"ArcSoft Daemon has stopped working" at startup.

Similar Questions

• ArcSoft Daemon has stopped working pops up at startup

  Occurs whenever the computer is turned on this pop-up: "ArcSoft Daemon has stopped working".

  A problem caused the program blocking

  works correctly.  Windows will close

  the program and you warn if a solution

  isn't available. »

  This has happened more than a week.  Please notify.

  Some ArcSoft program runs at Windows startup and it is a failure. If you use the ArcSoft program, uninstall/reinstall. If you do not use the ArcSoft program, leave it uninstalled.

  Manage startup:

  Start Orb > Search box > type: msconfig and when it appears in the results area above, right-click and choose 'run as administrator '.

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue. Then see what is on the Startup tab. You don't need to restart immediately, but next time you do, you will get a dialog box saying that you have used the utility. Usually, it will be blocked by Windows Defender, and you need to allow it to run so that you can then check the box that says in effect, "don't mind to this subject again".

  Important - do not use the System Configuration utility to stop the process. Use Services and stop all services, unless you really, really know what you're doing.

  The free Autoruns program is very useful for managing your Startup - http://www.microsoft.com/technet/sysinternals/default.mspx

  How to perform a clean boot in Windows Vista or Windows 7 - http://support.microsoft.com/kb/929135

  MS - MVP - Elephant Boy computers - don't panic!

• ArcSoft Daemon has stopped working

  For several weeks now I get an error message whenever I start my computer.

  "Arc Soft connect Daemon has stopped working".    'Microsoft is working on a solution and will inform you with a result' (this part is not the exact wording).
  Why this is happening and how can I get rid of this or repair.
  Thank you.

  Hello

  Published by Marilyn here

  "Click on the Start button. In the start search box, type Msconfig. Then click on the Startup tab.
  If you have any input to Arcsoft, then disable and see if that gets rid of the error at startup.
  If you have more than one program of Arcsoft, turn off one at a time to test them to see which comes the error. »

  Fail with it, try to boot minimum troubleshooting to find the offending program.
  929135 - how to solve a problem by performing a clean boot in Vista or Windows 7:
  http://support.Microsoft.com/default.aspx/KB/929135

  When you identify the troublesome program you can (1) search an update for the program that could solve the problem or (2) uninstall the program.

  Don

• Error "ArcSoft Connect Daemon has stopped working. A problem caused the blocking of the program works correctly. » »

  The original title - the following message mean?

  I get the following message from Microsoft Windows every time I turn on my computer: ArcSoft Connect Daemon has stopped working.  A problem caused the blocking of the program works correctly.  Windows will close the program and notify you if a solution is available.      'Close program' is in a box for me to enter.  What does that mean?  What I'll do.  I get this message for about a week now.

  Hello

  Read the solution proposed by Don Varnau at this link

  http://answers.Microsoft.com/en-us/IE/Forum/IE8-windows_other/ArcSoft-connect-daemon-error-message/c4a5511e-65f9-4B9C-9a43-d9f631c32b73

  Hello

  Quick and dirty solution...
  Start > run > (type) msconfig > Startup tab > uncheck the ArcSoft program > restart.

  Plan b... Watch the programs at http://www.arcsoft.com/en-us/index.asp

  Check Add or remove programs for any of these programs and uninstall the program or turn off
  automatic updates or to automatically connect or what similar feature you find.

  Hope this helps,
  Don
  

  __________________________________

  See you soon.

• ArcSoft Connect Daemon has stopped working properly

  I get this message about the Arcsoft Connect Daemon has stopped working properly.  What are the solutions to this problem?  Thank you.

  Go to: Control Panel, administrative tools, Services of control.

  Double click on Arcsoft Connect Daemon.

  Startup type: disabled

  Location status: stop

  Click on apply, OK

  If you do not use the uninstall program, it also stop him.

  If you use this program reinstall should fix the problem.

• ArcSoft Connect Daemon has stopped working

  At the start of my laptop, I always get the message "ArcSoft Connect Daemon has stopped working". -What this means or what should I do?

  Original title: "ArcSoft Connect Daemon".

  Hello

   
  Remember to make changes to the computer before this problem?

  Method 1:

  You can uninstall and reinstall the software or download the latest version of ArcSoft Connect from the following link and check:

   
  To uninstall a program
  Uninstall a program
  http://Windows.Microsoft.com/en-us/Windows-Vista/uninstall-or-change-a-program
  Method 2: I suggest you to put the computer to own and install the program
   
  Step 1:
  Put the computer to boot and search for the issue.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  
  http://support.Microsoft.com/kb/929135

  Note: once you are done with the boot, follow step 7 of article to put your computer to normal startup.

   
  Step 2:
  To install a program
  http://Windows.Microsoft.com/en-us/Windows-Vista/install-a-program
  Reference:
  
  http://www.arcsoft.com/public/download/arcconnect.asp

   
  
   
  You can also contact ArcSoft support.

  http://www.arcsoft.com/en-us/customer_service.asp

  I hope this helps.

• Error: Arcsoft Connect Daemon has stopped working after the expiration of the trial of Arcsoft.

  Original title: get rid of a software box that says (Arcsoft Connect Daemon has stopped working). Keep on appearing__on from my laptop. ___

  My laptop, age 6 to 7 months running Windows 7, it came with Arcsoft requests to make greeting cards, albums Scrapbook etc.on a 6 month trial I have not tried.2 weeks ago, this box appeared - to the trial period is up and keeps popping up whenever I turned on my PC. I thought uninstall these software will solve the problem, but I was told 'the Installshield engine could not be started. Without this interface taken in charge. I then tried "recovery" back to a point of restoration 2 weeks ago. However, recovery was completed without success due to an error. I repeated the process with a week of 3 restore point but also failed. I think that MS calls this Appcrash.The next step would be to advanced recovery, but I'm not sufficiently confident to do it and the problem is only the latter.

  Hello
   
  ArcSoft is a suite of programs to support management. ArcSoft Connect is used to connect online (updates, new goodies etc.). It would be strange if you "Connect" without any of their products, then you want to uninstall those first, if they exist
   
  In order to eliminate that your computer allows you to try these methods.
   
  Method 1:
   
  If it is installed in C:\Program Files, you can uninstall using programs and features.
   
  Do follow the link provided below.
  Uninstall or change a program
  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program
   
  Method 2:
   
  Try disabling Services "ArcSoft Connect Daemon" service before you start.
   
  To do that you must follow these steps:
   
  1. click on the Start button.
  2. type services.msc in the search field.
  3. now, look for the "ArcSoft Connect Daemon" service and right-click on it and select Disable.
  Now, restart the computer and check if the problem is resolved.
   
  Method 3:
   
  If the method above doesn't resolve the problem, you can try to download the Windows install cleanup and install it on your computer and try to remove the arcsoft program and check the issue.
   
  For this you need to follow the links below.
   
  Description of the Windows Installer CleanUp utility
  http://support.Microsoft.com/kb/290301
   
  For cleaning and installation you can go to the link mentioned below:
   
  http://support.Microsoft.com/kb/923100
   
  Add this link to download the Windows install cleanup:
   
  http://download.Microsoft.com/download/e/9/d/e9d80355-7ab4-45b8-80e8-983a48d5e1bd/msicuu2.exe

  Thank you, and in what concerns:
  I. Suuresh Kumar - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  

• ArcSoft Connect has stopped working properly

  What should I do to fix my arcsoft promble

  'stopped working' or 'stopped working '?
  Was there an error message?
  What happened that pushed you to conclude that "it has stopped working properly?

  Check to see if it works at all the...
  Assuming you are using Vista:

  Start > in the search box, type services > press the Enter key > scroll to ArcSoft Connect..., click on it >
  topic status, it must be said... Has begun
  under Startup Type, it must be said... Automatic
  If it does not say that, right click on ArcSoft Connect... > properties >
  in Startup Type, click on the pointer to the right and change it to automatic
  to the service status, click Start
  Click OK for the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• Windows 8.1 "Adobe Illustrator has stopped working" at startup

  I get the error message "adobe illustrator has stopped working" when you try to start the CC and C64 versions?  Have uninstalled and reinstalled also tried invariably Campability settings without change.  Am a member of the cloud and other Adobe programs work very well just seems to make Illustrator.  This is not a Spanish related issues noted in other post.

  You have a Silhouette cutter? If so, that's the problem. I tried every troubleshooting & finally know now, that's all. If you have Windows, navigate to C:\Program Files\Adobe\Adobe Illustrator CC (64 Bit) \Plug-ins (computer, then program files, adobe, illustrator adobe CC, plug ins. remove the plug in that says scp_cc7)

  Then reopen the adobe Illustrator.

• Adobe photoshop cc 2014 has stopped working (at startup)

  It was the event of the error log:

  Description:

  The failing application name: Photoshop.exe, version: 15.2.0.236, time stamp: 0x542531ba

  The failed module name: igdfcl64.dll, version: 8.1.0.2932, time stamp: 0x50c924e2

  Exception code: 0xc0000005

  Offset: 0 x 0000000000809283

  ID of the process failed: 0 x 1900

  Start time of application vulnerabilities: 0x01cfecb2790603a3

  The failing application path: C:\Program Files\Adobe\Adobe Photoshop CC 2014\Photoshop.exe

  Path of the failing module: C:\windows\SYSTEM32\igdfcl64.dll

  Report ID: cd981be5-58a5-11e4-beb5-681729083fd0

  Faulting full name of the package:

  ID of the failed package-parent application:

  I have an Intel HD Graphics 4000 (pilot: 9.17.10.2932) and I think it's the most recent driver. I don't know why it crashes and I would like to know what I can do to solve the problem.

  Thank you.

  Yes, and as you can see it - your Intel video card driver crashed.

  Update your video card driver Intel since Intel (NOT Microsoft or a system integrator) site.

• Startup error message: "Microsoft Mobile PC presentation adaptability Client has stopped working".

  I recently tried to install SP2 to Vista, but it failed. I tried all the resolutions posted, but it is not always correct it. Later, I started my Vista (automatically restored to SP1) and it came with a mistake, "Microsoft Mobile PC presentation adaptability Client has stopped working". I tried searching on the net for similar problems, but I could not find any solution. He comes back every time you start, after that the background, shortcuts and the system tray loaded. This error started showing when I tried to install SP2, but he failed and returned to changes. I think that something could have gone wrong and that's why it shows this message.   Today I tried the system restore to the restore point JUST before I tried to install SP2, but it ALSO failed and brought me back to the State.
  I'm not sure if it's related, but I'm also no longer be able to use Windows Media Center, as every time I start it I immediately receive the error message "Media Center has stopped working".
  My computer:
  Gateway M6842B laptop
  Version of Windows Vista SP1 32-bit
  Intel Core 2 CPU
  T5300 @1. 73 GHZ 1.73 GHZ
  2.00 GB OF RAM

  Hi zensurferboi,
   
  First, we will check if we get error safe mode, start the computer in Safe Mode reboot and press the F8 key for about four to five times. You'll see the Mode without failure listed in the advanced window options, select Safe Mode, and then press ENTER.
   
  Check if the error mode without failure.
   
  If the startup error message does not appear safe mode, I recommend you to place the computer in a clean boot state, and check if the problem occurs in a clean boot state.
   
  To put the computer in a clean boot state, follow these steps:
   
  Perform a clean boot
   
  Note If the computer is connected to a network, network policy settings may prevent you from following these steps. We recommend strongly that you do not use System Configuration utility to change startup options on the computer, unless a support engineer Microsoft directs you to do so. This can make the computer unusable.
   
  a. log in the computer using an account with administrator rights.
   
  b. click Start , type msconfig.exe in the Start Search box and press ENTER to start the System Configuration utility.
  If you are prompted for an administrator password or for confirmation, type your password, or click continue.
   
  c. under the general tab, click Selective startup, and then clear the Load Startup items check box.
  (The box use the Boot file is not available.)
   
  d. on the Services tab, select the hide all Microsoft services check box and then click on disable all.

  Note Following this step lets services Microsoft continue to run. These services include networking, Plug-and-Play, record of events, error reporting, and other services. If you disable these services, you can permanently delete all restore points. Do not do this if you want to use to restore the system with the existing restore points.
   
  e. click OK, and then click restart.
   
  Once the computer restarts, check if you get the error of starting.
   
  Reset the computer to start as usual
   
  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  1. Click Start , type msconfig.exe in the Start Search box and press ENTER.
  2. If you are prompted for an administrator password or for confirmation, type your password, or click continue.
  3. On the general tab, click the Normal startup option, and then click OK.
  4. When you are prompted to restart the computer, click restart.

  If you don't receive the start-up error message after placing the computer in a clean boot state, follow the steps below in the link to diagnose the program or service that is causing the problem:
   
  How to troubleshoot a problem by performing a clean boot in Windows Vista
   
  http://support.Microsoft.com/kb/929135
   
  I hope this information is useful.
   
  Please let us know if you need further assistance.
   
  Concerning
  Rehman - Microsoft Support

• On startup, I get the messages that applications have stopped working. One of them is (2nd message) IE3SH application has stopped working. How can I fix it?

  Start-up applications to receive messages from windows that have stopped working. One of them is IE3SH application has stopped working. How can I fix it?

  Hi 9gonz9,

  Welcome to the Microsoft Answers site!

  You get this error message when you start the desktop computer?

  You can check if the complete startup items are checked in the msconfig utility.

  1. open System Configuration by clicking Start , clicking Control Panel, clicking system and security, clicking Administrative Tools, and then double-click the System Configuration.

  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  2. click the Startup tab and check if all the items are archived there.

  You can also run a bag of security for your computer and check if this solves the problem.

  http://www.Microsoft.com/Security_Essentials/

  If the problem persists, turn the computer in clean boot and check if all the background program is causing this error message. To help resolve the error and other messages, you can start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  The steps to perform a clean boot are given below:

  1 log on to the computer using an account with administrator rights

  2. click on start, type msconfig.exe in the start search box and press ENTER to start the System Configuration utility.

  If you are prompted for an administrator password or for confirmation, type your password, or click on continue

  3. on the general tab, click Selective startup, and then clear the check box load startup items. (The check box use the file Boot is not available.)

  4. on the Services tab, click to select the skin all the Microsoft services check box, and then click Disable all

  Note: Following this step lets services Microsoft continue to run. These services include networking, Plug-and-Play, record of events, error reporting, and other services. If you disable these services, you can permanently delete all restore points. Do not do this if you want to use with existing restore points system restore utility

  Once you start the office see if you get the error message. If not then follow the divide and conquer method mentioned in the article below to know which program is causing the problem.

  For more information about the clean boot, follow the below given link:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  1. click on start, type msconfig.exe in the start search box and press ENTER.

  If you are prompted for an administrator password or for confirmation, type your password, or click on continue.

  2. on the general tab, click the Normal startup option, and then click OK.

  3. When you are prompted to restart the computer, click on restart

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• F2180 errors at startup as follows - hpqst08.exe and HP CUE status root has stopped working

  I have a HP Deskjet F2180 all-in-One Printer Scanner Copier and is connected to a 32 bit Windows Vista computer.

  My F2180 now allows two error messages at startup as follows:-"hpqst08.exe" and then "HP CUE status root has stopped working."

  hpqst08.exe error reads "the application is not properly initialize (0xc0150004).» Click OK to close the application. »

  HP CUE status root has stopped working reads 'a problem caused blocking the program works correctly. Windows will close the program and notify you if a solution is available. »

  I've uninstalled and reinstalled the software, but the error still occurs.  Seems to have happened after an update of Windows Vista (this machine is rarely connected to the Net).

  Any ideas to fix it please?

  Click Start
  In the search window, type services.msc
  Click on the above result that says services (you may need to right click and choose Run as administrator to open)
  Look for the HP Cue (or similar)
  Make sure it is started and in auto mode (automatic not delayed or manual)

  If it is not automatic, set it to that, and then restart the computer.

  If this does not work

  Click Start
  Type msconfig in the search window
  Click on the above result
  Go to the Startup tab
  Uncheck hpqtray08 and hpqst08.exe if it is in the list
  Click on apply, then OK and perform a restart

• Windows host process Rundll32 has stopped working ONLY at startup on the desktop.

  When I start my Dell Inspiron 531 after that sign in the screen will Dim twice for a few seconds then the Windows host process Rundll32 has stopped working window appears. If you close another small window exactly the same error message mentioned above tells you that Windows will look for a solution but NEVER done. I use AOL version 9.0, I can sign and the big surf for dial-up access. I tried to download free Kaspersky on their site and an error message said it was incomplete or corrupted. I have Windows Security Essentials, Stopzilla, CCleaner, Glary Utilities, you run sfc/scannow, it cleaned up a few files and he tells me that he has no integrity problem after 4 scans. The big short PC but what the _ is causing this Rundll32 error and why is there NO information specific on how to solve this problem? Also Internet Explorer cascades tiles and diverts the PC sometimes force a quick stop, it's really weird to see, very rare but happens. Systerac Fix of Windows crashes after starting an analysis on current user files, really strange, as if something is trying to stop him on purpose. I wish that Microsoft would really worry about the Rundll32 error of work ceased and tell us customers how to fix this shit it is very boring I'll tell you. I want that my host process Rundll32 to work as it did for the past 2 years with no error message at startup. He never gives me these messages while I use the Internet. There are many pages of misinformation out there, can some Microsoft Engineer please give me that a definitive answer in particular to the Windows host process Rundll32 has ceased to function the error at startup ONLY and tell me how to fix Rundll32 file or the process, it would be greatly appreciated? Thank you. Woman

  Hello

  Be careful of having too many programs antivirus/security on the computer running much less
  at the same time. Have a single load at the same time as even the remains of one can cause a lot
  problems.

  ------------------------------------------------------

  What is rundll32.exe and why it works?
  http://www.howtogeek.com/HOWTO/Windows-Vista/what-is-rundll32exe-and-why-is-it-running/

  What is the suspicious Rundll32.exe process?
  http://WindowsXP.MVPs.org/Rundll32.htm

  -----------------------------------------------------

  Try these to erase corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------------

  If no joy trying to determine what is the cause:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see who are loading is method 2 - using MSCONFIG, then post a list
  of these here.

  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out what are the files, registry keys and other objects processes have
  Open, which DLLs they have loaded and more. This exceptionally effective utility will show same
  you who owns each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured so that it starts automatically when your system
  boots and you login. Autoruns shows you the full list of registry and file locations where
  applications can configure Auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Startup Type
  (Registry/Startup folder), Command - Line String, the product name, file Version, company name,.
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  Hope these helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• I received an error message after installation encyclopedia British and this application cannot be open.showing the "Startup MFC application has stopped working". How can I solve this problem?

  I received an error message after the installation of Encyclopedia Britannica and this application cannot be open.showing the "Startup MFC application has stopped working". How can I fix this?

  Hello

  always check the compatibility of vista programs on the link below

  http://www.Microsoft.com/Windows/compatibility/Windows-Vista/default.aspx

  If a program is compatible with vista you can try right click on the setup.exe and then by selecting run as administrator to install it

  It is not compatible with vista, you can try running it in a previous operating system mode

  This does not work for all programs

  read the information below

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-compatibility-mode/

  ____________________________________________________________

  and read this information MS, too

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-the-program-compatibility-Wizard