Argument of table by calling the function of host 3DAnnots

Similar Questions

• I have the following error on my phone design-MuseJSAssert: error calling the function switch: Error: Invalid argument

  I tried to insert the third party html code 'a noaa weather map' in the design of my phone yesterday. It did not work well. So I deleted this return. Afterwords, I get the following:

  (Message on the Web page "MuseJSAssert: error by calling the function selection: error: invalid argument.")

  I already have all the design is complete and ready to publish. The desktop version works fine. But the design of the phone does not work. For the most part, I noticed that the menu master accordion does not work now.

  Help! I really want to redo the whole phone design. Thanks, H

  I have already found and corrected the error. Apparently, when you bind a phone

  Number of muse, he is not obliged to put a colon: in the figures. I have

  have removed the colon and handed over running the program and the error is cleared

  upward. A clear tutorial on the 'phone links' would be useful.

  Thank you. H

• That is producing this error: MuseJSAssert: error calling the function switch: Error: Invalid argument

  Website: http://lovehopemercy.org/

  In my navigation header by clicking on the option "VISIT US", that is to say generates this error: MuseJSAssert: error calling the function switch: error: invalid argument

  The other options do not work correctly. I get an error on export as HTML of MUSE, but the link works fine in other browsers. I download using Dreamweaver CC 2014. Reversal function works fine; it's the direct click of the menu item at the top that causes the problem.

  Did I miss a bad link or something that I can fix?

  Thanks in advance.

  Hello

  Could you please try some suggestions given here and see if it works for you.

  Error after update today: MuseJSAssert:Error call function argument: Error: Invalid selector

  Let me know if you have any question.

  Concerning

  Vivek

• How to identify which switch in the Panel called the function?

  Here I have some 192 switches and 192 leds corresponding to each switch,

  If a switch is on(say 10th) consequence (10th) led should light up.

  I want to use the same function for all pairs of led switch.

  all I could do was to check the switch in a loop and then set the individual leads, but I find it very little effective way to do it.

  int switchOnOff (int, int int event control panel CVICALLBACK,
  void * callbackData, int eventData1, int eventData2) is the function.

  None of these arguments I can use it to extract what (the unique id for this turnout) switch called the function so that I can pass corresponding led glow?

  It occurred to me now that the table is not necessary at all: you can simply assign to each switch the corresponding ID led the callbackData, so that the code is even simpler than my previous:

  // At panel load:
  SetCtrlAttribute (panelHandle, PANEL_SWITCH1, ATTR_CALLBACK_DATA, (void *)PANEL_LED1);
  ...
  SetCtrlAttribute (panelHandle, PANEL_SWITCH192, ATTR_CALLBACK_DATA, (void *)PANEL_LED192);
  
  // In the control callback
  GetCtrlVal (panel, control, &sts);
  SetCtrlVal (panel, (int)callbackData, sts);
  

  To answer your last question, "Management Board" means immediately after the call to LoadPanel.

• Transfer while calling the function of a trigger

  Hello
  
  I would appreciate if someone can point me in the right direction. So I have a trigger (TableAR_BU) on a table table. This trigger, I have a logic to call the function, and inside this function, I'm just a select statement of a few other tables that the table table.
  Function is supposed to return me 'Y' and it done correctly returns me 'Y' if I select the double feature. -Select the Function1 (100) twice;
  
  But when I call the trigger function, it returns me 'n'. So after investigation, I found that the select statement (selection of table) inside the function returns NULL when called from trigger.
  

   
  DROP TRIGGER TableAR_BU;
  
  CREATE OR REPLACE TRIGGER TableAR_BU
  BEFORE UPDATE
  ON TableAR_BU REFERENCING NEW AS NEW OLD AS OLD
  FOR EACH ROW
  declare
   localcontext varchar2(32000) := '; Context : ';
   sqlstmt varchar2 (2000);
  
   Status varchar2(1);
  
  Status := Function1(:new.Id);
  
  
  End;
  /
  
  
  function Function1(al_Id in TableAR.Id%type)
  RETURN  varchar2 is
  
  lsItemId TableAR.itemId%type;
  
  Begin
  
  Select itemId into lsItemId
  from TableAR
  where id = al_Id;
  
  
  
  Exception
  
  End Function1;

  Suggestions or comments appreciated.
  
  Edited by: Eclipse01 may 1, 2012 11:29

  The problem is that a level trigger line on table cannot query table or whatever it is that questions table call. In the middle of a SQL statement, the table is potentially in an invalid intermediate state if Oracle cannot guarantee that queries on the table return consistent or reasonable results so it does not allow queries of this type.

  99 + % of the time, it's a good thing because it means that you are trying to use triggers for something they are not designed for (in addition to creating applications that are terribly difficult to manage because an action like update a line will eventually create a huge cascade of effects). Most of the time, you are much better to reconsider the architecture and the displacement of the function call out of the trigger and in a sort of API that wraps the UPDATE statement (that is a stored procedure that made the UPDATE and calls the procedure).

  In the <1% of="" the="" cases="" where="" you=""> really want to do in a trigger, you would need a combination of objects (or a trigger composed containing several sections in 11 g). You would need
  -A package with a collection of table primary keys
  -A before the declaration that clears this collection
  -A level trigger line which inserts the: new. ID in the collection
  -A trigger statement that iterates over the collection and calls the function after.

  That, however, is a lot of moving parts to deal with, so it dramatically increases the complexity. If you only want to consider if you are really convinced that you must use triggers in the first place.

  Justin

• which calls the function?

  I have a clip of a square in the library exported as a Square1, I place 2 instances of it on stage and push them into an array called ar
  I add ar event listeners [0] and ar [1] to do a certain function.
  I need flash to tell me that ar [0] or ar [1] called the function. How do I do that?
  Thank you!
  

  Manno is right-

  also great - the loop that you have built it will build not just two 3 instances. However if you are wanting to "store" the index of the item in this instance-specific table, you need to create a property on the instance itself and then reference this prop - as in:

  Add to the loop
  This ['place' + i] .index = i;

  in the use of the Manager
  Event.Target.index

• Call the function in LabView from a DLL, and then access the global variable of DLL

  I've created a DLL in LabWindows with a function and structure.  I want to call the function from LabView and then access the overall structure.  I am able to call the function in the DLL with a "call library function node" and has access to the return value, but I can't understand how to access the overall structure.  The structure is declared in the header DLL with __declspec (dllimport) struct parameters file.

  Is it possible to access this structure without using the library of network variables?

  My guess is that you need two bytes of padding after "in_out" and another to two bytes of padding after "anin."  The reason being that ints are 4 bytes, and most of them C compilers will align on 4-byte boundaries.  The struct will naturally start to such a limit (in fact, in Windows, it will probably start to an 8 byte boundary).  If you then count bytes in your structure, you are 70 byte after "in_out."  70 is not divisible by 4, so you need 2 bytes more to reach the next 4 byte boundary.  You can also you could reorganize your struct so that "anin" follows "in_out" and this is probably the best option if it won't cause you other problems.

  Unlike most C compilers, LabVIEW compressed structures as closely as possible, without filling.  I don't know enough about the history of LabVIEW and internal parts to explain the reasons and to do this performance penalty, but, as choice of LabVIEW "endianness", it is probably a remnant of the first versions of LabVIEW that were running on the Mac.

  If for some reason you want to force your C struct to match package LabVIEW, you can use the #pragma pack (x) directive, but I wouldn't recommend that here because you can control the C and LabVIEW.

  EDIT: in the cases where it was not clear, add padding to your cluster of LabVIEW, insert appropriate size or items at the place desired in the cluster.

• Call the function in the UI part without head

  I develop some app with no head.

  When I change the code in the head part and build - launch. But nothing changes in the part without a head.

  I have another solution call the function in the UI part headless. But whatever it is called.

  Please help me solution?

  The part without head of a long walk without head application is still running in the background. It will not update until you stop the part without a head.

  To stop the game without leading the race, you have three choices:
  (1) build increment in the bar file version - descriptor.xml. This will force the part without head to stop and restart with the new code.

  (2) use the monitor of the device to manually stop your application from running. Then, new launch and your game without head will run the new code.

  3) to implement your own way without a head, like a button that would send a personalized call to headless with (say) action "com.myDomain.myAppName.SHUTDOWN" and when headless receive this invocation, operate you this line:
  BB::application::instance()-> quit()
  This will make the part without head stop, then you run and your part without head will take place the new code.

  I prefer the #3 method, but if you do, don't forget to hide this feature before releasing to the public.

• How to call the function "remote address book look up" J2ME app?

  We develop J2ME on BB and call the function "search of remote address book." any API we can use? Thank you very much!

  You can use BlackBerryContactList J2ME

• Call the function QML from C++ (simple question)

  I guess that's a pretty easy question but I'm a bit new apart from development c ++ of BB10. I have a QML file in the assets folder called Functions.qml which has only onne inside functions.

  import bb.cascades 1.3
  
  Page {
      objectName: "funct"
      function printStat() {
          console.log("hello");
      }
  }
  

  In one of the functions in applicationui.cpp there is a function called resendNotification() (you may know this code from the model of the app without head)

  void ApplicationUI::resendNotification()
  {
      InvokeRequest request;
      request.setTarget("com.example.TestNotificationService");
      request.setAction("com.example.TestNotificationService.RESET");
      m_invokeManager->invoke(request);    // --> call the printStat() function of Functions.qml file
      Application::instance()->minimize();
  }
  

  My question is, before you minimize the app How can I call the function printStat() of the qml file? I have always developed my apps in QML so never had to deal with c ++. Should be easy enough to call a function well.

  Thank you in advance!

  first step is to find the object by ObjectName using findChild, usually from your element root (navigationPane).
  example:
  NAV-> findChild ("myTextField")

  If you have the object of another source that is fine too, of course.

  second step is to use QMetaObject::invokeMethod with the object and the name of the method.
  Example:
  QMetaObject::invokeMethod (container, "setText", Q_ARG (QVariant, text));

• call the function onCreationCompleted c ++ in qml

  I currently have a problem with the c function call ++ QML.

  Œuvres of normal calls. But when I call a function in onCreationCompleted, he cannot access qml object on the page.

  For example:

  {Page}

  onCreationComplete:

  {myFunction() ;}

  Button {}

  ojbectName: "button1".

  }

  }

  MyFunc access using findChild button1.

  But this return 0 x 0, means the button does not exist.

  So how do I access button1 in c ++ to what page is loaded?

  I have posted from a phone, so sorry if there is no error.

  Look, we can't access the qml object when the page is created (we call it in onCreationCompleted). I bypassed by calling the function after navigationpane.push.

• Calling the functions to Iscript

  Hello world

  I hope you all do well. I just want to confirm one thing, is it possible to call functions in Iscript? If so please guide me. Right now I have an Iscript file in hundreds of lines of code. I want to break these lines of code in different functions and call the functions where they needed.

  Thank you

  Take a look at WEBLIB_PORTAL. PORTAL_ADMIN. FieldFormula

  Function: IScript_AdminSiblingNav()

  There are several calls to another position within the IScript.

• Call the function to another tool

  Hi all

  We have used a tool to multiple functions, can I possible to call specific function in the new tool.

  Example:

  Tool 1 (existing)

  Function 1

  2 function

  Function 3

  Function 4

  Tool 2 (new)

  Calling the function (function 1 + 1 tool)

  Thanks in advance,

  Selva

  Possible Yes... use

  #includepath "path of the folder script your tool 1.

  #include "... / outil1 script name.jsx.

• SQL: how to display the second string of the function in the Jobs table only if the function has more than one string.

  SQL: how to display the second string of the function in the Jobs table only if the function has more than one string.

  Hello

  You can use REGEXP_SUBSTR Oracle/PLSQL: REGEXP_SUBSTR function

  Select the function double REGEXP_SUBSTR('PUBLIC RELATION REPRESENTATIVE ','[^]+',1,2);

  Do you have any value of the column as no 2nd string?

• MuseJSAssert: Error calling the function switch: TypeError: undefined is not an object (evaluation of "a.rules")

  I have this error on my Web site every time that I go. It disappears when I refresh three times.

  "MuseJSAssert: error calling the function switch: TypeError: undefined is not an object (evaluation of"a.rules").

  I downloaded the site with Filezila.

  Please help, what's wrong here?

  Thank you

  Hi Barbara,

  The question began to happen after you downloaded using the latest version of Muse?

  If so, can you try to remove the old files of the web server and re-upload using Muse?

  Kind regards

  Akshay