Arrow keys on the keyboard. Try to use the keyboard and mouse.

New Gateway laptop with windows 7. I play a lot of games online and I can't find anywhere how to change this, or if it's the phone or the operating system. When I try to play a game on IE with the arrows that they automatically stick causing the game almost impossible to play, also when you try to use the keyboard and the touchpad the touchpad locks when the keyboard is in use. Help, please.

It is a known problem if all goes well with Flash and Internet Explorer.
Source: http://social.answers.microsoft.com/Forums/en-US/vistagaming/thread/d006871e-4701-4e80-9062-197f28251ac5/

The only thing you can do is use another browser until what Adobe fixes the problem.

Tags: Windows

Similar Questions

  • Is it possible to set up a slideshow in Muse that will allow a user to use the arrow keys on the keyboard to advance the slides in a browser?

    Is it possible to set up a slideshow in Muse that will allow a user to use the arrow keys on the keyboard to advance the slides in a browser?

    Hello

    Take a look at a similar debate here

    Re: To navigate in the slide show with the arrow on the keyboard?

    keyboard control arrows to slideshow and lightbox Widget

  • direct selection - move the anchor points with the arrow keys of the keyboard

    Hello

    I use Illustrator CC.  I just use the image tracking tool to create a version vector of my company logo.  It worked pretty well, but now I'm just trying to clean it up a bit.  I have a few anchor points that I want to just push upwards or downwards into the smallest possible increment.

    I think it would be easier for me to do using the arrow keys on the keyboard instead of the mouse, but the arrows cause my selected anchor point to jump in too large a distance way.  I checked to make sure that the bearings commented, snap to grid and snap to Point are all extinct.  I don't see anything else to do.

    Can someone tell me which control how the keyboard arrow keys will move an anchor point, and how can I fix this to the smallest possible distance?

    Thanks in advance,
    Paul

    General Prefs, area keyboard Increments. Have something you need.

    Then use Nudge (up, down, left, right arrow).

  • How can I make my slide show meet the arrow keys on the keyboard?

    Hello

    I think that I actually had the question to say all this.

    A lot of times you run through a slide show, and you can use your arrow keys on the keyboard to move through the slide show.

    Sometimes you must click on the slide show once to get this interactivity.

    Slideshows of Muse widget can do or do I click on slide show arrows to scroll through the show?

    The feature is not supported at this time. Do not hesitate to submit an idea- http://forums.adobe.com/community/muse/ideas

    Available keyboard shortcuts can be found here.

    Windows - http://www.adobekb.com/LiteratureRetrieve.aspx?ID=154624

    Mac - http://www.adobekb.com/LiteratureRetrieve.aspx?ID=154623

    Thank you

    Vinayak

  • All my objects in Indesign are locked. I can move objects with the help of the arrow keys on my keyboard, but not with the mouse. I must have done an order by mistake. Any suggestions?

    All my objects in Indesign are locked. I can move objects with the help of the arrow keys on my keyboard, but not with the mouse. I must have done an order by mistake. Any suggestions?

    Thanks for your help. I work again InDesign brokedown and after a reboot, everything works perfectly fine.

  • Problem with the arrow keys in the editor

    Hi, I have problem with the arrow keys in the editor. I don't use arrow in the editor to the bottom and select list (list of table fields, for example). Arrow in the result window or navigator to work normally.
    In the editor, I have problem with SHIFT + left arrow also key.
    Someone at-similar problem? (Developer SQL 1.5.5 with patch)
    Thanks for your reply, Petr

    Could be the old and known problem with accelerators, try:

    Preferences - accelerators - load - default setting

    Hope that helps,
    K.

  • my pc by using the keyboard and mouse of windows7 freeze after 20 minutes of inactivity

    my pc by using the keyboard and mouse of windows7 freeze after 20 minutes of inactivity

    Hi paulbartolotta,

    Welcome to the Microsoft community. According to the description of the problem, the keyboard and the mouse gel. Provide the following information:

    ·         Did you do changes on the computer before the show?

    ·         You get the error message?

    ·         What is the brand and model of the keyboard and mouse?

    I'll help you with this problem. I suggest you follow these methods.

    Method 1: Run the tool and troubleshooting hardware devices.

    Method 2: Try to use the mouse/keyboard to a different USB port and verify.

    Method 3: Try using the mouse/keyboard on a different computer.

    Method 4: Update the latest drivers/software for the mouse/keyboard.

    Updated a hardware driver that is not working properly

    I hope this helps. Let us know if you need help with windows.

  • Use the keyboard and mouse with xbox 360

    original title: xbox 360

    is it possible to use a keyboard and mouse with an xbox 360 or play them on pc?

    Hi specter1,

    You can use a keyboard and mouse on your Xbox 360. Here's how: http://www.ehow.com/how_6098963_use-keyboard-mouse-xbox-360.html

    teengeek.freehostingcloud.com

  • How to use the Arc keyboard and mouse Arc using the same USB Transceiver?

    I bought a bow from Microsoft and Microsoft Arc mouse keyboard.

    Both devices come with their own 2.4 GHz USB tranceivers.

    I want to connect the keyboard and mouse to a transceiver.

    I can't find any instructions on how to do it.

    In comparison, my Logitech keyboard and mouse comes with software that allows me to pair several devices to the same Transceiver.

    How to connect the keyboard and mouse to a transceiver?

    P.

    As far as I know, you can do that.  If you want the keyboard and mouse on a transceiver, you buy a keyboard/mouse kit, commonly known as a desktop computer.

  • I just bought the wireless desktop 800 Windows keyboard and mouse it does not work on the Windows XP desktop

    I just bought the wireless desktop 800 Windows keyboard and mouse. It works fine on my Win7 laptop but not on my XP desktop even if it says it is compatible with XP. Any advice?

    Hello

     

    Thanks to join Microsoft Community where you will find all necessary information about the Windows operating systems.

    You cannot use the Wireless Desktop 800 keyboard and mouse.

    The problem may occur if the devices are not detected.

    What exactly happens when you try to use the devices?

    A fixit could be used if the devices are not detected.

    See the site:

    Hardware devices do not work or are not detected in Windows

    http://support.Microsoft.com/mats/hardware_device_problems/en-us

    I hope this helps. If the problem persists, or if you have problems of Windows in the future, let us know and we would be happy to help you.

  • Keyboard and mouse stop working at the login screen, but work very well before he gets to connect.

    My keyboard and mouse suddenly stopped working today, I was pressing F11 to try to get the system to boot from a recovery screen and it wouldn't, but when he returned to my screen connection and requested my password it won't let me not use the mouse or the keyboard, I wonder if I accidentally turned off something and if anyone knows how to turn it on turn it back on. I'm using vista on a HP dv5

    Thank you

    Hello Djc618,

    Thank you for your message.  You have a friend or a family member that can allow you to use a keyboard to see if the material can be defective?  You can also try using your keyboard on another computer, if this does not work then you probably have a bad keyboard.
    We can't wait to hear back on your part.
    See you soon

    Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

  • Keyboard and mouse did not work properly after the service pack 2 update

    key Board runs very slowly and mouse runs through the screen when it is used. Acer Aspire 5050-3371 came with Vista home

    Hello

    Do you use a touchpad or mouse wired / wireless?

    Your laptop is connected with laptop keyboard?

    I suggest you to check if the keyboard and mouse work will find in safe mode. Follow the steps that will help you perform the following checks:

    Method 1

    a. restart the computer.
    b. start typing the F8 key.
    c. you get early boot option window.

    For more information, see: the boot advanced (including safe mode) options

     

    After the entry into SafeMode Log in your user account and check if the keyboard and mouse are working.

    After you perform method 1 Troubleshooting and if you find the keyboard and the mouse does not work correctly then you can perform the following procedure.

    Method 2:

    You can also perform the clean boot and check if you are able to start successfully. Clean boot will start Windows Vista by using a minimal set of drivers and startup programs and helps eliminate conflicts of third party software.

    The following link has steps showing how to perform the clean boot: http://support.microsoft.com/kb/929135

    Note: Please make sure that the computer is configured to start as usual according to step 7 of the article: how to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7:http://support.microsoft.com/kb/929135.

    Hope the helps of information. Please post back and we do know.

  • Missing notification icon for wireless keyboard and mouse in the systray area.

    Missing notification icon for wireless keyboard and mouse in the systray area. Was working before the hard disk crash. Had to reload Windows Vista 64 bit OS. Have computer model gateway GT5678.

    Chances are good the software to include these icons in notification tray cam pre-installed on the bridge.  If you still all original gateway software, try to see if something in the menu start / all programs of the gateway seems as it can contain controls for these settings and run the program to check and see if it does.  If none of the gateway software help (assuming that all this is still installed) and re-installing the drivers did not work and there is no controls at the keyboard or the mouse, so I know what else to think.  These icons are not available with Vista - they were installed by a third-party device or software driver.

    I'm sorry that gateway could not help you.  They are those that you need to do to solve this problem, because it is something that they installed with the original computer which is not re-installled after you change hard drives.  They should know what software for it and power point yoo to a download site, or you send a disk with this software.  We can't really do anything else to help you.

    Good luck!

    Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • No response from the keyboard and mouse to the Windows logon.

    Hello, I had this problem a while but a restore fixed it, and of course it happened recently that I want to challenge results.
    Basically, my mouse and my keyboard do not respond before Windows logon.
    Opening height of session does not either.
    The keyboard and mouse seem to work if I go into the conservation program (ESC key at startup and F11).

    I'm running Windows 7 on an HPG60 laptop 64-bit with 3 GB of RAM.
    Processor: Intel (r) Celeron (r) CPU
    900 to 2.20 GHz 2.19 Ghz

    My mouse is actually a touchpad - Synaptics PS/2 Port TouchPad.
    My keyboard is attached to laptop Standard 101/102 - key or Microsoft Natural Keyboard PS/2 with HP QLB.
        
    I need help as SOON as possible so that I can get back to work.

    -Albert

    This is equivalent to the old rule of iron of computing: If you have important files on your PC, then you need to back up an external medium regularly. Problem request not do or wait until you have a major problem. Fortunately, Windows 7 gives you a loop hole. Here's how it works:
    1. get a disk external 2.5 "in a USB case.
    2. connect it to the PC.
    3. set your BIOS so that it uses the DVD drive as its primary boot device.
    4. start the computer with the Windows 7 repair CD or with your Windows 7 installation DVD.
    5. press a button if you are prompted to start from the DVD.
    6. When prompted, select "Safe Mode Command Prompt".
    7. connect as administrator if you are prompted.
    8. Select repair when prompted.
    9. Select command prompt.
    10. save your files or folders on the external USB drive (or a flash drive).
    If you are not familiar with the commands of copy in the command line environment, ask a friend gifted in computer science to help you.

    After solving the problem of keyboard and mouse, do you a favor and use the USB disk as backup media. On a regular basis.

  • With the help of Windows 8 with a wired keyboard and mouse which drags or lethargic

    Hello

    I list a lot on ebay. Recently my mouse and keyboard do not quickly, quite often.  They are very slow.  Letters are missed while he sits there, then appears in.  The keyboard and mouse work fine on MS Word and other applications, but it becomes very frustrating to hold intermittently not working not not back then pop.  Any help is appreciated.

    Sincerely,

    Patric

    Most likely, the problem you are having is that the system is busy on another process and that it cannot respond to the movements of the mouse. Or the system may have blocked entirely (frozen) and could answer is no longer at all.

    If you experience lag or slowless once again, try to open again (Ctrl-Shift-Escape) Task Manager then go to the Details tab of process and write it all down using lots of CPU usage %.  If you recognize the name of the process, you can take measures to put an end to this program to run (right-click on it to put an end immediately if you wish).  If you doesn't recognize, after back here and let us know and we will try to help you identify the culprit.

  • How can keyboard and mouse issues - I solve them? Is this a problem with the computer or device?

    Hello

    Recently (within the last week), I ran into a problem where my computer thinks certain keys/buttons are down.

    They are:

    W

    A

    S

    D

    Q

    E

    Maj

    Space

    Control

    Right-click

    Left click

    These are my most commonly used keys/buttons, so it can become very annoying. In addition, most of the F keys get stuck, but it's because there is something that needs to be cleaned under the feet.

    My questions are: How can I fix? Is this a problem with my computer or my keyboard and mouse?

    He questions, here are my computer Incase care, as well as my keyboard and mouse:

    Inspiron 620, 8 GB RAM Dell, AMD Radeon HD 6450, everything the way it came to the left

    Mad Catz Cyborg S.T.R.I.K.E. 7 keyboard

    Mad Catz Cyborg R.A.T. 9 mouse

    Hello

    Welcome to the Dell Community Forum.

    This can happen due to wear normal use of the keyboard and the mouse, click on this link http://ow.ly/Ermrr which has some steps and download the FIxit. Restart the computer and let us know if this changes anything.

Maybe you are looking for

  • WiFi lost when the PC is closed

    Hello I have a toshiba with a Wireless Linksys network card (PCMCIA) satellite.My problem is that when I shut down the computer, it will "sleep" (the computer power saving mode is standby), the network card stops. When I opened the computer just rest

  • Simple (?) followed by question!

    I have logical X race on El Capitan. Everything works fine; have my guitar as an analogue of entry and use the Amplitube 4 as a software amp. Problem is, I want to play with my registered and drummer songs in Logic X (a few laps of practice before th

  • LapDock 100 impact and update fails?

    I wanted to just confirmation as agglomerates users of photons which are affected by the update has failed can use Lapdock 100 again (as one of the things said in the update has taken over Lapock). I figure that we are still able to use the dock beca

  • ATI Radeon IGP 340 m drivers for Vista?

    I got a Compaq Evo N1020v from a friend, and it's a great PC. But the problem is that it is Windows XP on it, so I had Windows Vista because it is newer and more reliable then the XP that crashed every hour. It works like a charm, but I need the driv

  • print photos from the Gallery

    I try to print photos as attachments to e-mails or saved photo gallery and can not do the job.  What should I do?