applications of low costs for an iPad merge & resizing JPEG images?

Are there free or inexpensive apps for an iPad 2 which can be used to merge, position and resize multiple JPEG images, and then save the results in a single JPEG image?

Thank you

Do a search in the iOS App Store for

Photo montage

and see what you find it would be better for you.

Good luck!

Tags: iPad

Similar Questions

  • Best method for resizing bitmap images

    I'm looking for a good method resize bitmap images to adapt to the constraints imposed by a container object with the size will change based on the dimensions of the browser window, etc. Basically, it must be able to evolve to adapt.

    I use the following to the resizing of height. «largeImage is a bitmap object.

    ratio = largeImage.height/newheight;
    largeImage.height = newheight;
    largeImage.width = largeImage.width/ratio;

    The problem is, the images look resulting slightly serrated and not really the quality I was hoping.

    Is there a better way to do this in as3?

    Add the following seems to greatly improve the quality:

    largeImage.smoothing = true;

  • remove the applications common for iphone ipad and listed in itunes

    With applications for iphone iPad and also listed in apps in iTunes how to remove them so that they do not yet appear?  Especially regarding the synchronization?

    You don't have to delete them from iTunes. You must deselect until you synchronize. Start iTunes and select your device in the upper part. Click the applications tab. The list of applications. Click on remove for all the apps you don't want to sync with this particular device, but who are already on the device. Then click on apply in the lower right. iTunes will remember for each device's sync settings that synchronize you to the same library.

  • Is it possible to use an application designed for iPhone/iPad on my iMac or (older) instead of the iPod touch?

    Sorry, I don't have an iPhone and I'm not a user app.  But I found one that I really want to get.  The description says that it is designed for an iPhone or an iPad.  Can I download it on my iMac and use iTunes to put on my older iPod touch?  Or just use it on my iMac?  Here is the app in question.  Thank you!

    iTunes does not sell at apps for your computer.  All applications are for iPhone/ipad/ipod.

    You will need to check the requirements for the application know what version of iOS is required if you want to use on your iPod.

  • Low-cost servers for virtualization

    I'm looking for 2 servers of low cost which supports x 64 and hardware assisted virtualization.

    I think that Dell PowerEdge T300 is in favour. How does Dell PowerEdge T105?


  • The AEC to Flash 10.3 is available only for low-COST airlines?

    Hello

    I wanted to know if Flash 10.3 AEC function is only available with ACC?

    The AEC swc file I see everywhere is one ACC. Are there the playerglobal.swc specific non - ACC or can we use the swc even where we develop a custom application and not by low-COST airlines?

    Any help is very appreciated.

    Thank you.

    LiveCycle is a Java server that you can integrate Flex. The same playerglobal.swc is used in Flex and Flash. Download the latest (FP11) http://www.adobe.com/support/flashplayer/downloads.html

    --

    Kenneth Kawamoto

    http://www.materiaprima.co.UK/

  • lower costs

    Hello

    I have a PalmOne, Zire 31. Looking to download games while I'm waiting at the Office of the drs (so to speak). If the package saids its its for Palm OS - is - it say that it will work for my pda--thank you very much for your help...

    Hello darlened and welcome to the forums of Palm.

    Most of the time, if an application or a game is written for Palm OS 5, it will work with your Zire 31.  That said, the Zire 31 is a Palm device low cost and has all the same features of the more expensive Palm PDA Tungsten E2 and TX.

    I suggest that you download and install the version of a demonstration/test before buying it and confirm on the website that the Zire 31 is supported.

    Alan G

  • Registration of the companies low-cost (RTMFP vs protocols RTMP/S)

    Hey everybody,

    I read through all http://learn.Adobe.com/wiki/display/LCCs/LiveCycle+collaboration+service and read through the forums (even in the FMS side that may be relevant http://forums.adobe.com/message/3345179#3345179 and http://forums.adobe.com/thread/736733 ).  As recording LCC is in beta is missing the right docs for now.

    Could you guys validate/invalidate my hypothesis on the registration of low-COST airlines:
    Note: we require Flash 10.0 and connect LCCS SWC (flash 10.0) currently

    (1) setting < rtc:AdobeHSAuthenticator id = "auth" username = password "{ourUserName}" = "{ourPassword}" protocol = "RTMFP" / > will do the following:
    (a) causes a P2P multicast (which in turn uses UDP and no communication at the service of SUPPLY) between customer sovereign Fund, which means no is / V record steam.

    (2) setting < rtc:AdobeHSAuthenticator id = "auth" username = password "{ourUserName}" = "{ourPassword}" protocol = "RTMPS" / > will do the following:
    (a) cause a TCP via server companies low-cost that will record the A / V broadcasts very well.

    3) what I'd do if we wanted to take advantage of P2P multicasting during the recording of the session of the ACC?  To do something like: http://forums.adobe.com/message/3345179#3345179 ?

    4) according to this: http://learn.adobe.com/wiki/display/lccs/09+Peer-to-Peer+Data+Messaging+and+AV+Multicastin g that we could make the P2P with Flash 10.1 multicast
    (a) maybe I am completely wrong in #1 and #2, and by requiring Flash10.1 for our application, I get the recording work using the RTMFP Protocol?

    Thank you
    Alex G.

    Hi Alex,

    OK - now, when you make P2P RTMFP streaming,

    recording does not work. To work around this problem, we recommended

    either disable RTMFP either by setting StreamManager.maxP2PStreamPublish to 0. In

    the latter case, you would still use RTMFP and UDP and so get most of the

    benefits.

    Answer each of your questions:

    (1) partially correct - RTMFP is required for P2P streaming, but not all

    RTMFP streaming is P2P. For example, once there are more than 3 beneficiaries.

    We automatically hub-and-spoke, because P2P becomes difficult for

    the publication server. You can control this threshold using the

    StreamManager.maxP2PStreamPublish.

    (2) correct. This is a temporary workaround solution - I prefer the 2nd

    workaround solution, using StreamManager.maxP2PStreamPublish = 0, which still allows

    the benefits of RTMFP without using P2P. In the next version, even if you are

    you use RTMFP, once you turn on the recording, he will argue as well

    all broadcast on hub-and-spoke (without change of RTMFP).

    (3) for the moment, there is no way to do P2P streaming with record

    permit. In the future (probably much later), we might have time to allow

    This, but it is quite difficult (perhaps not even possible) and it is not high

    as a priority.

    (4) it is important to separate these issues - requires no P2P RTMFP

    streaming. In fact, most of the benefits of RTMFP (mainly the fact that)

    It is based on UDP) works on the star network. What we have seen is that Multicast

    P2P (activated in 10.1 and rather than direct P2P) is often not a great

    choice for conversations, because multicast introduces a latency more than

    simply using hub-and-spoke.

    hope this helps,

    Nigel

  • For the iPad 2 air, what is the best app for note taking allows you to use a removable keyboard and a stylus? Which is also a stylus good to use?

    I am looking to buy an iPad 2 air to take notes in college classes and I was wondering what is a good software that allows an external keyboard (like a laptop) to type notes and also allows the drawing with a stylus? What is a good pen that is compatible with the app and the iPad 2 air?

    If you really want to use stylus to take notes or draw you should go for iPad Pro with Apple pencil. Nothing else offers good experience especially for hand writing. If you ok with drawing then only pencil FiftyThree is a good choice on iPad 2 Air (but again, it is much worse in my opinion, then iPad Pro + Apple pencil). FiftyThree is also one of the best (paper) apps for note taking (and it works well with their pencil).

    The keyboards are wide work system and not a dependent application. You can go for any model of the 3rd party like you which is compatible with iPad air 2. Advice covers the Apple Smart keyboard are specific to the Pro (they need specific for Pro iPad connector).

  • WhatsApp for mini ipad 2

    How to get the mini ipad 2 whatsapp application?

    Developer has not released a version for the iPad. Suggest that you contact the developer

    whatsapp for him to know that you want an iPad version.

  • Low cost brushless three-phase amplifier

    I use cRIO to request control phase brushless motor three specialty.  NOR has a NI 9505 module for control of motors brushed.  I have not found one for brushless motors.  There are a lot of controllers of third brushless motors integrated in the market.  Will not work for me.  I need to directly control the cRIO output transistors.

    I guess I'm looking for a low-cost three-phase bridge amplifier.  The low cost is necessary because it will be part of an OEM product.  The engine is rated at 40 volts and 10 amps.

    Does anyone have any suggestions?

    Here files gerber and the source files of origin for the Council that I built.  It was designed by EagleCAD, and the final design is drive1.brd.  I don't think that there is an error with this review of the Council, it should be good to go if you built it this way.

    Others that some of bridge-on-chip solutions that I found, there was no option for the units silent, low-power (disks without built control logic in).  Because I wanted to do my own development of control algorithms, it meant that I had to either crack open a trade route or build my own.  Of course, I went the second route.

    Good luck.

  • Measurement of low-cost input analog (4-20mA) with data acquisition

    Hello

    I would like to have a very low cost measurement system loop which I can plug in my laptop current:

    I have a load, which is connected to a circuit of air conditioning/signal booster, which output a 4-20mA. I want to measure this current loop signal.

    An idea for the lowest cost system? I think that the most NOR DAQ are too expensive and too exaggerated.

    I have LabVIEW.

    Use of remote sensing current low-value resistance, then measure the fall of voltage through it with the help of an acquisition of data 6008/6009?  They have about $150.

    You will probably need to amplify current-sense with a MAX4372 or similar resistance to achieve a result that allows you to use a reasonable scale on data acquisition.  I measure the current through our products in almost all of our equipment to test in this way.  The size of the resistance of meaning as a result.  The 6008 is accurate enough, but it is not the fastest nor well presented.  But starting at $ 150, they are hard to beat.

  • Wehre can I get Adobe line for my iPad?

    Wehre can I get Adobe line for my iPad?

    Thank you.

    There is no Adobe online application, perhaps looking Draw Adobe (Illustrator) or Adobe (Photoshop) sketch? Both can be found in the Apple store (apps).

  • Can I restore draw Adobe version 3.0 for my iPad Pro?

    Can I restore draw Adobe version 3.0 for my iPad Pro? My Creative Wacom stylus does not support the 3.1.1 is supported in version 3.0. The pencil to Apple does not work for me because of the inability to control the line with plastic on the glass due to carpal syndrome and a trembling hand. The trail of the tip of the pen of Wacom Creative rubber is the only pen that works for me and there is no other application that does the job. I draw live caricatures at events and do not have time to fix the wobbly lines. It defeats the purpose of buy me the Pro.

    Jeannette,

    You could probably go back to an older version if it still exists in your iTunes (not on iCloud) account. You need to uninstall the new version of your iPad Pro disconnect your device and your computer from the Internet and synchronize your device (via USB) to the version which is located on your computer.

    Sue.

  • I want to Lightroom6 instead of Lightroom5. What should I do, so I do not pay my monthly cost for each of them?

    I want to Lightroom6 instead of Lightroom5. What should I do, so I do not pay my monthly cost for each of them? I want to replace it. What should I do?  I have with photoshop Lightroom packadge.

    Edgars salvation,

    I checked with your Adobe ID on the forums, you have an active subscription to Photoshop and Lightroom CC.

    6 of Lightroom is a version of the Adobe product serial number, the same product is known as Lightroom CC in the case of a subscription.

    Please visit this link to learn how you can download your app:download and install Adobe Creative Cloud applications

    Also please check the system requirements here: system requirements for Adobe Lightroom for Mac OS and Windows

    Let us know if that helps.

    Kind regards

    Bani

Maybe you are looking for