AprΦs the dΘmarrage, the text file named Guadeloupe is open. Any ideas on what this is?

Similar Questions

• I can't the .png files to display... any ideas?

  Title: original .png

  I can't the .png files to display... any ideas?

  http://www.Winhelponline.com/articles/202/1/PNG-images-are-not-displayed-on-Web-sites-in-Internet-Explorer.html

  PNG images are not displayed on Web sites in Internet Explorer

  Read the above info.

  http://www.libpng.org/pub/png/pngfaq.html

  PNG frequently asked Questions

  See you soon.

  Mick Murphy - Microsoft partner

• After that I replaced the screen on my iPhone 6, the entire phone does not illuminate. Any ideas on what is wrong?

  I know that you're supposed to turn the phone off when replacing the screen, but I couldn't because the screen was broken and the lcd screen no longer works. I removed the screen and the phone was still get notifications. When I get the new screen on the phone no longer lights. Can what parts of the phone I check which could cause this problem?

  As the iPhone does contain not repairable by the user, and you have opened the phone on your own, we don't know what may be wrong. Now that you have cancelled all support post-warranty, Apple will no serve is no longer of this device. You should try to find a 3rd party repair facility to see if they can help you to make it work.

• T60 will not boot receive the beep code 1-3-4-3 any suggestions on what this might be?

  Hi guys,.

  My T60, does not start all of a sudden. I can't access the BIOS. I received the following beep sequence: 1-3-4-3.

  I looked around and got as a message for phoenix BIOS beep code 'Test 512 K base memory '. Anyone has an explanation, and I should do or change?

  Thanks a lot for your support!

  Antoine

  I don't have one of them, but if it's a mistake of memory, the best way to test is to substitute known good memory. If you have two SODIMM modules installed, remove them and install one at the time and the test.

  Sometimes remove and reset of memory are sufficient to solve the problem.

  If this does not help, a good 'generic' method that I use on all laptops with a no boot situation is to remove all the drives and cards, then see if it will boot to the BIOS, or post at all. I've seen poor readers force a system not to post, so remove everything that is not required will be an easy way to identify the cause. Usually, if it will not always display, you'll have a system board failure.

• Writing data in the text file or excel spreadsheet

  Hello

  I have a silly question to ask questions about the writing of data in a text file or a spreadsheet. I have an example that simulates a sine-swept DAQmx. The output it provides is the (amplitude and phase) frequency response function that is plotted on a graph (see VI) attached. I like to use these data for further analysis by transmitting the data to a text file or a spreadsheet. I've tried a few things, but the thread is broken. I guess I use the sink badly - so I was wondering, can you please advise me on what sink should I use?

  Your help would be very appreciated,

  Thank you very much

  REDA

  The wire is broken, because you cannot connect this type of data to one of these two functions. The data source type is a table 1 d of the clusters, where each cluster contains two tables. The text file write accepts strings, not clusters. Writing on a file action accepts dynamic data, and while you can convert dynamic data tables, there is no built-in mechanism to convert a table 1 d of the clusters of two matrices.

  What you need to do is to convert the data in a format which can be accepted by these functions. Since you want to have a "spreadsheet" file then you should use writing to the spreadsheet file that creates a delimited text file. Since the frequency data would be the same for the plot of the magnitude and phase diagrams, you can have 3 columns: frequency, amplitude, and phase. You can take off the items using Unbundle by name, and then create a table 2D of each element of the cluster. The real question is to know if you want to save the data at each iteration and if you simply add on the file. The attached figure shows write an initial header and then adding just streaming the data.

• Add data at the end of a specific line in the text file

  Hello

  I'm trying to add data at the end of the last 4 lines of the text file attached with the ' table to add.  4 rows (422.5800 entry), I would add the first entry of the 'Array to add' entry, on the 5th line to add the second entry of the 'Add picture' and so on.  How can I do this?

  Any help will be appreciated.

  Sincerely,.

  hiNi.

  After re-reading your post, I think that's what you really want to start adding after the first 4 rows.

• Odd number of columns in the text file

  Hello everyone

  From an Excel (.xls) file, I saved (tabs-delimited text) file and open in Labview. The file has only 2 columns (apparently), but my VI says he has 12! I tried to find any character 'lost' in the file but it's all in the first two columns.

  However, if I open the .xls file, save the text file delimited tab, open this tab delimited text file using excel, hit save and then open in my VI, the VI will tell me that the file has only 2 columns. Strange.

  Enclosed please find my VI (I tried two different methods to load the file and got the same results).

  Thank you

  Dan07

  

  

  Around this line, you will notice a bunch of tabs:

  240.4926373\t507.1851226\t\t\t\t...

  Edit: I would like to clean up the source, but if you're stuck here is a way to clean:

  

• Can all help with VI to get data (HEX) serial number and write in the text file

  Hello I am struggling with this problem for 2 months... They get help from different I thought I solved the problem, but of no use yet I stand on zero

  Problem: I need to get data on USB high speed HEXAGON shaped (coming in hexadecimal and be stored in the text file to the hexadecimal format as each hexadecimal value online different I'll also to attach the file)

  Get us ASCII on series or VISA read but when trying to convert to hex as shown in text file making it slower to deal with code, I know that my VI will have to improve more... I'm waiting for suggestions

  Need urgent help...

  Thanks in advance

  Hi Ali Afzal,.

  I think that the attached example can work for you. If not, then try the solution with sending the data to a parallel running the loop and store it there.

  Mike

• Download the text file of the site domain

  I need to download a text file to a directory of a domain site.  Text file is saved  What to do next?

  On your PC, right-click on the text file, and then click on copy.

  Connect to the domain (if you don't know how, you will need to get instructions from the domain administrator on how to configure your PC to connect to the domain - specific settings that are required there and they differ by area - and you may need to be configured on the domain and given rights).  Once the installation program I would map a drive to the field to make easier access next time.  Navigate the site of field to the directory where you want the file to exist.  Right-click on the directory and click on paste.

  The file will now have been copied in the domain site directory (assuming you have the appropriate permissions on the domain server to add files in this directory - you will need to talk to the domain so that administrator it it gives you an "access denied" or "you do not have sufficient to perform this task" or a similar error message).

  That's all there is to it.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Playback/record to the text files using HTML5 as a basis for the code

  Hi, I'm new and I did some research and I found a variety of solutions that seemed a little more complicated than I want. I would like someone to direct me to something that could teach me how to do two things.

  (1) read the text files (essentially my difficulty is how to interact with the file system of playbook for reading files and how to save text files with output 2).

  It is not necessary to try and catch.

  Thanks in advance!

  Hello ignites,

  The following thread contains an example of manipulation of text files and also contains a link to another thread by Tim Windsor where he describes working with other file types:

  http://supportforums.BlackBerry.com/T5/Web-and-WebWorks-development/ReadFile-and-data-manipulation/m...

  Let me know if you have any questions.

  Erik Oros

  BlackBerry Development Advisor

• When the file is saved in windows 7, save the description with the name of the file by the text file

  I need to save files much but don't have time to write the file name and detailed inform instead. When I want to save the file, windows 7 displays the window requires the file name and type. But I need another box that I can describe the detailed information associated file name. This will generate the text file that detailed information with the name of the file.

  Is there a s/w or windows 7 can do that?

  It is not possible to save a file without a name. You must specify a name for the file. In addition, you can add additional information in the comments of the file area. You can open the section "Comments" by going to the properties of the file and go to the Details tab.

• alignment of the text file column data

  Hi all

  I want to format the output file as shown in need. Suggestions appreciated. I tried with lpad, rpad in the query. Also tried with justify right in the column after A5 format... (A5 size frame right)

  It is part of an important application.

  Please suggest.

  SQL file

  --------

  set verify off
  Set feedback off
  NewPage 0 value
  set pagesize 63
  set linesize 280
  TOPIC ON THE VALUE

  coil c:\test.txt.
  column heading "CTY" A5 format Change_types

  termout off Set

  Select CT of
  tab;

  output in the text file

  CTY
  -----
  N

  Power required:

  CTY
  -----
  N

  (* See space above)
  Oracle 10g
  running sqlplus

  Thank you

  HA!

  Hello

  G2500 wrote:

  Hi all

  I want to format the output file as shown in need. Suggestions appreciated. I tried with lpad, rpad in the query. Also tried with justify right in the column after A5 format... (A5 size frame right)

  It is part of an important application.

  Please suggest.

  SQL file

  --------

  set verify off
  Set feedback off
  NewPage 0 value
  set pagesize 63
  set linesize 280
  TOPIC ON THE VALUE

  coil c:\test.txt.
  column heading "CTY" A5 format Change_types

  termout off Set

  Select CT of
  tab;

  output in the text file

  CTY
  -----
  N

  Power required:

  CTY
  -----
  N

  (* See space above)
  Oracle 10g
  running sqlplus

  Thank you

  HA!

  This sounds like a job for LPAD.  What exactly have you tried?  It is difficult to say what hurts you without knowing what you were doing.

  I don't have a copy of your table, so I'll use the scott.dept table to illustrate:

  SELECT LPAD (dname, 20) department_name

  OF scott.dept

  ;

  Output:

  DEPARTMENT_NAME

  --------------------

  ACCOUNTING

  SEARCH

  SALES

  OPERATIONS

  You want to justify the right title, like this

  DEPARTMENT_NAME

  --------------------

  ACCOUNTING

  SEARCH

  SALES

  OPERATIONS

  ?

  If so, make this SQL * more order

  Department_name RIGHT-JUSTIFIED COLUMN

  before running the query.  COLUMN... JUSTIFICATION applies only to the topic, not the data.

• testimonial widget that reads the text file

  Is there someone who makes a testimonial widget that can read a text file? I am considering this is a block for customer testimonials that can read a file of say 50 different clients we wil cut and paste from various places, so that there is always a fresh review illustrated.

  Themes of Muse has some text widgets: one as a ticker-tape driveand displays a (small) number of citations. But none will allow you to modify a file of text outside the Muse of let's say 50 paragraphs and read on the page, one by one, in order.

  There are a lot of scripts to do exactly what you want, like this: alternating Message text box . JavaScriptSource, and many others, just Google: "alternating rotation script of text message". But are you able to manage scripts and HTML codes in Muse ? Maybe some useful script Wizard can cook a place for you or modify an existing one, provide you a text template file and help hair and be implemented in Muse page.

  Don't let them not to edit your output !

  Ask them to help you with a method to ensure within the Muse:

  1. adds a style and script in the header of page (see Page Properties)

  2 Insert the HTML code on the page (under the object menu)

  3 attach the text file on the site (hyperlink, link to the file)

  So, you can change the text file and download all changes with Muse.

  Hope this helps?

• Insert jpg file psd and update the text file

  

  I want to add jpeg images in the 'photo' of the folder field and also update the details of name, announcements and contact information in the text file.

  It is a dynamic process for 100 students. It should be at the top format only.

  Please help me how to do this using Java Script in Adobe Photoshop CS4 or CS6. How to make this format only.

  Thank you

  No JavaScript code not required, see this...

  PS CS5 - working with Variables | The complete picture with Julieanne Kost. Adobe TV

• Need help: UTL_FILE read and write in the text file

  Hello, I'm on version 11 GR 2 by using the UTL_FILE function to read a text file and then write the lines where it starts with the word "foo" and put an end to my writing in the text file where the line with the word "ZEN". Now I have several lines that begin with 'foo' and 'ZEN' allow a paragraph, and in this paragraph, there is a line that begins with "DE4.2". Therefore,.
  I need to write all of the paragraphs that include the "DE4.2" line in their beginning and end of lines 'foo' and 'ZEN '.
  
  FOR EXAMPLE:
  
  FOO/234E53LLID
  IT'S MY SECOND LINE
  IT'S MY THIRD LINE
  DE4.2 IT OF MY FOURTH LINE
  IT'S MY FIFTH LINE
  ZEN/DING3434343
  
  FOO/234E53LLID
  IT'S MY SECOND LINE
  IT'S MY THIRD LINE
  IT'S MY FIFTH LINE
  ZEN/DING3434343
  
  I'm only interested in writing the first paragraph tha includes line DE4.2 in one of the paragraph of lines not the second ther that does not include the "DE4.2".
  
  Here is my code so far:
  
  CREATE OR REPLACE PROCEDURE my_app2 IS
  Utl_file.file_type INFILE;
  outfile utl_file.file_type;
  buffer VARCHAR2 (30000);
  b_paragraph_started BOOLEAN: = FALSE; -flag to indicate which required paragraph is started
  
  BEGIN
  -Open a file to read
  INFILE: = utl_file.fopen ('TEST_DIR', 'mytst.txt', 'r');
  -Opens a file for writing
  outfile: = utl_file.fopen ('TEST_DIR', "Out.txt", "w");
  
  -Check the file is open
  IF utl_file.is_open (infile)
  THEN
  -lines in the file in loop
  LOOP
  BEGIN
  UTL_FILE.get_line (infile, buffer);
  APPLICATION STARTING POINT-
  Buffer IF LIKE 'foo %' THEN
  b_paragraph_started: = TRUE;
  END IF;
  -SEARCH FOR GRADS APPS
  IF b_paragraph_started AND buffering LIKE '% 4% ' THEN
  UTL_FILE.put_line (outfile, buffer, FALSE);
  END IF;
  -REQUEST FOR ENDPOINT
  Buffer IF LIKE '% ZEN' THEN
  b_paragraph_started: = FALSE;
  END IF;
  UTL_FILE.fflush (outfile);
  
  EXCEPTION
  WHEN no_data_found THEN
  EXIT;
  END;
  END LOOP;
  END IF;
  UTL_FILE.fclose (INFILE);
  UTL_FILE.fclose (outfile);
  EXCEPTION
  WHILE OTHERS THEN
  raise_application_error ("-20099, ' UTL_FILE unknown error");
  END my_app2;
  /
  
  When I run this code I get only one line: DE4.2 it ME LACK THE WHOLE PARAGRAPH
  
  PLEASE ADVISE...

  I agree with reservations of Justin on the length of a "paragraph" and the number of users that are running at the same time, so here is a version without the collections.

  CREATE or replace PROCEDURE my_app2 IS
     infile utl_file.file_type;
     outfile utl_file.file_type;
     buffer VARCHAR2(30000);
     b_paragraph_started BOOLEAN := FALSE; -- flag to indicate that required paragraph is started
     b_toprint BOOLEAN := FALSE;
     l_para_start pls_integer;  -- start of "paragraph"
  BEGIN
     infile := utl_file.fopen('TEST_DIR', 'mytst.txt', 'r');
     outfile := utl_file.fopen('TEST_DIR', 'out.txt', 'w');
     LOOP
        BEGIN
           utl_file.get_line(infile, buffer);
           IF buffer LIKE 'FOO%' THEN
              b_paragraph_started := TRUE;
              l_para_start := UTL_FILE.FGETPOS(infile) - (length(buffer) + 1);
           END IF;
           IF b_paragraph_started and buffer like '%DE4%' THEN
              b_toprint := TRUE;
           END IF;
           If buffer like 'ZEN%' THEN
              IF b_toprint THEN
                 UTL_FILE.FSEEK(infile, l_para_start);
                 utl_file.get_line(infile, buffer);
                 while buffer not like 'ZEN%' loop
                    utl_file.put_line(outfile,buffer, FALSE);
                    utl_file.get_line(infile, buffer);
                 end loop;
                 utl_file.put_line(outfile,buffer, FALSE);
              end if;
              b_paragraph_started := FALSE;
              b_toprint := false;
              utl_file.fflush(outfile);
           end if;
        EXCEPTION
           WHEN no_data_found THEN
              EXIT;
           END;
     END LOOP;
     utl_file.fclose(infile);
     utl_file.fclose(outfile);
  END my_app2;
  

  Test:

  SQL> !cat mytst.txt
  FOO/234E53LLID
  THIS IS MY SECOND LINE
  THIS IS MY THIRD LINE
  DE4.2 THIS IS MY FOURTH LINE
  THIS IS MY FIFTH LINE
  ZEN/DING3434343
  
  FOO/234E53LLID
  THIS IS MY SECOND LINE
  THIS IS MY THIRD LINE
  THIS IS MY FIFTH LINE
  ZEN/DING3434343
  
  FOO/234E53LLID again
  THIS IS MY second SECOND LINE
  THIS IS MY second THIRD LINE
  DE4.2 THIS IS MY second FOURTH LINE
  THIS IS MY second FIFTH LINE
  ZEN/DING3434343 again
  
  SQL> exec my_app2;
  
  PL/SQL procedure successfully completed.
  
  SQL> !cat out.txt
  FOO/234E53LLID
  THIS IS MY SECOND LINE
  THIS IS MY THIRD LINE
  DE4.2 THIS IS MY FOURTH LINE
  THIS IS MY FIFTH LINE
  ZEN/DING3434343
  FOO/234E53LLID again
  THIS IS MY second SECOND LINE
  THIS IS MY second THIRD LINE
  DE4.2 THIS IS MY second FOURTH LINE
  THIS IS MY second FIFTH LINE
  ZEN/DING3434343 again
  

  You may need to change the length (buffer) + 1 depending on your platform and if you want a blank line s NLE out paragraphs, add another call to put_line after that outside of the loop in the fi l_toprint block.

  John