ARD can not see remote clients via VPN
Hi all. I found not been able to find an answer to what works. I appreciate the help.
I have two networks, home and office, be it online by a router in Time Machine. I set up a VPN server in the office. I can however connect with success at home and can go up to the servers and can control the computer server in ARD. But I don't see any other machines on the network of the company unless I enter their IP directly, and even then I can't control them. I can control the server, and it can see and control the other remote machines. If I'm in the office, I can see and control all machines on the network.
The network router is set to distribute addresses 10.0.1.2 - 200. The home network is set to distribute addresses of 10.0.1.201 - 250. The VPN server has address 10.0.1.250 - 255.
What Miss me? Thank you very much.
for VPN works normally your networks must be in a different IP address ranges
you have everything in 10.0.1 range
for example the Office Network 10.0.1.xxx
network servant 10.0.1.xx
This is maybe the reason why you cannot control the machines.
VPN requires the Remote LAN to be on a different subnet/ip range
If they are no routing etc. can get screwed up like router/VPN cannot know where things are
Try to change your home network to a range of ip address/subnet different example 192.168.1.xx
Tags: Servers and Enterprise Software
Similar Questions
-
RVL200 and Windows 2000 Server - can not access network resources via VPN
I am new to the VPN, and I feel I'm missing something very basic in my configuration. I just installed a RVL200 as the gateway for my corporate network router. The network includes a Windows 2000 Server that acts as server DHCP and several PC and a printer. I was able to "establish a SSL VPN tunnel" home connection to the router, but after recording in everything I see is the screen of virtual Passage - one with lock icons - otherwise I am inside the router. The statement shows that I am connected. Once the tunnel is established, what am I supposed to do to get computers to the computers on my network? I can ping all computers on the network using their LAN address. I'm supposed to see a choice of network resources to get to this point? I put the router as a trusted site in the server and even tried to disable all firewalls, but I see that the VPN screen with icons. I don't know how to proceed from here because I don't know what I'm supposed to see. Thanks for any help that you can give to a newbie!
The SSL connection is only for the VPN router. To access the computer, you can use Windows Remote Desktop connection. So that you can access to remote computers on the network, or you could look for 3 third-party software for remote access
Hope this helps
-
Windows XP pro, can not see desktop (just a blank screen) at startup. can access only via the Task Manager. How can I fix?
In the Task Manager, click on "File" and select "new task (run).
Type explorer.exe, and then press the ENTER key.
If you are able to connect successfully to the windows, scan the entire computer using updated anti-virus software and check the virus.
-
Programmatic access to remote files via VPN on Playbook
Hello
It is technically possible to download remote files via VPN programmatically?
I can't find any documentation on this topic.
Thank you
Oh, not... I don't think it's possible.
-
How to implement a local SOA/BPM project using remote resources via VPN
Hello world
Sorry for the dummy question, but I am a beginner and I'm in trouble with this problem.
This is the scenario: I have to carry a BPM project using JDev 11.1.1.7 on my local environment and then deploy them on remote servers via VPN where a development environment is configured.
All services are on remote servers.
My question is: what I put up in my local environment?
1 DB connection (distance connettion)
2 configuration of MDS to share components?
3 WebLogic server?
3. what else?
Any link o idea to share?
Thank you.
Fairlie
Hello
If you need to deploy and test in your front room to deploy remotely, then you will need to set up all the people in your premises + SOA Suite... If you need to do is put on your local, but can check remotely, you only JDev and connections...
See you soon,.
Vlad
-
WRT1200ac and WRT1900ac OPENVPN can connect but can not see the network
I can connect but can not see the computers on the network. I've tried everything. Any help would be great. Thank you
Firewalls are disabled on remote computers?
-
I can not conect to internet via wifi
I can not conect to the internet using wifi ntl said it's a network adapter error something thing on a yellow triangle on the network 6-4 card, I tried to update the driver but nothing happens
Help me I'm just a newbie to pc
my pc is a hp touchsmart IQ772.uk thanks
Hi paulbeasley,
Thanks for posting in the Microsoft Community.
I understand that you can not connect to Internet via wifi.
Did you change to the computer?
I suggest that you refer the links and check out them.
Windows wireless and wired network connection problems
Network connection problems
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems
Solve problems, find wireless networks
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-finding-wireless-networks
The problems of Internet connection
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems
See also:
You cannot connect to a wireless network on a Windows Vista-based computer
http://support.Microsoft.com/kb/935222
Setting up a wireless network
http://Windows.Microsoft.com/en-us/Windows-Vista/setting-up-a-wireless-network
-
MY PHONE SCREEN IS BLACK, PHONE WILL RING AND ICAN HEAR THROUGH THE MESSAGES BUT CAN NOT SEE ANYTHING AT ALL
Try this restart your iPhone, iPad or iPod touch - Apple Support
If this does not work, it may be a hardware problem.
Hope this helps, good luck to you.
-
I downloaded yesterday 4 services including target word Cup side bar, but can not see.
I activate 4 services, Goal.com , Saavan sidebar and Pocket which I down loaded yesterday, but only can not see.
You can update to Firefox 30? There's a new toolbar button in Firefox 30 to make it easier to show the sidebars. If you want to try, you can use either:
- button "3-bar" menu > "?" button > on Firefox
- (menu bar) Menu help > about Firefox
Firefox should check updates when you open this dialog box.
Or, stick to 29 of Firefox, you can see the view menu. If you do not ordinarily classic menu in the top bar display, you can press the Alt key or press the F10 key to temporarily show. Try:
View > sidebar
and check the desired box it.
-
in Firefox can not see the downloads window, specialist of the jump in the trunk to see - the download speed
Downloaded a lot and now can not see how to fix it?The download Panel has been moved to the upper right corner with a circle arrow down. You can also visit on: downloads of your browser to visit all your downloads.
-
Can not see the images of the patent (that is, D/359 691) on USPTO.gov patent search, it tells me I need a plugin (Quicktime) that I've already updated.
In the 'quick search' I give terms & it compiles a list. I have then cross to every doc and look to see the doc and associated drawings. I don't know what to say at this stage.Thank you.
QuickTime cannot handle images in TIFF format.
You can watch AlternaTIFF - http://www.alternatiff.com/
-
Can not see any of the website features especially icons to link
Can not see any of the website features especially icons to link
See:
-
Skype to the Japan number - call is OK but call the receiver can not see my number
Hi all.
Today I received number of Skype to the Japan, receiving another appeal is OK but when bringing in another receiver can not see my number. I went to the caller identification settings and cannot see the Japan in the list, while number of Skype to the Japan cannot do that, right?
Thanks for reading.
Update: I received Skype confirmatiom. It is correct. Caller ID cannot be used in the Japan.
-
Qosmio G20-127: after that Windows update I can not see list fax and printer
Description of the problem
Model: Toshiba Qosmio G20-127
Operating Sysytem: Microsoft Windows Media Center EditionAfter the restoration of BONE of restore DVD, I can see list Fax and printer. But after the Windows Update I can not see the list of fax and printer and cannot run the Wizard "add a printer".
I just installed printers.
It seems that it s a Microsoft Windows problem and it s not bound Toshiba laptops
See this Microsoft Knowledge base article:
http://support.Microsoft.com/kb/823447/ -
Hi I can not see the App health or my pulse in the looks on my watch even if she is selected to appear on eyes on my phone?
Hello
Slide your finger left or right on the screen.
Also go to ibooks on the user guide iphone download Apple Watch is free.
See you soon
Brian
Maybe you are looking for
-
How can I stop ads sponsored in my Inbox?
"I did a update of Mozilla Firefox and getting started' sponsored ads ' in my email box. How can I stop them?
-
A message from problem Outlook Express crashes, cannot remove
When I get a message from problem in Outlook Express, marked with a blue "down arrow" which means a low priority, it crashes Outl. Expr. so I can't post it, remove it, or anything. I have to close Outl. Exp. and reopen it and avoid to come to her.
-
How can I perform a partial reset on a 6500 all-in-one
OfficeJet 6500 E710n-z (2A98C5), 10.8.2 - OS Maac, my printer don't always work after he falls asleep. I have to turn it off and then turn it back on again. I was told at one point to perform a partial reset, but I forgot how to do this.
-
Password Microsoft WPD enchanced storage driver has a driver problem
I found this same issue as someone else on this forum and did the checker system has been told to and it says Protection Windows did not find any breach of integrity. I don't know why the driver won't install, my windows updates automatically, I am o
-
Problem with drop-down list that prevents the use of the functions, will not go away.
Hello I have Windows 7. I could not afford MS Office, so I downloaded OpenOffice and, later, LibreOffice. My problem is, when I open a document to write in a program, a drop-down list (formatting) is displayed. It starts with "Default" at the top.