ARC mouse and wireless keyboard to stopped working after update

On Tuesday, my keyboard Microsoft's ARC mouse and wireless are busy to my desktop HP running Windows 7 Ultimate.  Since then, there has been a number of updates installed and the ARC keyboard and mouse are no longer works.  I got out my old clumsy Laser Keyboard 6000 and plugged in and it does not work this is how I write this.  But enter the Device Manager or the installed Microsoft keyboard application does not show the ARC keyboard or a mouse as even installed.  I plan to do a system restore, but I probably need security updates installed on 4/14.  Ideas?

UPDATE:

Thanks for the suggestions.  I would have thought than to simply unplug it disconnected and reconnected the cause would detect automatic to reinstall drivers, as suggested by @cookie7746 - but it was not detecting the keyboard and the mouse at all, even at the start of the system when only the BIOS is running.  Who told me I could have a hardware issue not only a software driver problem.  I followed him there down to a faulty USB Extender.  Not related to the software, but a hardware problem.  When I replaced the USB Extender that the connections for the mouse and keyboard of the CRA is well connected, everything works.

So suggestion for those who encounter it: try restarting and during switching on, press the function keys that you use to enter the BIOS settings screen - it is usually CTRL/A or F10 or something - it will usually tell you in a message is displayed briefly that you start.  If it works, you know that you have a good physical connection and the problem is a Windows driver issue.  If this does not work, the problem is not with Windows - it's a hardware connection problem that can be caused by low batteries or dead in the camera (I had this happen to me) or something with USB connections.  Best suggestion at this point is to start eliminating things (like me) by unplugging it the USB Extender, I had these connected directly to USB ports on the computer.  With this process of elimination, you should be able to narrow down the problem.  Good luck!

Tags: Windows

Similar Questions

  • Why the plugin mouse caused wireless keyboard to stop working on my Acer computer?

    I have an Acer with Windows 7 wireless computer. My wireless mouse is starting to wear and I had a plugin standard mouse to replace it. After the installation of the mouse, my wireless keyboard has stopped working entirely without warning. Could you tell me what went wrong?

    Hi WendyMurphy_904,

    Thanks for asking this question to Microsoft Community!

    I understand that you are facing problems with a wireless computer keyboard. Don't worry; We got some troubleshooting methods in order to get this fixed number.

    He would be grateful if you could answer these questions as well.

    (1) did you of recent changes to the computer before the show?

    (2) what is the brand and model of the keyboard?

    (3) is specific to a particular application question?

    To fix your problem, try the following methods one by one.

    Method 1: Mouse, keypad, touchscreen and keyboard with Windows problems

    http://Windows.Microsoft.com/en-us/Windows/help/Mouse-touchpad-and-keyboard-problems-in-Windows

    Method 2: chess answer problems related to the mouse or wireless keyboard http://support.microsoft.com/kb/838398

    It will be useful. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

    Kind regards!

  • I deleted the driver for the mouse and the mouse and the keyboard has stopped working.

    I had installed an updated driver mouse and mouse keep locking up. The Windows troubleshooting information indicates that I have to erase the disc from the mouse, and then reinstall the new mouse driver. When I deleted the mouse driver, the mouse and the keyboard no longer works.

    The computer is running Windows XP with Service Pack 3.

    The computer is one that I built several years ago.

    I tried the things:

    1. I tried the ALT, left SHIFT + Number Lock which is indicated as mouse keyboard operation who has worked in the past.

    Well it does not either from the keyboard is dead.

    2. I tried PS2 Mouse and a keyboard.

    3. I tried a keyboard and a USB mouse. The system shows new hardware found and he wonder then click NEXT to load the driver. No mouse, no keyboard, so no click.

    4. I can't get into the bios, because I can't hit keys to vector in the bios during startup.

    5. I tried to load the Windows XP disk, but the startup routine ask me to hit any key to boot from the CD.

    I have no mouse or keyboard control and therefore cannot respond to any action required by the system.

    Does anyone know a way to solve this problem?

    Solution of my wife - buy a new computer.

    Have a better solution for this problem?

    Thank you

    Bill

    Always try a PS/2 keyboard.  Maybe your PC is not able to access the BIOS, because the keyboard is USB.

    What make / model of the keyboard / mouse "kit"?

  • Mouse and wireless keyboard no longer works

    my hp dv6000 laptop came with the mouse and wireless keyboard, and I use them for 2 years with no problems. Today, while typing, the keyboard is not responding, as well as the mouse. the red light on bottom of mouse is on. I tried pressing and holding the Connect button on the receiver; no lights are lit on the receiver. I have replaced the batteries in the keyboard and the mouse. no action has resolved the problem. I restarted my laptop and that didn't help.  I would try to download the driver for the mouse and the wireless keyboard, but I don't know what is the driver. can someone help me. Thank you

    MY KEYBOARD WOULD ' T CONNECT AFTER AN UPDATE OF THE SYSTEM. IT WAS DUE TO A ZONE ALARM IN MY SECURITY SOFTWARE THAT PREVENTED CONNECTIONS UNAUTHORIZED WIRELESS. CHECK THIS BOX IF YOU HAVE ALREADY DONE A SYSTEM RESTORE AND BATTERIES AND SWITCHING USB PORTS AND UPDATE DRIVERS AND UNLOAD THE CAPASITORS AND OTHER GOOD LUCK!

  • Pavilion 550-122nd: mouse and wireless keyboard do not work before Windows starts (10)

    The wireless keyboard and mouse (that came with the computer) do not work until Windows is started.

    I want to make a (ghost) image of my hard drive using the boot CD Norton ghost 15.0 (but it also applies to other bootable devices).

    When the CD boots and the program starts I have to click a button (OK / accept) to continue. At this point the wireless keyboard and mouse are not active jet. This is why I can't continue.

    Use a USB keyboard gives the same result (also not active at this point).

    Is there a solution / work around for this?

    Thank you.

    On the pilots seems plausible. Especially because on my laptop (older) with Windows 10 CD bootable (like Norton Ghost) don't Duke keyboard and mouse.

    I'll have a look at the new version of the BIOS and start looking for new tools that will accept my keyboard (and mouse).

    Thank you.

  • \Microsoft 700 v2 wireless mouse and the keyboard does not not after upgrade

    installed windows 8 after install to customize exactly the point of putting up wireless mouse and keyboard no longer works has had to use keyboard.to and wired mouse usb finish install. Still does not work after restarting.

    Hello

    I'm sorry to know that the keyboard and Microsoft mouse do not work on the Windows 8 operating system. But we can fix that later article, which gives a few steps on how to solve the problem of mouse and wireless keyboard.

    Please click on the following link and follow the steps. http://support.microsoft.com/kb/838398. This article applies only to the hardware devices that are mentioned in the properties. Please make sure that your keyboard and wireless mouse is referred to as properties.

    Hope this should solve the problem. If you still have the same issue, just reply to us and we can help you better.

    Thank you

  • Anyone Bitmoji keyboard stop working after updating iOs 10?

    Anyone Bitmoji keyboard stop working after updating iOs 10?

    jerseryjones4 wrote:

    Anyone Bitmoji keyboard stop working after updating iOs 10?

    Someone posted on another thread a tweet from Bitmoji they are currently declining, but working on the issue.

  • iPhone more replaced 6 speaker stopped working after update to iOS 9.3.4.

    iPhone more replaced 6 speaker stopped working after update to iOS 9.3.4.

    New speaker of iFixit. After replacement speaker works perfectly. With FaceTime, the call, music, etc. And IPhone running on iOS 9.3.3. But after the update to IOS 9.3.4 speaker stopped working. Several restarts and total content and deletion of parameter did not help.

    Axiomer wrote:

    New speaker of iFixit.

    It is a problem.

    iPhones are not serviceable by the user.

    You're on your own.  After this service yourself, you finished your warranty (if she was still in effect), and Apple will not help you either.

  • G72-a20EM screen has stopped working after updating the BIOS F.48.

    How is it possible that BIOS update recommended could turn off the LCD screen.

    Currently I see almost anything on the screen, but vga port works. But increasingly,.

    Intel graphics card is not recognized.

    G72-a20EM screen has stopped working after updating the BIOS F.48.

    What can I do to fix that?

    Good news!

    I found the working version, and it is version F.08.

    Supposedly new version have different Active cables, and this is the reason why the screen is dark.

    So, case closed, everything is perfect.

  • As some Menu items: Modules, Help Menu and Pocket Extension does not work after update to 17.0

    As some Menu items: Modules, Help Menu and Pocket Extension does not work after update to 17.0

    This may be caused by the Tab Mix Plus extension

    Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance).

    • Do not click on the reset button on the start safe mode window or make changes.

    You can try to install the latest Dev version of Tab Mix more if you use this extension.

    See the sticky on the forum of Tab Mix Plus:

  • Renaming of mouse and wireless keyboard

    I bought a used A1314 and Magic Mouse apple wireless keyboard to use with a Power Mac G5. Both are discoverable and paired and working very well but when I go into the preferences system and then select keyboard and mouse in the status area that opens both name boxes are empty and it does not show battery levels. I am not able to rename either if I go to Bluetooth and open it. This isn't really a problem because they work very well, it's just I want to name them. Someone at - it arrived through this to know how to fix?

    Thank you

    Open BlueTooth preferences, select the input of the unit, then CTRL - or RIGHT click and select Rename from the context menu.

  • Audio stopped working after update

    I have a T5010 e-machines running Windows 7 Pro, x 64 with 2 GB of RAM.  The audio has stopped working after a few updates.  Don't know which because he has many people who installed at the same time.

    I tried to uninstall the audio driver then reinstall.  I tried the shooters to boredom.

    In Device Manager the drive is recognized, but the question mark yellow and says that the device does not start and he has (code 10).    When I start the computer, I get a message that does not start the Realtek audio.

    Since I have no more options about what to do to solve the problem can anyone here help me get the sound working again.  Thank you.

    Hello

    Refer to the suggestions of Shinmila H said on December 10, 2009 and check if that helps.

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/Windows-7-no-sound-high-definition-audio-device/99f19403-c7f3-462e-9ff8-b36f260be979

    You can also check:

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/ATI-high-definition-audio-device-has-a-driver/cd913a6c-40Cf-43c8-8073-fb865b4020d7

    Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.

  • Helmet of Q10 Blackberry blackBerry 10A stopped working after update 10.3. Help, please

    Dear friends! I bought a new Blackberry Q10 just a return of the week and it was on 10.2 os and worked very well, he made me a 10.3.1.1779 update which was about 1.5 GB and I opted for it. My headphone stopped working after the successful update. Besides that everything works well and good. I tried another helmet, cord to the and also tried to wipe off security and hard reset, but nothing helped. I am very worried and looking for help. Please guide me what should I do? Either it's a hardware problem or software related? PS each time as I use headphones it detects, by pressing the button answer on phone headset also Assistant bb opens but sound is not dating a helmet! What ahould do? My phone does not come in the warranty.

    Try different helmet "well known." If those who still fail in your device (but work well in another device), then the deduction becomes one of the devices, which of course we cannot do something internet remotely. Since you say that you have no warranty, you are then looking for a local store (to you) with a technician that you trust and ask them to go to a good assessment and estimate.

    Good luck!

  • Multifunction HP B110a stops working after update from Hp

    I have the all-in-one HP Photosmart B110a, who stops working after applying "HP updates notification". Impossible to print or access HP Solution Center (nothing works). Only solution is to use the installation CD to completely uninstall the HP software & then reinstall. I always prefer to bring software up-to-date, but never for this B110a.

    Member of the family with the same B110a also had this problem today after inadvertently update, so I fixed as mentioned above.

    A lot of your time. Could someone inform me why this happens & there at - it solution. BTW I stopped (as useful as an ashtray on a motorbike) updates

    Concerning

    Thank you Gemini02, not sure what you mean by "go through the HP software. I can find the IP address in the box at tools of the HP Solution Center/printer normally, but after applying the updates, I am unable to access the HP Center solution so I wouldn't be able to change the settings. In any case, I don't want to apply updates in the future.

    Kind regards

  • Volume and mute keyboard keys stop working

    P7 - 1298c updated to Windows 8 Pro, everything worked but now the volume keys and mute have stop working. I know that there are related software, because if I boot a backup drive, they work again. The most obvious thing I did lately, it's remove the feature optional windows Hyper-V. Is there an obvious way to reactivate the buttons?

    Another recent change, I've had, I think that Adobe Flash player has updated.

    It seems to have solved the problem with the help of an old thread in the http://h30434.www3.hp.com/t5/Notebook-PC-Sound-and-Audio-e-g-Windows-8/Volume-control-keys-on-keyboard-not-working/td-p/773049 area Notebook

    I uninstalled the device IDT under sound, video and game controllers in the Device Manager with option enabled, rebooted and reinstalled driver remove the last available IDT device shown to my system model and win 8 64-bit. Oddly enough, I received a message that the update failed. But the sound and the buttons seem to work fine now.

Maybe you are looking for