Apps don't be loading not after 10 IOS upgrade

During the IOS upgrade message received on not enough space on the phone if he said he would remove WhatsApp, Facebook and Google Maps but would be re - install after. Well, he didn't. WhatsApp and google maps are simply disappear. Clicking on it will say just wait, and then finally stops. In the APP store, it has just the round circle on hold, and clicking on it does nothing. I tried APP deletion says it will erase all the data, but will not erase. Tried to reset all settings and reset the network settings problem. Tried to turn off even airplane mode problem. Hard reset on the phone, same problem. Connected to ITunes and tried to delete APP nothing changes.

Made sure to clear enough space on the phone, so it would not be the problem to try to re - install.

Oddly enough, I was able to re - install FaceBook not on APP store because it always shows the circle of waiting but it installed from SETTINGS-> FaceBook. It works, but via APP Store, it shows not installed as in STANDBY mode

Could do a complete reset of the phone, but that could clear up the APP Store list of applications in Standby Mode?

Question is how do I remove APPS the phone is off and clear out of the APP store, so I can re - install.

As stated earlier tries to remove the application from the custom of phone works as it is in limbo Land.

Hello steebie,

Thank you for reaching out to the Community Support from Apple. I know how it is important to keep your phone and applications up-to-date and I would like to help him find your applications running for you.

You're off to a great start with the troubleshooting, you have already done, and restore your phone might have been a final step before we get to this point I would recommend go to settings > general > storage & use iCloud > storage management. Find apps that you are causing problems and press them, and then click Remove app. So go ahead and sign out of the App Store completely and then sign back in after a reboot.

You can log out by going to settings > iTunes and App Store. Type on your Apple ID and select "logout". Then just restart and reconnect. Then go back into the App Store and download the apps again.

If the behaviour continues or if you encounter difficulties, the entire community is here to help.
Best regards

Tags: iPhone

Similar Questions

  • Windows 8 apps don't be loading not, stuck on the loading screen

    As the title says, I have installed Windows 8 and put to update some drivers and anti-virus. When I go to start and click on any application it will not load. It gets to the loading screen and doesn't change from there.

    Help is much appreciated, thank you.

    Hello

    1. it is just the modern UI apps that did not load.
    2. yes I tried to disable the drivers and antivirus (Kaspersky Internet Security 2013) however apps still has not loaded correctly.
    I tried restarting the PC and reinstall the anti-virus etc, however no difference.
    I actually ended up performing a new installation which sets out all the questions. My PC is now very fast and standard. It seems that the upgrade process has not worked for me. I hope that this thread can help someone else with the same issue.
    Also my Cyborg v7 keyboard does not work with Windows 8, I had to use my old keyboard Logitech G11 place.
    Except that everything seems to work very well and I'm finally take full advantage of the Windows 8 experience.
    Thanks a lot for your help.
  • Adobe Creative cloud apps don't be loading not or displays "download error".

    Hello I used my perfectly good creative cloud for a while now, and all of a sudden it stopped loading or downloading my apps. I tried everything adobe said would fix my error on their site and up to now, nothing has helped me. I'm getting very frustrated because I need my adobe audition to complete a project and I am short on time. Please if someone can help fix me this please respond. I am currently using a windows 10 machine that could already run adobe cc apps perfectly fine.

    Have you checked 10 Windows and Adobe Creative Cloud ?

    You can also contact the support for this: https://helpx.adobe.com/contact.html

    Concerning

    Stéphane

  • Several pages not to load not after update - webkit error. Yosemite.

    Do you have a update system today (March, 22.). Several pages in Safari are suddenly empty now and don't be loading not "unexpected." Report of tips for "com.apple.WebKit.WebContent."

    So what I tried so far:

    -Disable Plugins

    -deleted all the cache, history, web content, cookies etc.

    -reinstalled safari 9.1 manually from the download on the Internet.

    -reinstalled the system (Yosemite-> I can't move to El Capitan due to software that does not support the OS 10.11 yet)

    System Specs:

    MacBook Pro 15 "retina end of 2013

    10.10.5 Yosemite

    Searched the web - no luck. Maybe someone here can help me.

    Thank you very much in advance.

    Here is a screenshot of the error message in German, in English, he would say something like "web content Safari was forced to quit unexpectedly ... click on the report..." "and on the bottom line 'a problem occurred several times with ... '. »

    Please launch the Console application in one of the following ways:

    ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

    ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

    ☞ Open LaunchPad and start typing the name.

    Step 1

    For this step, the title of the Console window should be all Messages. If it isn't, select

    SYSTEM LOG QUERIES ▹ all Messages

    in the list of logs on the left. If you don't see this list, select

    List of newspapers seen ▹ display

    in the menu at the top of the screen bar.

    In the upper right corner of the Console window, there is a search box to filter. Enter the name of the application crashed or process. For example, if Safari has crashed, you would enter "Safari" (without the quotes).

    Each message in the journal begins with the date and time when it was entered. Select the messages since the time of the last fall, as appropriate. Copy to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

    The journal contains a large amount of information, almost everything that is not relevant to solve a particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

    Please don't dump blindly thousands of lines in the journal in this discussion.

    Please do not post screenshots of log messages - text poster.

    Some private information, such as your name, may appear in the log. Anonymize before posting.

    Step 2

    In the Console window, clear the search box, and then select

    DIAGNOSIS AND diagnostic USE information reports ▹ user

    (not diagnose them and use Messages) in the list of logs on the left. There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points downwards. You will see a list of reports of incidents. The name of each report begins with the name of the process and ends with ".crash". Select the most recent report on the process in question. The content of the report is displayed at right. Allows you to copy and paste to validate all of the content, text, not a screenshot.

    I know that the report is long, perhaps several hundred lines. Please report all this anyway. If the report is only a few lines, make sure that you have disabled the search box.

    If you don't see any report, but you know, he had an accident, you have chosen diagnostic and using the list of Log Messages. INFORMATION on the USE of DIAGNOSTIC AND choose instead.

    In the interest of privacy, I suggest that, before posting, you change the UUID ' anonymous, ' a long string of letters, numbers and dashes in the header of the report, if it is present (it cannot be). "

    Please do not post other types of diagnostic report - they are very long and rarely useful.

    When you post the journal excerpt or the accident report, you might see an error message on the web page: "you have included content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

    If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

  • Videos online not be loading not after installing Windows updates

    Original title: videos online not be loading not, can someone help please?

    I have uninstalled/reinstalled the latest versions of adobe and java.  Ran virus/malware software and no virus jumped upward. An update of windows can be the source of the problem. I never had problems with my laptop for almost a year now and during a large update, that everything went POO (internet ran VERY VERY SLOWLY). After a system restore that everything was back to normal apart from these disorders with clips/vids of loading.

    Can someone please help
    Allan

    Hi allanway,

    ·         What web browser do you use?

    If you use Internet Explorer, then, I suggest you try the following steps and check if it helps:

    Step 1:

    Run the Microsoft Fixit from following link and if it helps:

    Solve Internet Explorer add-on problems when IE hangs or freezes

    Step 2:

    If step 1 fails, then I suggest you to reset Internet Explorer to default settings and check if that helps:

    How to reset Internet Explorer settings

    For more information:

    Problems playing the videos by using Internet Explorer

    I hope this helps.

  • Apps don't redownloading not after updating iOS 10.

    Hello

    So until I updated to iOS 10 asked me if I would like to uninstall some applications and then they would be uploaded once the update has been completed. It's because I didn't have enough storage. In any case, I pressed 'yes '.

    So update to iOS 10 went a lot, however, apps download just stayed greyed out as if they were downloading, however, they are not. By default, they appear dimmed however once you press on them, he said waiting as if she was about to download.

    I have tried everything - tried to uninstall applications, however, he leaves not you, backup and restore then, plug it into a computer and uninstall the application (once more does not work).

    NOTE: I've updated since an iOS beta 10

    Try again on Wi - Fi and connect to the power supply.

  • Qosmio F60 - 14Q: after recovery to factory settings, don't be loading not windows?

    I have a Qosmio, F60 - 14 Q, yesterday, I got an error "Windows has detected a hard disk problem. I contacted Toshiba support who advised me to run checkdisk which I did and 1 bad cluster was found, but the problem has not disappeared.

    Then they advised me to get back to the factory setting and save before I do, then I made backup and also made a recovery CD. Then I ran the Setup program that went well, but windows has not been loaded and blue screen came.

    It restarted again and request to insert a CD while I inserted the cd of restoration which lead me to the same place that I ran from recovery. The difference being it did not run this time when I tried?

    I think that it does not detect the hard disk, any help would be appreciated.

    > I think that it does not detect the hard disk, any help would be appreciated.
    You can see the details of the HARD drive in the BIOS?
    Verify that access to the BIOS (press F2 during boot) and the details of the HARD drive must be mentioned on the first page.

    If the HARD drive is not... Well then the HARD drive is faulty

  • Safari, itunes and app store won't load/open after macOS Sierra

    Hello...

    After upgrading to Mac OS Sierra I encounter the following problems:

    -Safari will load all the pages.

    -iTunes does not open (IE top menu appears but nothing else).

    -L'App store will not display/connection (IE no message just a white screen).

    any help also greatly appreciated...

    Try the following steps:

    OS x: "Unable to connect" or "unable to connect to the App Store. An internet connection is required"- Apple Support

    Advanced steps for fixing problems with iTunes Store - Apple Support connection

  • photo editor app now available, but does not, after the last new update

    Hi all

    strange experience that I wanted to stress with you all.

    I just had an update (this morning) to What's New build 3.0.A.0.2

    After you install this hotfix / update, then told me that "editing" is available for download. Build is 5.0.A.0.12

    I'm worried I have not had this app on my phone before - archive system applications reveals this is a new installation, rather than an update of an existing application.

    Also, I did not how to make it work, because there is no app on my home screen shortcuts. The app is not visible in the drop-down list app (when adding new items to my homescreens) either. Nor is the application in the list of main application (accessed with the key 6 points to the center of the permanent Panel shortcut on the home screen).

    I even tried to use a very useful app "quick shortcut maker" and even if I find photo editor in his list of activities, when I test the generated shortcut, unfortunately, I get "the photo editing software has stopped."

    Any ideas?

    I have a few apps disabled, so made photo editing have known all the dependencies?

    EDIT: I tried erase the photo editor and don't restart - no change.

    See you soon,.

    Gary

    Hi MyAliasIsGary

    Photo Editor is a system application only, it can be used when editing photo app to your Album or Photo. For example, if you go to Album > tap a photo > press the bottom icon that looks like a pencil on paper > Photo retouching tap.

  • Creative Cloud Files & fonts don't be loading not - always has spinning charger

    Ive recently had problems with fonts and files in my Office creative cloud App when I have access to it, I am presented with a cone of loading (screenshot below) and does not load the files typekit or cc. This charger does not disappear, even after hours of "loading". I am unable to use the fonts in TK within my apps, so it seems that this could be just a mistake of loading of all kinds? I tried to charge it, synchronize and rebooting with no luck. Any help or advice on this subject would be greatly appreciated! TIA!


    Screen Shot 2015-10-07 at 12.27.33 PM.png

    Hi kylestalla,

    I'm sorry that you trouble with that. It seems that the creative cloud desktop application is unable to write to one of the files on your machine, and so you're stuck in a spinner.

    Perform the following steps to resolve the spinner:

    1 leave the desktop application Cloud Creative

    2. in the menu go to the Finder, select go to folder

    3. paste this path, and click OK:

    ~/Library/preferences/

    4. in the window that opens, you should see a list of files, including com.adobe.accmac.plist

    5. click on com.adobe.accmac.plist and rename it to com.adobe.accmac.plist.old. You will be asked to confirm that you want to change the .old extension.

    6. start the creative Cloud desktop application again.

    I hope that this solves the problem. Let me know if you need anything that anyone else.

    See you soon,.

    Benjamin

  • G mail with animated graphics emails don't be loading not in Firefox. When I open Internet Explorer, and access my mail G images to load, the issue is with Firefox. Are there problems of setting I need to change?

    I received an e-mail with graphics animated through my G mail, but the images and the text was not displayed when I went through Firefox. When I went into Internet Explorer and open the same Gmail, images don't load. There is something in Firefox, this prevents the display, but can't find it in the settings.

    Upgrade your Firefox 9 browser and check

  • Newly created profiles don't be loading not/are not created properly

    Windows Server 2008 R2 I have an administrator account that works.

    I wanted to start earning several accounts for others to use, but met with questions.

    Any profile that I create (standard or admin) cannot connect. I get the "Profile Service could not load... blah blah."

    A little digging revealed that the guest account also has the same problem, and that it creates no new profile I create received a profile under C:/Users folder.

    "C:/users/administrator" and "C:/users/Public" exist, however no records exist for all new profiles I create, or for the guest account (I'm not entirely sure a guest account gets a property.) I've never really played with guest account before).

    Windows always recognizes the profile, I created. Enter user accounts shows that there are three profiles (Admin, guest and that I did). Can I change the password and others on new accounts.

    Also, inside the register, I noticed that there is the file '$-1-5-... '. "Admin and some other networking and other things, but a single folder for profiles; the administrator. Nothing for the new account I created. I didn't take these files before, which means that I didn't manually delete the registry files/folders for the user accounts.

    I'm sure this is the folder of registry administrator account because the data file "ProfileImagePath" says "C:\Users\Administrator.

    I think it's all under "HKey_Local_Machine/Software/Microsoft/Windows_NT/CurrentVersion/Profile List.

    So what's happening? I don't want to reinstall or do a system restore.

    I've always had this problem since the first profile, I created. However, by the time (months ago) I didn't know it's this deep. I've linked it to accounts via Remote Desktop and thought it was a problem with some settings of remote desktop.

    Sooomewhere I read that Google Updater and chromium could cause Corruptions of profile. There is no Chrome. However I do not think that there is corruption. It's just too bad about the failure of the creation of user folders > _ >

    Hello

    The question you have posted is adapted in the Microsoft technet forums. I suggest you post in the Microsoft technet forums to improve the assistance.

    http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

    Hope that helps.

  • 9810 blackBerry smartphones don't have load not

    Hello, I had trouble loading my 9810. When I plug my phone into the charger bolt does not show up on top of the battery, instead I get the usb on the battery symbol. I have to keep unplugging and then plugging my phone and after several tries the bolt comes and it starts to charge my phone. Any help would be appreciated. Thank you.

    Looks like the USB port is damaged, and that's why it does not load. It is possible, it can be temporarily fixed by bending down to where it is supposed to be, but it is definitely damaged. It may be a good idea to talk to your carrier and see if they will cover under warranty.

  • My libraries don't be loading not creative cloud so I can't add my signature to my work... Please help!

    My creative cloud does not load the library... could someone tell me how to do?

    Hi Sarah,.

    Please try this sequence of events and see if it helps with your problem of library:

    Close all Adobe programs

    Open your task manager

    Close cclibrary.exe

    Restart your app

    Guinot

  • Spinning to Lightroom - don't be loading not found

    Hi everyone - I hope someone here can help me with a question.

    Recently when using LR after going through about 100 or so this preview previews stop loading - the image appears, but underneath, it's say "Loading" and the icon loading turns constantly. I can continue to edit it, but the images never completely loading or appear at higher resolution.

    If I try to export an image, sometimes she will make something similar - this time in the form of a spinning color wheel Mac without end.

    Also, when you save the catalogue, he opitimizes and backup itself, but at the end of the process, the same thing happens on occasion.

    I have reset the P - RAM computer without result. This is a MacBook Pro, running 10.6.8 and 3.6 of Lightroom.

    I guess I have to uninstall and reinstall. If I do, is there something I need to do beforehand to prepare/protect catalogs?

    I appreciate really all advice on this!

    You don't need to do anything special before de - / re-setup. The catalogue, the presets and preferences are all stored.

    Some people report that returning to 3.5 cured some problems for them. You can find it here:

    http://www.Adobe.com/support/downloads/product.jsp?product=113&platform=Macintosh

    Simply uninstall your 3.6 and install 3.5.

    Let us know if this is helpful to all. If this isn't the case, we will need to look deeper.

    HAL

Maybe you are looking for

  • Updates (optional) must be blocked if the essential addons are not yet compatible

    Example: I depend on Roboform to maintain several hundred secure passwords unique and credentials of the user. Updates to firefox often break the addon. I should be able to say thank you to any updates until the addons have caught up. At the present

  • Skype on startup, then crashes

    I'm frustrated and have no idea why Skype has randomly stopped working. Everything was going well until all of a sudden the program started to panic. Then when I opened it, it is literally stopped responding. I tried to restart and it still doesn't w

  • change the IP address of the ACS

    Hello guys,. I will be soon changed the IP address of my ACS server because I will move it to a new VIRTUAL LAN. the ACS is also integrated with Microsoft Active Directory users for authentication to the wireless lan users. My main concern is that if

  • X 1 drivers Bluetooth

    Hi all When I try to connect my Xperia Z to Lenovo X 1, using Bluetooth, I have 9 failures in 10. After the Bluetooth version 6.5.1.380 software update (http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS029104), I can see 5 devices with n

  • The header length too Large - it's a lot.

    This is absolutely not expected!Length of the too big header appeared more than ever! Not only in my browser. Many people are unable to install Flash Player because the page is broken.Please return page hardcoded without any server based on Java. Or