arx modeling: where to start

Similar Questions

• You need to add a 3rd WAP to existing small business network. Where I start?

  The network has 26 ports Cisco switch and 2 existing WAPs, 1 of which is an air 1040, and the other I'm not sure but it resembles that of other.  I need to add a 3rd WAP for a small room.  I was going to use an other cisco 1040 air, but I don't know where to start.  There is a smaller, lighter WAP that works?  I have no experience in network configuration, so I'd like something simple.  Help, please.

  Thank you

  Laura

  Hello Laura

  My name is Eric Moyers, one of the Experts I wireless in the Small Business Support Center.

  Normally, I tell customer to add products similar to their outgoing network when they're trying to develop it. This prevents the learning curves to a minimum and help in getting enlargement and running faster. However, there are time going with brand new products are better, especially if you are trying to integrate the best technologies.

  The Aironet 1040 currently being End of Life / end of sale. You would need to look for a different model.

  He stay with the Enterprise Access Points level, the AIR 1602 has the same capabilitoes as the 104 you're too used. Price range is 300 above low 400 according to one where you look.

  If you want to look at small businesses, we have the WAP561 which is also dual Radio and should do everything the 1040 can or you can look at the WAP371 that is double also but includes a radio that can make the new signal "AC". These two serve 200 upper middle 200 depending on where you look. By the way that they look almost identical to the AIR1040 as well.

  I hope this can help you started, please let me know if I can answer anythin else or go deeper.

  Eric Moyers
  .:|:.:|:. CISCO | Eric Moyers | Cisco technical support |
  Wireless and monitoring subject matter Expert

  Please note useful messages and let others know when your Question has been answered

  You can click on my name next to the image if you want to email me directly

• I keep to confirm my e-mail address, then click the web site on your email address and he sends me back where I started.

  I can't log in FireFox

  What do you mean where I started back

  Copy the link of your mail and post it.
  Also view the web page, on that you have landed.

  HOWEVER replace the last period '.' pointed at "<>"

• FX Android 4.2 Beta: scrolling has recently looked to jump to where you started

  Recently the view has become unusable on many pages. It seems then scroll jumps back where he started. Problem remains without connected keyboard. No problem in Chrome on the same page. If it wasn't for the keyboard down arrow, that works very well, I couldn't use Fx at all.
  FX Beta 22.0 Android on Tablet ASUS Transformer TF700T assorted keyboard/dock.

  The solution was to remove the Quick gestures - I love the addon but the scrolling is more important.

• I lost the bar downstairs where the Start button is

  I need to retrieve the bar downstairs where the Start button is

  Hello

  This is the taskbar - move the mouse completely to the bottom of the screen to see if it appears.

  Right-click of the Start - Properties - taskbar - uncheck Hide tab key automatically the taskbar - check
  Lock the taskbar - APPLY / OK.

  I hope this helps and happy holidays!
  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• where to start with loging in an application

  Hello. Creating a safe space for a BB app being created using SDK5. Very simple with just a user name and the password required. At the login screen and the other screen. Don't check as empty fields etc. But I don't know where to start with the actual coding. More precisely:

  1. where should I store the username and password - what is best practice? Is - XML, databases, persistent storage file?

  2. in what format should I keep it should for example the details be encrypted plain text etc?

  3 - How can I verify that the information entered is asme as whats been stored?

  4 - How can I signout so that details must be entered again again?

  Any help / pointers / links to examples would be appreciated. See you soon

  Welcome on the support forums.

  1 I store small amounts of data in the persistent store, it is the easiest way.

  2 feel free to encrypt, but unless someone knows the key to your persistent store only you can read. If you use a custom object, another application will not be able to open it, but usually I decide by the desire to have data survive an update (custom objects are removed on uninstallation)

  3 is equal to

  4 remove the persistent store, for example

• tried to create a private folder for the work of the book as the in-laws use our computer but don't know where to start and it seems to have sent the info im trying to hide anywhere please help

  tried to create a private folder for the work of the book as the in-laws use our computer but don't know where to start and it seems to have sent the info im trying to hide in every sense, please help, its windows 7 we have, I will learn more about computer but now I have to stop my son-inlaw through my belongings on the computer

  Nancy

                                                 

  Hi Nancy,.

  Encryption of files and folders is a way to protect against unauthorized access. EFS (ENCRYPTING File System) is a Windows feature that you can use to store information on your hard disk in an encrypted format. Encryption is the best protection that Windows provides to help you keep your information secure.

  You can make a folder and then encrypt it.

  http://Windows.Microsoft.com/en-in/Windows7/encrypt-or-decrypt-a-folder-or-file

  Good day!

  Answer please if you face concerns.

• I JUST DOWNLOAD THE CC ON MY DESKTOP N HAVE NO IDEA WHERE TO START PHOTO EDITING IT S LITTLE DIFFERENT OF MY ITEM 12 NEED HELP TO FIND THE TUTORIAL THANK YOU A.S.A.P.

  I JUST DOWNLOAD THE CC ON MY DESKTOP N HAVE NO IDEA WHERE TO START PHOTO EDITING IT S LITTLE DIFFERENT OF MY ITEM 12 NEED HELP TO FIND THE TUTORIAL THANK YOU A.S.A.P.

  Start with the tutorials in the Welcome window to start and takes a course from a site like Lynda.com.

• I am trying to cancel my subscription, but it keeps telling me to contact customer service which brings me to this forum. I followed the links, but then I end up where I started. Why cant I just click Cancel?

  I am trying to cancel my subscription, but it keeps telling me to contact customer service which brings me to this forum. I followed the links, but then I end up where I started. Why cant I just click Cancel? Why can't I talk to someone on the phone?

  In order to cancel the order, please contact customer service

  You can use: http://helpx.adobe.com/x-productkb/global/phone-support-orders.html

  For more information on cancellation: cancel your creative cloud membership

• just signed up convert pdf to docx.  so confused with options do not know where to start

  New on adnobe you want to convert the PDF to word 7 documents.  as many options as I don't know where to start!

  Hi Jim,.

  You can connect to https://cloud.acrobat.com/exportpdf & sign in you using Adobe ID to use export to PDF.

  

  Refer to this document for help using Adobe PDF PackKB.

  Let me know if you are still having a problem. We will be happy to help you.

  Kind regards

  Nicos

• Where to start with Web Services

  We run an ESXi 5 environment with a server for vSphere and are eager to develop a system to be able to create virtual machines.

  I came across the site of the developers of VMware and was very happy to find the vSphere Web Services SDK and wanted to know where to start?

  Y at - it software or settings that must be enabled on the vSphere server or ESXi hosts to allow the use of the SDK?  I downloaded the SDK and trying to connect and have had no success yet, and here the possibility that something is not missing on the server.

  Will there be sites level introduction, articles or tutorials on how to start using the SDK?

  I'd appreciate any help that anyone can provide.

  Thank you

  Matt

  Hi Matt,

  Everything you need to start is available here: http://www.vmware.com/support/developer/vc-sdk/

  It has links to:

  1. the developer's Guide

  2. the Program Guide

  3. the online API reference

  4. the download of the software development kit (if you have not already had it)

  The configuration guide for developers gives you all the steps to configure your system, and how to compile the examples. I suggest you review this first and get to the point where you can run the basic example of program that connects to the ESXi host and gets a few values.

  The configuration guide for developers is divided into separate sections for Java and c#. I'm using c# and the guide was in all on-site.

  The following document to read is the vSphere Web Services SDK Programming Guide - it will help you understand all of the concepts you need for programming with the SDK. The information is presented in a generic way, but samples lean towards Java. But not to worry because the SDK c# samples are many and it is easy to cross things between the Programming Guide and a reference sampling program. This guide is very large ~ 250 pages, but you don't need to read all this, chapters 2 to 5 are what I'm focused on - they are the absolute must know things for relying on web services SDK. What follows I'd say depends on what you need to do with the SDK. A very useful reference when reading the chapters 2 to 5 is the managed object (MOB) on your ESXi host browser. It is accessible at https://your-host-url/mob. You can search the managed objects and explore their hierarchy here.

  Once you understand, I dare say that you are able to start your own program with the help of the API reference of course. In fact you may have already tried poking around with a few lines of code by reading the guide just because it is useful to understand the concepts by testing them with code.

  Also nothing should be done on the server to start to use web services SDK.

• Where to start with recovery after disaster

  We start making a disaster recovery plan for the data center.  We have a small failry installation using vSphere 4.1 Enterprise with 6 hosts (blades) and about 30 vms, Windows, Linux, and Netware running on an IBM BladeCenter S.  The BladeCenter S shared storage in the chassis, and we also have a storage DS3300 iSCSI array.  In the event that something happens to this building we want to be able to bring our most important vms (~ 12 of them, the others will be restored from backup but not immediately) upwards to another place which is connected to this construction over a fiber of 1 GB connection.  We do not necessarily expect to provide the same level of service, just that our basic services are available.

  I understand this is a major project that can be answered in a forum, but I don't know where to start, if someone could point me in the right direction or give me some ideas, I would be happy.

  You need to take a look at the Site Recovery Manager. SRM is unfortunately not the whole solution, you also need the level of the SAN for this replication.

  If you storage does not support it or it's too expensive - you have the option to upgrade to vSphere 5 and use the replication host + RS.

• I have some adobe products, I need to move from a dead computer, they have not been disabled on the old computer. Where to start and what to do?

  I have Adobe Suite Web Premium 4.0, Adobe Suite Standard 4.0 and 12 elements of Photoshop.

  Computers with Standard 4.0 just died, cannot boot and I need to move it to another computer.

  The computer with Web Premium 4.0 is very obsolete and alive, hit and Miss to start the system.

  Photoshop Elements is on my current computer.

  I need to pass all the older machines products, (not disabled) and the 12 elements of PS to my laptop.

  Don't know even where to start...

  4.0 standard is currently on 2 computers, one at work and one at home (dead).

  Web Premium 4.0 is currently on 2 computers, one at work and one at home (alive)

  Photoshop elements 12 is on my current home machine only.

  How can I go on turn off old machines and reinstallation and activation on newer computers?

  Kind regards

  The Turner

  < deleted by the moderator >

  Hi Jeff,

  To make a long story short

  I managed to get access to the limited WARRANTY statement today after a long session with the customer. Confusion with the login resulted from the long period of time since the purchases and long-lost information. I was trying to login to LWS with my own personal login and not the original credentials are most well-known. When I logged on adobe.com with my personal login, he showed the 2 products saved on my account, so the confusion as to why I could not access the LWS. The products were actually recorded under the account of the company under the long-lost login that I managed to pick it up today.

  However, there was always a hurdle. Because we asked digital media with the initial purchase (DVD set), I was told that we don't have access to download the content. At the purchase we thought that we had to pay extra for the DVD media as an additional layer of protection against future problems), certainly never well that pay extra for disks, would be to ban content from Adobe downloads. Uh, won't make this mistake again.

  So, with the discs original picked up from the office, I managed to install the Design Premium on my new computer. It seems that the only downside of the installation from the original disks vs download since the LWS is it seems I can't update anything, if I try to update just said that there are no updates available at this time. I guess that updates are no longer available, where to download the LWS is probably completely up to date with some bugs came after the media.

  That said, we decided to improve the Design Premium to CS6 and I expect an answer by e-mail on their part so I can complete the transaction.

  Thanks so much for your help in this matter, because without it, I would probably be laying on the ground, screaming and pulling my hair out now!

  Kind regards

  Them

• Where to start with e-Commerce

  I am trying to build my first ecommerce site, and I'm having a very difficult time to find where to start. I've been building sites in the Muse and the download of Go Daddy to the FTP host. I want to be able to add products and have a shopping cart, and I'll have the moment the more difficult to find where to start with this. I found a lot of resources in way later down the line. I need the beginners crash course on how to start from scratch. Something will help you! Thank you!

  Hello

  Can you please refer to these forum posts: -.

  Re: How to create a shop online by using Muse?

  Re: adding a shopping cart for muse

  Re: How to create a shop online by using Muse?

  Let me know if you need anything else

  Kind regards

  Rohit Nair

• Where to start in Oracle Apps R12

  Hello
  I am completely new in Oracle Apps. I have a lot of experience in Microsoft technologies (SQL Server, .net), but has never worked in Oracle Apps before. Now, try to learn it.
  I installed Oracle Apps R12 on a virtual linux for learning machine. I selected 'database empty' at the time of installation (i.e. no Vision) and connected as a sysadmin. But now I don't know where to start. Let's say I want to use the financial data module to enter false data and then create a report. Where should I start? I searched in Google but as none of the "beginners" tutorial have this info.
  
  Can someone help me or direct me to a tutorial/documentation that will help me get started?
  
  Thanks for your help.
  
  -Mike

  The installation of any add-on EBS program requires functional knowledge. For example, if you want to start with Financials, you would usually begin with GL. The GL Implementation Guide has the necessary steps - http://docs.oracle.com/cd/E18727_01/doc.121/e13620/toc.htm

  If you do not have a working knowledge, it would be better to help you install the database example of Vision for you to learn your way through the EBS

  HTH
  Srini