ASA 5505 IPS/IDS Module

Similar Questions

• How to accompany the IDS in ASA 5505 and 5520?

  Dear All;

  We have the following configuration of HW for the ASA 5505 and ASA 5520, we add the functionality of system of detection of Intrusion (IDS) to the two ASA. My question is: what are the modules required to support this function, and what is the deference between IPS and IDS, fact the same Module both the feature?

  Part number:	Description	QTY.
  ASA5505-BUN-K9	ASA 5505 appliance with SW 10 users, 8 ports, 3DES/AES	1
  CON-SNT-AS5BUNK9	SMARTNET 8X5XNBD ASA5505-BUN-K9	1
  SF-ASA5505 - 8.2 - K8	ASA 5505 Series Software v8.2	1
  CAB-AC-C5	Power supply cord Type C5 U.S.	1
  ASA5500-BA-K9	ASA 5500 license (3DES/AES) encryption	1
  ASA5505-PWR-AC	ASA 5505 power adapter	1
  ASA5505-SW-10	ASA 5505 10 user software license	1
  SSC-WHITE	ASA 5505 hood SSC of the location empty	1
  ASA-ANYCONN-CSD-K9	ASA 5500 AnyConnect Client + Cisco Security Office software	1

  Part number:	Description	QTY.
  ASA5520-BUN-K9	ASA 5520 appliance with SW HA, 4GE + 1FE, 3DES/AES	2
  CON-SNT-AS2BUNK9	SMARTNET 8X5XNBD ASA5520 w/300 VPN Prs 4GE + 1FE3DES/AES	2
  ASA5520-VPN-PL	ASA 5520 VPN over 750 IPsec User License (7.0 only)	2
  ASA-VPN-CLNT-K9	Cisco VPN Client (Windows Solaris Linux Mac) software	2
  SF - ASA - 8.2 - K8	ASA 5500 Series Software v8.2	2
  CAB - ACU	Power supply cord (UK) C13 BS 1363 2.5 m	2
  ASA-180W-PWR-AC	Power supply ASA 180W	2
  ASA5500-BA-K9	ASA 5500 license (3DES/AES) encryption	2
  ASA-ANYCONN-CSD-K9	ASA 5500 AnyConnect Client + Cisco Security Office software	2
  SSM-WHITE	ASA/IPS SSM hood of the location	2

  Thanks in advance.

  Rashed Ward.

  Okay, I was not quite correct in my first post.

  These modules - modules only available for corresponding models of ASA.

  They all can act as IPS (inline mode) or IDS ("Promiscuous" mode), depending on how you configure your policies.

  When acting as IPS, ASA redirects all traffic through the module, then all the traffic is inspected and can be dropped inline if a signature is triggered.

  When she acts as an ID, ASA a few exemplary traffic is the module for inspection, but the actual traffic is not affected by the module, as it's not inline in this case.

  In addition, these modules can be both comdination. That is part of the traffic can be inspected "inline", when some other (more sensitive) traffic can be inspected in promiscuous mode.

  To better understand, familiarize themselves with this link:

  http://www.Cisco.com/en/us/docs/security/ASA/asa84/configuration/guide/modules_ips.html

• How is used to monitor two ASA (active/stby) with modules IPS Cisco MARCH?

  Hello

  The two ASA with IPS modules are in Active mode / standby. When I try to add both the two IP (active / standby) in MARCH, the MARCH will complain of duplicate names.

  How set up in MARCH to monitor the ASA with IPS with topology standby active?

  Thank you!

  Hello

  The fundamental problem with this scenario is that you have modules able non-basculement in a tipping chassis - think of the pair of failover ASA as a device and modules IPS as two completely separate devices.

  Then, as we have already mentioned, add only the ASA elementary school. (High school will never be passing traffic in standby mode so it is not really necessary in MARCH) Then, with the first IPS module you can add it as a module of ASA or as a standalone device (MARCH doesn't care). With the second module IPS, the only option is to add it as a separate unit anyway.

  In a failover scenario of the SAA swap IP but SPI considering you'll ever messages from ASA active you will get messages from the intellectual property of these two IPS depending on whether you are in the ASA active at the time.

  Remember that you must manually reproduce all IPS configuration whenever you make a change.

  HTH

  Andrew.

• Block the specific IP traffic in ASA 5505

  Hi, we have an ASA 5505 in transparent mode and run a web service online. However, we notice a number of attempts to intrution from China and Korea and we need to block these IP traffic can anyone help please?

  config script is

  transparent firewall

  hostname xxyyASA

  Select msi14F/SlH4ZLjHH of encrypted password

  2KFQnbNIdI.2KYOU encrypted passwd

  names of

  !

  interface Ethernet0/0

  Description - the Internet-

  switchport access vlan 2

  !

  interface Ethernet0/1

  Description - connected to the LAN-

  !

  interface Ethernet0/2

  !

  interface Ethernet0/3

  Shutdown

  !

  interface Ethernet0/4

  !

  interface Ethernet0/5

  !

  interface Ethernet0/6

  !

  interface Ethernet0/7

  !

  interface Vlan1

  nameif inside

  Bridge-Group 1

  security-level 100

  !

  interface Vlan2

  nameif outside

  Bridge-Group 1

  security-level 0

  !

  interface BVI1

  Description - for management only-

  IP address xxx.yyy.zzz.uuu 255.255.xxx.yyy

  !

  passive FTP mode

  network of the WWW-SERVER-OBJ object

  Home xxx.yyy.zzz.jjj

  Description - webserver-

  WWW-SERVER-SERVICES-TCP-OBJ tcp service object-group

  Description - Services published on the WEB server-

  WWW-SERVER-SERVICES-UDP-OBJ udp service object-group

  Description - Services published on the WEB server - UDP

  Beach of port-object 221 225

  1719-1740 object-port Beach

  OUTSIDE-IN-ACL scope tcp access list deny any any eq 3306

  OUTSIDE-IN-ACL scope tcp access list deny any any eq telnet

  OUTSIDE-IN-ACL scopes allowed icmp an entire access list

  OUTSIDE-IN-ACL scopes permitted tcp access list any object WWW-SERVER-OBJ object-group WWW-SERVER-SERVICES-TCP-OBJ

  access list OUTSIDE-IN-ACL scopes permit tcp host xxx.yyy.zzz.uuu object WWW-SERVER-OBJ eq 3306

  OUTSIDE-IN-ACL scopes permitted udp access list any object WWW-SERVER-OBJ object-group WWW-SERVER-SERVICES-UDP-OBJ

  We need to block access of host say 64.15.152.208

  Just need the best step to follow and block access, without affecting the service or other host

  Thank you

  Insert a line like:

  OUTSIDE-IN-ACL scope access list deny host ip 64.15.152.208 all

  in front of your 3rd line "... to enable icmp a whole."

  If you have many of them, maybe do:

  object-group network blacklist

  host of the object-Network 64.15.152.208

  network-host another.bad.ip.here object

  object-network entire.dubious.subnet.here 255.255.255.0

  ...

  OUTSIDE-IN-ACL scope object-group BLACKLIST ip deny access list all

  If you want to take in scores of reputation on the outside, or the blacklist changes a lot, you might look into the Cisco ASA IPS module.

  Note that fleeing bad hosts help with targeted attacks, but not with denial of service; only, he moves to point decline since the application for the firewall server, without much effect on the net on your uplink bandwidth consumption.

  -Jim Leinweber, WI State Lab of hygiene

• New deployment with the ASA and AIP - SSM module

  Hi guys and girls,

  I think to deploy an ASA with IPS module AIP - SSM to my perimeter. I'm going to use / * Style Definitions * / table. MsoNormalTable {mso-style-name : « Table Normal » ; mso-tstyle-rowband-taille : 0 ; mso-tstyle-colband-taille : 0 ; mso-style-noshow:yes ; mso-style-priorité : 99 ; mso-style-qformat:yes ; mso-style-parent : » « ;" mso-rembourrage-alt : 0 à 5.4pt 0 à 5.4pt ; mso-para-margin : 0 ; mso-para-marge-bottom : .0001pt ; mso-pagination : widow-orphelin ; police-taille : 11.0pt ; famille de police : « Calibri », « sans-serif » ; mso-ascii-font-family : Calibri ; mso-ascii-theme-font : minor-latin ; mso-fareast-font-family : « Times New Roman » ; mso-fareast-theme-font : minor-fareast ; mso-hansi-font-family : Calibri ; mso-hansi-theme-font : minor-latin ; mso-bidi-font-family : « Times New Roman » ; mso-bidi-theme-font : minor-bidi ;} Cisco IPS Manager Express (IME) to monitor the IP addresses to monitor the ASA. I have no plans on deploying a device IDS.

  Question: The IME is designed to send notices to the subject of threats? What are some of the configurations in your network? (Just prick with the last question.)

  THX...

  IME is designed only for IPS monitor (whether it be IPS appliance, module AIP - SSM on ASA or other module IPS). IME is not able on the control of ASA.

  EMI can provide advice by email about events which are fires on the IPS, while the IPS itself cannot. EMI may also keep all the events triggered by the IPS, while SPI buffer is small enough, that so if you have huge demonstrations, the buffer gets replaced pretty quickly.

  Here is more information about IME, if you are interested:

  http://www.Cisco.com/en/us/products/ps9610/index.html

• Setting up a DMZ on ASA 5505

  I have a Cisco ASA 5505 that I am trying to set up a web server on a demilitarized zone. I have the DMZ interface works, but I'm not able to get access to the server connected to the DMZ interface. I have been looking for a week now on google, but have not met the installation...

  I have the following interfaces (do not use real ips)...

  WAN - 123.123.100.1

  LAN - 192.168.0.1

  Port DMZ - 172.16.8.1 - 7

  Web server - 172.16.8.2 connected on port 7

  ASA version 8.2 (5)

  I'm looking to have access to the Web from the inside via RDP server and access the external clients, more than 80. It must also communicate with a DB server located in another facility through a VPN.

  Any help would be appreciated. I was pulling my hair out on this one.

  Thank you

  Mike

  Generally speaking, inside the DMZ is allowed by default. If you have any access list applied on your inside interface you would need to add the entry to the DMZ address of the RADIUS server on tcp/3389 (rdp).

  Incoming outside traffic would need a static NAT and access list.

  Web server to a remote site via VPN would need the addresses of remote DMZ network defined in reference to the access list of the cryptomap used by the VPN. You also usually have a NAT exemption for that traffic.

  All of them are of common use cases for an ASA. If you can share a version sanitized for your running configuration, we might be able to see what's missing.

• Site to Site VPN between Cisco ASA 5505 and Sonicwall TZ170

  I'm trying to implement a VPN site-to site between our data center and office.  The data center has a Cisco ASA 5505 and the Office has a Sonicwall TZ170.  I managed to configure the two so that the vpn connects.  Each of the firewall I ping the IP Address of the internet firewall on the other side and a desktop computer I can ping the IP Address of the firewall internal datacenter but I can't carry traffic between private subnets datacenter and desktop.  Can anyone help?

  The config below has had IPs/passwords has changed.

  External Datacenter: 1.1.1.4

  External office: 1.1.1.1

  Internal data center: 10.5.0.1/24

  Internal office: 10.10.0.1/24

  : Saved
  :
  ASA Version 8.2 (1)
  !
  hostname datacenterfirewall
  mydomain.tld domain name
  activate the password encrypted
  passwd encrypted
  names of
  name 10.10.0.0 OfficeNetwork
  10.5.0.0 DatacenterNetwork name
  !
  interface Vlan1
  nameif inside
  security-level 100
  10.5.0.1 IP address 255.255.255.0
  !
  interface Vlan2
  nameif outside
  security-level 0
  1.1.1.4 IP address 255.255.255.0
  !
  interface Ethernet0/0
  switchport access vlan 2
  !
  interface Ethernet0/1
  !
  interface Ethernet0/2
  !
  interface Ethernet0/3
  !
  interface Ethernet0/4
  !
  interface Ethernet0/5
  !
  interface Ethernet0/6
  !
  interface Ethernet0/7
  !
  passive FTP mode
  clock timezone IS - 5
  clock to summer time EDT recurring
  DNS server-group DefaultDNS
  buydomains.com domain name
  permit same-security-traffic inter-interface
  permit same-security-traffic intra-interface
  inside_access_in list extended access permit icmp any one
  inside_access_in list extended access permitted tcp a whole
  inside_access_in list extended access udp allowed a whole
  inside_access_in of access allowed any ip an extended list
  outside_access_in list extended access permit icmp any one
  outside_access_in list extended access udp allowed any any eq isakmp
  IP DatacenterNetwork 255.255.255.0 OfficeNetwork 255.255.255.0 allow Access-list extended pixtosw
  pixtosw list extended access allow icmp DatacenterNetwork 255.255.255.0 OfficeNetwork 255.255.255.0
  IP OfficeNetwork 255.255.255.0 DatacenterNetwork 255.255.255.0 allow Access-list extended pixtosw
  pixtosw list extended access allow icmp OfficeNetwork 255.255.255.0 DatacenterNetwork 255.255.255.0
  outside_cryptomap_66.1 list of allowed ip extended access all OfficeNetwork 255.255.255.0
  outside_cryptomap_66.1 ip OfficeNetwork 255.255.255.0 allowed extended access list all
  outside_cryptomap_66.1 list extended access permit icmp any OfficeNetwork 255.255.255.0
  outside_cryptomap_66.1 list extended access allowed icmp OfficeNetwork 255.255.255.0 everything
  pager lines 24
  Enable logging
  asdm of logging of information
  Within 1500 MTU
  Outside 1500 MTU
  IP verify reverse path to the outside interface
  ICMP unreachable rate-limit 1 burst-size 1
  ASDM image disk0: / asdm - 623.bin
  don't allow no asdm history
  ARP timeout 14400
  NAT-control
  Global 1 interface (outside)
  NAT (inside) 1 0.0.0.0 0.0.0.0
  inside_access_in access to the interface inside group
  Access-group outside_access_in in interface outside
  Route inside 0.0.0.0 0.0.0.0 1.1.1.1 1
  Route OfficeNetwork 255.255.255.0 outside 1.1.1.1 1
  Timeout xlate 03:00
  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
  Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
  timeout tcp-proxy-reassembly 0:01:00
  dynamic-access-policy-registration DfltAccessPolicy
  Enable http server
  http 10.5.0.0 255.255.255.0 inside
  No snmp server location
  No snmp Server contact
  Server enable SNMP traps snmp authentication linkup, linkdown cold start
  Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
  Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac
  Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
  Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac
  Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac
  Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
  Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac
  Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac
  Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
  Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac
  Crypto ipsec transform-set esp-aes-256 walthamoffice, esp-sha-hmac
  life crypto ipsec security association seconds 28800
  Crypto ipsec kilobytes of life - safety 4608000 association
  Crypto dynamic-map ciscopix 1 corresponds to the address outside_cryptomap_66.1
  Crypto dynamic-map ciscopix 1 transform-set walthamoffice
  Crypto dynamic-map ciscopix 1 the value reverse-road
  map dynmaptosw 66-isakmp ipsec crypto dynamic ciscopix
  dynmaptosw interface card crypto outside
  crypto isakmp identity address
  crypto ISAKMP allow outside
  crypto ISAKMP policy 10
  preshared authentication
  3des encryption
  sha hash
  Group 2
  life 86400
  crypto ISAKMP policy 13
  preshared authentication
  aes-256 encryption
  sha hash
  Group 2
  lifetime 28800
  crypto ISAKMP policy 30
  preshared authentication
  aes-256 encryption
  sha hash
  Group 2
  life 86400
  No encryption isakmp nat-traversal
  Telnet 10.5.0.0 255.255.255.0 inside
  Telnet timeout 5
  SSH 10.5.0.0 255.255.255.0 inside
  SSH timeout 5
  Console timeout 0
  management-access inside
  dhcpd address 10.5.0.2 - 10.5.0.254 inside
  dhcpd allow inside
  !

  a basic threat threat detection
  Statistics-list of access threat detection
  no statistical threat detection tcp-interception
  NTP server 66.250.45.2 source outdoors
  NTP server 72.18.205.157 source outdoors
  NTP server 208.53.158.34 source outdoors
  WebVPN
  attributes of Group Policy DfltGrpPolicy
  VPN-idle-timeout no
  username admin password encrypted
  tunnel-group 1.1.1.1 type ipsec-l2l
  tunnel-group 1.1.1.1 ipsec-attributes
  pre-shared-key *.
  !
  !
  !
  type of policy-card inspect dns preset_dns_map
  parameters
  message-length maximum 512
  !
  context of prompt hostname
  Cryptochecksum:7f319172e5de9c0e550804a263f8e49e
  : end

  Mattew, obvious lack of education is the rule exempt from nat for your tunnel, your access list pixtosw is similar on this example, I assume that you have gone through this link, if it does not see the configs on both sides.

  Add the statement of rule sheep in asa and try again.

  NAT (inside) 0-list of access pixtosw

  http://www.Cisco.com/en/us/products/HW/vpndevc/ps2030/products_configuration_example09186a008052c9d4.shtml

  Concerning

• ASA 5505-> ASA 5520 Site - to drops frequent

  Hello

  I'm about to give up the blow this ASA 5505. Basically, what happens is to install the 5505 connects to the 5520, establishes the tunnel and all is well. In the 10 or 15 minutes, everything falls, and the VPN tunnel refuses to come back until I reload the 5505. It's BORING. This SAA is in a building that has been closed and is used for safety so that whenever this happens that I am standing in a strengthening of expletives gel.

  The 5520, messages are the following:

  3 Feb 15:28:24 asalicious.ips.k12.in.us Feb 03 15:28:42 IS: % ASA-vpn-6-713219: IP = 70.63.52.210, Queuing KEY-ACQUIRE messages are treated when SA P1 is finished.
  3 Feb 15:28:25 asalicious.ips.k12.in.us Feb 03 15:28:43 UTC: % ASA-vpn-6-713219: IP = 70.63.52.210, Queuing KEY-ACQUIRE messages are treated when SA P1 is finished.
  pleated Phase 1 detected package.  Retransmit the last packet.
  3 Feb 15:28:31 asalicious.ips.k12.in.us Feb 03 15:28:49 IS: % ASA-vpn-6-713905: IP = 70.63.52.210, P1 retransmit msg sent to the WSF MM

  -Also:

  5 IKE peers: 70.63.52.210
  Type: user role: answering machine
  Generate a new key: no State: MM_WAIT_MSG3
  6 IKE peers: 70.63.52.210
  Type: user role: answering machine
  Generate a new key: no State: MM_WAIT_MSG3

  If anyone has any ideas that would be great. The work of the "thing" for literally 20 minutes and everything is peachy - then DEATH!

  The two code 8.2 current to identical execution.

  Thank you

  Tim

  Hi Tim,.

  Sorry for the pain, VPN drops are caused by several things, hence the request for the config because we need to isolate it, for example, incompatibility of configuration could be one of the reasons that the SAs could be negotiated with the tunnels that are not quite defined for this particular tunnel. As well the drop could occur due to the DPD lost on the path or because some IP renewal.

  Regarding the config I need to see the relevant sides ACL Crypto, exempt NAT and the relevant definitions of Crypto rules (in this part, see if you can post all of those included)

  Thank you

  Ivan

• Access to the ASA 5515 IPS administration

  Hello!

  I can not access the ASA IPS module.

  I try to ASDM. Configuration-> IPS. I type user name and password, see following message: "error connecting to the sensor. Error loading sensor.

  Could you please help me fix my config?

  I have the topology of the network like this

  http://www.Cisco.com/image/gif/paws/113690/IPS-config-mod-01.gif

  My config

  KR - ASA # sh run concert int 0/5

  !

  interface GigabitEthernet0/5

  nameif inside

  security-level 100

  IP 172.33.1.253 255.255.255.0 watch 172.33.1.254

  !

  interface Management0/0

  management only

  No nameif

  security-level 0

  no ip address

  !

  KR - ASA # sh details ips module

  App name: IPS

  App status. : to the top

  App Status / / Desc: Normal operation

  App version: 4,0000 E4

  Flight status data: to the top

  Status: to the top

  License: IPS active Module perpetual

  Mgmt IP addr: 172.33.1.251

  MGMT network mask: 255.255.255.0

  Mgmt gateway: 172.33.1.253

  MGMT access list: 172.33.1.0/24

  MGMT access list: 172.34.1.0/24

  Web to MGMT ports: 443

  Mgmt TLS enabled: true

  !

  KR - ASA # ping 172.33.1.251

  Type to abort escape sequence.

  Send 5, echoes ICMP 100 bytes to 172.33.1.251, wait time is 2 seconds:

  !!!!!

  Success rate is 100 per cent (5/5), round-trip min/avg/max = 10/10/10 ms

  !

  permit same-security-traffic inter-interface

  permit same-security-traffic intra-interface

  !

  Thank you!

  Hi Vladimir,.

  Yups, this is an issue that is seen. Downgrade of Java should solve the problem. If this is not the case, turn on java debugging logs and paste those here:

  Go to control panel-> java right click-> Open-> Advanced-> check all the boxes that appear under debugging and click the radio button to see the console

  Rerun the IDM in browser and collect data in the java console window and paste it here.

  -

  Kind regards

  Sourav Kakkar

• Client VPN und Cisco asa 5505 tunnel work but no traffic

  Hi all

  I am new to this forum and Don t have a lot of experience with Cisco, so I hope I can get help from specialists.

  I have the following problem:

  I installed und konfigured ASA 5505 for use with vpn client. I would like to access the local network from outside through vpn.

  To test, I installed ASA 5505 with ADSL (pppoe) and tried to give access to the internal network.

  Of course whenever I have recive the supplier's different IP address, but it didn't is not a problem reconfigure in the vpn client.

  After the connection is established (vpn tunnel work) I can see my external network packets. But I Don t have any connection to the internal network.

  I erased my setup yesterday and tried to reconfigure ASA again. I didn t tested yesterday, because it was too late. And I know that I Don t have the authorization rule at present by the ACL. But I think I'm having the same problem again. (tunnel but no traffic).

  What I did wrong. Could someone let me know what I have to do today.

  With hope for your help Dimitri.

  ASA configuration after reset and basic configuration: works to the Internet from within the course.

  : Saved

  : Written by enable_15 to the CEDT 20:29:18.909 Sunday, August 29, 2010

  !

  ASA Version 8.2 (2)

  !

  ciscoasa hostname

  activate 2KFQnbNIdI.2KYOU encrypted password

  2KFQnbNIdI.2KYOU encrypted passwd

  names of

  !

  interface Vlan1

  nameif inside

  security-level 100

  IP 192.168.1.1 255.255.255.0

  !

  interface Vlan2

  nameif outside

  security-level 0

  PPPoE client vpdn group home

  IP address pppoe setroute

  !

  interface Ethernet0/0

  switchport access vlan 2

  !

  interface Ethernet0/1

  !

  interface Ethernet0/2

  !

  interface Ethernet0/3

  !

  interface Ethernet0/4

  !

  interface Ethernet0/5

  !

  interface Ethernet0/6

  !

  interface Ethernet0/7

  !

  boot system Disk0: / asa822 - k8.bin

  passive FTP mode

  clock timezone THATS 1

  clock to summer time CEDT recurring last Sun Mar 02:00 last Sun Oct 03:00

  DNS domain-lookup outside

  DNS server-group DefaultDNS

  Server name 194.25.0.60

  Server name 194.25.0.68

  DM_INLINE_TCP_1 tcp service object-group

  port-object eq www

  EQ object of the https port

  inside_access_in list extended access permitted udp 192.168.1.0 255.255.255.0 no matter what eq field open a debug session

  inside_access_in list extended access permitted tcp 192.168.1.0 255.255.255.0 any object-group DM_INLINE_TCP_1 open a debug session

  inside_access_in list extended access deny ip any any debug log

  inside_nat0_outbound to access ip 192.168.1.0 scope list allow 255.255.255.0 192.168.0.0 255.255.0.0

  permit inside_nat0_outbound to access extended list ip 192.168.10.0 255.255.255.0 192.168.10.0 255.255.255.128

  homegroup_splitTunnelAcl list standard access allowed 192.168.10.0 255.255.255.0

  pager lines 24

  Enable logging

  asdm of logging of information

  Outside 1500 MTU

  Within 1500 MTU

  IP local pool homepool 192.168.10.1 - 192.168.10.100 mask 255.255.255.0

  ICMP unreachable rate-limit 1 burst-size 1

  ASDM image disk0: / asdm-625 - 53.bin

  ASDM location 192.168.0.0 255.255.0.0 inside

  ASDM location 192.168.10.0 255.255.255.0 inside

  don't allow no asdm history

  ARP timeout 14400

  Global 1 interface (outside)

  NAT (inside) 0-list of access inside_nat0_outbound

  NAT (inside) 1 0.0.0.0 0.0.0.0

  inside_access_in access to the interface inside group

  Timeout xlate 03:00

  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00

  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00

  Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute

  timeout tcp-proxy-reassembly 0:01:00

  dynamic-access-policy-registration DfltAccessPolicy

  Enable http server

  http 192.168.1.0 255.255.255.0 inside

  No snmp server location

  No snmp Server contact

  Server enable SNMP traps snmp authentication linkup, linkdown cold start

  Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac

  Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac

  Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac

  Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac

  Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac

  Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac

  Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac

  Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac

  Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac

  Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac

  life crypto ipsec security association seconds 28800

  Crypto ipsec kilobytes of life - safety 4608000 association

  crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs Group1 set

  Crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5

  outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP

  outside_map interface card crypto outside

  crypto ISAKMP allow outside

  crypto ISAKMP policy 10

  preshared authentication

  3des encryption

  sha hash

  Group 2

  life 86400

  Telnet timeout 5

  SSH timeout 5

  Console timeout 0

  VPDN group home request dialout pppoe

  VPDN group House localname 04152886790

  VPDN group House ppp authentication PAP

  VPDN username 04152886790 password 1

  dhcpd outside auto_config

  !

  dhcpd address 192.168.1.5 - 192.168.1.36 inside

  dhcpd allow inside

  !

  a basic threat threat detection

  Statistics-list of access threat detection

  no statistical threat detection tcp-interception

  TFTP server 192.168.1.5 inside c:/tftp-root

  WebVPN

  Group Policy inner residential group

  attributes of the strategy of group home group

  value of 192.168.1.1 DNS server

  Protocol-tunnel-VPN IPSec

  Split-tunnel-policy tunnelspecified

  value of Split-tunnel-network-list homegroup_splitTunnelAcl

  username user01 encrypted password privilege 0 v5P40l1UGvtJa7Nn

  user01 username attributes

  VPN-strategy group home group

  tunnel-group home group type remote access

  attributes global-tunnel-group home group

  address homepool pool

  Group Policy - by default-homegroup

  tunnel-group group residential ipsec-attributes

  pre-shared-key ciscotest

  !

  class-map inspection_default

  match default-inspection-traffic

  !

  !

  type of policy-card inspect dns preset_dns_map

  parameters

  maximum message length automatic of customer

  message-length maximum 512

  Policy-map global_policy

  class inspection_default

  inspect the preset_dns_map dns

  inspect the ftp

  inspect h323 h225

  inspect the h323 ras

  inspect the rsh

  inspect the rtsp

  inspect esmtp

  inspect sqlnet

  inspect the skinny

  inspect sunrpc

  inspect xdmcp

  inspect the sip

  inspect the netbios

  inspect the tftp

  Review the ip options

  !

  global service-policy global_policy

  context of prompt hostname

  Cryptochecksum:930e6cddf25838e47ef9633dc2f07acb

  : end

  Hello

  Normally, you want a static public IP address on the ASA to allow it to receive connections from VPN clients (avoid to change the IP address all the time).

  If you connect via VPN, check the following:

  1. the tunnel is established:

  HS cry isa his

  Must say QM_IDLE or MM_ACTIVE

  2 traffic is flowing (encrypted/decrypted):

  HS cry ips its

  3. Enter the command:

  management-access inside

  And check if you can PING the inside ASA VPN client IP.

  4. check that the default gateway for the LAN internal ASA within intellectual property (or there is a road to the ASA to send traffic to the VPN clients).

  Federico.

• ASA 5505 IPSEC VPN connected but cannot access the local network

  ASA: 8.2.5

  ASDM: 6.4.5

  LAN: 10.1.0.0/22

  Pool VPN: 172.16.10.0/24

  Hi, we purcahsed a new ASA 5505 and try to configure IPSEC VPN via ASDM; I simply run the wizards, installation vpnpool, split tunnelling, etc.

  I can connect to the ASA using the cisco VPN client and internet works fine on the local PC, but it can not access the local network (can not impossible. ping remote desktop). I tried the same thing on our Production ASA(those have both Remote VPN and Site-to-site VPN working), the new profile, I created worked very well.

  Here is my setup, wrong set up anything?

  ASA Version 8.2 (5)

  !

  hostname asatest

  domain XXX.com

  activate 8Fw1QFqthX2n4uD3 encrypted password

  g9NiG6oUPjkYrHNt encrypted passwd

  names of

  !

  interface Ethernet0/0

  switchport access vlan 2

  !

  interface Ethernet0/1

  !

  interface Ethernet0/2

  !

  interface Ethernet0/3

  !

  interface Ethernet0/4

  !

  interface Ethernet0/5

  !

  interface Ethernet0/6

  !

  interface Ethernet0/7

  !

  interface Vlan1

  nameif inside

  security-level 100

  IP 10.1.1.253 255.255.252.0

  !

  interface Vlan2

  nameif outside

  security-level 0

  address IP XXX.XXX.XXX.XXX 255.255.255.240

  !

  passive FTP mode

  clock timezone PST - 8

  clock summer-time recurring PDT

  DNS server-group DefaultDNS

  domain vff.com

  vpntest_splitTunnelAcl list standard access allowed 10.1.0.0 255.255.252.0

  access extensive list ip 10.1.0.0 inside_nat0_outbound allow 255.255.252.0 172.16.10.0 255.255.255.0

  pager lines 24

  Enable logging

  timestamp of the record

  logging trap warnings

  asdm of logging of information

  logging - the id of the device hostname

  host of logging inside the 10.1.1.230

  Within 1500 MTU

  Outside 1500 MTU

  IP local pool 172.16.10.1 - 172.16.10.254 mask 255.255.255.0 vpnpool

  no failover

  ICMP unreachable rate-limit 1 burst-size 1

  don't allow no asdm history

  ARP timeout 14400

  Global 1 interface (outside)

  NAT (inside) 0-list of access inside_nat0_outbound

  NAT (inside) 1 0.0.0.0 0.0.0.0

  Route outside 0.0.0.0 0.0.0.0 XXX.XXX.XXX.XXX 1

  Timeout xlate 03:00

  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00

  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00

  Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute

  timeout tcp-proxy-reassembly 0:01:00

  Floating conn timeout 0:00:00

  dynamic-access-policy-registration DfltAccessPolicy

  AAA-server protocol nt AD

  AAA-server host 10.1.1.108 AD (inside)

  NT-auth-domain controller 10.1.1.108

  Enable http server

  http 10.1.0.0 255.255.252.0 inside

  No snmp server location

  No snmp Server contact

  Server enable SNMP traps snmp authentication linkup, linkdown cold start

  Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac

  Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac

  Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac

  Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac

  Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac

  Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac

  Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac

  Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac

  Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac

  Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac

  life crypto ipsec security association seconds 28800

  Crypto ipsec kilobytes of life - safety 4608000 association

  crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs Group1 set

  Crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5

  outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP

  outside_map interface card crypto outside

  crypto ISAKMP allow outside

  crypto ISAKMP policy 10

  preshared authentication

  3des encryption

  sha hash

  Group 2

  life 86400

  Telnet timeout 5

  SSH 10.1.0.0 255.255.252.0 inside

  SSH timeout 20

  Console timeout 0

  dhcpd outside auto_config

  !

  a basic threat threat detection

  Statistics-list of access threat detection

  no statistical threat detection tcp-interception

  WebVPN

  internal group vpntest strategy

  Group vpntest policy attributes

  value of 10.1.1.108 WINS server

  Server DNS 10.1.1.108 value

  Protocol-tunnel-VPN IPSec l2tp ipsec

  disable the password-storage

  disable the IP-comp

  Re-xauth disable

  disable the PFS

  IPSec-udp disable

  IPSec-udp-port 10000

  Split-tunnel-policy tunnelspecified

  value of Split-tunnel-network-list vpntest_splitTunnelAcl

  value by default-domain XXX.com

  disable the split-tunnel-all dns

  Dungeon-client-config backup servers

  the address value vpnpool pools

  admin WeiepwREwT66BhE9 encrypted privilege 15 password username

  username user5 encrypted password privilege 5 yIWniWfceAUz1sUb

  the encrypted password privilege 3 umNHhJnO7McrLxNQ util_3 username

  tunnel-group vpntest type remote access

  tunnel-group vpntest General attributes

  address vpnpool pool

  authentication-server-group AD

  authentication-server-group (inside) AD

  Group Policy - by default-vpntest

  band-Kingdom

  vpntest group tunnel ipsec-attributes

  pre-shared-key BEKey123456

  NOCHECK Peer-id-validate

  !

  !

  privilege level 3 mode exec cmd command perfmon

  privilege level 3 mode exec cmd ping command

  mode privileged exec command cmd level 3

  logging of the privilege level 3 mode exec cmd commands

  privilege level 3 exec command failover mode cmd

  privilege level 3 mode exec command packet cmd - draw

  privilege show import at the level 5 exec mode command

  privilege level 5 see fashion exec running-config command

  order of privilege show level 3 exec mode reload

  privilege level 3 exec mode control fashion show

  privilege see the level 3 exec firewall command mode

  privilege see the level 3 exec mode command ASP.

  processor mode privileged exec command to see the level 3

  privilege command shell see the level 3 exec mode

  privilege show level 3 exec command clock mode

  privilege exec mode level 3 dns-hosts command show

  privilege see the level 3 exec command access-list mode

  logging of orders privilege see the level 3 exec mode

  privilege, level 3 see the exec command mode vlan

  privilege show level 3 exec command ip mode

  privilege, level 3 see fashion exec command ipv6

  privilege, level 3 see the exec command failover mode

  privilege, level 3 see fashion exec command asdm

  exec mode privilege see the level 3 command arp

  command routing privilege see the level 3 exec mode

  privilege, level 3 see fashion exec command ospf

  privilege, level 3 see the exec command in aaa-server mode

  AAA mode privileged exec command to see the level 3

  privilege, level 3 see fashion exec command eigrp

  privilege see the level 3 exec mode command crypto

  privilege, level 3 see fashion exec command vpn-sessiondb

  privilege level 3 exec mode command ssh show

  privilege, level 3 see fashion exec command dhcpd

  privilege, level 3 see the vpnclient command exec mode

  privilege, level 3 see fashion exec command vpn

  privilege level see the 3 blocks from exec mode command

  privilege, level 3 see fashion exec command wccp

  privilege see the level 3 exec command mode dynamic filters

  privilege, level 3 see the exec command in webvpn mode

  privilege control module see the level 3 exec mode

  privilege, level 3 see fashion exec command uauth

  privilege see the level 3 exec command compression mode

  level 3 for the show privilege mode configure the command interface

  level 3 for the show privilege mode set clock command

  level 3 for the show privilege mode configure the access-list command

  level 3 for the show privilege mode set up the registration of the order

  level 3 for the show privilege mode configure ip command

  level 3 for the show privilege mode configure command failover

  level 5 mode see the privilege set up command asdm

  level 3 for the show privilege mode configure arp command

  level 3 for the show privilege mode configure the command routing

  level 3 for the show privilege mode configure aaa-order server

  level mode 3 privilege see the command configure aaa

  level 3 for the show privilege mode configure command crypto

  level 3 for the show privilege mode configure ssh command

  level 3 for the show privilege mode configure command dhcpd

  level 5 mode see the privilege set privilege to command

  privilege level clear 3 mode exec command dns host

  logging of the privilege clear level 3 exec mode commands

  clear level 3 arp command mode privileged exec

  AAA-server of privilege clear level 3 exec mode command

  privilege clear level 3 exec mode command crypto

  privilege clear level 3 exec command mode dynamic filters

  level 3 for the privilege cmd mode configure command failover

  clear level 3 privilege mode set the logging of command

  privilege mode clear level 3 Configure arp command

  clear level 3 privilege mode configure command crypto

  clear level 3 privilege mode configure aaa-order server

  context of prompt hostname

  no remote anonymous reporting call

  Cryptochecksum:447bbbc60fc01e9f83b32b1e0304c6b4

  : end

  Captures we can see packets going from the pool to the internal LAN, but we do not reply back packages.

  The routing must be such that for 172.16.10.0/24 packages should reach the inside interface of the ASA.

  On client machines or your internal LAN switch, you need to add route for 172.16.10.0/24 pointing to the inside interface of the ASA.

• ASA 5505 site-site does not

  Hi all

  I'm having problems to set up a VPN site-to-site simple between two new ASA 5505. I tried several times with the ASDM entry manual configuration tool or by using the wizard, reset each time at the factory does not by default, but the tunnel.

  I followed it it down to the following lines at the reception:

  May 11 16:42:53 [IKEv1]: Group = 1.1.1.2, IP = 1.1.1.2, PHASE 1 COMPLETED
  
      May 11 16:42:53 [IKEv1]: IP = 1.1.1.2, Keep-alive type for this connection: DPD
  
      May 11 16:42:53 [IKEv1 DEBUG]: Group = 1.1.1.2, IP = 1.1.1.2, Starting P1 rekey timer: 73440 seconds.
  
      May 11 16:42:53 [IKEv1 DECODE]: IP = 1.1.1.2, IKE Responder starting QM: msg id = 693161c8
  
      May 11 16:42:53 [IKEv1]: IP = 1.1.1.2, IKE_DECODE RECEIVED Message (msgid=693161c8) with payloads : HDR + HASH (8) + SA (1) + NONCE (10) + ID (5) + ID (5) + NOTIFY (11) + NONE (0) total length : 192
  
      May 11 16:42:53 [IKEv1 DEBUG]: Group = 1.1.1.2, IP = 1.1.1.2, processing hash payload
  
      May 11 16:42:53 [IKEv1 DEBUG]: Group = 1.1.1.2, IP = 1.1.1.2, processing SA payload
  
      May 11 16:42:53 [IKEv1 DEBUG]: Group = 1.1.1.2, IP = 1.1.1.2, processing nonce payload
  
      May 11 16:42:53 [IKEv1 DEBUG]: Group = 1.1.1.2, IP = 1.1.1.2, processing ID payload
  
      May 11 16:42:53 [IKEv1 DECODE]: Group = 1.1.1.2, IP = 1.1.1.2, ID_IPV4_ADDR ID received
  
      1.1.1.2
  
      May 11 16:42:53 [IKEv1]: Group = 1.1.1.2, IP = 1.1.1.2, Received remote Proxy Host data in ID Payload:  Address 1.1.1.2, Protocol 0, Port 0
  
      May 11 16:42:53 [IKEv1 DEBUG]: Group = 1.1.1.2, IP = 1.1.1.2, processing ID payload
  
      May 11 16:42:53 [IKEv1 DECODE]: Group = 1.1.1.2, IP = 1.1.1.2, ID_IPV4_ADDR ID received
  
      1.1.1.1
  
      May 11 16:42:53 [IKEv1]: Group = 1.1.1.2, IP = 1.1.1.2, Received local Proxy Host data in ID Payload:  Address 1.1.1.1, Protocol 0, Port 0
  
      May 11 16:42:53 [IKEv1 DEBUG]: Group = 1.1.1.2, IP = 1.1.1.2, processing notify payload
  
      May 11 16:42:53 [IKEv1]: Group = 1.1.1.2, IP = 1.1.1.2, QM IsRekeyed old sa not found by addr
  
      May 11 16:42:53 [IKEv1]: Group = 1.1.1.2, IP = 1.1.1.2, Static Crypto Map check, checking map = outside_map, seq = 1...
  
      May 11 16:42:53 [IKEv1]: Group = 1.1.1.2, IP = 1.1.1.2, Static Crypto Map check, map = outside_map, seq = 1, ACL does not match proxy IDs src:1.1.1.2 dst:1.1.1.1
  
      May 11 16:42:53 [IKEv1]: Group = 1.1.1.2, IP = 1.1.1.2, Rejecting IPSec tunnel: no matching crypto map entry for remote proxy 1.1.1.2/255.255.255.255/0/0 local proxy 1.1.1.1/255.255.255.255/0/0 on interface outside
  

  ´

  Looks to me to the remote proxy host and proxy localhost data outside IP instead of subnets (10.0.0.0/24 and 192.168.0.0/24)... How can I fix?

  Hello

  Him debugs watch ASA's answering machine, so the other ASA is the initiator.

  It seems that you have configured the initiator mode only come

  Example:

  crypto map OUTSIDE_map 20 set type of connection are created only...

  If you have that, it attempts to establish the phase 2 its between the ip address of (public) au first, then between the configured ACL...

  If you are only created, please remove it.

• Modul PIO este programat lent asa ca doresc his modul DMA pentru o your performance may dezactivez buna.

  Modul PIO este programat lent asa ca doresc his modul DMA pentru o your performance may dezactivez buna.

  Hello

  See this page to select your language:

  http://support.Microsoft.com/common/international.aspx

  ====================================

  Or sorry that it is area English.

  On the top of this page for answers click v (English) in the United States and set on your tongue.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Internet VERY slow connection on SD2008 connected to ASA 5505

  I recently bought a SD2008 (2008/11/28) to replace an older Linksys 10/100 switch for my home network. This switch connects to an ASA 5505 to go to the internet. I have improved since most of my pc have 10/100/1000 and the new NAS I purchased also connects to 1000 so I wanted to speed internally.

  The cries of network domestic now

  BUT...

  Get out to the internet has now slowed to crawl of a lily "slowski". I used to get 16-18Mbps using the 10/100 switch. Now, I'm lucky to get 1 MB/s dl speed.

  Any suggestions would be greatly appreciated.

  Too bad. I found the answer on a completely different thread that actually worked. I've linked the SD2008 to the ASA 5505 with a crossover cable, set the port speed/duplex AUTO/AUTO, restarted the ASA, and everything was back to normal.

  So much for the detection of cut MDI/MDI-X auto...

  Hope this helps someone else.

• How to configure ASDM Cisco ASA 5505

  I have a Cisco ASA 5505 firewall, and currently it is a command-line firewall. I want to configure ASDM so that I can use it as a Web based GUI interface.

  I don't really know what to do. Can someone help me please how I can configure ASDM on my firewall.

  Kind regards

  Naushad Khan

  Hi Naushad,

  First of all, must load the image ASSDM on SAA and then use the command:

  ASDM image dosk0: / asdm645.bin (if the image name is asdm645.bin)

  then:

  Enable http server

  http 10.0.0.0 255.0.0.0 inside (if your machine is 10.0.0.0 subnet behind inside the inetrafce)

  Go to the machine, open a browser and type:

  https://

  It will open the GUI.

  Thank you

  Varun

  Please evaluate the useful messages.