
However, you can use some 3rd 3rd party apps that can help you to do the same.
Note: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.
Please refer to the article below for more information on the option of customization available in Windows 7:
http://Windows.Microsoft.com/en-us/Windows/personalization-Gallery
Hope this information helps, let us know if you need help with Windows.
Thank you.
-
Every thing seems to have returned to normal, but when I restarted my computer all the icons on my desktop and all programs in the start menu disappeared, and yet, all programs are always in: Control Panel > add/REMOVE programs. I can still connect to the internet by going to-Start > my computer > view > go to the desktop. How to get back all the icons on my desktop. I tried a click right, but in vain. I also ran a scan complete antivirus. any help would be appreciated.
Thank you Joel S. Before I could put your advice into practice a friend recommended a friend who advised me to do a system restore, which he said he would be happy to do it for me. So look like an easy option, I agreed. It seems to have solved the problem (fingers crossed), but now it seems that I need to format the hard drive. If you have any tips on formatting hard drive I'm all ears. Thank you Owen
-
How do you create a folder under all programs on the start menu?
I am on 7 and want to create a folder under all programs on the start menu to contain all my design programs. How can I do this? There is no empty space to click in the menu that appears on right-click and choose new.
Hello
@ sharon you can remove your message if you have understood the thread Q@cbr_foxIf you want to create the new folder in the start menuRight click on all programs< on="" newly="" opened="">< double="" click="" on="" programs="">< create="" new="">< rename="">< add="" the="" shortcuts="" of="" your="" programs="" to="" created="" folder.="">Now you can access the folder in the list of programs.Hope it solves your problem.Best regardsNikhilBlog:WindowsWorld -
I currently pay monthly to Premier Pro only. Is it possible to upgrade my plan to include all programs of the suite? If so, where is this link?
Please see this FAQ for more details.
Guinot
:FAQ: How can I change to a different plan of the creative cloud?
-
Creative cloud appear not all programs in the Application update area
I'm so frustrated with VAC. It was working fine and then he started acting in the last days and wouldn't show all programs on vertical updated list or what ever they call it just. Used all their tools to try to uninstall and clean everything, but it still do not work.
Hello
Follow please: App does not open. Wheel of progress turn continuously
Kind regards
Sheena
-
im running xp and Add/Remove programs will not let me delete all programs
im running xp and Add/Remove programs will let me delete all programs, nor does it show all of my programs
Hello
· You receive an error message or error code when you try to uninstall the program?
· Were there any changes made on the computer before the show?
Run the fix it from the link: Add/Remove Programs displays installed the tool incorrectly: http://support.microsoft.com/kb/266668
Add to that, I suggest to run online virus scan and check if any malware or virus detected on the computer activity. You can run the scan for viruses online from the link below: http://www.microsoft.com/security/scanner/en-us/default.aspx
NOTE: Make sure that you select the correct version of the operating system before downloading the scanner)
-
User account does not show "all programs" in the Start Menu in XP
When I press the Start button on my user account on my computer, the button that shows "all programs" is not there so I can't access any of the programs on my computer. What should I do to let me have access to all the programs here?
http://xperiencexp.blogspot.com/2005/10/all-programs-menu-missing.html
Try this link to see if it helps.
-
BlackBerry smartphones can not see Desktop Manager in my list of all programs on the start menu
I just installed the Blackberry Desktop Manager for Blackberry 7100i Nextel (version 4.1.0.376).
It does not appear under all programs on my Winxp start menu. It seemed to install correctly, but it just doesn't appear in the start menu. I removed it by following the instructions (requiring the removal of certain registry entries and files and more using Add/Remove programs in the control panel).
I reinstalled the program and it will not always be displayed on the start menu. I can run a couple of .exe files and run it manually, but I don't get the full program.
I am the administrator of my pc Windows XP Professional.
Any ideas on what could be the problem?
Hi and welcome to the Forums!
Yes, that would do makes a difference. For reference, the best procedure must first install the full package of DTM (what version you need for your PIM version if you plan to synchronize via attached USB/BT), then, at the top of the DTM installed, your bundle of BONES of carriers (which modifies DTM so that it can provide you with options that apply to you).
You can edit your previous post - but it's actually better not unless there is a real error needing correction. It is good to leave the wire in place just in case someone in the future should have a similar situation... so that they can find your description and solution and I hope to find their response without the need to post a new thread.
Oh yes, once you are sure that it is resolved, please don't forget to mark the thread as solved.
Best!
Maybe you are looking for
-
How can I remove this pop up on my iPhone *.
User of iOS CONGRATULATIONS! Your iPhone was chosen randomly as one of the first customers to have a chance to get the iPhone 6. Press OK to participate and get exclusive rewards! This appears when I'm in MyFitnessPal app and possibly other applica
-
I compare the photo of the new version of Firefox banner * shown on the "Getting Started" page to the old Firefox banner I have jave been employed for years.
-
I lost my Ipad around two years and just found in my closet. Somehow I'm all my photos out of it so now I'm fine with the restore so that I can use it again. I try to restore and update every time it starts for about 5 minutes, but then stops and say
-
Hello I am currently using sensor and I my VI begin when they are above a certain level. Is there a way to start a VI without clicking on the "Run" button? This would be a solution? Have a case of initialization Structure and do not arrive at the nex
-
I GET A "SERVER BUSY" MESSAGE WHEN I TRY TO SCAN
Whenever I try to scan a document, I get the message 'server busy' and ' switct on and try again. I can't delete the message without closing the program.