Apps cannot access the images after 9.3.2

Similar Questions

• cannot access the internet after upgrading to firefox 30.0 on windows 7

  After the upgrade to firefox 30.0 on windows 7, cannot access the internet. FF 30.0 works OK under Vista

  Sometimes it's because of your security software thinking that the upgrade may not be legitimate. You can consult this article: problems connecting to websites after Firefox update.

• Help, please! Cannot access the web after connected to the VPN

  Hello

  I'm a newbie on Cisco products.  I configured a Cisco ASA 5505 with VPN firewall.  However, I can't access the web after I connected to the remote IPSec VPN.  I also cannot connect to the bands using the intellectual property.  But I can connect to the internal servers in the office with no problems.

  Here is my setup, can someone help please?  Thank you very much

  ASA Version 8.2 (5)

  !

  host name asa

  xxxxxxxxx.com domain name

  enable the encrypted password xxxxxxxxxxx

  xxxxxxxxxxx encrypted passwd

  names of

  !

  interface Ethernet0/0

  switchport access vlan 2

  !

  interface Ethernet0/1

  !

  interface Ethernet0/2

  !

  interface Ethernet0/3

  !

  interface Ethernet0/4

  !

  interface Ethernet0/5

  !

  interface Ethernet0/6

  !

  interface Ethernet0/7

  !

  interface Vlan1

  nameif inside

  security-level 100

  IP 192.168.1.1 255.255.255.0

  !

  interface Vlan2

  nameif outside

  security-level 0

  IP address dhcp setroute

  !

  passive FTP mode

  area of zone clock - 8 schedule

  clock summer-time recurring PDT 1 Sun Apr 02:00 last Sun Oct 02:00

  DNS lookup field inside

  DNS server-group DefaultDNS

  Server name 107.204.233.222

  name-server 192.168.1.3

  xxxxxxxxx.com domain name

  inside_nat0_outbound list of allowed ip extended access all 192.168.1.96 255.255.255.240

  pager lines 24

  Enable logging

  asdm of logging of information

  Within 1500 MTU

  Outside 1500 MTU

  IP local pool sc-192.168.1.100 - 192.168.1.110 mask 255.255.255.0

  ICMP unreachable rate-limit 1 burst-size 1

  don't allow no asdm history

  ARP timeout 14400

  Global 1 interface (outside)

  NAT (inside) 0-list of access inside_nat0_outbound

  NAT (inside) 1 192.168.1.0 255.255.255.0

  NAT (inside) 1 0.0.0.0 0.0.0.0

  Timeout xlate 03:00

  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00

  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00

  Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute

  timeout tcp-proxy-reassembly 0:01:00

  Floating conn timeout 0:00:00

  dynamic-access-policy-registration DfltAccessPolicy

  the ssh LOCAL console AAA authentication

  Enable http server

  http 192.168.1.0 255.255.255.0 inside

  No snmp server location

  No snmp Server contact

  Server enable SNMP traps snmp authentication linkup, linkdown cold start

  Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac

  Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac

  Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac

  Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac

  Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac

  Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac

  Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac

  Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac

  Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac

  Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac

  life crypto ipsec security association seconds 28800

  Crypto ipsec kilobytes of life - safety 4608000 association

  crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs Group1 set

  Crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5

  outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP

  outside_map interface card crypto outside

  Crypto ca trustpoint _SmartCallHome_ServerCA

  Configure CRL

  crypto ISAKMP allow outside

  crypto ISAKMP policy 10

  preshared authentication

  3des encryption

  sha hash

  Group 2

  life 86400

  Telnet timeout 5

  SSH 192.168.1.0 255.255.255.0 inside

  SSH timeout 5

  Console timeout 0

  interface ID client DHCP-client to the outside

  dhcpd outside auto_config

  !

  dhcpd address 192.168.1.5 - 192.168.1.36 inside

  dhcpd dns 107.204.233.222 inside the 192.168.1.3 interface

  dhcpd allow inside

  !

  a basic threat threat detection

  Statistics-list of access threat detection

  no statistical threat detection tcp-interception

  WebVPN

  internal strategy group xxxxxxxx-sc

  attributes of xxxxxxxx-sc group policy

  value of 107.204.233.222 DNS server 192.168.1.3

  Protocol-tunnel-VPN IPSec

  XXXXXXXXXX.com value by default-field

  xxxxx xxxxxxxxxxx encrypted password username

  Strategy Group-VPN-xxxxxxxx-sc

  remote access to tunnel-group xxxxxxxx-sc type

  attributes global-tunnel-group xxxxxxxx-sc

  address sc-pool pool

  Group Policy - by default-xxxxxxxx-sc

  tunnel-group xxxxxxxx-sc ipsec-attributes

  pre-shared key *.

  !

  class-map inspection_default

  match default-inspection-traffic

  !

  !

  type of policy-card inspect dns preset_dns_map

  parameters

  maximum message length automatic of customer

  message-length maximum 512

  Policy-map global_policy

  class inspection_default

  inspect the preset_dns_map dns

  inspect the ftp

  inspect h323 h225

  inspect the h323 ras

  inspect the rsh

  inspect the rtsp

  inspect esmtp

  inspect sqlnet

  inspect the skinny

  inspect sunrpc

  inspect xdmcp

  inspect the sip

  inspect the netbios

  inspect the tftp

  Review the ip options

  !

  global service-policy global_policy

  context of prompt hostname

  call-home service

  anonymous reporting remote call

  call-home

  contact-email-addr [email protected] / * /

  Profile of CiscoTAC-1

  http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address

  email address of destination [email protected] / * /

  destination-mode http transport

  Subscribe to alert-group diagnosis

  Subscribe to alert-group environment

  Subscribe to alert-group monthly periodic inventory

  monthly periodicals to subscribe to alert-group configuration

  daily periodic subscribe to alert-group telemetry

  Cryptochecksum:5c1c99b09fb26fcc36a8bf7206af8e02

  : end

  Hello

  Try adding the following commands

  permit same-security-traffic intra-interface

  NAT (outside) 1 192.168.1.96 255.255.255.240

  Is there are always problems with VPN then I would maybe change VPN pool to anything other than something that comes into conflict with the LAN.

  In this case, these configurations should do the trick

  In order from top to bottom, they would do the following things

  • First remove the pool VPN and VPN configurations
  • Then remove the VPN pool
  • Remake of the VPN Pool with different network
  • Reattach the VPN pool for VPN configurations
  • Configure NAT0 to the new cluster of VPN
  • Remove the old line of the ACL of the configuration of NAT0

  attributes global-tunnel-group xxxxxxxx-sc

  no address-sc-swimming pool

  no ip local pool sc 192.168.1.100 - 192.168.1.110 mask 255.255.255.0

  IP local pool sc-192.168.2.10 - 192.168.2.254 mask 255.255.255.0

  attributes global-tunnel-group xxxxxxxx-sc

  address sc-pool pool

  inside_nat0_outbound to access ip 192.168.1.0 scope list allow 255.255.255.0 192.168.2.0 255.255.255.0

  no access list inside_nat0_outbound extended permits all ip 192.168.1.96 255.255.255.240

  Of course you also have the NAT configuration for VPN pools new Internet traffic

  NAT (outside) 1 192.168.2.0 255.255.255.0

  Please rate if the information has been useful if this resolved the issue as mark responded.

  -Jouni

• Backup complete pc cannot find the image after factory reset

  Don't know what forum this is because it is not quite fit any category.  Happy to have redirected it.

  Had some problems with my laptop, so I created a full backup in Vista Business pc.  Then I reset the phone to factory settings and tried to reinstall the saved image.  The Vista is OEM installed, so used F8.  The system can't find the image even if I select D drive and view the file.

  Thinking it's perhaps something to do with connections etc. that I had put in place a new instance, I created a new complete pc backup and it does not find this to be.

  I bought Acronis and copied the original image (which was also recorded on an external drive) then tried to reinstall on drive C.  He failed.

  Don't know what to do next.  Everything seems to be on the disks.  I read something about the load drivers.  Also something about the use of a virtual server.

  Don't know where to go from here.  It's been nearly three days.

  Nine Hills,

  Where you store your backup Image? On your D drive?

  You have access to a retail Vista installation disc? If Yes, you can run the System Recovery Options that allow you to do a complete PC Restore to outside the Vista desktop environment.

  If not, try the following steps:

  1. Click on Start-> in the field type to start searching the backup status and Configuration, click on enter.
  2. Click on restore files on the left, click Advanced Restore. If you are prompted for an administrator password or a confirmation, type your password or click on continue.
  3. Choose the files from a backup made on a different computer.
  4. Select the location of the backup you want to restore. (Can you locate your Image of restoration here?)
  5. Click Next, and follow the wizard to complete your restoration.

  This resolves who you know?

  Rami
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot access the images on external hard drive.

  I'm trying to access a folder on my external hard drive. The folder contains images and the hard drive is the internal hard drive from my old computer with XP as the BACK. The new computer I try to access the folder on a Vista like the BACK. I can open the file, but when I try to open the images, it says I don't have permission to access the location of the file. I tried to implement the steps described in this thread http://answers.microsoft.com/en-us/windows/forum/windows_7-files/accessing-files-on-external-hard-drive/1bd3550f-10fc-406e-be45-0de794343e53 but it did not work. Help, please.

  Hello

  Referring you BACK Disk Operating System?

  I suggest you to follow the steps and check if it helps.

  Step 1: Give Permission to everyone and check if it helps.

  (a) right click on the folder you want to take control and then click Properties.

  (b) click on the Security tab, click Advanced, and in the permissions tab, click Add.

  (c) If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  (d) type like everyone else, the in called Windows Enter the name of the object to select it, and then click OK.

  (e) in the new window, give select full control and click OK.

  (f) click OK.

  Step 2: in the permission tab (follow step a and b in step 1 to open the authorization tab), if you have any user refused to try to remove it and make sure that include the permissions that can be inherited from the parent of the object is checked.

  Reference: troubleshoot "access denied" when opening files or folders

  I hope this helps.

• Cannot access the network after you have installed the Windows updates

  original title: Windows update and Acer Aspire M3201

  Hi, I have a problem with my Acer Aspire M3201, which has Windows Vista on it. The system has installed the Windows Update automatically, so I can't access the internet and home network more. So I restored the previous update windows, then I can get into the internet again. A week later the update windows again but this time somehow corrupted previous restoration, I cannot restore and can not enter in the internet. I bought Windows 7 to upgrade my Windows Vista computer. The upgrade went OK game, but it was also installed the updateautomatically, and I cannot yet access the internet web browser of screws, but the command, I can ping any web site as www.cisco.com. Please help me. Thank you.

  If you updated that could trigger it, you can do is to uninstall and avoid installing it by hiding the update in Windows Update.

  Click Start, type: see installed updates
  Press enter on your keyboard
  Look for the update in question, no it click on, then click on uninstall.

  Restart your computer

  Open Windows Update, select the update, right-click and click Hide

  See also: Troubleshoot network Windows 7 http://clkon.us/bJtkA0

• Cannot access the drive after you type the correct password for BitLocker. Access is denied.

  Hi all!

  I really have a problem with my disc drive BitLocker encrypted.

  On my PC at the beginning (from 2009), with OS win7, I encrypted my external WD 500 GB MY BOOK hard drive.

  Unfortunately, old PC died:(et il y a un problème.)

  Now on my new computer with win7 OS or another, I can't access my WD 500 GB MY BOOK external hard drive?

  my first try the solution: I try to unlock the drive with my correct password and everything seems OK, drive is unlocked, but when I try to enter the disk I have the popup alert message: location is not available. J:\ is not available. Access is denied.

  After that, I try another option.

  try my second solution: In Control Panel > system and security > BitLocker Drive Encriptación I chose my encrypted disk and try to decrypt the drive. After maybe 7 hours and 99 percent, I got a pop-up message with the error. I don't remember now exactly how was the message.

  Now, when I log on windows, on another device (laptop) when I attach my WD 500 GB MY BOOKoutside, drive in my computer , I have the following status: my external WD MY BOOK 500 GBhard drive is unlocked, visible and recognized as a drive J:\, but I can't access it.

  When I try to enter again the drive, I have the popup alert message: location is not available. J:\ is not available. Access is denied.

  Also, I have the correct password and BitLocker recovery key stored correctly the USB onmy.

  Help, please

  Best.
  

  Hello

  Thanks for posting your query in Microsoft Community Forum.

  Try changing the permissions on the drive for access.

  a. go to "Computer".

  b. right-click on drive J and choose Properties.

  c. click the 'Security' tab and see if your current user is displayed in the ' group or user names " list. If not, please click on the Add button, type the name of your current user account in the "enter the names of the objects to select " box, then click 'OK' to add this group.

  d. Select the user from the list, then check the box 'Allow' next of ' Full Control '.

  e. click on the Advanced button, and then click the 'Owner' tab. Then, press the button "Edit" .

  f. Select current user in the list and check the box "replace the owner of subcontainers and objects".

  g. click 'OK' to save the changes and wait for Windows to transfer ownership of all objects on the partition.

  h. click OK to save the changes and exit the Properties window.

  Check if you are able to access the drive.

  You can also check: BitLocker Drive Encryption Step Guide for Windows 7

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

  Thank you.

• BB10 html app cannot load the image

  I have a site on http://touch.srwd21.com (internal domain address) html5

  And I have here the creation within the widget element in the config.xml file

  http://www.w3.org/ns/widgets"
  xmlns:rim="http://www.blackberry.com/ns/widgets"
  version="1.0.0.0" id="srwd21">
    srwd21
    Description for srwd21
    
      read_geolocation
    
    
    
    
    
    http://touch.srwd21.com"/>
  
  

  I have deployed the application Simulator BB10 Alpha and at the launch, see my snapshots:

  https://www.EverNote.com/shard/S140/sh/f522c819-A3CB-4016-9f69-129d4aaec0c8/7f14e2fab85ca8da3086fc59...

  The css is loaded and search bar is in the expected location, but just the image file are not allowed access. Please help this is wrong, and what needs to be defined.

  Thank you!

  Ahh, I found that this site access to external data and tries to shoot in. You will get errors if you don't have white list applications xsite to espn.com etc etc.

• Cannot save the image after you change

  original title: picture change

  I try to rotate a photo and save it, but a message will apear and says cannot save changes because there is a problem with the file

  original title: picture change

  I try to rotate a photo and save it, but a message will apear and says cannot save changes because there is a problem with the file

  ===============================================
  I don't know if the following links answer your question, but
  they may be worth a visit:

  Good luck and * proceed at your own risk *.

  FWIW... There is a very long discussion (several pages) to the
  following link:

  Cannot change the imported iPhone 4S photo
  https://discussions.Apple.com/thread/3444951?start=0&TSTART=0

  More Discussion

  iPhone 4S image properties is not compartible with Windows?
  Editing can be done on the computer due to the error
  "Windows Photo Viewer cannot save changes to this picture.
  because there is a problem with the properties of the image file".
  Any help?
  https://discussions.Apple.com/message/17291884#17291884

  More Discussion:

  We cannot turn a few photos in Windows 7 (but can turn others)
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/cant-rotate-some-photos-in-Windows-7-but-can/3a809845-9144-4BB1-9bb3-ab4f5b856524

  A simple solution is to open the photos in paint or most other
  digital image editor and modify it.

  Some people have reported success using the following free download
  to remove the metadata.

  Property restrictions stripper iphone 4S (JPEG & PNG Stripper)
  http://www.SteelBytes.com/?mid=30&cmd=download&PID=15

  Here's a way to turn...

  Easily turn locked iPhone 4 and 4 s Photos in Windows 7 with
  the rotator Lossless JPEG free
  http://www.daleisphere.com/easily-rotate-locked-iPhone-4-and-4S-photos-in-Windows-7-with-the-free-JPEG-lossless-Rotator/

  Free download JPEG Lossless rotating
  http://annystudio.com/software/jpeglosslessrotator/

• Cannot access the images of membership

  Hello

  I have the 10 images/month subscription, I used all the last 10 months and now runs a new month but Stock says I have 0 images available for download...

  How can I access the content for that I'm paying?

  Best,

  As a gesture of goodwill, I added 2 image credits to your account.

  For the purchase of additional images, please see the link: pricing and membershipAdobe Stock plan. Adobe Stock

• Cannot access the WAP54G after firmware upgrade

  I have updated the firmware of my WAP54G v.2; We just started to use the AP again and when I checked, I thought I would update. I was going to 1.2 or 1.4 to the latest firmware using this link http://homesupport.cisco.com/en-us/wireless/lbc/WAP54G, version 2. I could see the AP before starting my Dlink router. I downloaded the firmware and the upgrade of the access point. She completed successfully, but when I tried it I could reach him is no longer. I checked the router and it shows is no longer there and I can't access it via the installer.

  How you try to access the router configuration page? If the access point is connected to your d-link router, make sure that your router's default ip address and AP are in the same range. The IP default WAP54G is 192.168.1.245.

  If the router's default IP address is different, so you will need the AP wired to your computer and assign a static ip address to your computer ie: 192.168.1.10 and then connect to the access point configuration page and settings wireless entry and change the default IP of AP, which is of the order of your d-link router.

• Adobe Lightroom 2015.2.1 - cannot access the images using the import option "browse the computer."

  Hi all

  I just downloaded and installed Lightroom 2015.2.1. When I click "Import", I gives me a few options to choose from, one of them is "browse the computer." Choose this option by opening the folder that I need, there is no images displayed and the folder appears empty with a title "no element not corresponding to your search. This is true for ALL folders on my computer.

  What's weird, is that if I click on "selecting a folder" at the lower right part of the window, the pictures in this folder will BE imported even though when the folder is opened, they are not displayed. However, I want to select specific images and does not import the entire folder.

  What happens and how can I fix?

  I saw another thread with a few days of a person having the same problem, but without a fix.

  "Browse computer" only shows you the folders.

  Select a folder by clicking with the mouse, click the [Select Folder] button, then the import window will show the files in this folder, where you can select/Disable-preset images.

  The window shows "no found photos" If the folder is empty OR the images were previously imported.

• Cannot access the images in Iphoto

  I can't access my Iphoto images, even if I see them on the tile. I already tried all the restoration integrated without luck, so tried the copy in the other place, which she won't let me do no more.

  What else can I try?

  With the amount of information you provided that it is impossible to offer a solution.  We cannot see your computer so we need to know the details of your problem and the configuration, i.e.:

  • What system do you use?
  • What version of iPhoto do you run?
  • What happens when you double-click a thumbnail?
  • What difficulties have tried?
  • where is your library? If it's on an external hard drive how this drive is formatted?
  • did you apply the updates or upgrades just before the problem occurs?
  • you run a library "managed" or "referenced"?

  

  • What type of Mac?
  • How much free space on your startup disk?

  

• 42RL833 - latest Firmware installed and cannot access the YouTube app

  I have 42RL833 Toshiba which is updated to the latest firmware, however I still cannot access the application on my YouTube. I get an error saying that Youtube XL is no longer supported.

  What can I do to fix this?

  > I get an error saying that Youtube XL is no longer supported.

  Google has stopped the YouTube XL service and, therefore, this service isn't available anymore.
  http://www.Toshiba.EU/innovation/generic/YouTube-XL/

  You can read details here:
  https://support.Google.com/YouTube/answer/3123170?hl=en

  It also seems that YouTube XL has been replaced by YouTube Leanback Lite:
  http://www.YouTube.com/leanbacklite
  See also:
  https://support.Google.com/YouTube/answer/3153576#

  There is also a note that if you can connect your computer to your TV, you can continue to use the YouTube TV-optimized experience by visiting youtube.com/tv.

• Receives the following message after opening a downloaded game: 'Windows cannot access the specified device, path or file. You can not have the appropriate permissions to access the item.

  Hello!
  So I'm at the end of my rope with this one... it lasts for months, and I keep revisitng every two weeks to try and fix that and every time to be completely frustrated.  I found this forum tonight, so here goes...

  We downloaded a few games on the HP Games Web site.  We download them and everything works fine.  Then, we will open the games and this pop up error message:
  "Windows cannot access the specified device, path or file.  You can not have the appropriate permissions to access the item.

  These games used to run fine, and I have no idea why they now have problems.  We have a Vista operating system, 1 account who is the administrator, the Parental control is disabled (or if we believe).

  If anyone can please help it would be much appreciated!  We have a monthly membership to this site of game and continue to accumulate credits, but may not use it.  It makes us crazy!

  Thank you in advance!

  Hello Heathie,

  Thank you for posting.  It seems that the program is no longer on your computer.  This can happen if the game files are deleted, but the game itself has not been uninstalled correctly.  I recommend you to download the game again to a location on your computer where you can easily find and install it.  This should fix the problem.

  Please let me know if this helps you.
  Zack
  Engineer Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.