Archived discussions reference useful or correct?

Similar Questions

• DVD RW drive properties window: what "use error correction" average / under Rip options when digital is selected?

  I noticed that an option in the Properties window of my Player DVD RW - under "Rip", when "Digital" is selected, there is the possibility to check a box "use error correction. I'm a DJ some of my older CD digital - ripping so I wonder if this option would be a good/bad idea? In terms to ensure the best audio Ripper without glitches or jump?

  Hi Alexander,.

  Activate the drive error correction means Windows Media can read CDs that contain errors if the option enable error correction is turned on. Error correction looking for points on the CD where it is unable to read and will attempt to read them again. It will not lead to inaccurate burns. This means that for the best PMR, it "use error correction" option must be selected.

  Let us know if you have other questions about Windows in the future.

• Resurrect an archived discussion?

  Hi guys,.

  I'm trying to resurrect one of my archived discussions that received no response, but I couldn't post a reply.

  This is a "feature" of the OTN forums.

  I don't see the point to start a new discussion, while the former is still there?

  See you soon

  Any thread that has no activity in the last days 120 will be archived.

  This is the reason why your old thread is archived.

• Do not use the correct decimal value

  I am using a cell to calculate a simple equation, but the value is incorrect, because program seems to use the wrong decimal length to calculate the answer.

  A cell is formatted with 2 decimals with a value of 54.55%. (Formula for this cell is 90000/165000)

  B cell is formatted in a monetary value of $75,000 with 0 decimal.

  Cell C's function cell A = * B cell with currencies with 0 decimal formatting.

  Cell C should multiple 54.55% $75,000, resulting in $40 913 in cell C, but the result is always $40 909. When I manually type =. 5455 * 75000 in another cell, I will get the result of 40913. So I guess the program is multiplied by the actual value of the % and not the number rounded to 2 decimal places. However this change so the value will be correct?

  cklat wrote:

  So I guess the program is multiplied by the actual value of the % and not the number rounded to 2 decimal places. However this change so the value will be correct?

  Use the ROUND function:

  

  SG

• Any way to create a room for discussion with using Hello Messages?

  I was playing around with Messages today for a bit. I want to create a room for group discussion for our studio for specific projects. I guess it's impossible to do a Hello chat room? Anyone know if this is possible? Thank you!

  Hello

  Despite Hello be there since iChat 1 (before there was even video) conversations in group for some reason never did any.

  In theory, it should be possible because it uses the same subroutines and the AIM and Jabber accounts.

  You used to be able to drag several Hello Buddies on the same cat and it would become a group.

  This does not seem possible in the Messages she believes still dragging a buddy from the list of friends in the main Chat window starts a new Cat.

  It is also difficult to add the name of Hello to the Contacts app address card so you can use it.

  

  20:55 Monday; December 21, 2015

   iMac 2.5 Ghz i5 2011 (Mavericks) 10.9
   G4/1GhzDual MDD (Leopard 10.5.8)
   MacBookPro (Snow Leopard 10.6.8) 2 GB
   Mac OS X (10.6.8).
   a few iPhones and an iPad

• Serializing TCP reference use?

  Do I need to serialize the use of my TCP reference?  I.e. I control access (using semaphores) my TCP reference when you use the reference in several process?  What is change of response during the review only read write?

  I realize I can create a queue and processes to manage all my writings over TCP, but that the method does not work in my situation.

  You have no need to serialize access TCP write, as long as you don't care about the order in which messages are sent. You won't get pieces of two different writings interlaced with each other. However, as Crossrulz said, you will have a problem with TCP read if you need to match messages with messages received.

  If you do not use an architecture of response control, it would be reasonable to put written TCP where necessary, but all TCP reads in a single loop, and every time that an update comes through, send it to all stakeholders of the code by a registrant or a functional global variable. The only problem with this is that is dying of the TCP connection, you must reconnect, then you will need a way to update the TCP refnum everywhere.

• The product key is not valid for this installation. Please use the correct installation cd to reinstall Windows. Error code 0 x 800040509

  Oh I'm so angry.  I just went through the whole process of formatting a hard drive and reinstall XP Pro.  It worked just great, but she needed ALL the updates since something like 2002.  So, I went through the whole process which took ALL DAY yesterday... excluding the svc pak updates because the error above already happened once.  I assumed it was because all the other updates were missing, where my decision to make all others updated first.  Now I'm here, after every single update, the computer was working FINE until I installed 2 Pk Svc.  Now I'm just at the beginning.  Please tell me there is a way to remove it without having to reformat and spend another day fixing this bloody nightmare.  I mean really... the program should not be designed to not install if it is the wrong program to start?  What outrageous.

  Please go to http://www.microsoft.com/genuine/ and click on the button to validate Windows, and then restart your computer.

  If you were not able to validate, follow these steps:

  1. Download this diagnostic tool, save it to your desktop: http://go.microsoft.com/fwlink/?linkid=56062

  -Online Windows XP: double-click the executable file to run the tool.

  -Online Vista & Win7: right-click on the executable and select run as administrator to run the tool.

  2. after running the tool, click the Windows tab as appropriate and then click on copy (to the Clipboard).

  NB: You can open a new file in Notepad, paste the contents of the Clipboard in it & keep for future reference.

  3 start a new post in the next Microsoft Genuine Advantage forum and paste the results of the WGA diagnostic data in a detailed post: http://social.microsoft.com/Forums/en-US/genuinewindowsxp/threads

  4 Troubleshooting specialist will analyze the data and recommend an appropriate solution.

  ===========================

  After a clean install, you will have the equivalent of a "new computer" in order to take care of everything on the next page before connecting the machine to the internet or a network and before using a USB key that is not brand new, or has not been freshly formattedotherwise:

  4 steps to help protect your new computer before going online
       http://www.Microsoft.com/security/pypc.aspx

  Other useful references include:

  HOW to get a computer that is running Windows XP Gold (no Service Pack) fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.windowsupdate/MSG/3f5afa8ed33e121c

  HOW TO get a computer that is running Windows XP SP1 (a) or SP2 fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.WindowsXP.General/MSG/a066ae41add7dd2b

  Tip: After getting the computer fully patched, download/install KB971029 manually: http://support.microsoft.com/kb/971029

  NB: No matter what Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free and download/run the removal tool before installing updates, Windows Service Packs, or updates IE and before installing your new anti-virus application (which will require WinXP SP3 must be installed).

  Norton Removal Tool
       FTP://ftp.Symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  McAfee Consumer product removal tool
       http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Reference Dell MD3200i correct editing with IP system and the NIC for faster network speeds

  Hi all

  I worked on this project for a while now. I did a lot of research and have contacted Dell several times. I need help.

  I have 2 sets of identical to use for Hyper-V clusters servers. We bought a Dell MD3200i in November, we also bought a Dell 5424 switch and a Cisco SLM2048 switch. These servers have Real Tek 2 network cards for iSCSI Jumbo frames is 9 k

  The Dell MD3200i is two SAN controllers. Dell 5424 is the iSCSI optimized switch and Cisco is a 48 switch ports. iSCSI is on its own network that nothing else is connected to it. (There is an Iomega NAS and a promise Vtrak SAN Tech with all current domain of execution with iSCSI controller)

  Reference Dell MD3200i controller 0 Port 0 192.168.130.101 controller 1 Port 0 192.168.131.101

  Controller controller Port 1 0 192.168.130.102 1 1 192.168.131.102

  Controller controller Port 2 0 192.168.130.103 1 2 192.168.131.103

  Controller controller Port 3 0 192.168.130.103 1-3 192.168.131.104

  Cisco switch has 1 VLAN n ° 1 on it and the 130 subnet inside elements. There are 8 connections to the switch. 4 controller 0 and 1 of each of the servers. It has an IP of 192.168.132.4, but that switch IP does not make difference. Lighted Jumbo frames

  Dell switch has 2 of #1 for various things such as the domain controller, Vtrack, and SIN. Subnet 2 is 131 and has a total of 8 connectors inside. 4 in 1 controller and 1 from each of the servers. Lighted Jumbo frames. The switch IP address is 192.168.132.2

  Groups of servers. Each server node running Windows 2008 R2 SP1 and running hyper-v with virtual server clusters / storage folder on them. 2 Realtek NIC with Jumbo frames made 9 k ProdNode1 and ProdNode2 have 12 Core i7 CPU with 12 GB memory, EXNode1 and ExNode2 have 12 Core i7 CPU with 24 GB of memory.

  ProdNode1 iSCSI-1 192.168.130.110 ProdNode1 iSCSI-2 192.168.131.110

  ProdNode2 iSCSI-1 192.168.130.120 ProdNode2 iSCSI-2 192.168.131.120

  ExNode1 iSCSI-1 192.168.130.130 ExNode1 iSCSI-2 192.168.131.130

  ExNode2 iSCSI-1 192.168.130.140 ExNode2 iSCSI-2 192.168.131.140

  Portal discovery iSCSI on ProdNode1 went to 192.168.130.110 192.168.130.101 and 192.168.131.110 192.168.131.101 each of the other servers Discovery Portal have been pairs like this.

  iSCSI tab click on add 8 MPIO sessions at each of the ports on the MD3200i from Dell, target. For example, I added 1 session of 192.168.130.101 using it. Add Session,--> activate--> Advanced Mutlipath--> Local--> IP 192.168.130.110 initiator and target 192.168.131.101 iSCSI adapter. This is repeated on all servers. 4 connections for each NIC.

  The network is very slow. It revolved around 2 to 4 MB/MIN and it should be much faster. Initially, we had only the Cisco switch with only 1 VLAN and everything connected directly to it. I read somewhere that MPIO has been the problem, so I went through the same configuration but does not verify the MPIO checkbox above. Once this has been done, the network speed went up to 1.5 GB/Min but modular storage Dell was not happy, and virtual servers would fail and the connection is not very stable.

  What wrong with my setup? Can I directly home and fix the servers directly to the PowerVault and will make stable and allow for failover and redundancy NIC? I need to get this stable so I can move with something else.

  Thank you Ron

  You will need to change your system of intellectual property on this:

  rbramble

  EX-Node1 iSCSI-1 192.168.130.130

  EX-Node1 iSCSI-2 192.168.131.130

  EX-Node2 iSCSI-1 192.168.132.140

  EX-Node2 iSCSI-2 192.168.133.140

  Prod-Node1 iSCSI-1 192.168.130.10

  Prod-Node1 iSCSI-2 192.168.131.10

  Prod-Node2 iSCSI-1 192.168.132.20

  Prod-Node2 iSCSI-2 192.168.133.20

  Reference Dell MD3200i

  Controller 0 Port 0 - 192.168.130.101 Jumbo Frames 9K

  Controller 0 Port 1 - 192.168.131.101 Jumbo Frames 9K

  Controller 0 Port 2 - 192.168.132.101 Jumbo Frames 9K

  Controller 0 Port 3 - 192.168.133.101 Jumbo Frames 9K

  Controller 1 Port 0 - 192.168.130.102 Jumbo Frames 9K

  Controller Port 1 1 - 192.168.131.102 Jumbo Frames 9K

  Controller 1 Port 2 - 192.168.132.102 Jumbo Frames 9K

  Controller 1 Port 3 - 192.168.133.102 Jumbo Frames 9K

  Your iSCSI sessions will be:

  For EX-Node1:

  -192.168.130.130 to 192.168.130.101

  -192.168.130.130 to 192.168.130.102

  -192.168.131.130 to 192.168.131.101

  -192.168.131.130 to 192.168.131.102

  For EX-Node2:

  -192.168.132.140 to 192.168.132.101

  -192.168.132.140 to 192.168.132.102

  -192.168.133.140 to 192.168.133.101

  -192.168.133.140 to 192.168.133.102

  For Prod-Node1:

  -192.168.130.10 to 192.168.130.101

  -192.168.130.10 to 192.168.130.102

  -192.168.131.10 to 192.168.131.101

  -192.168.131.10 to 192.168.131.102

  For Prod-Node2:

  -192.168.132.20 to 192.168.132.101

  -192.168.132.20 to 192.168.132.102

  -192.168.133.20 to 192.168.133.101

  -192.168.133.20 to 192.168.133.102

• The directory structure and using the correct syntax when using models of liquids and 'include '.

  Hello

  I have the following on my directory structure question when I want to use models of liquids with 'include '.

  If I place i.g this code on a model liquid 'layout - test.tpl ".

  {% include 'head' %}

  < section >

  {% block content %} {% endblock %}

  < / section >

  {% include %} 'footer'

  The models will appear without understands it. (On my desk works okay, because that the code compiles through "interprets" and will be shown in plain HTML.)

  Directories look like this (within the section of the administration console developer):

  Page layouts

  -Custom

  -includes

  ... header.liquid

  ... footer.liquid

  -models

  ... layout - test.tpl

  Obviously there is something wrong with my code to work in British Colombia.

  The main question is, what is the correct syntax to make it work?

  Thank you

  Kind regards

  Carla

  You can use no mixing to compile BC locally. BC is SAAS - Software as a solution, and you cannot compile it and its data locally. Simple as that really.

  You can use several file extensions to include in British Colombia. A common set of community is Inc. includes, .tpl for models, for example.

  I think the essential lack of your property is your liquid not application of the BC, your use of the syntax is incorrect and you try to develop locally which you will not be able to do.

• Get VIM object by reference using plugin vCloud

  Hello, any suggestions on how to recover a VIM oppose in reference to a host vCloud?  I am looking for resource support provider TDC pools.  Here's what I'm trying that produces a null result:
  

  for each (var in {VclHostManager.getHostList () vcdInstance)}

  vcdInstance.login ();

  for each (var in {vcdInstance.toAdminObject () .toAdminExtensionObject () .getVMWProviderVdcs () pvdc)}

  for each (var rp in {pvdc.getResourcePools ()})
  

  var rpVimObj = vcdInstance.getEntityByReference (VclFinderType.VIM_RESOURCE_POOL, rp.resourcePoolVimObjectRef);
  

  rpVimObj is null

  }

  }

  }

  
  

  I also tried some variations of types of finder as VclVimObjectTypeEnum.RESOURCE_POOL but also using rp.resourcePoolRef as parameters to getEntityByReference.  The vCloud host/plugin version is 1.5, with vCO 5.1.

  Hello

  There is a way! First, you must get the MoRef of the providerVdc to identify the resourcepool in a VC. But beware, in environments with multiple vCenter servers the MoRef is perhaps not unique (see here and here).

  I think this code will fit your needs:

  //A Moref is a VC-Identifier
  var rpMorefs = new Array();
  
  //do this for all vcdHosts
  for each (var vcdInstance in VclHostManager.getHostList()) {
  
       vcdInstance.login();
       //get all Provider-vDCs from vcdHost
       for each ( var providerVdc in vcdInstance.toAdminObject().getProviderVdcs())
       {
          //Prepare query - getProviderVdc by name
          var expression = new VclExpression(VclQueryProviderVdcResourcePoolRelationField.NAME, providerVdc.name, VclExpressionType.EQUALS);
          var filter = new VclFilter(expression);
          var params = new VclQueryParams();
          params.setFilter(filter);
  
          while (resultSet != null)  {
              // retrieve ProviderVdcResourcePoolRelationRecord record
              var records = resultSet.getRecords(new VclQueryResultProviderVdcResourcePoolRelationRecord());
  
              for each (var record in records) {
                  //get all resourcePoolMorefs
                  rpMorefs.push(record.resourcePoolMoref);
              }
              resultSet = resultSet.getNextPage();
              }
       }
  }
  
  var resourcePools = VcPlugin.getAllResourcePools();
  
  //get the vCenter-resourcePoolObject by Moref
  for each (var moref in rpMorefs){
  
      for each (var resourcePool in resourcePools) {
          if ( moref == resourcePool.id) {
              System.log("Resourcepool of the providerVdc: " + resourcePool.name);
          }
      }
  
  }
  

  Another way to retrieve the MoRef is to extract the XML providerVdc (providerVdc.toXml ()).

  See you soon,.

  Thomas

• Useful and Correct icons do not appear (or more) on certain subjects only

  I think that there is a bug somewhere as for example at the top of this thread Re: need help in writing the business rule
  I can read 'this question is answered. «The helpful answers available: 5. correct answers available: 1.»
  But not one of the following answers shows the useful (yellow star) or OK (green star) icon.
  
  Is - it just me or do others experience similar situations?

  I don't think this is a bug (or at least, it is not unexpected).

  The person who asks a question may mark this question an answer without scoring any useful or appropriate response. It's a pretty significant number of people - the mechanics of the marking of the "correct" answer after you marked the question answered is somewhat non-intuitive.

  Justin

• Reference use

  Hello

  I recently created a Plugin data script to analyze a data file with a proprietary format.  The script works great for indexing and loading of our data files.  I'm currently working on another VBS script which is called by one of the function keys (i.e. F2) to reopen one of these data files.  I have read the tiara online help and found that I could use the OpenFile of object use (global) function.  However I don't know how to refer to the global object use.  By the way, I am currently using the Tiara's free evaluation copy.  Help, please.

  Best regards

  Yours.

  Brad

  Please see my email that I will send to you shortly.

  Thank you.

• I tried to install something on the account of other users but my admin password does not work, I logged my account admin to make sure that im using the correct password and it works? any suggestions

  Works of password to log into the admin account

  password does not work to install the software on other accounts

  This will happen when different keyboards are installed. Try to use a password like 123456 is insensitive to the different schemes. CapsLock or NumLock is also a frequent culprit in such cases.

• Customization of reference used in iRecruitment

  Hello

  I'm trying to customize iRecruitment to fit our clients needs. I wan to have more than one recipient when I create an applicant of cross-references to other

  managers of the Organization, I tried to do it, but get an exception error whenever I click on view applicants page.

  Please help me.

  '

  Oracle error -20001: ORA-20001: APP-FND-02901: You do not have access privilege to any operating unit. Please check if your profile option MO: Security Profile includes any operating unit or the profile option MO: Operating Unit is set. has been detected in MO_GLOBAL.INIT.

  The call stack

  -Stack of calls to PL/SQL - object handle number name 3b08d9060 subject line 7...

  Error stack

  ORA-20001: APPFND-02901: you do not have the privilege to access any unit operating. Please check if yo...

  Yours,

  Luziah

  Hi Luziah,

  Please check if the profiles are defined properly so that you have the privilege to access these working unit, check the profiles of boards namely:

  -HR:Security profile

  -MO: Security profile

  -MO: Control unit

  I also remember to remedy such a problem by disabling the cache of responsibility functional administrator.

  HTH!

  Thank you &

  Best regards

• How can I know which page of a document are an external reference using ExtendScript?

  Hello

  I want to know on what page in an external document XRef can be found. Y at - it a simple way to manage this using ExtendScript? The FrameScript equivalent is XRef.Page.PageNumString.

  Thank you in advance.

  Here's the function changed, which now requires an object doc as the second parameter.

  function getPage (obj, doc) {
  
      var frame = 0, cell = 0;
      var objType = "", prop = 0;
  
      while (obj) {
  
          frame = obj;
          objType = obj.constructor.name;
  
          switch (objType) {
              case "SubCol" :
                  obj = obj.ParentTextFrame;
                  break;
              case "Tbl" :
                  obj = obj.FirstRowInTbl.FirstCellInRow;
                  break;
              case "Row" :
                  obj = obj.FirstCellInRow;
                  break;
              case "Cell" :
              case "Pgf" :
              case "AFrame" :
                  obj = obj.InTextFrame;
                  break;
              case "TextLine" :
              case "TextFrame" :
              case "UnanchoredFrame" :
              case "Arc" :
              case "Ellipse" :
              case "Group" :
              case "Inset" :
              case "Line" :
              case "Math" :
              case "Polygon" :
              case "Polyline" :
              case "Rectangle" :
              case "RoundRect" :
                  if (obj.FrameParent.ObjectValid()) {
                      obj = obj.FrameParent;
                  } else {
                      obj = 0;
                  }
                  break;
              case "XRef" :
                  prop = doc.GetTextPropVal (obj.TextRange.beg, Constants.FP_InTextObj);
                  var obj = prop.propVal.obj;
                  break;
              default:
                  // Prevent endless loop if unknown object type is found.
                  obj = 0;
                  break;
          }
      }
      if (frame) {
          return frame.PageFramePage;
      } else {
          return 0;
      }
  }