Appreciate direction correct forum, as if to suggest an emoji Aladdin Sane if necessary
I would suggest the creation of an emoji Aladdin Sane, if appropriate?
Tintinrocks wrote:
I would suggest the creation of an emoji Aladdin Sane, if appropriate?
Sorry, apple is not responsible for the manufacturing of emoji.
Using google and you will know that, then you can let them know.
Tags: iPhone
Similar Questions
-
Follow the instructions in MS, but is unable to perform a backup.
Hello
You can follow this link and check if the problem persists.
An Error Message appears when you try to use the Automated System Recovery Wizard
Hope the helps of information. Please post back and we do know.
Concerning
Joel S
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
SG300. installation aid
Hello
So here is my current setup & I'll type this out better than I can.
I have a modem from my ISP (1 ethernet port) which is running on DHCP & a Cisco Asa5505 who is doing DHCP for my devices connected to my layer 2 switch the 192.168.1.x subnet & a just cheap WAP do wifi internal.
I recently bought a SG300 - 10 p that circumstances would require me to connect a 2nd ASA and would need a 2nd port to the outside world for work (what they would give me a WAP & IP phone). Has changed & I currently do not know where to go from here insofar as all snap & Im fairly new to the network.
I converted the Layer 3 switch and the latest firmware. I have Setup several VLANS on the switch & DHCP for each Vlan.
192.168.2.0 network PC
192.168.3.0 network server
192.168.4.0 network wireless
192.168.5.0 network Wifi comments
I have Setup Port 10 as an uplink to the layer 2 switch allow to VLAN 2,3,4. I still need to configure the switch of layer 2 with the information of Vlan, if I can score some ports to get the right IP addresses.
I have Setup Port 3 as a trunk for Vlan 4 and 5 (I have to configure the WAP more late which is pretty easy).
Here's where I'm stuck:
Currently my SG300 - 10 p is configured with an IP address of 192.168.1.x
It would be more logical to have the ASA as my router connection between the Modem and the SG300 - 10 p of the 192.168.1.x network, or I would be better to have the modem plugged into the SG300 - 10 p then have the ASA on one of the ports? One day, I wish I could use my 5505 so that I can VPN into my network (a ball of wax) quite different for another weekend.
I would like to have all the networks have access to the Internet.
I want to limit the wifi network invited to see the other networks other than the Internet.
I think that covers pretty well and I want to just make sure I get configured right and all connected directions correctly. Any help or suggestions are appreciated. I want to make it as easy as possible with the best solution for scalability if work decided to give me another SAA again.
Thank you
Don
I'd go modem > ASA > SG300. The SG300 should have a default route to the ASA and ASA will need roads for each subnet pointing the SG300 so that he knows how to get back. I hope that helps you in a certain direction.
-
Any way to restore last manual sort order or prevent to be overwritten accidentally?
Help!
I'm constantly accidentally overwrite created carefully manually sort order (sometimes hours but more often months of accumulated work) in folders with file numbering up to 1,000, when I have, however, in short, switch to another sort order (size, date modified etc.) to check something, forget immediately that I am in a different sort order and without thinking (actually, I guess I think about a lot of other things) drag a file to another position, it destroyed immediately after hand sorting, I established, overwhelming with this new hands-on inadvertently.
I tried CommandZ (modif cancel) but that only cancels my latest rating or labelling, I rushed to force quit bridge through the montior activity in the hope I will catch him before his crushed, but obviously I'm not as fast as a computer, and I don't think it has always worked.
Is there a way or any script that someone wrote to officially record a manual sort order? Is there something that I missed in an attempt to restore? Has anyone, foiled repeatedly by the present, writes something that could give a warning and I will confirm say for example, if I tried to drag or move a file while in a different sort order (this seems to be something that must have existed the minute has been given the opportunity to create an organisation manual). Anyone would be willing to?
Seriously, forget me almost everytime won't change and more dilapidated, it has even happened when I didn't spend anything that clumsy momentarily while in a different sort order. I think that most people could forget because that (in the context of the computer), we are conditioned to expect one caveat if something that we just created is about to be overwritten or discarded, and since there is no option to save a manual ranking officially we just created.
Also, if it was in the real world, moving a single file would not overhaul everything on your desktop. If I had the ability to save a manual organization officially I WON'T forget to do and would use, I wanted one every time I spent some time rearrange files. Knowing how easy, it is every hour (much less months and years of cumulative work) for organization's work can be accidentally lost makes working within unpleasantly anxious bridge.
I am literally ready to do anything , including the installation of some scripts from 3rd party summary (but honestly I have no idea what that means or how to do it). Extentively, I use and rely heavily on this feature, so it is the heel of a pretty serious Achilles. It's like watching your team meticulously built collapse of the House of cards with a sigh imprudent, but innocent, or as having the equivalent of a cat not even charming dance on your keyboard for a live concert, etc etc...
Also it is not usually appropriate, given the context, batch rename all to preserve a control sequence numbers w manual, etc. Often the names of files are significantly (but necessarily, to evoke significant differences) since a long time already and when I have to rearrange things in the future would be obliged to do that every time, etc., etc., for even more heavy filenames which had no background information at the beginning. I'm looking for a way to make this function (manual sort order), well, more functional, safe and stable, workarounds I considered as cause too many additional problems.
I thank in advance for any help, you may be able to offer, and as this is my first attempt to use forums that I vivre living on a boat without a regular net access, appreciate all corrections forum etiquette and excuses for misspellings, Dyslexic and spell check doesn't seem to work in this interface. next time will change in program external wordprocessing beforehand,
Li ' l mc szpf
P.S. I'm on a mac w 27 "CS4 Design Premium, w up to the minute BONES (10.6.8) and the Adobe software updates installed recently (I don't often move the monster but this week has been housesitting w net access, so she had all recommended shots and vaccinations...)
PPS I know that most of you all could run the newest and later of everything, but I'm fairly certain that it is still a problem in recent versions, as has happened to me at school where all Macs are running cs5. But if it is remedied somehow in cs6 update suite together just to fix this a Bridge. I tried a lot of research and found nothing relevant or does not bother the considerable expertise and resources of an official forum, was extremely reluctant to ask (dreaded is broken in for pinout unintentionally etiquette forum), but it truly is the bane of my existence of significant bridge, so was willing to risk the imaginary censure and opprobrium...
Post edited by: PECourtejoie
It of a good question, for it requires two functions and a reboot of the bridge all done automagically
Copy and paste the script in ExtendScript Toolkit
It is installed with Photoshop and you will find: -.
PC: C:\Program Files\Adobe\Adobe utility
MAC:/Applications/Utilities/Adobe utilities Starting point
PC: Edition - Preferences - Startup Scripts
Mac: Startup menu - Preferences - Adobe Bridge ScriptsAt the bottom, click on the 'reveal' button it will open the folder where the script should be saved.
Close and restart Bridge.
Accept the new script.To use:
Tools - backup sort manually
It backs up the hidden file manually sort. BridgeSort to. BridgeSortSaveTools - restore manually sort
This copierait the. BridgeSortSave back to BridgeSort and will close and restart of the bridge so that the manual sorting is restored.if( BridgeTalk.appName == "bridge" ) { var backUpManSort = new MenuElement( "command","Backup Manual Sort", "at the end of Tools" , "backupms" ); var RestoreManSort = new MenuElement( "command","Restore Manual Sort", "at the end of Tools" , "restorems" ); } backUpManSort.onSelect = function () { var fileSort = new File(app.document.presentationPath +"/.BridgeSort"); var fileSave = new File(app.document.presentationPath +"/.BridgeSortSave"); if(fileSave.exists) fileSave.remove(); fileSort.copy(fileSave); fileSave.hidden=true; } RestoreManSort.onSelect = function () { var fileSort = new File(app.document.presentationPath +"/.BridgeSort"); var fileSave = new File(app.document.presentationPath +"/.BridgeSortSave"); if(!fileSave.exists){ alert("No backup file exists"); return; } app.document.sorts = [{ type:"string",name:"document-kind", reverse:false }]; if(fileSort.exists) fileSort.remove(); fileSave.copy(fileSort); fileSort.hidden=true; app.document.chooseMenuItem("mondo/command/new"); app.documents[0].close(); app.document.sorts = [{ name:"user",type:"date", reverse:false }]; }
I hope it works for you.
-
FORUM, counters ok? Helpful answers available: 5 correct answers available
Comes to the counters for threads in message ok?
It shows "* helpful answers available: 5. correct answers available: 1." * for multiple messages. "
rgrds PaavoHello
I don't know =) maybe you start the new thread on the community forum your comments and Suggestions
Community feedback (no product Questions)Kind regards
Jari-----
http://dbswh.webhop.NET/dbswh/f?p=blog:Home:0 -
WinDBG is unable to download the correct msxml4.pdb file.
I am trying to scan a file dump with Windbg. I get a PDB file not found error for msxml4.dll. Is there a PDB file for this version somewhere, or how I can work around the error and analyze the dump without a pdb file file.
News of WinDbg msxml.dll version below.
0:000:x 86 > .reload /f msxml4.dll
SYMSRV: d:\symbols\msxml4.pdb\2353E416F0BF4942B20CC99B6EE6909B1\msxml4.pdb not found
SYMSRV: http://msdl.microsoft.com/download/symbols/msxml4.pdb/2353E416F0BF4942B20CC99B6EE6909B1/msxml4.pdb not found
SYMSRV: d:\debugbin\msxml4.pdb\2353E416F0BF4942B20CC99B6EE6909B1\msxml4.pdb not found
DBGHELP: msxml4.pdb - file not found
ERROR: The symbol file is not found. Defaulted to export symbols for msxml4.dll.0:000:x 86 > lmv m msxml4
start end module name
54e30000 54f8e000 msxml4 (export of symbols) msxml4.dll
Loaded symbol image file: msxml4.dll
Image path: C:\Windows\SysWOW64\msxml4.dll
Image name: msxml4.dll
Timestamp: Thu Nov 08 11:30:18 2012 (509C084A)
CheckSum: 0015A3A9
ImageSize: 0015E000
File version: 4.30.2117.0
Product version: 4.30.2117.0
Flags of the file: 0 (mask 3F)
Folder OS: 40004 NT Win32
File type: Dll 2.0
File date: 00000000.00000000
Translations: 0000.04b0
CompanyName: Microsoft Corporation
ProductName: Microsoft MSXML 4.0 SP3
InternalName: MSXML4.dll
OriginalFilename: MSXML4.dll
ProductVersion: 4.30.2117.0
FileVersion: 4.30.2117.0
FileDescription: MSXML 4.0 SP3
LegalCopyright: Copyright (C) Microsoft Corporation. 1981-20080:000:x 86 >. LMI msxml4
Loading Module Info: [msxml4]
Module: msxml4
Base address: 0000000054e30000
Image name: msxml4.dll
Type of machine: 332 (I386)
Timestamp: 509c084a Thu Nov 08 11:30:18 2012
Size: 15e000
CheckSum: 15a3a9
Features: 2102
Directories of debug data: pointer of Type size WILL
CODEVIEW 23, 24748, 23b 48 SDDR - GUID: {2353E416-F0BF-4942-B20C-C99B6EE6909B}
Age: 1, PDB: msxml4.pdb
Image type: MEMORY - Image read correctly loaded memory.
Symbol type: EXPORT - PDB not found
Load report: exporting symbolsHello Greg,.
Thanks for posting your question on the Microsoft community.
This question fits better to the developers on MSDN forums.
I suggest you post your question on the MSDN forums for better assistance,
MSDN forum
https://social.msdn.Microsoft.com/forums/en-us/home?Forum=vsdebugThank you
-
Question of BitLocker - password is Correct, but does not seem to drive
Hello
My Western Digital portable hard drive is encrypted using BitLocker and the WD password. After the launch of WD Unlocker and successfully enter a password, the prompt unlock BitLocker will automatically launch. I enter the password. The quick screen disappears which suggests that it was operating normally, but I don't see the available drive in the menu 'computer '. What I see is the Western Digital Unlocker, I had entered correctly before the automatic launch of BitLocker.
Any help would be appreciated!
Thank you.
Hello
Thank you for visiting the Microsoft Community Forum.
I suggest you to send your query on the Microsoft TechNet Windows 7 security forum. You can get more effective suggestions and adapted by experts familiar with this topic. Your understanding is appreciated.
Security in Windows 7
http://social.technet.Microsoft.com/forums/en/w7itprosecurity/threadsIn the meantime, you can take a look at the Microsoft articles below, these suggestions may help you:
Using the repair tool BitLocker to recover a drive.
http://TechNet.Microsoft.com/en-us/library/ee523219 (v = ws.10) .aspx
BitLocker Repair tool
Using the viewer of password for BitLocker Active Directory recovery to view the recovery passwords.
http://TechNet.Microsoft.com/en-us/library/ee523220 (v = ws.10) .aspx
Turn off the drive (Windows 7) BitLocker encryption.
http://TechNet.Microsoft.com/en-us/library/ee424315 (v = ws.10) .aspx
Hope this information is useful. Please write us back to the case where you are facing in the future any other problem with Windows.
-
Illustrator art Council moves to the right of the app and disappears. I'd appreciate the help. I rebooted the software and then my macbook pro, nothing works
[Ask in the correct forum allows... Left non-technical Forum Lounge for forum specific program... MOD]
MacBook is the material.
Is what system this?
Any improvements installed in the system? Well is the material?
-
Premiere Pro CC 2015 - application of clip and rendering (three-way) color correction
-Every tutorial I see said: 'Drag the clip on the timeline and drag the effect to the element' - and in fact, when I do that, the clip changes color, indicating that the effect has been applied, I guess. But then the color correction controls do not seem to enable editing. I guess I sort of myself painted in a corner UI by freezing the arrangement of the components (or something - have no idea and don't hit FWIW, no button or options which do not seem to have the effect of blocking the UI) so that the color correction controls are hidden. I know it sounds like a silly problem, but I would greatly appreciate a clue, if you have any suggestions to offer.
If you have your clip on the timeline and apply the color corrector effect three way, once you have dragged the effect to the clip with the clip still highlighted (selected) on the timeline, click the effect options panel.
MtD
-
I have tried everything I know how to do: run in compatibility mode, uninstall, update from 4.1 to 4.3, repair of chkdsk, ideas, searched the forum and online, many suggestions but nothing works. I hope someone can help, I'm on a shooting trip and I'm dead in the water. Photoshop and Bridge and everything work fine. I was running Lightroom very well too, then one day I got the error and it has not opened since.
Thank youA search of this forum for 0xc000007b would have easily found the answer.
http://helpx.Adobe.com/Lightroom/KB/error-Unable-start-correctly-0xc00007b.html
-
Is it appropriate to the forum for...
We are about to launch a product, and I would like to know if it is OK to use this forum to determine interest, send a link to a demo and ask what would pay a reasonable price for people?Many web developers regularly post links to their products here - usually
downloadable software and/or extensions instead of systems or services.
which are of direct interest to the users of Dreamweaver.Most of the product links seem to be useful to the visitors of the forum.
I suggest you just after a URL and a brief overview of your product and
explain what comments you are looking.Those who are interested can visit and comment.
--
ConcerningJohn Waller
-
How do I correct/adjust the FPS in GTA IV.
the display of my installed GTA IV with persistence stutters. I have a vista HomePrm SP2 (32-bit) system with a NVIDIA GeForce 8400GS card (512 MB). I put the video card for 'performance' and grafix to medium-high to high heat. I ran the test option in the game which showed a 5.7 fps! but impossible to locate any fps option. pl help.
Hi arvipat,
Thank you for using answers Forum.
I suggest to update your video card drivers by visiting the manufacturers website and download the latest drivers to reinstall the device with. You may be able to adjust the FPS using the ATI software/driver, you will need to check with them.
You will need to read the documentation that came with your game to find more information about the setting procedure.
Please let us know how it works.
Chris
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
Hello
Windows Update on the Windows 2008 R2 server always indicates the KB2272691 update is available at the facility.
The update has been installed the first time on 26 August and reported a State of installed successfully. The next day, I checked WSUS and he pointed out that this machine still has this update. I logged on the computer and the real, Windows Update showed that this update is ready to install, I checked the history of update and the update has been successfully installed the previous day. I installed it manually restarted (although she did not) and I checked once again updates. Yet once the update has been demonstrated as being available, I installed and checked the updates immediately, it is still indicated as required and ready to install.
I went to microsoft.com and downloaded the update by hand and installed, same result. I checked directly updates from Microsoft Update on this machine, the update shows still necessary, that I have installed, same result. For this reason, the update is now installed everyday by the windows update scheduler with the same result. So far, the history of Windows Update indicates that this update has been installed successfully 6 times and is pending installation for hours tonight.
No idea what's going on here or how can I fix?
Thank you.
Hi there, try:
Forum specific support by WSUS:
http://social.technet.Microsoft.com/forums/en-us/winserverwsus/threadsTaurArian [MVP] 2005-2011 - Update Services
-
Live Messenger fail "set up side by side" not correct
It seems that MANY people are in this situation, Please HELPI'm connected but for others, even though I'm not logged in I uninstalled and reinstalled but no change. We visited forums and tried everything suggested. I can connect in all accounts except this one and when I say sign said me I'm out at all except the Messenger... I seem to be in a loop and try to disconnect all the ways I don't know how... How can I get connected to and restore my Messenger... GRANDMOTHER OF SEVERE!
Hi JoodocBeck-Turner,
I suggest that you post your question on the Forums of Windows Live for a better answer to this question. This is a dedicated forum for issues related to Windows Live Messenger
http://social.answers.Microsoft.com/forums/en-us/category/windowslive
You can check the link below:
http://support.Microsoft.com/kb/940065
With regard to:
Samhrutha G S - Microsoft technical support.
-
Computer will not start correctly even after rebooting.
- repairs to start but the same problem occurs again the next time the computer is turned on.
OT: Startup Repair work and its working properly and then works the next time its switched on. but more often the computer will start up again and the restart process everything must be done again
Hi David,
Method 1
Step 1: I suggest to start the computer in safe mode and check if the problem persists.Start your computer in safe mode
http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-modeStep 2: If the problem is solved in safe mode, then I suggest you perform the clean boot and remove the program that is causing the problem.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: Follow step 7 clean boot KB929135 article to reset the computer in normal mode.Method 2
I suggest you try the steps from the following link:What to do if Windows does not start correctly
http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-do-if-Windows-wont-start-correctlyMethod 3
I suggest you try the steps from the following links:Windows Vista or Windows 7 unbootable, and the Startup Repair tool does not resolve the problem
http://support.Microsoft.com/kb/934540How to use the Bootrec.exe tool in the Windows recovery environment to troubleshoot and repair startup issues in Windows
http://support.Microsoft.com/kb/927392 - repairs to start but the same problem occurs again the next time the computer is turned on.
Maybe you are looking for
-
Automatic synchronization works only on Firefox Android?
I noticed that my open tabs does not automatically synchronize as it does when I move desktop to my Android device. Example scenario to better explain this: I'm on my desktop Firefox with several tabs open. Can I retrieve my Android (4.2 Jelly Bean)
-
Photo Gallery pop-up windows does not open in firefox, but done in internet explore
During a few days within a website popups will be not open. Photo galleries of IE, connections for banking services over the internet.It seems to be a problem in firefox, as they will open with internet explorer
-
Satellite L40 is dead - will not start
Hello I hope someone can help me. My laptop just died!It's a Toshiba Satellite L40 machine. It exploded suddenly and when I tried to put it back on in the morning nothing! I tried without battery, with battery. I checked originally charge with the mu
-
Pavilion Elite M9340f: Replacement hard drive
Hard disk 750 MB Seagate (Baracuda 7200.11) is upward (lock or blue screen with one his jump). Bought a new Seagate 1 TB (SATA) office drive to replace. Recovery disks, format the new drive to 3/3 and then I get the error code 0 400 100 130000 1002
-
HP Envy: Envy fact HP 17 expandable t
I was wondering if my ho envy 17 "touchscreen phone has been upgraded with the graphics card. My laptop model is the m7-n109dxPlease help me, and if it is not able to update anything in the laptop is extensible