Apps showing as pending

Show is annoying all my apps that can be downloaded, including updating Windows 8.1 show as pending in the Windows store... There seems to be some ppl who have had a similar problem... Anyone know of a good fix?

If you use IE you can check if the temp folder it uses is c:\temp... I had a virtual disk drive configuration and set it as my temp folder and when I updated to Win8.1 it wouldn't download anything until I have reset the c:\ drive.

Good luck

Tags: Windows

Similar Questions

  • Apps shows do not in the settings

    I have an app that showed in the Middle until the last update of IOS.  Now, he is not there; This is why I can't receive notifications.  I have loaded the same app on my iPhone (IOS even) and it shows in the settings and I receive notifications.   How can I get the app in the iPad settings?  The app shows on the iPad itself, and I am able to access.

    Try a reboot

    Restart your iPhone, iPad or iPod touch - Apple Support

    If this help not - consider to remove the app - restart the iPad and redownloading then the app

  • my lack of app shows

    I deleted my App shows how can I reinstall

    Hello

    It is not possible to remove the app shows IOS, although you may have moved (perhaps in a folder).

    To find the application: when viewing on your iPhone Home screen, slide to the bottom of the center of the screen to open research. Then type 'look' in the box search at the top of the screen.

  • IOS app showing "disconnected" after update to IOS 9.3.2

    Well, it seems that I can access is no longer my actions on my iPhone after updating to IOS 9.3.2,and the app shows my NAS as 'Online', but the actions all show "disconnected." If I'm on WIFI it connects fine and shows "connected (LAN)" cell data are enabled for the application and the NAS server is online, just won't access actions while on cell phone. I guess this is a new problem and we have to wait for an update of the app? Sucks that I have to be on WIFI to access my actions to my phone. Desktop application works very well. Someone at - he found a work around for this?

    I was finally able to fix it by going into the tab 'Cloud' on the NAS by clicking on the button "Exit" to cancel my account, signing of the computer desktop and the IOS app, then go to http://readycloud.netgear.com/client/index.html#page=discoverdevices to register a new account with a different email address, even used the same password. Then come back to the NAS to turn on and connect to the cloud and finally sign with the new account on the IOS app. It worked and I can now access all my actions on IOS other networks. Don't forget to turn off the wifi on your phone while doing this, he has to connect through the network of cells and no premises. I guess the old account is deleted when I removed it, otherwise it is now sleep.

  • My HP C6150 all-in-One will not print. The printer icon appears, but it shows 0 pending work.

    I have just upgraded to Windows 7.  I installed the HP update software/driver for my HP C6150 all-in-One.  I can scan, but I cannot print.  I can print a test page from the HP solution Center under the Toolbox settings/printers; However, it is not a full test page.  I was also able to print an Extended Self Test diagnostic of the HP solution Center under the settings/printer Toolbox.  When I try to print from anywhere else the printer icon appears, but it shows 0 pending work.  Nothing happens, and the icon of the printer ends by goes.  I've uninstalled and reinstalled the software/driver with no luck.  I can't find a patch and update HP says there is no new update.  All diagnostic tests, I'm saying that everything works correctly.  Please help me.

    I was able to remove the printer drivers by using a printer driver removal utility.  The printer driver for Windows Vista and Windows 7 (I've upgraded to Windows 7) were apparently contradictory.  I reinstalled the software/driver and everything is good.  Thank you!

  • ICH habe die testversion von first CC runtergeladen. Bei den cloud creative apps shows der mir "aktuell" und nicht öffnen. ICH kann're Pc find und nicht Öffnen nicht im. Woran liegt das? has been kann ich machen?

    ICH habe die testversion von first CC runtergeladen. Bei den cloud creative apps shows der mir "aktuell" und nicht öffnen. ICH kann're Pc find und nicht Öffnen nicht im. Woran liegt das? has been kann ich machen?

    You MUST have a 64-bit computer and operating system... What is your computer?

    -Programs are supposed TO not view or download if they are not installed on your computer

    MINIMUM for After Effects and Premiere Pro http://helpx.adobe.com/premiere-pro/system-requirements.html

  • Why my CS6 apps show the need for an update?

    For some reason, in my drop down list creative cloud, my Adobe Photoshop CS6 and my Dreamweaver CS6 show that they must be updated.  I went through and got the error "U44M1P7" and found different solutions.  When I arrived at the Solution #2, I went to try to install the updates manually.  Out of curiosity, I made a command-I on the two applications to see what version I already had - and they are the same version as the last update.  So, in simple terms, the creative cloud app shows the need for an update, but according to the 'latest news', the last update is already installed.  Can someone tell me what could be the problem?  Thanks in advance - Scott

    Hi,

    Please, try the following steps:

    Kind regards

    Sheena

  • Connected to CC to download Muse trial and get Adobe Muse is now downloading... Continue to learn page. Cloud creative app shows ripple sphincter and the app or the Installer are nowhere to be seen on my computer. The server is down? That is what it is?

    Connected to CC to download Muse trial and get Adobe Muse is now downloading... Continue to learn page. Cloud creative app shows ripple sphincter and the app or the Installer are nowhere to be seen on my computer. The server is down? That is what it is?

    I had put to the index a number of Adobe servers previously in Little Snitch because of their annoying habit of continually calling home and interrupt my goal. Upgrade to Little Snitch and removed a black list and restarted the Mac and everything of fine.

  • 'Apps' show CC AND CC (2014) - Versions of programs. If / if I uninstall CC-Versions?

    'Apps' show CC AND CC (2014) - Versions of programs. If / if I uninstall CC-Versions? How to uninstall? THX

    See the following announcement for an existing thread in this topic:

    Updated by 2014 CC yesterday; all applications where installed in addtiton for Prev versions. How can I clean?

  • CC App shows error download on the Apps page. Press Retry to try again

    10.8.5 Mac.

    CC App shows error download on the Apps page. Press Retry to try again

    Really frustrating. It worked for 2 days and since then I get this error message. There is no problem of firewall etc.

    Hi ParagonLtd,

    Please try to manually apply updates: http://prodesigntools.com/adobe-cc-updates-direct-links-mac.html.

    Please follow the very important instructions before downloading.

    Kind regards

    Romit Sinha

  • my apps watch status pending the installation

    Hello

    I tried to imstall amazon App it's just 150 app... my internet connection is good... It still shows pending... Why... help out me

    Hello Ganesh,

    Thanks for posting your question on the forum of the Microsoft community.

    I would like to know some information about the problem so that we can help you better.

    The problem is specific to the amazon app installation?

    Thank you for details on the issue.

    This can occur either because of network problems or if the Windows Firewall blocks the app.

    I would suggest trying the following methods and check if it helps.

    Method 1:
    Troubleshooting of connections Internet to run and check. Please follow these steps:

    a. press Windows + W keys, type Troubleshooting in the search box and press ENTER.
    b. click on 'show all' and then click on "Internet connection".
    c. click 'Next' and follow the on-screen instructions.

    Also run convenience store app and check.
    See this link:
    http://download.Microsoft.com/download/F/2/4/F24D0C03-4181-4E5B-A23B-5C3A6B5974E3/apps.diagcab

    If this does not help, use method 2.

    Method 2:
    Allow an application to receive information through the firewall and check the issue.

    By default, most applications are blocked by Windows Firewall in order to make your computer more secure. Please refer to the steps in the section "allow an app to receive information through the firewall" in this article:

    End-to-end Windows Firewall
    http://Windows.Microsoft.com/en-us/Windows-8/Windows-Firewall-from-start-to-finish

    I hope this information helps.

    Please let us know if you need more help.

    Thank you

  • Update App blocked to pending

    I try to install the update of the 'Journey' app, but it has stuck at waiting. The levelling bar is empty with pending written below. On the start screen, the application displays just the icon without text below. He opened, the store Windows opens showing "your applications have been installed.

    Help, please

    Ashwin0

    Thank you for your help.

    However, I ended up trying all the solutions and finally updated my computer.

    He fixed it all.

    I want to give my friend step-by-step instructions to refresh or reset its onboard computer. I would be very happy if you could help me with this

    Ashwin0

  • Composites Show "Status pending" after you restart the server

    Hi team,

    I'll call a composite to composite one another, using the WSDL url. Whenever any rebound server happens to be composites of parent are going to pending status and shows error'SOA infrastructure is not loaded for this composite. Error getting entry flow XML < WSDL url goes here > '

    I had found this article on the web.
    https://blogs.Oracle.com/AIA/entry/aia_11g_best_practices_for_dec
    Followed the steps. Although my problem persists. Any help would be greatly appreciated.

    -Sainaba

    You must reference it the WSDL other composites of MDS instead of use the WSDL url.
    Here are the steps I used to do.
    1. go to the folder "C:\Oracle\Middleware\jdeveloper\integration\seed\apps" (where C:\Oracle\Middleware is the path where you install your jdeveloper in your machine)
    2. create a 'lib', 'lib\wsdl', 'lib\xsd' files in the previous path
    3. get the HelloWorld composite (example) WSDL url. Put it in the browser and save it locally as ".wsdl" (i.e. HelloWorld.wsdl) in the folder "C:\Oracle\Middleware\jdeveloper\integration\seed\apps\lib\wsdl".
    4 copy the xsd (say HelloWorld.xsd), which is used in the project HelloWorld to the composite file and copy to the folder "C:\Oracle\Middleware\jdeveloper\integration\seed\apps\lib\xsd". Make sure you copy all the xsd (s) dependent as well.
    5. open the file previously saved '.wsdl', change the with something like that.
    oramds:/apps/lib/WSDL/HelloWorld.wsdl*.
    6. change the value of the 'schemaLocation' to ' * oramds:/apps/lib/xsd/HelloWorld.xsd* '. "Also, make sure that there is no place where it refers to the URL of the SOA server except to the.
    7. open JDeveloper, create the base of SOA MDS file
    8. navigate to the file composite.xml, where he called for HelloWorld.
    9. double-click on the reference "HelloWorld" and will return the wsdl for the local mds.
    * 10. Go to the source of the composite.xml view and change the location of the binding of the service reference "HelloWorld" BLAH oramds to real composite wsdl URL
    11 deploy the MDS (all files in your lib folder) artifacts at MDS of your server. It is the key step before the composite can be deployed on the server. You can use the ant script or you can use the jdev project to do that (we used the ant script).
    12. now your process can be deployed on the server with any problem. Also, you can repeat as many times as you want and you shouldn't see any problem. (granted, all processes update with this approach to reference the wsdl for reference of mds file)

    * Step 10 is not necessary for everyone. I have maintained a separate of the MDS for different environment version. Thus, each environment has correct endpoint in the MDS. We don't have to use the deployment configuration plan when promoting different environment. If you don't want to do, you need to change the location of the binding in the composite.xml or change as well as the plan of the config.

    HTH
    Hruthayah

    Published by: h_kumari on 27 Sep, 2012 13:43

  • Applications on the iPhone is not projection in app shows

    I recently got my Apple Watch and after setting up, I started to install my apps. However I have noticed that a lot of apps in my iPhone that have shows apps appear in the watch application so I can install them. I tried to uninstall the apps on the iPhone and reinstall, but they still did not show in the application of the watch.

    Any ideas or anyone have this problem as well?

    Hello

    Make sure that you follow the instructions here > use of apps on your Apple Watch - Apple Support

    And make sure your iPhone is updated. Tap Settings > general > software update

  • updates to iOS app show filled in the App Store but not apps actually updates

    There's something strange happening very recently with the app on my iPhone and iPad updates. Two of them are on the latest version of iOS (9.3.2). Apps would show that they are updated in the App Store, but they are actually not updated. This is the second time that this has happened and I am writing this message I try to solve problems. The first time it happened I had to remove the app and reinstall it. I'm going...

    1. I opened the App Store.
    2. Press update of all.
    3. I saw the download of updates and the finish.
    4. Open the button is appeared next to the application in the list of updates.

    The problem:

    1. Applications will not open by typing open the button next to them.
    2. I went to the home screen and the applications in question are darker color.
    3. I typed on these applications and they changed the "Loading"... "which means that they have not actually completed the setting to.
    4. The apps started to download it again.
    5. Applications is is stuck in download.
    6. I turned both devices power off, then turn it back on.
    7. On my iPad: apps started to redownload and completed. Applications are now open.
    8. On my iPhone: applications made "Waiting."... "then"Loading"... "and have not finished downloading.

    I'll post this and continue to wait for applications to download. I don't want to remove them and reinstall because they are multiple applications I would you connect again and synchronizes again that I find annoying. I'll try to update this post after the completed download apps, if they end up actually or if I'll end up resettlement.

    I posted this at 09:00. It is now 16:45, and only one of the applications is completely downloaded. It is not a problem with the internet, because I can stream movies very well. Another application that has been "updated" this morning went dark. I typed it and it has been "Waiting."... "for 10 minutes now.

Maybe you are looking for