Artifact of edge frame when exporting 360

Similar Questions

• Why so large files when exporting?

  Work on a video produced by an organization and to wonder about the size of the file. When I import the movie it is 47.7 MB. Make a new sequence of the clip and immediately exported using "match sequence settings". The resulting file, without any modification whatsoever, is 199.3 MB. Any ideas why this file is 4 times greater when exporting with the same exact settings?

  It depends on what was the Codec to preview of your timeline. When you have created your sequence based on your clip, first did exactly cela, but the codec overview was probably set for MPEG I-Frame. When you exported and you click on "Match sequence settings" you also said creating export this video using coded MPEG. This preview codec is intended to be rendered in your calendar if you have many effects, but it is not the highest quality for export, then so be it you who would almost never optional. But the simple and direct answer is that your input format does not match your output format. Video file size has nothing to do with the images or pixels, only the codec and bitrate. No doubt your 48Mo file was MP4 or H.264. If you want a similar file size then you have to match the settings used for the original video. That being said, if you do this you will lose data because you compresserez a video that was already highly compressed first.

• Grey outline around the objects when exporting to Photoshop

  Hello

  I have a strange issue when exporting with a simple badge that I'm working on Illustrator to Photoshop.

  Everything seems well within the Illustrator, but when I select my creation and copy and paste into Photoshop, then as a "dynamic object" or "pixels", I get a strange gray outline around the objects that should be hidden.

  I use the latest versions of Illustrator and Photoshop 2015 CC and their installation on Mac OSX El Capitan v. 10.11.3

  Edit: I noticed that the compression of the screenshots, it is difficult to see, but it should be very obvious if you download AI and try it yourself.

  I link to the file: http://bit.ly/1QhIi6i

  Best regards

  Rasmus

  

  

  

  

  I think that the problem is more on the side of Photoshop.

  Rasterize the objects in Illustrator; no visible lines.

  Pixelation in Photoshop; the Ant-aliasing artifacts.

  It is easy to reproduce: put a couple of black oval overlaid. Use Pathfinder > divide

  Now you have perfectly fitting distinct forms.

  Copy and paste into Photoshop; lines.

  Rasterize them (or use the pixelation effect) in Illustrator, copy and paste it into Photoshop. no lines.

• Entire computer freezes when exporting

  When export to Mp4 a 26 min don't clip with transitions and other 3 clips all the computer just freezes, no amount of aid in time

  If you need more video I try to predict that

  The original film is the screenshot of Nividia Shadowplay and is a Mp4 file that is 1.4 GB

  It is implemented primers with an intro and outro music video as Mp4 with an another MP4 Player buried on top of the outro

  Thanks for any help provided I'll uplaod a screenshot of the timeline in minutes

  

  It can make to uncompressed AVI, but I'd rather not only...

  Cannot circumvent exactly download 200 GB filess... He came to 199 GB

  Help, please

  nVidia shadowplay https://forums.adobe.com/thread/1914950

• Encrypt a file when exporting to Oracle

  Can encrypt us an entire file when exporting to oracle? I'm generating a CSV file but finally I need to post it on my application, but the only problem is there encryption is implemented on demand in a way as if the file is downloaded from the application, then the file will be automatically encrypted and all by downloading the same file, it will decrypt and display.

  But when I generate the file is the database directly, and then when my shell script to move the file to the DB server to the application server and finally download... does not work because the application attempts to decrypt the file while the file is not encrypted to first step...

  Is there anyway that we can directly encrypt with a key that can be the same password that the application uses too.

  Let me repeat in case you missed it:

  It's your code that creates the CSV file.

  If you can do WHAT you want with the data and the file whenever you want to. If you want to encrypt go ahead.

  Oracle database cannot create or manage CSV files. Client application programs and code to do. Such a file is located in the file system. And it is accessible via standard kernel I/O calls. If you want to encrypt the file created by your application code, then update your application code to support this. It is not a problem of database Oracle.

• Loss of saturation when exporting?

  So I started using Lightroom as well as Photoshop to edit my pictures, I start in Lightroom, then open it in Photoshop, after that I'm done so I can remove unwanted things and add effects of sunlight etc. Before using Lightroom photos exported very well, but now I noticed that when exporting in Photoshop when I'm completely done my photos lose saturation?

  This is what it looks like:

  

  Can someone tell me why this is happening and how I can fix this please?

  Thank you

  Matt.

  Thanks, I'll try it. I came up with a simpler solution, once I'm done in Lightroom, I export instead of open the .tif file in Photoshop with Lr. Then when I'm done in Photoshop I export in PNG and it is great!

• Adobe Premiere Pro cc 2015.2 crashes when exporting

  From one day to the other, Premiere Pro has crashed during editing, but worse: it crashes when exporting.

  Things usually never did not, all of a sudden fool you.

  I've updated my graphics driver, I cleaned my Cache of media, I did a complete reboot and still it crashes. It's a fairly simple change, not even a true documentary, but I can't seem to export

  What is the problem?

  Using Windows 10, i5, Radeon AMD R9 - 270 2GB16GB DDR3

  everything worked great until this week

  Try to create a new project, import the old one in.

• How to include timestamp when exporting?

  Hello

  I leave the timestamp on my images when exporting from lightroom. How can I do so?

  Thank you!

  Check this: export images from Lightroom stamped with geotag information | Nick Nolte Wx

  You need LR/Mogrify2 and ImageMagick

• . Files NEF (Nikon D600) in Camera Raw (bridge CC) appear extremely saturated to the point of loss of data. When exporting, the images are very good.

  . Files NEF (Nikon D600) in Camera Raw (Adobe CC) appear extremely saturated to the point of loss of data. When exporting, the images are very good. There is no update available.

  As it appears in Camera Raw

  

  Exported

  

  In Bridge, open camera raw preferences and uncheck the option of graphics processor at the bottom of the dialog box.

• Can I set up a text watermark so that it inserts the metadata (e.g.Copyright) file when exporting?

  I would like to be able to use a metadata field in a model of watermark. In this way, I don't have to continue to create a new version for each year of copyright and then use this watermark preset when exporting. Much like the Simple copyright law, but with the possibility of placement of control, police, etc.

  Thank you

  Joe Jackson

  It is not possible in the Publisher of watermark in Lightroom. But you can do it by using a plugin like LR/Mogrifyfor Lightroom. It allows you to watermark text including tokens for many fields of metadata, including copyright law, so that the watermark to each image will be created from its own metadata.

• When exporting my image in LR I select my brand of water in the drop-down list. Then I need to select 'Edit watermark' since the same drop-down menu in order to replace it. When I do that and click 'done' the watermark disappears in the export me

  When exporting my image in LR I select my brand of water in the drop-down list. Then I need to select 'Edit watermark' since the same drop-down menu in order to replace it. When I do that and click 'done' the watermark disappears in the box menu to export. When I click on "Export" the image exports WITHOUT my watermark. Help, please. As I did about everything that has been suggested in this forum and I still have this problem.

  I saw that too. For now, the workaround is that if you select 'Edit watermark,' when you are done editing be sure to reselect the same watermark. If you do not, the watermark menu will be empty.

  It seems to be a known bug that occurs only in the current version. If all goes well, it can be fixed in the next update. There is a page for her on the Photoshop/Lightroom Feedback site. I've added my vote to the page:

  LIGHTROOM CC - watermark on the question of export

• CC Moving Photoshop layers when exporting PNG with transparent background

  Hey, if someone could help that would be great.

  I make videos and use photoshop to create subtitles/text using the type tool, transparent background and then superimpose the image file into iMovie.

  However, sometimes photoshop decides to move the text, even if I do not have when exporting, only seems to happen if the background is transparent.

  For example. These two images and if you switch between them quickly enough to create a moving image.

  

  I think you'll find that the border of the images are not the same, because of the background is transparent. You can check by looking at the dimensions in pixels for both images. They should be the same.

• 'Error compiling movie/Unknown Error' when exported.  Great list of ' things I've already tried ' s

  Alright, move to the bottom line here, I spent the last hours 3 juggling with clips and sequences of trying to get my VERY average project to encode and export.  I get the dreaded "error compiling Movie.  Unknown error message.  But there are a few details as to where it is tripping when exporting; more on that later.

  Technical details: iMac, 32 GB of ram, Nvidia 780 M 4 GB, SSD from all around.

  First of all, a list of "Things I've tried."  Which many were inspired by multiple threads, I've already read:

  -Make sure there is not still images exceeding the size of my project (1080 p) settings.  Initially, there was one, it has since then been swapped for a completely different image/picture.  Still unresolved.

  -Make sure there is no offset image drop-down conflicts happening between clips and my settings.

  -All images is 1080 p, so there is no scale happening (not with any of the effects either).

  -Switching to export "in/out sequence" export "entire sequence."

  -Created a new sequence, dropped the sequence published in project parameters matched, tried to export from there.  Same question.

  -A tried to make CBR instead of the variable.

  -Tried to use all the rendering engines (software only, CUDA, OpenCL, etc..)

  -At least a few other things too, but it's so darn late now for this reason, and so I'm so tired that I can't remembering everything.  I'll gladly take any suggestions and report back.

  
  

  Now, I mentioned we're listening at a specific point.  I often read that he goes somewhere around 70% through and is approximately the same in my case.  He arrives at a specific clip/couple of clips and blocks in almost the exact same task.  I messed with these clips too many times to count.  Initially it has been remapped both with keyframes, so I changed it to a constant speed without keyframes. nothing.  Had a directional blur on one of the clips, so I completely; and no change.  I think I tried other things with that particular section of the timeline, but as I said, I'm falling asleep here.

  
  

  Please. Help.  I'm very, very, very close to deserting a ship to FCPX total after so many bugs and crashes (it is not the only issue that hinder the project, as many of you know).  Currently, I am a user of dual-app, different applications for projects depending on how how "inside" I need to get, or if I work with different people on different systems.  But I need something that is RELIABLE.  This is supposed to be a professional software and probably priority #1 for professionals is reliability.  At least in FCP almost everything runs very smooth, and I did not yet have a "can't f * ing finish a project" problem with her.

  I'm sorry, please excuse my behavior; I'm frustrated.

  We have progress!

  So, I've discovered some interesting things (maybe not interesting for anyone who has had or has solved this problem before, but new to me).  It is a long summary of what happened, but I want to explain how I came to the conclusion I did:

  First of all, I took advice from Colin and created a new sequence with the troublesome section, removed all the audio clips.  I thought I could try so suggestion of Ann at the same time, so I deleted FilmConvert not only the effects but ALL the effects of the clip.  The settings include: Filmconvert, directional blur (which a clip has the sum of retouching), speed of adjustment (without keyframes), then an adjustment layer with a very small amount of sharpening applied to it.  I did not remove anything from the adjustment layer.  I then exported with only "Export video" checked.  It worked.

  So, I really wanted to try to pin-point, in hopes of helping someone else in the future.  It's when things are interesting.  So I went back and started around, keeping the audio off the coast and little by little the effects removed.  He went down to the directional blur, which I completely spaced the same mention, because I forgot a little on this subject in the middle of all this (sorry about, 100% my fault not to mention blur; some of you could see as the issue immediately, had I mentioned).  With everything, but directional blur applied, it has exported.  I even put the audio tracks to, re-checked Export Audio, and everything worked well.  So the blur effect seems to be the question... or so it seems.  Another interesting thing that's happened is that for one of the first attempts to export without audio, I left the blur effect but take off FilmConvert.  It worked as well.  Finally, my last attempt was to export everything, audio and video and all the effects, however, this time I noticed that on the second clip in the sequence I had accidentally put the blur directional above FilmConvert in the effects Panel (the other clips there like the last effect applied).  So I moved it back to the bottom of the chain of effects.  Of course, it worked.

  Finally, and above all, I tried full export with effects in their place.  SOUL crashed, twice.  Frustrating, but unfortunately enough widespread lately.  However, the project is export straight out of first, first try.  Feeling very relieved.

  I guess my question now is... Why?  Is - this common with all the effects in the first of blur?  To summarize what the section of the clips looked like, it's just a quick moment of time being accelerated x 5, with a slight blur to simulate an exaggerated movement too vague.  Yes, I do usually this kind of effects in After Effects, with more control and better results, but the project is a quick and informal editing, so I don't bother at first.  A big thank you to all who contributed to the discussion, if your suggestion has directly touched the issue or not, it's the community to commit that really matters.  I hope that son like this can get small bugs like these resolved or help someone in a similar situation to learn how works the effect controls panel.  Nevertheless, there is useful information on this topic, for sure.  Thanks again to all who have helped me learn along the way.

• When exporting photos, lightroom saves several versions of the image on my destination folder

  Hello

  I've been using lightroom for editing my pictures for about a year now.  First, I noticed the problem a few months ago, but did not bother to seek a solution so far.  Whenever I finish photo editing, I export it to my destination folder.  My problem is that when I go in the destination folder, I see several versions of the photo, even if I only export (save) once when I am fully satisfied with the modified final image.  For example, I'll see img_2222, img_2222-2, img_2222-3 and so on, sometimes up to 10 versions.  I also noticed that the images are a little different with the final image is the image with the largest number suffix (for example, img_2222-10).  I hope I am making sense here...

  As you can imagine, it's frustrating, because I end up spending an absurd amount of time to delete the versions that I don't need.  Is there any solution for this?  I searched all the settings and don't see even an option where I can record all the steps of my editing process images...

  Help!

  Hi cindymaya,

  Could you please share the version of Lightroom that you use?

  Could you please share the Lightroom export settings by using a screenshot?

  When you export an image, Lightroom displays the top progress bar left referring to the number of images that are exported.

  This progress bar says exporting a photo when exporting?

  suggest you try to export to a new empty folder, and then check if it exports several versions.

  Kind regards

  Claes

• I would like to create an interactive pdf in Indesign - two guest on 1 page in Indesign that when exporting to adobe reader in pdf format, I can simply add new names that populate both copies and then be printable. Any help out there is how to make an ext

  Two invites on 1 page in Indesign that when exporting to adobe reader in pdf format, I can simply add new names that populate both copies and then be printable. Any help out there is how to make an invitation in Indesign, but now how to make 2 copies on a single page that someone else ie the customer can add their own names. So each field name must complete on both guest. Sounds simple, but is not really there to help. I think he called an interactive pdf. Thanks in advance.

  AutoFill is the easiest part, he lies. If both fields have the same name, they will have the same content: type in one and it appears in the other.