Apply to all functions of question responses

Similar Questions

• 'Question by default comments' does not apply to all the quiz presenter 7.0.7

  I read a manual adobe note that:

  "Note: . " If you change the default label, feedback from the issue of the messages also change for questions that have already been created '

  And that's just for Presenter 7.0.

  But when I change 'Default Labels' in presenter 7.0.7, only Question button labels apply to all quizzes during the message Question not. The effect will run only the tests that I create after a change of information in "default question Feedback." Perhaps this is mistake of presenter 7.0.7?

  Please tell me if anyone has these experiences.

  It was something that happened in 7.0.0 to 7.0.2 (I think). Then the product has been updated with day/fixed to keep the feedback boxes that they were after the slide has been created. It was then that you were able to customize the rear power, and not to lose the customization during the change of the default label (or anything else in the Quiz Manager also).

  So you see only not the feedback change in 7.0.7, I think is the correct functionality.

• can I move all functions to another monitor and still close the laptop without turning off the second monitor on a laptop

  can I move all functions to another monitor and still close the laptop without turning off the second monitor on a laptop

  You define 'Action close lid' to the 'status quo' instead of sleep or Shut down:
  Go to-> double click "Power Options" Control Panel-> 'Select a power plan' under your selected plan, click "Change plan settings"-> "Change plan", click on the blue link 'Change advanced power'-> in 'Advanced settings' tab expand "power buttons and lid"-> extend the action of the 'close' lid, set "on battery" and "Plugged in" to "Do nothing"-> click apply-> OK button

  Multiple monitors: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/multiple-monitors-frequently-asked-questions

  Set up multiple monitors
  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-multiple-monitors

  Move windows between multiple monitors
  http://Windows.Microsoft.com/en-us/Windows-Vista/move-Windows-between-multiple-monitors

  Understanding multiple monitors
  http://Windows.Microsoft.com/en-us/Windows-Vista/understanding-multiple-monitors

• How this box apply to all Documents?

  I don't know that it's probably an easy question.  I added another check box (apply to all Documents) and when his I want the changes to the selected control boxes below display for all open documents.

  var RunCH1, RunCH2, RunCH3, RunCH6, RunCH8;
              RunCH8= app.documents[0],  
              allPagesMaPref = RunCH8.pages.everyItem()  ;  
              RunCH8= w.tabs[1].add ('checkbox {text: "APPLY TO ALL DOCUMENTS"}');
              RunCH1= w.tabs[1].add ('checkbox {text: "Find and Replace"}');
  

  Thank you in advance.

  Fixed a few typos but basically your "everything/nothing" checkbox is a modifier for the source object on which the changeGrep function call.

  OK you have a lot of material now, so it's up to you now.

  //Our Pseudo Event Class
  var EventManager = function()
  {    
  
    //Our internal key object
    var o  = {    
  
    };    
  
    //return the Event Manager API
    return {    
  
    //Add a listener to the class for a specific event
    addEventListener:function(name, handler) {    
  
    //Return if the supplied handler already belongs to the listened event
    if ( this.hasEventListener (name, handler) ) return;    
  
    //Adding the handler for the event
    o[name] = o[name] || [];
    o[name][o[name].length]=handler;    
  
    },    
  
    //Executes every handler attached to the event
    //passing data as argument
    dispatchEvent:function(name, data) {    
  
    var n, i=0;     
  
    //Return if no handler is set
    if ( !o[name] || !(o[name] instanceof Array) || !o[name].length ) return;    
  
    n = o[name].length;    
  
    //executes every handler
    for ( i = 0; i		   

• Applies to all in Captivate 5.5

  Hi, I've been using Captivate 4 for a few years and I am to evaluate v.5.5 for an upgrade, but still I am facing some problems.

  When you change text, questions and answer fields legends, I can't 'apply to all' properties general character and Format.

  In CP 4 in Properties window it was a field 'apply to all', is there an equivalent in CP 5.5? or should I do the chages slide by slide?

  Thank you

  Ennio

  Hello

  The option apply to all not always worked very well, that I remember.

  CP5.5 has now object styles and style of object manager. You can set these styles for all new projects, if you open the Manager before opening a file, or set up in a project file.

  If you want to change all the legends after creating them in the default caption Style, change the style of a legend to your wishes, a + sign will appear next to default caption Style in the PI (see screenshot, highlighted in yellow). Then use the button with the floppy disk (highlighted in green) to record what the default style and all the legends that had the default caption Style automatically gets the same formatting.

  

  Some accordions in the PI have a small arrow curve upper right, which can be used to only apply aspect to all objects with the same style or same type, similar to the functionality that you spoke of CP4, but now it still doesn't work

  

  Lilybiri

• Performance of the hard drive, runs at 30% all the time; slow response

  Pavilion Slimline works 30% all the time, slow at times, all the time. Run the Task Manager, identified all of the questions.

  Defragmentation, historical, navigation can be run. Registry cleaner also run.

  Still slow responses,

  Suspect still running games, must stop them, as well as other unnecessary programs.

  Any suggestions, useful, believe, this will solve the problem and improve poor performance.

  Thank you for the comprehensive answer. If the speed is the main problem now, theoretically, upgrading the hard drive would be able to increase the speed up to a point. Of course, this would impact speed of normal programs, programs on the web, etc. I also carefully read the document provided Red Rose, and although it is informative, I don't know about most in this paper has been tried.

  Regarding the age of the laptop, age obviously decreases the computer's full performance, and you have little control over this, unless you buy another computer.

  I have an idea of how research and troubleshooting have achieved you, but it is only an idea. I'll link some documents with information that you may or may not be useful:

  http://Windows.Microsoft.com/en-CA/Windows-8/improve-performance-optimizing-hard-drive

  http://itzkumar.WordPress.com/2010/07/03/10-ways-to-increase-hard-disk-life-and-performance/

  Let me know if you have any other questions, and I'll do my best to help you.

  Mario

• dimmed folder "Apply to all folders" view

  For some reason any default folder view changed something I certainly won't.  However, when I go to "Folder Options" to change the display by default, the option "apply to all folders" is grayed out.

  Why is this?  How can I change the display of files by default to what I want?

  Thank you.

  Hi Laurei,

  Thanks for posting in the Microsoft community! You have reached the right forum for your question.

  Method 1
  I suggest you try the steps from the following link:

  How to modify your folder view settings or customize a folder
  http://support.Microsoft.com/kb/812003

  Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article: http://support.microsoft.com/kb/322756

  Method 2
  I suggest you perform the clean boot and check if the problem persists.

  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353
  Note: Make sure that you reset the computer back to normal once the diagnosis is complete.

  Hope this information is helpful and let us know if you need more assistance. We will be happy to help.

• Whenever I have customize a folder in Windows Live Mail, the changes are applied to all files and not only that I specified.

  When I started using Windows Live Mail, I am sure that everything was OK. I have 4 email addresses and when I started ' Customize I'm went to SEE, COLUMNS and adjusted to the order of the columns and to check the column or not. If I'm creating the Inbox of course I want 'FROM' but not 'To' as it is me. If I'm creating for "SENT" I want 'TO' but not 'FROM' for similar reasons. My problem is that when I put in a category, it seems to apply to all categories. What I am doing wrong?

  ICDXZ

  original title: column display

  Hello

  The best place to ask your question of Windows Live is inside Windows Live help forums. Experts specialize in all things, Windows Live, and would be delighted to help you with your questions. Please choose a product below to be redirected to the appropriate community:

  Windows Live Mail

  Windows Live Hotmail

  Windows Live Messenger

  Looking for a different product to Windows Live? Visit the home page Windows Live Help for the complete list of Windows Live forums at www.windowslivehelp.com.

• Select tray 2 as the main tray for all functions

  I use the top tray for odd size media and want to set the lower plate (#2) in the Lac main for all functions presented. How this is done on my Officejet Pro 8600 Premium?

  Hello

  This can be done in the control panel of the printer and printing software

  To set up the trays

  in your PC

  1. you must select the option Auto tray in the printer software. If the printer is on a network

  and you set a default bin, the setting affects all users of the printer.

  On your printer

  1. make sure that the printer is turned on.
  2. tap (right arrow), press Setup, tap preferences and then select default
  Tray or tray Lock.
  3. click on OK or apply after changing settings of the desired tray.

  Above measures avaialbe in the manual, please see page 32 in http://h10032.www1.hp.com/ctg/Manual/c03026243.pdf

  Good impression

• How to set the parameter "Apply to all folders" never works?

  Should we wait for an SP1 update or something?  It worked fine under XP!  He is broken in Vista and I was hoping that Microsoft fixed in 7 but it still does not work?

  I just want all my files in the LIST format display everytime I open a new window to the Solution Explorer, but no matter how many times I click "Apply to all folders", it does not work.

  TAGS: change, default, view, windows Explorer

  He asked how to apply a setting to all folders. You said how to define a view in a folder TYPE (which, btw, does not seem to work either). If you do not answer the question, why say anything at all? : P

  Microsoft is always disappointing me. I just bought a laptop with Windows 7 and I can't do a lot of things I did in XP (the configuration mentioned above, for example). I don't understand why they would remove operating characteristics, good. But they do... :(

  See http://en.wikipedia.org/wiki/List_of_features_removed_in_Windows_7 for a reference.

• Anlytical & Windowing function logic question

  All,

  Last question, I promise you

  
  I have often wondered why the below SQL never works how I think,

  You would think he would return the average value on Monday and Tuesday, according to the partitioning parameters (i.e. the ddate + 1 offset), but it doesn't!  He only brings the average for Monday.

  Anyone know why?

  For the query wait below:

  1 av_measure_value_mon = 5 (which does)

  2 av_measure_value_tue = 6 (which it doesn't not it returns 5 (of Monday))

  WITH tblData AS
  (
      SELECT  1 AS measure_value, TO_DATE('01/01/2015', 'DD/MM/YYYY') AS ddate FROM DUAL UNION ALL -- Thu
      SELECT  2, TO_DATE('02/01/2015', 'DD/MM/YYYY') FROM DUAL UNION ALL  -- Fri
      SELECT  3, TO_DATE('03/01/2015', 'DD/MM/YYYY') FROM DUAL UNION ALL  -- Sat
      SELECT  4, TO_DATE('04/01/2015', 'DD/MM/YYYY') FROM DUAL UNION ALL  -- Sun
      SELECT  5, TO_DATE('05/01/2015', 'DD/MM/YYYY') FROM DUAL UNION ALL  -- Mon
      SELECT  6, TO_DATE('06/01/2015', 'DD/MM/YYYY') FROM DUAL UNION ALL  -- Tue
      SELECT  7, TO_DATE('07/01/2015', 'DD/MM/YYYY') FROM DUAL UNION ALL  -- Wed
      SELECT  1, TO_DATE('08/01/2015', 'DD/MM/YYYY') FROM DUAL UNION ALL  -- Thu
      SELECT  2, TO_DATE('09/01/2015', 'DD/MM/YYYY') FROM DUAL UNION ALL  -- Fri
      SELECT  3, TO_DATE('10/01/2015', 'DD/MM/YYYY') FROM DUAL UNION ALL -- Sat
      SELECT  4, TO_DATE('11/01/2015', 'DD/MM/YYYY') FROM DUAL UNION ALL -- Sum
      SELECT  5, TO_DATE('12/01/2015', 'DD/MM/YYYY') FROM DUAL           -- Mon
      
  )
     SELECT ddate,
            TO_CHAR(ddate, 'Dy') AS dday,
            av_measure_value_mon,
            av_measure_value_tue
       FROM (
         SELECT   ddate,
                  ROUND(AVG(measure_value) OVER ( PARTITION BY TO_CHAR(ddate, 'Dy')), 2) AS av_measure_value_mon,
                  ROUND(AVG(measure_value) OVER ( PARTITION BY TO_CHAR(ddate + 1, 'Dy')), 2) AS av_measure_value_tue
            FROM  tblData
      )
      WHERE   ddate = TO_DATE('12/01/2015', 'DD/MM/YYYY')
  ;
  

  Hello

  Analytic functions, perhaps not the best solution for this problem.

  For this problem, you might be better off using the aggregate AVG, not the analytical function, as this function:

  WITH got_avg AS

  (

  SELECT TO_CHAR (ddate, "Dy") AS the dy

  ROUND (AVG (measure_value)

  2

  ) AS avg_measure_value

  OF tbldata

  GROUP OF TO_CHAR (ddate, "Dy")

  )

  SELECT t.ddate

  , TO_CHAR (t.ddate, 'Dy') AS dy

  a0.avg_measure_value AS avg_today

  a1.avg_measure_value AS avg_tomorrow

  OF tbldata t

  JOIN got_avg ON a0.dy = TO_CHAR (t.ddate, 'Dy') a0

  LEFT OUTER JOIN got_avg ON a1.dy a1 = TO_CHAR (t.ddate + 1, "Dy")

  WHERE t.ddate = TO_DATE (December 1, 2015 ', "DD/MM/YYYY")

  ;

• BI Publisher, what should I do if I want to when I apply the change on one report, it will be automatically applied to all reports

  Hello everyone

  I'm about to a comprehensive set of reports, the number is around 200 reports.

  I have this question or concern, which is "If the client after the construction of all the reports changed his mind and wanted to change the logo or small change."

  How can I do if I want to, when I make a change, it will be applied on all the reports?

  for example when I want to change the logo I don't have to go edit one by one, just once on the parent or master report and this change will be applied to all the reports

  Thanks for the tips

  Use the template of sub for your header or footer.  Create your report without header/footer, then call the sup of it model.

• Expert SQL 1Z0-047: all functions are examined or just groups?

  Review of press of Oracle book says that all functions can be included in the review (Chapter 6 use of the box shows a row functions p.234 review)
  and reffer the manual reference
  
  And as I see the book and review group (Aggregate), specific einreihig, date on which the ordinary functions of Expressions and page are reviewed.
  

  With the help of line features unique to customize the output
  
  Describe the different types of functions that are available in SQL
  Describe the use of the conversion functions
  Use of character, number, date functions in SELECT statements
  -Describe the use of functions of Group
  Identify the Group functions available
  Use the group for aggregate functions
  -Use datetime functions
  -Regular expressions

  of the foregoing, I guess that the bellows are out of the review
  XML
  Data mining
  
  So what really are the functions examined gtoups?

  So what really are the functions examined gtoups?

  Nowhere (or at least anywhere outside the Oracle education) is a list of all of the specific functions that will be under review. Besides, "will be" more properly would be written "could be" since all takers single review never sees all possible questions. A given function may be on the test for some people and not others.

  When deciding on what features to include, what I've done (and I suppose that Steve did) was to look through the different functions of a specific type (i.e. conversion functions) and the weight of each based on how the function is common in my experience. I have included these functions which I consider to be seen more often and so that no matter what SQL expert expected to know on top of their head. That said, the review Expert SQL takes pleasure in the dark. I've seen this most often in variations of syntax, but it is possible that review manufacturers choose a function to include simply because it is rarely used. While I don't remember all these appearing on the exam that I took, I can't exclude that possibility and so my guide at the end of the functions section States it much more listed there in the SQL Reference Guide which peuvent appear in the review.

  That said, learn the ins and outs of more functions that you might really need to review is not a bad thing. Because you indicated that you are interested in the real expertise rather than the skills of paper, limit you just to the focus of the review is not intuitive. I guarantee you there are a lot of things I know about SQL for years to work in the language that are not on the subjects of examination.

• can I select a default font for menus dvd-'apply to all '. 2 selection doesn't seem to work.

  in Pre12 should I do to select a font by default for menus dvd-'apply to all... '. 2 selection doesn't seem to work. I want to use times new roman for everything and it's a pain scroll through the list of fonts for each title.  OR Alternatively - delete a large number of fonts in the list?

  grantham8

  What version of Premiere Elements you are using and on what computer operating system is running?

  The answer to your question "Pre12 can I select a default font for menus dvd.

  as I see that's no (any version).

  These are fonts, fonts siize and font color in the PSD file of the theme that is being back from the movie first elements Menu customization area. Either:

  a. do you the menu customization possibilities they present

  or

  b. If you want to than this menu always present with all by using the desired font, and then change PSD file of the theme on the hard drive (with Photoshop CS or higher).

  It is my understanding that Premiere Elements uses the fonts are fonts of Windows. Even if you could selectively delete all fonts in a given menu, I think that the end result would be a menu that didn't work rather than one that is lacking in your policy of survival because there was no other to select.

  Yet once, the police of a particular topic is predetermined by the police which was designed in the .psd for the menu file.

  If you want information on how to change the fonts of your theme at the .psd level, let me know the involved menu and details the police change., point by point, buttons, titles...

  Please review and consider.

  Thank you.

  RTA

• Apply to all instances of a class

  Hi all. My question is simple.
  I have a class:
  

  Quote:
  class Test extends MovieClip
  {
  public static var hexColor:Number = 0 x 000000;
  
  var box: MovieClip;
  
  function Test()
  {
  This.init ();
  }
  
  function init (): Void
  {
  var colorObj:Object = new Color (this.box);
  colorObj.setRGB (Test.hexColor);
  }
  }