Are there special network requirements to use AirDrop?

Similar Questions

• Are there special requirements for the price of introduction to CC for teams?

  Are there special requirements for the price of introduction to CC for teams? A 3rd provider told me the pricing lives and dies with the system it is installed on.  What does that mean?

  Hello

  You can actually have installed creative cloud and on two computers, signed as long as you don't use it on one at a time. Download and install as you did on the first computer, sign in to your Adobe account on the Adobe using your Adobe ID website, download the desktop app from clouds, then download the software.

• Tecra M5: Are there special precautions with the Bios upgrade?

  Are there special precautions he takes while uprading BIOS. I'm just afraid because both failover system report people after the upgrade, is it true?

  Hello

  Of course you need a few special steps if you want to update the BIOS!
  The update of the BIOS is risky! If you use the bad BIOS or bad BIOS update procedure, you may damage the motherboard or module ROM BIOS!
  This is why you should always read the details of upgrading the BIOS before you start the update.

  Finally and above all many people update the BIOS without any reason. That s is really stupid.
  In my opinion you should not update anything if you have no problems!
  Therefore, never change a running system ;)

  You know the technical knowledge of Toshiba?

  http://EU.computers.Toshiba-Europe.com-> download-> Knowledge Base & support

  You will find many useful documents and also the BIOS updated Details

• Are there special procedures when I update mode NX - OS (standalone) mode ACI of NX - 9 K?

  Hello world

  I have two questions.

  First of all, are there special procedures when I update mode NX - OS (standalone) mode ACI of NX - 9 K? For examples, NX - OS version, cards online, EPLDs, licenses and so on. And is it possible back ACI mode mode NX - OX, too?

  Secondly, I know that fabric module (below, FM) s are paired FM1 and 2, 3 and 4, 5 and 6, respectively when there are 48-Port 1 / 10 G T/F Module in the chassis. In this case, if the FM in slot 2 to lose, both links to slots 1 and 2 would be lost because the mux detects the loss of slot 2 and therefore takes traffic slot 1 also, that is, the slots are paired. If so, what are the benefits of an investment FM full? Please share your knowledge with me clear ^ ^

  All your help will be appreciated.

  Paul

  Paul,

  Sorry for the delay... Answers to your two questions.

  1. FM can go in one of the remaining slots. The line cards have Muxes them bound to each FM which is "installed" in the switch.

  2. you original question was related to the switches in the mode of the AIT.  As of today, there is limited line cards that operate in mode of the AIT.  3 FMs provide the necessary conditions for the rate of the line more most of the previously mentioned such line cards.  That said, once you install a N9K X9736PQ a minimum of 6 FMs are needed.  So if you have a failure on one FM, your BW system in the tissue deteriorates. The BW is shared across all line cards until the failed FM is replaced.

  T.

• How to change the highlight color, click the button image and text and sound.  are there packages of buttons for use in my project?

  How to change the highlight color, click the button image and text and sound. are there packages of buttons for use in my project?

  Hello

  Even if the point of things based Web links buttons created using them is of simple images. Captivate uses simple images. If you need to put your creative hat and not to let the fact that you see the word 'web' scared you somehow. An image is an image. Use on the web, use Captivate. Same case!

  If you change the properties of the button, you can activate the legend of success. Fix any sound that you like with the legend of success and it will play when you click the button. If you do not want to see the legend of success, delete the text and configure it as transparent.

  See you soon... Rick

  Useful and practical links Captivate wish form/Bug report form Certified Adobe Captivate training SorcerStone blog Captivate eBooks

• Are there special measures that I must follow before a reinstall of Windows 7 on SSD?

  I read a lot about safe deletion and quick formatting and partitions with regard to SSDS, so I would like to know if I should do something special before reinstalling my OS to an SSD.

  If you do a new install of Windows 7 to a new SSD no special steps required during installation. Some readers SSD require manual 'too provisioning"which is basically leaving on the last 10% of the SSD not allocated.

  Once the installation is complete if the SSD manufacturing is a utility for the management and maintenance of the SSD install and read the guide the user on what the utility includes in the way of features, some of which are for post Windows installation to optimize and maintain the best performance of your SSD.

  If you re - install Windows 7 on an already used SSD then remove 'all' the partitions and perform a "Secure Erase" which will reset the SSD back at his own expense out of the box ("RAW"). And then install Windows.

  J W Stuart: http://www.pagestart.com

• Are there special permissions (file access) required for reports write to temporary files?

  Report BUILDER 11.1.0.7 (64-bit)
  

  Form builder 11.1.2.1.0 (64-bit)
  

  Windows 7 Pro 64-bit

  Java:

  Java version "1.6.0_45".

  Java (TM) SE Runtime Environment (build 1.6.0_45 - b06)

  Java for 64-bit Server VM (build 20.45 - b01, mixed mode)

  IDAutomation LinearBarcode.jar

  
  

  I have a report that prints the data with bar code on the detail rows in a report.  It uses the Java LinearBarcode.jar by Idautomation package for this purpose.  The Java package contains an encoder that returns a bar code in the form of a GIF image to a field on the report.  One of the arguments that it requires is a name of temporary file generated by srw.create_temporary_filename ().  When it works perfectly, and it creates the temporary image file in my folder tree 'House' (C:\Users\ < username > \AppData\Local\Temp) run under the report generator.  When I run this report generator with fast running behind her I can watch the report search, open, read and close this file LinearBarcode.jar several times for successive lines of the report.  Everything seems to be very good in the generator.

  The fun begins when I try to call the same report from a FORM (Form Builder fleeing), where he fails every time, somewhere in the image generation stage.  In my view, that it fails to the creation of the image itself, when he tries to open the file for writing temporary image.  I can find the empty temporary files left after the report runs and fails, but the size of the file is zero byte.  When I run this report of my test form with Microsoft quick run behind it I see the report search, open, read and close this file LinearBarcode.jar for the first line of data in the report, then the report fails.  So, I know that the .jar file and the required REPORTS_CLASSPATH/CLASSPATH entries are synchronized with the location of the .jar file.  The report runs, and he finds the LinearBarcode.jar, it opens, it reads and closes it.  What I do is to not see any activity related to the image itself temporary file.   Thus, failure at least gives the impression of being in the image create step itself, which makes me doubt the safety of Java.  However, there is no message popup on Java security problems.

  I tried implementing Trace for reports, but also, that does not give something of use, except to confirm that the report is certainly a failure in the creation of barcode code somewhere.  This is known from the error message in the log file: fatal error REP-1401 < barcode create procedure name >

  I'm guessing that he might be a missing 'writing' somewhere authorization prevent the creation of the temporary file used to generate the barcode image file. This error only occurs under Java (run from a form). I was not able to find something about it by reading everything I could find on the OracleBarcode.jar demo.  I also not found anything in Google searches that does not count.

  Are special permissions to allow these operations to temporary file as shown above?  If Yes, where and how are they set?  If this isn't the case, else anyone seen this issue before?

  Thanks in advance

  Hank

  Resolved: This issue had nothing to do with the creation of barcodes. It turns out that there is a field in the State who had no defined source. It was not rendered because it was hidden by a format trigger. It seems that this case is handled by the constructor, but blew the engine in the reporting process used when a report is called by the forms. It took a long process of elimination, elimination of triggers, fields, parameters, and even the generation of bar code code until I found it.

  Thank you

  Hank

• Are there ways to increase the use of Win 7 RAM paging/caching memory?

  I have an Intel I5 Ivy Bridge CPU, Win 7 64 bits Home Premium OS, 16 GB of RAM and GPU Nvidia GTX 550 it to 1 GB DDR5 memory.  I run two programs in real-time mapping/trading stocks on two monitors.

  My goals are to improve the time to re - draw screen and reduce the Windows hard disk access.  Although there are alternatives to consider, I would like to invite the community to thoughts on two issues:
  1. how to increase the use of the RAM to the paging/caching window: tools of the surveillance system show that the use of the RAM is about 30% of the installed 16 GB all cached Windows hard disk is constantly busy.   If there is a tweak to increase the use of the RAM, I could develop memory 32 GB RAM.
  2. otherwise, I could install a 120 GB Solid State Drive.  Then, the question is whether you use the SSD for the OS or as according to Intel Rapid Storage disk cache would give the best solution for the above stated objectives?

  My understanding is that the software is responsible for the amount of RAM is used.
  You can't allocate X amount of RAM for a specific task.
  If your software is needed, or could use more RAM than what he's using it now would use it.

  A lot of software still uses the swap file, so do not neglect one
  on your C:\ drive. The HARD drive is still accessible, but more effectively through the PF.
  The PF on an SSD would be slightly faster than a HARD disk. Very slightly.
  SuperFetch must be on a HARD drive.
  I haven't studied Intel Rapid Storage, but a SSD is a beautiful home for the OS.
  I do not think that it would help speed up the re - draw them well.

  Out of specific issues.
  If there is a link with the speed of re - drawing and graphics-
  If you can run two windows on one monitor and to redraw faster than with two
  It may be due to two monitors that requires more bandwidth bandwidth memory (VRAM).
  If you find that's the case then maybe an ATI card with a 256 bit memory bus draws
  a little quicker on two screens as the 550 with it's bus 192-bit memory.

  Depending on your software, you can find that a machine i7 with hyper-threading technology is more
  suitable for your task, but only if the software can make use.

  Of course you would also want a good internet speed if the information is continuously
  Download. Cannot re - draw the data that are not have happened.

  Forums of your software can be a good place to learn as well.
  .

• Are there any older browsers, we use right now?

  I know in the past, we used older versions at the time, he had problems. I would like to know which ones to use works well and is safe. There were so many browsers over the years, I don't know which ones to try. Thank you.
  {

   "application": {
     "name": "Firefox",
     "version": "24.0",
     "userAgent": "Mozilla/5.0 (Windows NT 5.1; rv:24.0) Gecko/20100101 Firefox/24.0",
     "supportURL": "https://support.mozilla.org/1/firefox/24.0/WINNT/en-US/"
   },
   "modifiedPreferences": {
     "browser.cache.disk.capacity": 358400,
     "browser.cache.disk.smart_size.first_run": false,
     "browser.cache.disk.smart_size.use_old_max": false,
     "browser.cache.disk.smart_size_cached_value": 358400,
     "browser.places.smartBookmarksVersion": 4,
     "browser.startup.homepage_override.mstone": "24.0",
     "browser.startup.homepage_override.buildID": "20130910160258",
     "dom.mozApps.used": true,
     "extensions.lastAppVersion": "24.0",
     "network.cookie.prefsMigrated": true,
     "places.history.expiration.transient_current_max_pages": 20118,
     "places.database.lastMaintenance": 1381199361,
     "plugin.importedState": true,
     "plugin.disable_full_page_plugin_for_types": "application/pdf",
     "privacy.sanitize.migrateFx3Prefs": true,
     "storage.vacuum.last.places.sqlite": 1380244034,
     "storage.vacuum.last.index": 1
   },
   "graphics": {
     "numTotalWindows": 4,
     "numAcceleratedWindows": 0,
     "windowLayerManagerType": "Basic",
     "windowLayerManagerRemote": false,
     "numAcceleratedWindowsMessage": [
       "tryNewerDriver",
       "9.6"
     ],
     "adapterDescription": "RADEON 9200 PRO Family (Microsoft Corporation)",
     "adapterVendorID": "0x1002",
     "adapterDeviceID": "0x5960",
     "adapterRAM": "Unknown",
     "adapterDrivers": "ati2dvag",
     "driverVersion": "6.14.10.6462",
     "driverDate": "3-23-2004",
     "adapterDescription2": "",
     "adapterVendorID2": "",
     "adapterDeviceID2": "",
     "adapterRAM2": "",
     "adapterDrivers2": "",
     "driverVersion2": "",
     "driverDate2": "",
     "isGPU2Active": false,
     "direct2DEnabled": false,
     "directWriteEnabled": false,
     "directWriteVersion": "0.0.0.0",
     "direct2DEnabledMessage": [
       "tryNewerDriver",
       "10.6"
     ],
     "webglRendererMessage": [
       "tryNewerDriver",
       "9.6"
     ],
     "info": {
       "AzureCanvasBackend": "skia",
       "AzureFallbackCanvasBackend": "cairo",
       "AzureContentBackend": "none"
     }
   },
   "javaScript": {
     "incrementalGCEnabled": true
   },
   "accessibility": {
     "isActive": false,
     "forceDisabled": 0
   },
   "libraryVersions": {
     "NSPR": {
       "minVersion": "4.10",
       "version": "4.10"
     },
     "NSS": {
       "minVersion": "3.15.1 Basic ECC",
       "version": "3.15.1 Basic ECC"
     },
     "NSSUTIL": {
       "minVersion": "3.15.1",
       "version": "3.15.1"
     },
     "NSSSSL": {
       "minVersion": "3.15.1 Basic ECC",
       "version": "3.15.1 Basic ECC"
     },
     "NSSSMIME": {
       "minVersion": "3.15.1 Basic ECC",
       "version": "3.15.1 Basic ECC"
     }
   },
   "userJS": {
     "exists": false
   },
   "extensions": [
     {
       "name": "Troubleshooter",
       "version": "1.1a",
       "isActive": true,
       "id": "[email protected]"
     },
     {
       "name": "avast! WebRep",
       "version": "7.0.1474",
       "isActive": false,
       "id": "[email protected]"
     },
     {
       "name": "DnsBasic",
       "version": "1.0",
       "isActive": false,
       "id": "{650EED71-89E2-453B-8DCF-2AA1B4AE6EF3}"
     },
     {
       "name": "KnowtheBible",
       "version": "5.24.1.48262",
       "isActive": false,
       "id": "4lffxtbr@BibleTriviaTime_4l.com"
     },
     {
       "name": "Microsoft .NET Framework Assistant",
       "version": "0.0.0",
       "isActive": false,
       "id": "{20a82645-c095-46ed-80e3-08825760534b}"
     }
   ]
  

  }

  Details of the old threads merged with wire. MJB-

  Why do you want to install an older browser (I assume you mean an older version of Firefox, but I'm not sure)? Be more specific about the problem that must be solved.

• Are there licensing weblogic requirements if I upgrade to Forms 10 g and 11 g?

  We intend to make an upgrade of Forms 10 g to 11g.

  However, there will be a change in iAS for Weblogic.

  This will require the licenses to buy for Weblogic or my current support will allow make me Weblogic without any extra cost?

  You will find everything here:

  http://docs.Oracle.com/CD/E28280_01/doc.1111/e14860/products.htm#FMWLC188

  In short, you need to separate license for weblogic, weblogic server is fundamental. (Also check the 'Note').

  Concerning

• Are there examples on how to use ProvisioningService.getProvisionedAccountsForAppInstance ()?

  I'm trying to find an example on how to use ProvisioningService.getProvisionedAccountsForAppInstance ()? (IOM API) without success.

  TIA

  Leo

  Hi Leo

  How are you? Fine? Me too.

  Here is a simple example for you, because I think that the javadoc is not clearly too.

  First of all, you need an instance of the application name. Yes. Not the digital id that was supposed to uniquely identify. The name. You'll like this.

  AppService = oimClient.getService (oracle.iam.provisioning.api.ApplicationInstanceService.class) ApplicationInstanceService;

  Sc SearchCriteria = new SearchCriteria (ApplicationInstance.APPINST_NAME, APPLICATION_INSTANCE_NAME, SearchCriteria.Operator.BEGINS_WITH);

  HashMap vals = null;

  List = appService.findApplicationInstance apps (TS, vals);

  for (ApplicationInstance app: apps) {}

  System.out.println (App.getApplicationInstanceName ()); This one

  System.out.println (App.getApplicationInstanceKey ()); not this one

  }

  Fine. You name? Not the id, do not forget that. Now, follow these steps

  ProvisioningService provService = (oracle.iam.provisioning.api.ProvisioningService.class) oimClient.getService;

  HashMap hm = new HashMap();

  Sc2 SearchCriteria = new SearchCriteria (ProvisioningConstants.AccountSearchAttribute.ACCOUNT_STATUS.getId (), "Configured", SearchCriteria.Operator.EQUAL);

  The list of accounts of = provService.getProvisionedAccountsForAppInstance (thatName, sc2, hm);

  Hooray, you have all put accounts in service!

  What happened to all the accounts? Filters to null, of course

  The list of accounts of = provService.getProvisionedAccountsForAppInstance (thatName, null, null);

  I hope it helps you, Leo. But remember, you still have a lot to learn. It is not documentation. It's you.

  See you soon

  Leo

• Are there any fees for the use of Apple pay?

  Fresh Apple for use of Apple pay?

  You not get charged using Apple pay. Apple is paid under the agreement between Apple pay terminal owner Apple and credit card company.

  All you pay is the price you see when you order

• Try a laptop through a desktop computer wireless network. Office uses a USB plug for internet access.

  I would like to access wireless internet on a laptop (XP; Atheros 802. 11 b / g) with a desktop computer (Win64) that currently, I connect to the internet using a broadband USB connect the device (AT & T USB Mercury).  How can I build a local network of the desktop that I'll be able to connect in the House with the laptop?  Are there restrictions and limitations when using this type of internet connectivity vs a wired version?  (Because of where we live there is no availability ADSL or cable, just wireless).

  Hi Mseibolt,

  Thanks for posting. From your post, it seems you are trying to send a signal from your desktop to your laptop using a wireless signal wireless. It is here that I don't see where you have any broadcasting wireless signal from your desktop. If this is the case, then the current senerio would not possible to establish ICS and have it function to your laptop.

  I hope this helps. Please let me know if you have any questions.

  Shawn - Support Engineer - MCP, MCDST
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• I want to install Srvc Pack 3 for Windows XP on a computer that is not connected to the internet. I already ordered the Windows XP3 installation CD. Are there instructions for my situation?

  I want to install Windows XP, Service Pack 3 on a computer that is not connected to the internet.  I have already ordered the CD of installation of Microsoft.  When the CD comes, there will be instructions for people who are upgrading from Windows XP, Service Pack 2 for Windows XP, Service Pack 3 on computers that are not connected to the internet?  Are there special instructions for people with my situation?

  HI V - ron,
   
  As you have already ordered for the CD of Windows XP Service Pack 3, you can install the operating system by following the on-screen instructions on the CD at the time of installation.
   
  However, I recommend you to go through the articles given before you install Windows XP service pack 3:
  Steps to take before you install Windows XP Service Pack 3
  Information about Windows XP Service Pack 3

• Are there any shortcuts keyboard to place the office in mode 'sleep'?

  Are there keyboard shortcuts can I use to place my office in mode 'sleep'? All mouse and/or the shot is a bit back when it takes literally 2 seconds to do it on a keyboard.

  I've only played with Windows 8 for a week and I'm already screaming, "Microsoft!" PLEEEASE release a version of Windows 8 for DESKTOP computers (aka 8.1)! "IF you do, I can finally replace my droid with MS OS ones.

  When I use this command my computer enters hybrid sleep mode and shuts down completely, it can only be awakened by pressing the power button / stop and wait while the UEFI BIOS load and Windows load before the resumption of the session. If I use the sleep command in the menu of Windows, the computer goes to sleep with the power light on the computer slowly by Flash and it can be awakened by pressing any key on the keyboard.

  Why this happens and I can control what state the computer goes in with a shortcut (vs hybrid sleep sleep)?

  I use a motherboard ASUS Maximus V 8.1 Windows 64.

  EDIT - this site seems to have a solution. I opened a prompt with administrator privileges and run the command:

  powercfg-hibernate off implementation

  Then make a shortcut with this command:

  Rundll32.exe powrprof.dll, SetSuspendState sleep

  The first time I tried the shortcut that put the computer in hibernation. After using the powercfg command, he seemed to sleep properly.

  Here's the site with the full article: http://unlockforus.blogspot.com/2008/03/shutdown-restart-lock-sleep-or.html

  David