Array of bytes in array of words double

I have a byte array. I take 4 bytes at a time to create a DWORD (32-bit).

I use currently decimate Array and join the numbers twice for do.

Is there a better way to do what I forget?

NYC wrote: I have to perform a manipulation endian. Information is little endian. My original information is a string from a read TCPIP. My current attempt is to be converted to a byte array.

Can you explain more about what I would do in this case?

As I have noted, you can use the chain Unflatten. Since the data comes from a reading of TCP, you can wire that directly to it:

Tags: NI Software

Similar Questions

  • Convert the text string into array of words

    I'm trying to convert an input string of sentence written with spaces between words in an array of strings of 1 d with one word in each element of the array.

    That's what I have so far, but his does not work as I would like.   I have trouble getting in the array to zero at the beginning of each series.

    Thank you

    Why don't you just use the String Array to worksheet and specify a space as a separator?

  • "black square shrinking" appears when some the search results for "Array Constant" are double-cliquée.

    In the process of troubleshooting an issue of size of table, I did a Ctrl + F search after selecting a constant matrix.  I find a large number of raster constants in the search results.  However, many of these results (most behaves normally), if the item in the search results has double-clicked, momentary displays a black square, about the size of a standard icon, which immediately reduced to nothing.  There is no indicator selection outline.  I used this nice ShowAllControls & TabCtrl .vi utility to display all the controls, but nothing appears in this place.

    Someone has encountered this?  So far, it's just a nuisance. I am not free to view the code that was developed by a third party.  I would like to make a screenshot, but the black square disappears too quickly.


  • Add hexadecimal bytes to form a Word

    What is the best way to add the hexadecimal digits in a string to form a Word.

    I am currently using the string into a byte array, then the elements of the array, but this returns a single byte, i.e.xAA + xAA = x 54

    How can I return the full word, that would be x 0154 in this case?

    You cannot have a hexadecimal to 154 in a U8 byte value because you don't have enough bits.

    Take your U8 table and use the conversion to U16 chip found on digital > palette Conversion.  This will give you enough bits so that you can add two U8 and not to roll.

  • faster conversion of DBL in U8 array

    Hello

    I need to convert an array of Monster double of a byte array.

    So first of all, I converted (cast) all details of array of bytes of 8 elements. The result byte array has a size of 8 x Double size of the array.

    It takes so long... Is there a quick way to do it?

    Hi mitulatbati,

    have you tried:

    d ' use pure functions of G instead of node formula?

    or better yet

    -throw the whole OF the loop and directly catalogued the DBL picture to a picture of U8?

  • Error #1010 on a dynamic array of labels?

    I want to create an array of words labels also created dynamically which act like buttons (ie. they are plain text, but are clickable and will highlight the passage of the mouse).  This method works (using names like "word1' 'word2 '... ("' wordN" as the index) for the insertion of the word in a BorderContainer... labels so the table seems to be OK. However, when I go on mouseover, I get TypeError: Error #1010: a term is undefined and has no property.

    Rather enigmatic. This term is undefined and has no properties? I'm assuming I could self-reference events triggering element using 'this'... that is the problem? Do not know why the label can be added as a child element OK, but when I try to access one of the labels in the table, it gives "indefinite term and has no property '...

    private void mouseoverWord(event:Event):void {}
    Event handler for what happens when a mouse over a Word
    clickableArray [this.id] .setStyle ("color", "blue");
    }

    private void mouseclickWord(event:Event):void {}
    Handler for when the word is clicked
    }

    private void createTextWord(word:String,_num:int):void {}
    var wordLabel:spark.components.Label = new spark.components.Label;
    wordLabel.text = Word;
    wordLabel.buttonMode = true;
    wordLabel.addEventListener (MouseEvent.MOUSE_OVER, mouseoverWord);
    wordLabel.addEventListener (MouseEvent.CLICK, mouseclickWord);
    wordLabel.id = "word" + num.toString ()";
    clickableArray [wordLabel.id] = wordLabel;
    }

    > I was assuming that I could self-reference events triggering element using 'this'... that is the problem?

    Perhaps. If this code is in MyApp.mxml (and not in a or , then "it" is a reference to the instance of MyApp.) The object that sent the event's event.target.

    Gordon Smith

    Adobe Flex SDK team

  • create table 1 d of type double

    Hello

    I'm not that good with the labview and when I tried to build a few examples, I got an error as in the attached picture.

    Some can help me create a simple 1-d array of double type in labview2011.

    Thank you.

    Go to help > find examples > search for table > open example of table building.
    -In the example they use digital controls by integer.
    -If you want an array of type double please change the double data type instead of I32.
    S ' Please check this too http://www.ni.com/white-paper/7571/en/

  • Replace words in a string

    Hello

    I try to write a PHP please refer to the page, where users can enter its product reviews, etc.

    I created a MYSQL table that holds different big words I want to cross check against before that I save in the database.

    I saw some PHP examples where 1 Word is used to search in the chain, but not more than 1 Word.

    Is it possible to do it for an array of words?

    Thanks in advance.

    Resolved:

    <>
    $test =;

    $sql1 = "SELECT * FROM swear."
    $result1 = mysql_query ($sql1) or die (mysql_error ());

    $row1 = mysql_fetch_array ($result1);

    $total_rows = count ($row1);

    If ($total_rows > 1)
    {
    While ($row1 = mysql_fetch_array ($result1))
    {
    $test = str_replace($row1['value'],"xxx",$test);
    }
    }

    echo "new channel:". " $test;

    ?>

  • Grouping of words

    Hello!

    I think to try my own kinetic typography video, following the tutorial here:

    So, I'm stuck at the beginning, when it is a grouping of letters in the words within Illustrator.  My problem is this - I have a large amount of text that I use, and selecting each individual word grouping by hand are excessively long.  Is there a faster way to do this?

    I'm not very familiar with Illustrator, but I understand that once I have create outlines for all text, it is treated as a generic object rather than text, correct?  Would it not possible to group all the words in different layers first and THEN create outlines on them?  Or is there another way (a script, or even other software) to do this work faster?

    Thank you very much for the help!

    no problem, here is 1.2 version

    #target illustrator
    
    // script.name = outlineTextMoveWordsToLayers1.2.jsx;
    // script.description = creates outlines and moves each word to a separate layer;
    // script.required = one document with all text in one textFrame;
    // script.parent = CarlosCanto // 7/4/11;
    // script.elegant = false;
    
    var idoc = app.activeDocument; // get activeDocument
    var itext = idoc.textFrames[0]; // get top most textFrame
    var content = itext.contents; // get frame contents
    var allwords = content.split(/\s/g); // get array of words, separated by single space \s
    
    for (i=0; i		   
  • Acrobat form - how to take advantage of the first letters of the words of field.

    I produced my first Acrobat form and am setting the validation rules on certain fields.  I want to ensure all names and addresses are saved with the first letter of each word being a capital as well as the letters are lower case.   While I found and read a few reviews, I have no script experience and positions assume a reasonable understanding of scripting, debugging, etc.

    Could someone please explain how I can achieve this.

    Thank you

    You must understand how the data will be entered and what you want to accomplish. If you want to have a function as title case, then you will need to adjust objects or other words that would not be capitalized. Users will use another character other than a space to separate words?

    Since it is an action of formatting, I would put the script as the custom format or a validation script, so that this code is not rerun each time a field used in a calculation is updated.

    Assuming that only a space character will separate the words, you can use the method '. split() ' to an array of words in the text entered in a field. You can then browse the array of words and affecting the first uppercase character and the rest of the word in lowercase, using the 'substr()' method or other methods of the property of type string.

    The simplest version of this could be:

    aInput var = event.value.split(""); make a table divided in space
    var sCharacter = ";
    Sword of var = ";

    for each element of the word table, uppercase the first letter
    for (i = 0; i
    aInput [i] = aInput [i] .substr (0, 1) .toUpperCase () + aInput [i] .substr (1). toLowerCase();
    } / / end of loop for the input string
    rebuild the input string with words changed with spaces
    Event.Value = aInput.join(' ');

    But since you will repeat this code in several areas, I would create document-level functions, so the code is in one place and be interpreted pre and run faster:

    function UpperCase (sString) {}
    Return sString.toUpperCase ();
    }

    function LowerCase (sString) {}
    Return sString.toLowerCase ();
    }

    function FirstUpperCase (sInput) {}

    aInput var = sInput.split(""); make a table divided in space
    var sCharacter = ";
    Sword of var = ";

    for each element of the word table, uppercase the first letter
    for (i = 0; i
    aInput [i] = uppercase (aInput [i] .substr (0, 1)) + LowerCase (aInput [i] .substr (1));
    } / / end of loop for the input string
    rebuild the input string with words changed with spaces
    Return aInput.join(' ');
    }

    You can then use the following code in each domain where you want to force the first character uppercase:

    Event.Value = FirstUpperCaseinputinputletter for (event.value);

    Another solution would be to use the following code in the format or validate the script:

    Event.Value = event.value.toLowerCase () replace (/ \b\w/g, function (match) {return match.toUpperCase () ;});})

    This script uses the RegEx object and its method of ". replace() ' using a self funciton set with the corresponding string.

  • Diff b/w decision Table created and Word and Excel?

    Hello

    I am curious to know the difference b/w, a decision created in MS Word table and created in MS Excel? Please let me know the considerations in choosing one against the other. I know that some related information is already present on the Webhelp OPM but you would be grateful if anyone can clear it lay off for me.

    Best regards
    CC

    Here are the thoughts that go into my head when I choose between a table of rules in Word and a rules table in Excel:

    * If it's a relatively simple logic that can perfectly be expressed in a Word table, I have an appointment with the word. I find the Word easier to work with, and so I use it unless there is a good reason otherwise.

    * A major difference between the tables of Word and Excel, is that you can have several conclusions in an Excel table (with several columns of the conclusion of a table), whereas with Word tables you can have a conclusion by table. If my logic is such that I want to have several conclusions based on the same conditions, so I usually go with Excel.

    * I would look to the source for guidance material as well. If the material is expressed as a table (especially if the table is too complex for an array of Word), then I would tend to go with Excel.

    * If the logic can be expressed more concisely in an Excel table, then I would usually choose Excel. For example, if he would take the 2 pages of rules of Word to express the logic, as opposed to a concise 1 / / 2 screen Excel table, then I would probably choose Excel.

    See you soon,.
    Jasmine

  • Double click on the arrow to the left on the tab bar creates a new tab at the end of the right hand.

    With Firefox 29.0.1 by double clicking on the arrows on the right in the tab bar or the left creates a new tab at the end of the right hand of the tab bar. It is embarrassing behavior that violates standards around UI design click and double-click. A double-click should extend the behavior of the single click rather than do something completely different (opening a new tab). An example would be, in a Word, a single click selects a Word, double click selects the sentence and a triple click selects the paragraph. Note that this is a separate issue from double click the tab bar itself to create a new tab.

    When there are more tabs on the tabs in the window toolbar, that highlight the tabs on the side will not hold show tab in use. I can click on the left and right arrows at the end of the tab bar to scroll the bar in this sense to bring a tab I want to select in the display. I believe that the double click on the arrow to the left would scroll the bar completely to the right, exposing the tab on the left Double click on the right arrow would scroll the bar left entirely exposing the rightmost tab.

    It is a logical extension and expected behavior of single click. Single click - scroll once (seems to be the value of the tab in three), double-click on - scroll all the way.

    For now, if I want to access the tab on the left, I have to click the arrow slowly and carefully until I get to it. I used only one quick click on the arrow to the left until that shponkah stop scrolling without having to count how many clicks. It is possible that my simple quick clicks were actually double-click. However, the bar tabs would stop scrolling when it reaches the end.

    Now, the behavior is really annoying and unexpected. Double click on left dead entirely right tabs completely left arrow and creates a new tab at the end of the right hand. Ditto the arrow right in the opposite direction.

    While I can (maybe) see that the value of a double click on the tab bar itself to create a new tab, double click on one of the scroll arrows should show a new tab.

    Double click on the arrows of the tab should scroll the tab fully for this purpose bar. If the tab bar is already entirely Scrolls towards ending extra clicks (single, double and triple...) should be ignored.

    I like the idea of opening a new tab to the right of the one that has the focus. This should be an option of the contextual right click menu.

    That should not occur if you click the scroll buttons in the tab bar.
    A double-click should act as page up/down and move a full screen and a triple click should move to the left (first tab) or the right (last) until now tab.

    Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem.

    • Put yourself in the DEFAULT theme: Firefox/tools > Modules > appearance
    • Do NOT click on the reset button on the startup window Mode safe
  • How to set a reminder "anti-double-espace-temps-apres-peines" in APA format?

    I work with windows 7. I have to write a paper in APA format. The 6th edition of the APA States that sentences should have 2 spaces after.

    See if that helps,

    Select all the text,

    http://answers.Microsoft.com/en-us/Office/Forum/Office_2007-Word/double-spacing-in-Word/314f106b-5ad1-4751-a1eb-fbb7997c5bbf

  • Interactive or the missing words Test

    Hi all

    I would like to create an interactive test where my user will be asked to complete the word in a sentence. Something like: the name of the ancient city of Sparta was ________. For each correct answer, I want to give 5 points and for evil responds with 0 points. In addition, I have some sentances with two missing words (for example, the icon in the Church is a _ because the original was _) in which I would give 2.5 points for each correct answer. Finally, the code should calcluate the total score and write it to a file. The steps to resolve this I guess should be something like:

    (1) load each question in a field on the scene (done)
    (2) that the user can type the answer in a field on the scene + instruct him to use commas for the words double (facts)
    (3) have a next button that takes care of the question onstage and:
    (a) write the question and the answer in the text by using Buddy API (fact) file
    (b) give a score for each question (5 simple answers, 2.5 for each word and 0 for false) double
    (c) calculate a total score and write it in the same file.

    (As you understand from the above are my problems with steps b) and c). Any ideas would be very appreciated!

    Thank you very much

    Here is the answer for all those who might need it:

  • USB-2009, Task.Timing.ConfigureSampleClock fails

    I work with a USB-2009 and want to write a byte array to the digital output using DigitalSingleChannelWriter.WriteMultiSamplePort.   The following c# code illustrates what I'm trying to do.  An error occurs when ' task. Timing.ConfigureSampleClock' is performed and the message below.

    I read the documentation of NOR-DAQmx .NET.  It does not specify what are the classes and/or function should not be called on the USB-2009 so I don't know whether or not the "ConfigureSampleClock" can even be used in this situation.

    Can someone tell me or provide me with sample code that shows how a byte array can be sent to the digital output on the USB-2009?  If the USB-2009 is not designed for that, then that would also be helpful to know.    If your example is only for analog output, then I think it would be just as good.  I am able to output a successful single byte, one at a time, on the line of digital output... but not a byte array.

    Thank you

    Ian

    ===============================

    Code example

    Note the following object instances:

    "Simulator" simulates a wave with an amplitude of 255 square

    "deviceID" manages the the string ID of the USB-2009

    int x = - 1;
    Byte [] waveData = new Byte [Simulator. Count];
    {foreach (Double sample in the Simulator)
    waveData [++ x] = Convert.ToByte (sample);
    }

    using (task task = new task ("myTask")) {}
    task. () DOChannels.CreateChannel
    deviceID + "/ port0."
    "myPort."
    ChannelLineGrouping.OneChannelForAllLines
    );

    task. Timing.SampleTimingType = SampleTimingType.OnDemand;
    task. () Timing.ConfigureSampleClock
    String.Empty,
    samplingRate,
    SampleClockActiveEdge.Rising,
    SampleQuantityMode.FiniteSamples,
    Simulator. County
    );
    task. Control (TaskAction.Verify);

    DigitalSingleChannelWriter writer = new DigitalSingleChannelWriter (task. Stream);
    writer. WriteMultiSamplePort (waveData, true);

    } / / using (task task = new Task()) {}

    ===============================

    Error message generated by executing the line "task. Timing.ConfigureSampleClock':

    NationalInstruments.DAQmx.DaqException: The requested value is not supported for this property value.

    Property: NationalInstruments.DAQmx.Timing.SampleTimingType
    You asked: NationalInstruments.DAQmx.SampleTimingType.SampleClock
    You can select: NationalInstruments.DAQmx.SampleTimingType.OnDemand

    Task name: myTask

    State code:-200077

    to nNIMSSAIL100.StatusObserverT<><>otNetApi > >. CheckWithName (StatusObserverT<><>otNetApi > *, tCaseInsensitiveBasicString\,_STL::allocator\,nNIDMXS100::tLocaleConsideringWideStringComparitor\,nNIDMXS100::tLocaleConsideringWideStringCaseForcer>* pName)

    at NationalInstruments.DAQmx.Timing.set_SampleTimingType (SampleTimingType value)

    at NationalInstruments.DAQmx.Timing.ConfigureSampleClock (String signalSource, Double rate, SampleClockActiveEdge activeEdge, SampleQuantityMode sampleMode, Int32 samplesPerChannel)

    at Test.MainForm.testNINetLibrary_Click (Object sender, EventArgs e) in C:\Users\XXXXXl\Documents\Visual Studio\Projects\Digital IO - test\MainForm.cs:line 197

    Hello Ian,

    The error you see is because you try to cinfigure a sample clock that is not actually present.  The USB-6009 case is completely timed software (which means that the values are updated based on your loop rates and the speed at which your computer can change).  It seems that you are calling the right to property, the error message seems a bit misleading.  We can consider the issue to see if it's something that needs to be corrected.  Normally, the timed SW just requests do not configure a sample clock.  Here's an exit code only once, so do not hesitate to repeat just update you need.

    int main (void)
    {
    error int = 0;
    TaskHandle taskHandle = 0;
    data uInt32 = 0xffffffff;
    char errBuff [2048] = {'\0'};
    Int32 wrote;

    /*********************************************/
    DAQmx Configure Code
    /*********************************************/
    DAQmxErrChk (DAQmxCreateTask("",&taskHandle));
    DAQmxErrChk (DAQmxCreateDOChan (taskHandle, "port0/Dev1", "", DAQmx_Val_ChanForAllLines));

    /*********************************************/
    Starting code DAQmx
    /*********************************************/
    DAQmxErrChk (DAQmxStartTask (taskHandle));

    /*********************************************/
    DAQmx write code
    /*********************************************/
    DAQmxErrChk (DAQmxWriteDigitalU32(taskHandle,1,1,10.0,DAQmx_Val_GroupByChannel,&data,&written,));

    Error:
    If (DAQmxFailed (error))
    DAQmxGetExtendedErrorInfo (errBuff, 2048);
    If (taskHandle! = 0) {}
    /*********************************************/
    Stop DAQmx code
    /*********************************************/
    DAQmxStopTask (taskHandle);
    DAQmxClearTask (taskHandle);
    }
    If (DAQmxFailed (error))
    printf ("error DAQmx: %s\n",errBuff); ")
    printf ("end of the program, press the Enter key to quit\n");
    GetChar ();
    return 0;
    }

Maybe you are looking for