ASA 5505 DMZ for the guest wireless access

Hello

Here is my delima:

I'm deploying an Apple Airport Extreme BaseStation with Airport Express 7 "repeaters" throughout my network/building. Apple only allows only two wireless networks, public and private. Your selection of only can 192.168.x.x, 172.13.x.x or 10.10.x.x for each subnet. NO tagging VLAN.

It wasn't my decision... Apple CEO hs fever.

So Im stuck on how to implement this without VLAN. The comments/public subnet needs to be isolated outside access. While the private subnet requires access to both.

Any suggestion would be greatly apprecaited.

What will the Security Plus license allow me to do?

Security over the license allows the use of circuits for the ASA 5505. It also increases the maximum number of VLANS configurable at 20. Allows active failover / standby and increases the number of authorized IPsec VPN tunnels.

The problem with the basic license is that you can have 3 VLAN configured and the 3rd VLAN is a VLAN 'restricted '. This means that you can not pass traffic to or from inside VLAN on the 3rd VLAN (or DMZ VLAN if you prefer to call it that.) So this VLAN DMZ won't be able to communicate with the internet.

So, if your private wireless network and the local network will be on the same subnet your public wireless network can be in VLAN 3. If this isn't the case, you will need to get the security over the license.

--
Please do not forget to rate and choose a good answer

Tags: Cisco Security

Similar Questions

Username or password for the guest OS

Hello
HostOS: Ubuntu 8.10
GuestOS: Windows Server 2003
I'll build a regression test environment and I need to be able to use the command line to start a virtual machine and discover its external IP address so that I can query a database that I have stored on it. I am able to start my virtual machine to the command-line help:
vmrun T - h server http://127.0.0.1:8222 / sdk runProgramInGuest u '[local] Integrated Testing VM/winnetstandard.vmx' C:\Windows\system32\ipconfig.exe
fails with a ' error: username or password for the guest OS.
I assure you that comments username and password I use are valid. I tried with user domain\username, username, etc. I installed the latest VM for the guest OS tools. I tried connecting manually first guest OS, so that the VM tools to perform before I called vmrun. I know I can find the IP address of the guest OS through the section of the status of the web utility or by running the console OS comments; However, in my final project, users will only to have command line access.
What I am doing wrong with my order of runProgramInGuest? Or, better yet, is there a simpler way to get the IP address of the OS from the command line?
I'm under VMServer 2.0 on Ubuntu 8.10 with a guest OS of Windows Server 2003.
Thank you!
I need to start a virtual machine and find the IP address signed by

Check /var/log/vmware/hostd.log on the host

Remember that if you use a format domainsername user then on Linux you need to escape the backslash so it would be the field
username, if you have not indeed get you the error "invalid username or password for the operating system prompted". Similarly to the backslash characters in the path of the program to run in the comments and you must specify the full path.

---

If you have found this device or any other answer useful please consider the use of buttons useful or Correct to award points.

Evaluation version for the cisco secure access control server

Hello

I can get the trial version for the cisco secure access control server. IF SO pls send me the link.

Thank you

Hi Thomas,

You can download ACS for windows 4.1 or 4.2 from the link below:

http://www.Cisco.com/cgi-bin/tablebuild.pl/ACS-win-eval

For ACS 5.x, please visit cisco.com

Download software > Security > Cisco Secure Access Control System 5.x > Secure Access Control System Software

HTH

Kind regards

Jousset

Please evaluate the useful messages-

Increase in the Allocation of disk space for the guest system

I use v.6.5.2 from workstation. I have a lot of excess space on the hard disk of the host system, but with hindsight I initially did not award a sufficient amount of space for the guest system. Is there a quick (and painless!) way in which I can assign storage drive increased the operating system invited without workstation removal and re-Assembly of?
Biggar Gordon
Houston, Texas

If you are just looking for elements run back, I wouldn't have selected Vista for guest OS... Probably be much better to use XP Pro (SP2) than any version of Vista... On the one hand, XP uses much less space on the disk and other... You can run XP Pro (easily) on a vDisk 16-20GB... IF you're dead set on running VIsta, then get the Business edition and who perform. I would never use any of the editions home for any professional use. Windows 7 is much better than Vista (Windows 7 is commonly called "Vista done right" within the it community). I'm actually using Windows 7 Professional x 64 on two of my systems. I have a XP Pro VM on my system main for when I need either the software which is only able to turn it on, or when I need to test something. Otherwise, I stick with Win7 these days.

Vista Home (Basic or Premium) are not exactly the wisest choice for operating systems... Especially if you work on this system...

VMware VCP4

Review the allocation of points for "useful" or "right" answers.

Parallel logic LSI, LSI logic SAS, parallel Buslogic (not recommended for the guest operating system), vmware paravirtual

Infrastructure:
vSphere
ESX 4
Reference Dell R710 Server
I install WIN 2003 x 64 as a virtual server on ESX 4, when I select LSI logic SAS & LSI logic parallel it does not detect the hard drive, do I need driver if so where can I download?
For parallel bus logic (not recommended for the guest operating system) & Vmware paravirtual, do I have to select this option for my win 2003 R2 x 64 edition?
Please help on this issue.
~ Rashid

If you really want to use it for installation, you will need to extract the driver from the VMware Tools ISO and add it to a disk image.

Dave

VMware communities user moderator

New book in town - Start Guide quick vSphere -http://www.yellow-bricks.com/2009/08/12/new-book-in-town-vsphere-quick-start-guide/.

You have a system or a PCI with VMDirectPath? Submit your specifications to the unofficial VMDirectPath HCL - http://www.vm-help.com/forum/viewforum.php?f=21.

Solaris comments vmrun always says ' error: username or password for the guest OS.

VMware Workstation 6.5.1 build-126130
Host Linux, Solaris 10u5 x86_64 comments
No matter what user I try the vmrun will not allow user name or password for the guest OS to accept. I tried the root, a user, and I even tried to make a new user. Any order requiring - vmrun gu - gp fails with ' error: username or password for the guest OS.
Is there a journal file, or something that I can look for a specific diagnosis?

This support is something that we are studying, but I can't give any kind of timeline.

Certainly, you can file a request for assistance on our Web site.

If you are more of a do-it-yourselfer, there is the open-vm-tools project on SourceForge, which leverages the VMware tools and includes the part of the code that implements the operations of comments. We'd love to take all the contributions to this project.

Cisco ASA 5505 site for multiple subnet of the site.

Hello. I need help to configure my cisco asa 5505.

I set up a VPN between two ASA 5505 tunnel

Site 1:

Subnet 192.168.77.0

Site 2:

Have multiple VLANs and now the tunnel goes to vlan400 - 192.168.1.0

What I need help:

Site 1, I need to be able to reach a different virtual LAN on site 2. vlan480 - 192.168.20.0

And 1 site I have to reach 192.168.77.0 subnet of vlan480 - 192.168.20.0

Vlan480 is used for phones. In vlan480, we have a PABX.

Is this possible to do?

Any help would be much appreciated!

Config site 2:

: Saved

:

ASA Version 7.2 (2)

!

ciscoasa hostname

domain default.domain.invalid

activate the password encrypted x

names of

name 192.168.1.250 DomeneServer

name of 192.168.1.10 NotesServer

name 192.168.1.90 Steadyily

name 192.168.1.97 TerminalServer

name 192.168.1.98 eyeshare w8

name 192.168.50.10 w8-print

name 192.168.1.94 w8 - app

name 192.168.1.89 FonnaFlyMedia

!

interface Vlan1

nameif Vlan1

security-level 100

IP 192.168.200.100 255.255.255.0

OSPF cost 10

!

interface Vlan2

nameif outside

security-level 0

IP address 79.x.x.226 255.255.255.224

OSPF cost 10

!

interface Vlan400

nameif vlan400

security-level 100

IP 192.168.1.1 255.255.255.0

OSPF cost 10

!

interface Vlan450

nameif Vlan450

security-level 100

IP 192.168.210.1 255.255.255.0

OSPF cost 10

!

interface Vlan460

nameif Vlan460-SuldalHotell

security-level 100

IP 192.168.2.1 255.255.255.0

OSPF cost 10

!

interface Vlan461

nameif Vlan461-SuldalHotellGjest

security-level 100

address 192.168.3.1 IP 255.255.255.0

OSPF cost 10

!

interface Vlan462

Vlan462-Suldalsposten nameif

security-level 100

192.168.4.1 IP address 255.255.255.0

OSPF cost 10

!

interface Vlan470

nameif vlan470-Kyrkjekontoret

security-level 100

IP 192.168.202.1 255.255.255.0

OSPF cost 10

!

interface Vlan480

nameif vlan480 Telefoni

security-level 100

address 192.168.20.1 255.255.255.0

OSPF cost 10

!

interface Vlan490

nameif Vlan490-QNapBackup

security-level 100

IP 192.168.10.1 255.255.255.0

OSPF cost 10

!

interface Vlan500

nameif Vlan500-HellandBadlands

security-level 100

192.168.30.1 IP address 255.255.255.0

OSPF cost 10

!

interface Vlan510

Vlan510-IsTak nameif

security-level 100

192.168.40.1 IP address 255.255.255.0

OSPF cost 10

!

interface Vlan600

nameif Vlan600-SafeQ

security-level 100

192.168.50.1 IP address 255.255.255.0

OSPF cost 10

!

interface Ethernet0/0

switchport access vlan 2

!

interface Ethernet0/1

!

interface Ethernet0/2

switchport access vlan 500

switchport trunk allowed vlan 400,450,460-462,470,480,500,510,600,610

switchport mode trunk

!

interface Ethernet0/3

switchport access vlan 490

!

interface Ethernet0/4

!

interface Ethernet0/5

!

interface Ethernet0/6

!

interface Ethernet0/7

!

passwd encrypted x

passive FTP mode

clock timezone WAT 1

DNS server-group DefaultDNS

domain default.domain.invalid

permit same-security-traffic inter-interface

permit same-security-traffic intra-interface

Lotus_Notes_Utgaaande tcp service object-group

UT og Frim Notes Description til alle

area of port-object eq

port-object eq ftp

port-object eq www

EQ object of the https port

port-object eq lotusnotes

EQ Port pop3 object

EQ pptp Port object

EQ smtp port object

Lotus_Notes_inn tcp service object-group

Description of the inn og alle til Notes

port-object eq www

port-object eq lotusnotes

EQ Port pop3 object

EQ smtp port object

object-group service Reisebyraa tcp - udp

3702 3702 object-port Beach

5500 5500 object-port Beach

range of object-port 9876 9876

object-group service Remote_Desktop tcp - udp

Description Tilgang til Remote Desktop

3389 3389 port-object range

object-group service Sand_Servicenter_50000 tcp - udp

Description program tilgang til sand service AS

object-port range 50000 50000

VNC_Remote_Admin tcp service object-group

Description Fra ¥ oss til alle

5900 5900 port-object range

object-group service Printer_Accept tcp - udp

9100 9100 port-object range

port-object eq echo

ICMP-type of object-group Echo_Ping

echo ICMP-object

response to echo ICMP-object

object-group service Print tcp

9100 9100 port-object range

FTP_NADA tcp service object-group

Suldalsposten NADA tilgang description

port-object eq ftp

port-object eq ftp - data

Telefonsentral tcp service object-group

Hoftun description

port-object eq ftp

port-object eq ftp - data

port-object eq www

EQ object of the https port

port-object eq telnet

Printer_inn_800 tcp service object-group

Fra 800 thought-out og inn til 400 port 7777 description

range of object-port 7777 7777

Suldalsposten tcp service object-group

Description send av mail hav Mac Mail at - Ã ¥ nrep smtp

EQ Port pop3 object

EQ smtp port object

http2 tcp service object-group

Beach of port-object 81 81

object-group service DMZ_FTP_PASSIVE tcp - udp

55536 56559 object-port Beach

object-group service DMZ_FTP tcp - udp

20 21 object-port Beach

object-group service DMZ_HTTPS tcp - udp

Beach of port-object 443 443

object-group service DMZ_HTTP tcp - udp

8080 8080 port-object range

DNS_Query tcp service object-group

of domain object from the beach

object-group service DUETT_SQL_PORT tcp - udp

Description for a mellom andre og duett Server nett

54659 54659 object-port Beach

outside_access_in of access allowed any ip an extended list

outside_access_out of access allowed any ip an extended list

vlan400_access_in list extended access deny ip any host 149.20.56.34

vlan400_access_in list extended access deny ip any host 149.20.56.32

vlan400_access_in of access allowed any ip an extended list

Vlan450_access_in list extended access deny ip any host 149.20.56.34

Vlan450_access_in list extended access deny ip any host 149.20.56.32

Vlan450_access_in of access allowed any ip an extended list

Vlan460_access_in list extended access deny ip any host 149.20.56.34

Vlan460_access_in list extended access deny ip any host 149.20.56.32

Vlan460_access_in of access allowed any ip an extended list

vlan400_access_out list extended access permit icmp any any Echo_Ping object-group

vlan400_access_out list extended access permit tcp any host NotesServer object-group Lotus_Notes_Utgaaande

vlan400_access_out list extended access permit tcp any host DomeneServer object-group Remote_Desktop

vlan400_access_out list extended access permit tcp any host TerminalServer object-group Remote_Desktop

vlan400_access_out list extended access permit tcp any host http2 object-group Steadyily

vlan400_access_out list extended access permit tcp any host NotesServer object-group Lotus_Notes_inn

vlan400_access_out list extended access permit tcp any host NotesServer object-group Remote_Desktop

vlan400_access_out allowed extended access list tcp any host w8-eyeshare object-group Remote_Desktop

vlan400_access_out allowed extended access list tcp any host w8 - app object-group Remote_Desktop

vlan400_access_out list extended access permit tcp any host FonnaFlyMedia range 8400-8600

vlan400_access_out list extended access permit udp any host FonnaFlyMedia 9000 9001 range

vlan400_access_out list extended access permitted tcp 192.168.4.0 255.255.255.0 host DomeneServer

vlan400_access_out list extended access permitted tcp 192.168.4.0 255.255.255.0 host w8 - app object-group DUETT_SQL_PORT

Vlan500_access_in list extended access deny ip any host 149.20.56.34

Vlan500_access_in list extended access deny ip any host 149.20.56.32

Vlan500_access_in of access allowed any ip an extended list

vlan470_access_in list extended access deny ip any host 149.20.56.34

vlan470_access_in list extended access deny ip any host 149.20.56.32

vlan470_access_in of access allowed any ip an extended list

Vlan490_access_in list extended access deny ip any host 149.20.56.34

Vlan490_access_in list extended access deny ip any host 149.20.56.32

Vlan490_access_in of access allowed any ip an extended list

Vlan450_access_out list extended access permit icmp any any Echo_Ping object-group

Vlan1_access_out of access allowed any ip an extended list

Vlan1_access_out list extended access permit tcp any host w8-print object-group Remote_Desktop

Vlan1_access_out deny ip extended access list a whole

Vlan1_access_out list extended access permit icmp any any echo response

Vlan460_access_out list extended access permit icmp any any Echo_Ping object-group

Vlan490_access_out list extended access permit icmp any any Echo_Ping object-group

Vlan490_access_out list extended access permit tcp any host 192.168.10.10 object-group DMZ_FTP

Vlan490_access_out list extended access permit tcp any host 192.168.10.10 object-group DMZ_FTP_PASSIVE

Vlan490_access_out list extended access permit tcp any host 192.168.10.10 object-group DMZ_HTTPS

Vlan490_access_out list extended access permit tcp any host 192.168.10.10 object-group DMZ_HTTP

Vlan500_access_out list extended access permit icmp any any Echo_Ping object-group

vlan470_access_out list extended access permit icmp any any Echo_Ping object-group

vlan470_access_out list extended access permit tcp any host 192.168.202.10 - group Remote_Desktop object

Vlan510_access_out list extended access permit icmp any any Echo_Ping object-group

vlan480_access_out of access allowed any ip an extended list

Vlan510_access_in of access allowed any ip an extended list

Vlan600_access_in of access allowed any ip an extended list

Vlan600_access_out list extended access permit icmp any one

Vlan600_access_out list extended access permit tcp any host w8-print object-group Remote_Desktop

Vlan600_access_out list extended access permitted tcp 192.168.1.0 255.255.255.0 host w8-printing eq www

Vlan600_access_out list extended access permitted tcp 192.168.202.0 255.255.255.0 host w8-printing eq www

Vlan600_access_out list extended access permitted tcp 192.168.210.0 255.255.255.0 host w8-printing eq www

Vlan600_access_in_1 of access allowed any ip an extended list

Vlan461_access_in of access allowed any ip an extended list

Vlan461_access_out list extended access permit icmp any any Echo_Ping object-group

vlan400_nat0_outbound to access ip 192.168.1.0 scope list allow 255.255.255.0 192.168.77.0 255.255.255.0

outside_20_cryptomap_1 to access ip 192.168.1.0 scope list allow 255.255.255.0 192.168.77.0 255.255.255.0

outside_20_cryptomap to access ip 192.168.1.0 scope list allow 255.255.255.0 192.168.77.0 255.255.255.0

access-list Vlan462-Suldalsposten_access_in extended ip allowed any one

access-list Vlan462-Suldalsposten_access_out extended permit icmp any any echo response

access-list Vlan462-Suldalsposten_access_out_1 extended permit icmp any any echo response

access-list Vlan462-Suldalsposten_access_in_1 extended ip allowed any one

pager lines 24

Enable logging

asdm of logging of information

MTU 1500 Vlan1

Outside 1500 MTU

vlan400 MTU 1500

MTU 1500 Vlan450

MTU 1500 Vlan460-SuldalHotell

MTU 1500 Vlan461-SuldalHotellGjest

vlan470-Kyrkjekontoret MTU 1500

MTU 1500 vlan480-Telefoni

MTU 1500 Vlan490-QNapBackup

MTU 1500 Vlan500-HellandBadlands

MTU 1500 Vlan510-IsTak

MTU 1500 Vlan600-SafeQ

MTU 1500 Vlan462-Suldalsposten

no failover

Monitor-interface Vlan1

interface of the monitor to the outside

the interface of the monitor vlan400

the interface of the monitor Vlan450

the interface of the Vlan460-SuldalHotell monitor

the interface of the Vlan461-SuldalHotellGjest monitor

the interface of the vlan470-Kyrkjekontoret monitor

Monitor-interface vlan480-Telefoni

the interface of the Vlan490-QNapBackup monitor

the interface of the Vlan500-HellandBadlands monitor

Monitor-interface Vlan510-IsTak

Monitor-interface Vlan600-SafeQ

the interface of the monitor Vlan462-Suldalsposten

ICMP unreachable rate-limit 1 burst-size 1

ASDM image disk0: / asdm - 522.bin

don't allow no asdm history

ARP timeout 14400

Global 1 interface (outside)

vlan400_nat0_outbound (vlan400) NAT 0 access list

NAT (vlan400) 1 0.0.0.0 0.0.0.0 dns

NAT (Vlan450) 1 0.0.0.0 0.0.0.0 dns

NAT (Vlan460-SuldalHotell) 1 0.0.0.0 0.0.0.0

NAT (Vlan461-SuldalHotellGjest) 1 0.0.0.0 0.0.0.0

NAT (vlan470-Kyrkjekontoret) 1 0.0.0.0 0.0.0.0

NAT (Vlan490-QNapBackup) 1 0.0.0.0 0.0.0.0 dns

NAT (Vlan500-HellandBadlands) 1 0.0.0.0 0.0.0.0

NAT (Vlan510-IsTak) 1 0.0.0.0 0.0.0.0

NAT (Vlan600-SafeQ) 1 0.0.0.0 0.0.0.0

NAT (Vlan462-Suldalsposten) 1 0.0.0.0 0.0.0.0

static (vlan400, external) 79.x.x.x DomeneServer netmask 255.255.255.255

static (vlan470-Kyrkjekontoret, external) 79.x.x.x 192.168.202.10 netmask 255.255.255.255

static (vlan400, external) 79.x.x.x NotesServer netmask 255.255.255.255 dns

static (vlan400, external) 79.x.x.231 netmask 255.255.255.255 TerminalServer

static (vlan400, external) 79.x.x.234 Steadyily netmask 255.255.255.255

static (vlan400, outside) w8-eyeshare netmask 255.255.255.255 79.x.x.232

static (Vlan490-QNapBackup, external) 79.x.x.233 192.168.10.10 netmask 255.255.255.255 dns

static (Vlan600-SafeQ, external) 79.x.x.235 w8 - print subnet mask 255.255.255.255

static (vlan400, outside) w8 - app netmask 255.255.255.255 79.x.x.236

static (Vlan450, vlan400) 192.168.210.0 192.168.210.0 netmask 255.255.255.0

(Vlan500-HellandBadlands, vlan400) static 192.168.30.0 192.168.30.0 netmask 255.255.255.0

(vlan400, Vlan500-HellandBadlands) static 192.168.1.0 192.168.1.0 netmask 255.255.255.0

(vlan400, Vlan450) static 192.168.1.0 192.168.1.0 netmask 255.255.255.0

static (vlan400, external) 79.x.x.252 FonnaFlyMedia netmask 255.255.255.255

static (Vlan462-Suldalsposten, vlan400) 192.168.4.0 192.168.4.0 netmask 255.255.255.0

static (vlan400, Vlan462-Suldalsposten) 192.168.1.0 192.168.1.0 netmask 255.255.255.0

static (vlan400, Vlan600-SafeQ) 192.168.1.0 192.168.1.0 netmask 255.255.255.0

static (Vlan600-SafeQ, vlan400) 192.168.50.0 192.168.50.0 netmask 255.255.255.0

static (Vlan600-SafeQ, Vlan450) 192.168.50.0 192.168.50.0 netmask 255.255.255.0

static (Vlan600-SafeQ, vlan470-Kyrkjekontoret) 192.168.50.0 192.168.50.0 netmask 255.255.255.0

static (Vlan450, Vlan600-SafeQ) 192.168.210.0 192.168.210.0 netmask 255.255.255.0

static (vlan470-Kyrkjekontoret, Vlan600-SafeQ) 192.168.202.0 192.168.202.0 netmask 255.255.255.0

Access-group interface Vlan1 Vlan1_access_out

Access-group outside_access_in in interface outside

Access-group outside_access_out outside interface

Access-group vlan400_access_in in the vlan400 interface

vlan400_access_out group access to the interface vlan400

Access-group Vlan450_access_in in the Vlan450 interface

Access-group interface Vlan450 Vlan450_access_out

Access-group interface Vlan460-SuldalHotell Vlan460_access_in

Access-group interface Vlan460-SuldalHotell Vlan460_access_out

Access-group interface Vlan461-SuldalHotellGjest Vlan461_access_in

Access-group interface Vlan461-SuldalHotellGjest Vlan461_access_out

Access-group vlan470_access_in in interface vlan470-Kyrkjekontoret

vlan470_access_out access to the interface vlan470-Kyrkjekontoret group

access to the interface vlan480-Telefoni, vlan480_access_out group

Access-group interface Vlan490-QNapBackup Vlan490_access_in

Access-group interface Vlan490-QNapBackup Vlan490_access_out

Access-group interface Vlan500-HellandBadlands Vlan500_access_in

Access-group interface Vlan500-HellandBadlands Vlan500_access_out

Access-group interface Vlan510-IsTak Vlan510_access_in

Access-group interface Vlan510-IsTak Vlan510_access_out

Access-group Vlan600_access_in_1 interface Vlan600-SafeQ

Access-group Vlan600_access_out interface Vlan600-SafeQ

Access-group Vlan462-Suldalsposten_access_in_1 Vlan462-Suldalsposten interface

Access-group Vlan462-Suldalsposten_access_out_1 Vlan462-Suldalsposten interface

Route outside 0.0.0.0 0.0.0.0 79.x.x.225 1

Timeout xlate 03:00

Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00

Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00

Timeout, uauth 0:05:00 absolute

x x encrypted privilege 15 password username

the ssh LOCAL console AAA authentication

Enable http server

http 192.168.210.0 255.255.255.0 Vlan450

http 192.168.200.0 255.255.255.0 Vlan1

http 192.168.1.0 255.255.255.0 vlan400

No snmp server location

No snmp Server contact

SNMP-Server Community public

Server enable SNMP traps snmp authentication linkup, linkdown cold start

Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac

card crypto outside_map 20 match address outside_20_cryptomap_1

card crypto outside_map 20 set pfs

peer set card crypto outside_map 20 62.92.159.137

outside_map crypto 20 card value transform-set ESP-3DES-SHA

outside_map interface card crypto outside

crypto ISAKMP allow outside

ISAKMP crypto enable vlan400

crypto ISAKMP policy 10

preshared authentication

3des encryption

sha hash

Group 2

life 86400

tunnel-group 62.92.159.137 type ipsec-l2l

IPSec-attributes tunnel-group 62.92.159.137

pre-shared-key *.

Telnet 192.168.200.0 255.255.255.0 Vlan1

Telnet 192.168.1.0 255.255.255.0 vlan400

Telnet timeout 5

SSH 171.68.225.216 255.255.255.255 outside

SSH timeout 5

Console timeout 0

dhcpd update dns both

!

dhcpd option 6 ip 81.167.36.3 81.167.36.11 interface Vlan1

!

dhcpd option 6 ip 81.167.36.3 81.167.36.11 outside interface

!

dhcpd address 192.168.1.100 - 192.168.1.225 vlan400

dhcpd option ip 6 DomeneServer 81.167.36.11 interface vlan400

dhcpd option 3 ip 192.168.1.1 interface vlan400

vlan400 enable dhcpd

!

dhcpd address 192.168.210.100 - 192.168.210.200 Vlan450

dhcpd option 6 ip 81.167.36.3 81.167.36.11 interface Vlan450

dhcpd ip interface 192.168.210.1 option 3 Vlan450

enable Vlan450 dhcpd

!

dhcpd address 192.168.2.100 - 192.168.2.150 Vlan460-SuldalHotell

dhcpd option 6 ip 81.167.36.3 81.167.36.11 interface Vlan460-SuldalHotell

dhcpd 192.168.2.1 ip interface option 3 Vlan460-SuldalHotell

dhcpd enable Vlan460-SuldalHotell

!

dhcpd address 192.168.3.100 - 192.168.3.200 Vlan461-SuldalHotellGjest

dhcpd option 6 ip 81.167.36.3 81.167.36.11 interface Vlan461-SuldalHotellGjest

dhcpd ip interface 192.168.3.1 option 3 Vlan461-SuldalHotellGjest

dhcpd enable Vlan461-SuldalHotellGjest

!

dhcpd address 192.168.202.100 - 192.168.202.199 vlan470-Kyrkjekontoret

interface of dhcpd option 3 ip 192.168.202.1 vlan470-Kyrkjekontoret

dhcpd option 6 ip 81.167.36.3 81.167.36.11 interface vlan470-Kyrkjekontoret

dhcpd enable vlan470-Kyrkjekontoret

!

dhcpd option 3 192.168.20.1 ip interface vlan480-Telefoni

dhcpd option 6 ip 81.167.36.3 81.167.36.11 interface vlan480-Telefoni

!

dhcpd address 192.168.10.80 - 192.168.10.90 Vlan490-QNapBackup

dhcpd option 6 ip 81.167.36.3 81.167.36.11 interface Vlan490-QNapBackup

dhcpd 192.168.10.1 ip interface option 3 Vlan490-QNapBackup

!

dhcpd address 192.168.30.100 - 192.168.30.199 Vlan500-HellandBadlands

dhcpd option 6 ip 81.167.36.3 81.167.36.11 interface Vlan500-HellandBadlands

dhcpd ip interface 192.168.30.1 option 3 Vlan500-HellandBadlands

dhcpd enable Vlan500-HellandBadlands

!

dhcpd address 192.168.40.100 - 192.168.40.150 Vlan510-IsTak

dhcpd option 6 ip 81.167.36.3 81.167.36.11 interface Vlan510-IsTak

dhcpd 3 ip Vlan510-IsTak 192.168.40.1 option interface

Vlan510-IsTak enable dhcpd

!

dhcpd address 192.168.50.150 - 192.168.50.199 Vlan600-SafeQ

dhcpd option 6 ip 81.167.36.3 81.167.36.11 interface Vlan600-SafeQ

Vlan600-SafeQ enable dhcpd

!

dhcpd address 192.168.4.100 - 192.168.4.150 Vlan462-Suldalsposten

interface option 6 ip DomeneServer 81.167.36.11 Vlan462-Suldalsposten dhcpd

interface ip dhcpd option 3 Vlan462-Suldalsposten 192.168.4.1

Vlan462-Suldalsposten enable dhcpd

!

!

!

!

type of policy-card inspect dns preset_dns_map

parameters

message-length maximum 512

!

context of prompt hostname

Cryptochecksum:x

: end

Site 1 config:

: Saved

:

ASA Version 7.2 (4)

!

ciscoasa hostname

domain default.domain.invalid

activate the password encrypted x

passwd encrypted x

names of

!

interface Vlan1

nameif inside

security-level 100

IP 192.168.77.1 255.255.255.0

!

interface Vlan2

nameif outside

security-level 0

PPPoE Telenor customer vpdn group

IP address pppoe setroute

!

interface Ethernet0/0

switchport access vlan 2

!

interface Ethernet0/1

!

interface Ethernet0/2

!

interface Ethernet0/3

!

interface Ethernet0/4

!

interface Ethernet0/5

switchport access vlan 15

!

interface Ethernet0/6

!

interface Ethernet0/7

!

passive FTP mode

DNS server-group DefaultDNS

domain default.domain.invalid

outside_access_in list extended access permit icmp any any disable log echo-reply

access extensive list ip 192.168.77.0 outside_1_cryptomap allow 255.255.255.0 192.168.1.0 255.255.255.0

access extensive list ip 192.168.77.0 inside_nat0_outbound allow 255.255.255.0 192.168.1.0 255.255.255.0

pager lines 24

asdm of logging of information

Within 1500 MTU

Outside 1500 MTU

ICMP unreachable rate-limit 1 burst-size 1

ASDM image disk0: / asdm - 524.bin

don't allow no asdm history

ARP timeout 14400

Global 1 interface (outside)

NAT (inside) 0-list of access inside_nat0_outbound

NAT (inside) 1 0.0.0.0 0.0.0.0

Access-group outside_access_in in interface outside

Timeout xlate 03:00

Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00

Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00

Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute

Enable http server

http 192.168.77.0 255.255.255.0 inside

http 192.168.1.0 255.255.255.0 inside

No snmp server location

No snmp Server contact

Server enable SNMP traps snmp authentication linkup, linkdown cold start

Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac

card crypto outside_map 1 match address outside_1_cryptomap

card crypto outside_map 1 set pfs

peer set card crypto outside_map 1 79.160.252.226

card crypto outside_map 1 set of transformation-ESP-3DES-SHA

outside_map interface card crypto outside

crypto ISAKMP allow inside

crypto ISAKMP allow outside

crypto ISAKMP policy 10

preshared authentication

3des encryption

sha hash

Group 2

life 86400

Telnet 192.168.77.0 255.255.255.0 inside

Telnet timeout 5

SSH timeout 5

Console timeout 0

VPDN group Telenor request dialout pppoe

VPDN group Telenor localname x

VPDN group Telenor ppp authentication chap

VPDN x x local store password username

dhcpd outside auto_config

!

dhcpd address 192.168.77.100 - 192.168.77.130 inside

dhcpd dns 192.168.77.1 on the inside interface

dhcpd option 6 ip 130.67.15.198 193.213.112.4 interface inside

dhcpd allow inside

!

dhcpd option 6 ip 130.67.15.198 193.213.112.4 outside interface

!

tunnel-group 79.160.252.226 type ipsec-l2l

IPSec-attributes tunnel-group 79.160.252.226

pre-shared-key *.

!

class-map inspection_default

match default-inspection-traffic

!

!

type of policy-card inspect dns preset_dns_map

parameters

message-length maximum 512

Policy-map global_policy

class inspection_default

inspect the preset_dns_map dns

inspect the ftp

inspect h323 h225

inspect the h323 ras

inspect the rsh

inspect the rtsp

inspect esmtp

inspect sqlnet

inspect the skinny

inspect sunrpc

inspect xdmcp

inspect the sip

inspect the netbios

inspect the tftp

!

global service-policy global_policy

context of prompt hostname

Cryptochecksum:x

: end

Hello

The addition of a new network to the existing VPN L2L should be a fairly simple process.

Essentially, you need to add the network of the Crypto present ACL configurations "crypto map" . You also need to configure the NAT0 configuration for it in the appropriate interfaces of the SAA. These configurations are all made on both ends of the VPN L2L connection.

Looking at your configurations above it would appear that you need to the following configurations

SITE 1
- We add the new network at the same time the crypto ACL and ACL NAT0
access extensive list ip 192.168.77.0 outside_1_cryptomap allow 255.255.255.0 192.168.20.0 255.255.255.0

access extensive list ip 192.168.77.0 inside_nat0_outbound allow 255.255.255.0 192.168.20.0 255.255.255.0

SITE 2
- We add new ACL crypto network
- We create a new NAT0 configuration for interface Vlan480 because there is no previous NAT0 configuration
outside_20_cryptomap_1 to access extended list ip 192.168.20.0 allow 255.255.255.0 192.168.77.0 255.255.255.0

Comment by VLAN480-NAT0 NAT0 for VPN access-list

access-list VLAN480-NAT0 ip 192.168.20.0 allow 255.255.255.0 192.168.77.0 255.255.255.0

NAT 0 access-list VLAN480-NAT0 (vlan480-Telefoni)

These configurations should pretty much do the trick.

Let me know if it worked

-Jouni

ASA 5505 IPSEC VPN connected but cannot access the local network

ASA: 8.2.5

ASDM: 6.4.5

LAN: 10.1.0.0/22

Pool VPN: 172.16.10.0/24

Hi, we purcahsed a new ASA 5505 and try to configure IPSEC VPN via ASDM; I simply run the wizards, installation vpnpool, split tunnelling, etc.

I can connect to the ASA using the cisco VPN client and internet works fine on the local PC, but it can not access the local network (can not impossible. ping remote desktop). I tried the same thing on our Production ASA(those have both Remote VPN and Site-to-site VPN working), the new profile, I created worked very well.

Here is my setup, wrong set up anything?

ASA Version 8.2 (5)

!

hostname asatest

domain XXX.com

activate 8Fw1QFqthX2n4uD3 encrypted password

g9NiG6oUPjkYrHNt encrypted passwd

names of

!

interface Ethernet0/0

switchport access vlan 2

!

interface Ethernet0/1

!

interface Ethernet0/2

!

interface Ethernet0/3

!

interface Ethernet0/4

!

interface Ethernet0/5

!

interface Ethernet0/6

!

interface Ethernet0/7

!

interface Vlan1

nameif inside

security-level 100

IP 10.1.1.253 255.255.252.0

!

interface Vlan2

nameif outside

security-level 0

address IP XXX.XXX.XXX.XXX 255.255.255.240

!

passive FTP mode

clock timezone PST - 8

clock summer-time recurring PDT

DNS server-group DefaultDNS

domain vff.com

vpntest_splitTunnelAcl list standard access allowed 10.1.0.0 255.255.252.0

access extensive list ip 10.1.0.0 inside_nat0_outbound allow 255.255.252.0 172.16.10.0 255.255.255.0

pager lines 24

Enable logging

timestamp of the record

logging trap warnings

asdm of logging of information

logging - the id of the device hostname

host of logging inside the 10.1.1.230

Within 1500 MTU

Outside 1500 MTU

IP local pool 172.16.10.1 - 172.16.10.254 mask 255.255.255.0 vpnpool

no failover

ICMP unreachable rate-limit 1 burst-size 1

don't allow no asdm history

ARP timeout 14400

Global 1 interface (outside)

NAT (inside) 0-list of access inside_nat0_outbound

NAT (inside) 1 0.0.0.0 0.0.0.0

Route outside 0.0.0.0 0.0.0.0 XXX.XXX.XXX.XXX 1

Timeout xlate 03:00

Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00

Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00

Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute

timeout tcp-proxy-reassembly 0:01:00

Floating conn timeout 0:00:00

dynamic-access-policy-registration DfltAccessPolicy

AAA-server protocol nt AD

AAA-server host 10.1.1.108 AD (inside)

NT-auth-domain controller 10.1.1.108

Enable http server

http 10.1.0.0 255.255.252.0 inside

No snmp server location

No snmp Server contact

Server enable SNMP traps snmp authentication linkup, linkdown cold start

Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac

Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac

Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac

Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac

Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac

Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac

Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac

Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac

Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac

Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac

life crypto ipsec security association seconds 28800

Crypto ipsec kilobytes of life - safety 4608000 association

crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs Group1 set

Crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5

outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP

outside_map interface card crypto outside

crypto ISAKMP allow outside

crypto ISAKMP policy 10

preshared authentication

3des encryption

sha hash

Group 2

life 86400

Telnet timeout 5

SSH 10.1.0.0 255.255.252.0 inside

SSH timeout 20

Console timeout 0

dhcpd outside auto_config

!

a basic threat threat detection

Statistics-list of access threat detection

no statistical threat detection tcp-interception

WebVPN

internal group vpntest strategy

Group vpntest policy attributes

value of 10.1.1.108 WINS server

Server DNS 10.1.1.108 value

Protocol-tunnel-VPN IPSec l2tp ipsec

disable the password-storage

disable the IP-comp

Re-xauth disable

disable the PFS

IPSec-udp disable

IPSec-udp-port 10000

Split-tunnel-policy tunnelspecified

value of Split-tunnel-network-list vpntest_splitTunnelAcl

value by default-domain XXX.com

disable the split-tunnel-all dns

Dungeon-client-config backup servers

the address value vpnpool pools

admin WeiepwREwT66BhE9 encrypted privilege 15 password username

username user5 encrypted password privilege 5 yIWniWfceAUz1sUb

the encrypted password privilege 3 umNHhJnO7McrLxNQ util_3 username

tunnel-group vpntest type remote access

tunnel-group vpntest General attributes

address vpnpool pool

authentication-server-group AD

authentication-server-group (inside) AD

Group Policy - by default-vpntest

band-Kingdom

vpntest group tunnel ipsec-attributes

pre-shared-key BEKey123456

NOCHECK Peer-id-validate

!

!

privilege level 3 mode exec cmd command perfmon

privilege level 3 mode exec cmd ping command

mode privileged exec command cmd level 3

logging of the privilege level 3 mode exec cmd commands

privilege level 3 exec command failover mode cmd

privilege level 3 mode exec command packet cmd - draw

privilege show import at the level 5 exec mode command

privilege level 5 see fashion exec running-config command

order of privilege show level 3 exec mode reload

privilege level 3 exec mode control fashion show

privilege see the level 3 exec firewall command mode

privilege see the level 3 exec mode command ASP.

processor mode privileged exec command to see the level 3

privilege command shell see the level 3 exec mode

privilege show level 3 exec command clock mode

privilege exec mode level 3 dns-hosts command show

privilege see the level 3 exec command access-list mode

logging of orders privilege see the level 3 exec mode

privilege, level 3 see the exec command mode vlan

privilege show level 3 exec command ip mode

privilege, level 3 see fashion exec command ipv6

privilege, level 3 see the exec command failover mode

privilege, level 3 see fashion exec command asdm

exec mode privilege see the level 3 command arp

command routing privilege see the level 3 exec mode

privilege, level 3 see fashion exec command ospf

privilege, level 3 see the exec command in aaa-server mode

AAA mode privileged exec command to see the level 3

privilege, level 3 see fashion exec command eigrp

privilege see the level 3 exec mode command crypto

privilege, level 3 see fashion exec command vpn-sessiondb

privilege level 3 exec mode command ssh show

privilege, level 3 see fashion exec command dhcpd

privilege, level 3 see the vpnclient command exec mode

privilege, level 3 see fashion exec command vpn

privilege level see the 3 blocks from exec mode command

privilege, level 3 see fashion exec command wccp

privilege see the level 3 exec command mode dynamic filters

privilege, level 3 see the exec command in webvpn mode

privilege control module see the level 3 exec mode

privilege, level 3 see fashion exec command uauth

privilege see the level 3 exec command compression mode

level 3 for the show privilege mode configure the command interface

level 3 for the show privilege mode set clock command

level 3 for the show privilege mode configure the access-list command

level 3 for the show privilege mode set up the registration of the order

level 3 for the show privilege mode configure ip command

level 3 for the show privilege mode configure command failover

level 5 mode see the privilege set up command asdm

level 3 for the show privilege mode configure arp command

level 3 for the show privilege mode configure the command routing

level 3 for the show privilege mode configure aaa-order server

level mode 3 privilege see the command configure aaa

level 3 for the show privilege mode configure command crypto

level 3 for the show privilege mode configure ssh command

level 3 for the show privilege mode configure command dhcpd

level 5 mode see the privilege set privilege to command

privilege level clear 3 mode exec command dns host

logging of the privilege clear level 3 exec mode commands

clear level 3 arp command mode privileged exec

AAA-server of privilege clear level 3 exec mode command

privilege clear level 3 exec mode command crypto

privilege clear level 3 exec command mode dynamic filters

level 3 for the privilege cmd mode configure command failover

clear level 3 privilege mode set the logging of command

privilege mode clear level 3 Configure arp command

clear level 3 privilege mode configure command crypto

clear level 3 privilege mode configure aaa-order server

context of prompt hostname

no remote anonymous reporting call

Cryptochecksum:447bbbc60fc01e9f83b32b1e0304c6b4

: end

Captures we can see packets going from the pool to the internal LAN, but we do not reply back packages.

The routing must be such that for 172.16.10.0/24 packages should reach the inside interface of the ASA.

On client machines or your internal LAN switch, you need to add route for 172.16.10.0/24 pointing to the inside interface of the ASA.

System default admin for the guest account

original title: system admin__

How to make so that the main user... (System Administrator) the main user on the page "comments"? So I don't have to ask permission to download things.

It can be done - especially because of reasons of programming and security. In fact, you really should not use the guest at all account (for the same reason - pirates too know it is there and can often enter your system through it). The best approach is to create a standard user for guests account and just leave the guest account disabled. Yes, I know that the account exists and it is not well said by Microsoft about it, but to be on these forums and see thousands of posts, I can tell you that most experts and authors of long-term response do not recommend its use at all. Most would have a fit to the idea of giving this account of administrative privileges (and thank God that you proposed is not possible). I mean really, you honestly want to give a guest (even your best friend or a parent) THAT kind of access to your system and your files? Even if it were possible, I would NEVER consider such a thing.

Again, I suggest you to disable the account invited and set up a standard account for your guests. It's much safer and not that much more work for all the world. In addition, since it implies that this is the case, I suggest that you do not use an administrator account for day-to-day activities (for security reasons - if someone hacks in there they have access to your entire system!). Set up a regular user account to use on a daily basis and use the account administrator only when necessary.

I hope this helps and even if it wasn't the answer you wanted to hear, it's the answer you needed to hear. A good firewall and security software cannot go that far (and necessary), but you must also practice good safety habits as well. I can't tell you how many people I have seen here that have been hacked or attacked by malicious software not because they had not the right software installed and running, but because of the way they have used their system (absence of passwords, wireless unsecured, leave the machine unattended without first locking or at least using a locking screen saver) ,...). And in some cases, the only way to recover was a clean install, and they lost all their programs and settngs (although most were able to record their data with our help). I really want to see you back here as one of those people.

Good luck!

Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

Photosmart c309g do not accept the code wireless access

I tried to enter the code to access with or without dashes, the printer still says that it is invalid.

I install the c309g via wireless, the router is a trendnet TEW-731BR

the printer has been installed originally as a wired unit. I'd love to convert it to a wireless solution.

The code is the code of wpa2 security. I put in the wrong code maybe? The printer says its wps is a different number, but I don't know what a wps is, nor how it is correlated to the wpa2 code.

I use win7 for the configuration of the network.

Forget the WPS. Temporarily disable the security on the router. Now try to connect without security. If successful, go back and add WPA2-AES with a password without special characters.

ASA 5505 AnyConnect 8.2 - Can't access and inside services

Hello

I have configured AnyConnect to use a subnet of 10.0.7.0/24 for its DHCP pool. I can connect to the ASA very well, but I can't access internal services on my subnet 10.0.5.0/24 which is my INNER interface vlan subnet. I configure NAT for exemption rule:

allowed to Access-list inside_nat0_outbound line 2 extended 10.0.5.0 ip 255.255.255.0 Any-Connect-Pool-10-0-7-0 object-group

AnyConnect is set to ignore all the ACL rules through the sysopt permit vpn connection.

I don't know if I'm supposed to create another path to the VPN subnet or what exactly. When I ping my VPN subnet to a client on the subnet of the INTERIOR, I see ICMP traffic flowing through the FW, but I didn't get any answer. I do not split-tunnleing and I can not connect to internet either after establishing a VPN connection.

Thanks in advance for the help.

Hello

You must ensure that the following setting is enabled

permit same-security-traffic intra-interface

You should also make sure PAT configured for your Pool of VPN Dynamics

If your current dynamic PAT for internal users would

Global 1 interface (outside)

NAT (inside) 1 10.0.5.0 255.255.255.0

Then you must add

NAT (outside) 1 10.0.7.0 255.255.255.0

Hope this helps

Remember to mark a reply as the answer if it answered your question.

Feel free to ask more if necessary

-Jouni

Cisco Asa 5505 and level 3 with remote access VPN switch

Today I had a new CISCO LAYER 3 switch... So here's my scenrio

Cisco Asa 5505

I have

Outside of the == 155.155.155.x

Inside = 192.168.7.1

Address POOL VPN = 10.10.10.1 - 10.10.10.20

3 layer switch configuration

VLAN 2

ip address of the interface = 192.168.1.1

VLAN 2

ip address of the interface = 192.168.2.1

VLAN 2

ip address of 192.168.3.1 = interface

VLAN 2

ip address of the interface = 192.168.4.1

VLAN 2

ip address of the interface = 192.168.5.1

IP Routing

So I want the customers of my remote access VPN to access all that these networks. So please can you give me a useful tip or a link to set up the rest of my trip

Thanks to you all

Al ready has responded

Sent by Cisco Support technique iPad App

DRS/HA when the guests have access to the different storage

Hello
I wonder what will happen in a scenario where all guests are in a group, but not all guests have access to the same storage (see attachment).
Is smart enough to only migrate (or start) DRS/HA a virtual machine for guests who have access to the storage, it is located on?
I understand this is probably not a supported configuration, but this is a temporary measure
Thanks for any help.

In a HA/DRS configuration, it is recommended to have shared storage. But even if you have no shared storage, you can always enable HA/DRS, but your virtual machines will not be protected HA.

Yes, the DRS is smart enough to move only those virtual machines that are located on a shared storage, in case of lack of resources. HA, too, smart enough to restart these virtual machines, on the other hosts that are on shared failure of host storage only.

SRM does not wait for the guests of the DPM enabled

Hello
We are testing our environment vsphere 5/SRM and essentially 5, everything goes very well except for wake up initiated by the SRM to the DPM active guests.
--------------------------------
The SRM 5.0 doco States:
SRM temporarily disables DPM for the cluster, and ensures that all guests there are lit before recovery begins. After the recovery or the test is completed, SRM reactive DPM for the cluster, but it hosts are found in the current state of execution while DPM is able to feed them downwards as needed.
--------------------------------
The question that we see is that SRM send indeed wake up for guests in mode standby and milestone of recovery as a success. The problem is that SRM does not wait until the guests are completely turned on before before feeding on the VMs. The day before hosts to wake the system correctly storage access newly presented no problem. The problem is that the bubbles to test network is not created on the hosts of the day before and no VMs are assigned to these hosts during the entire test.
That said, I checked the advanced settings and I cannot find a setting that will force SRM to wait for the standby hosts to be fully integrated in the cluster before you perform additional steps.
Everyone knows this behavior? Am I missing a setting somwhere? My fear is that this behavior will happen during a real failover and potentially cause problems.
Thank you for your time,
Smokey

Hello

This should not happen.

Can you please open a SR, download bundle Journal, engineers will be able to understand what is happening?

Once you open a case, display the number of SR.

Michael.

I FOUND THE SOLUTION FOR THE TX WIRELESS PROBLEM!

Hi guys,.

IM pretty happy problem because I found the solution for my tx 1219 us wireless!

First of all, my laptop started with wifi problems. Then, when I tried to start, nothing has been posted.

I read a lot of posts on forums that talking about changing the motherboard by HP.

I sent my knees to HP in Argentina - where i live - and they had sent me a budget with a «renewed» system map

I was paying, so I pretend a new.

Tired and frustrated on the HP customer service: they dosen´t recognize their mistake. They dosen´t give me GUARANTEE AND they pretend a lot of money for something refurbished!

I found a post where a guy - now away for me is 'God' - explains how to fix this problem yourself! AND a lot of positions where other guys did, and they confirm that it works!

Here's the method. Feel happy!

This post is for the repair of the range of following HP laptop: tx1000, dv2000, dv6000, dv9000, with AMD processors and graphic chips from nvidia (6150go).
Symptoms are more, wireless wireless card are running out, are repeatedly, the laptop, it does not ignite until several attempts and finally the laptop turns on but he did not have no image in the monitor, in some models, you listen to some sounds.

The cause is excessive overheating of the GPU from nvidia, which has powered up to 100 degrees or but tends to fail the welds that unite it to the mother of the card.
HP already admitted the existence of the failure in the design of the card, and extended 2-year warranty, so that if even you can demand but the desirable thing is to do, the method I describe is simple and has worked in 100% of those laptop with this problem, prefer all must do it under your own risk.

Step 1. -It is necessary to compile the necessary material: this is a 1-cent American copper currency or a currency that similar thickness now about a 1/16 of an inch, or a piece with these features, but the copper. also we will need a table lamp with a halogen centre, or the one with the normal centres but it is 150W or but case is that it heats up a lot. disipadora thermal paste of what they take microprocessors (sold at any electronics store).

step 2. -Once gathered our components, it is necessary to remove the mother card and remove the radiator so that they are exposed to the microprocessor and the nvidia chip.

Step 3. -Now, we are committed to the lamp, started to warm up a while, in my case I have tapeworm a gun to measure temperatures and saw that it was 134 degrees, once it is hot we close set, but the thing at latest, the graphics chip, but on the other hand, where all the solder points are seen We leave about 5 minutes, which were both that I gave him, no doubt, it can be less, depending on the source of heat, once that done this we have pressed with the fingers with force the graphics chip (care, it will be hot), which will be expanded by heat welding is to merge.

Step 4. -Now, we put a little disipadora in the room by both parties and we placed on the graphics chip and put the radiator and arm!

It is with the intention of wrong correct dissipation system design since the heat produced by the chip is transferred to the coin in copper.

Copper is an excellent conductor of heat and thus provide the heatsink of makes, initially was clearly a very small between the radiator and the chip and when warm itself does not transfer not warmth to any party since not thanks to the air, it can, but the copper coins made this work

Greetings

Message edited by Wendy on 30/04/2009 21:02

Please see the procedure on YouTube

http://www.YouTube.com/watch?v=musu759LsT4

Message edited by Wendy on 30/04/2009 21:02

ASA 5505 DMZ for the guest wireless access

Similar Questions

Maybe you are looking for