ASA IPS 5525

Similar Questions

• For ASA IPS modules

  Hello

  I would ask you to help learn p/n for the IPS/IDS modules in:

  -ASA 5510

  -ASA 5515 X

  I would like to buy our dealer, but he asks that no part numbers, that he can't find them...

  I know that for ASA5510 was AIP-SSM-10, but it currently is EOS. ASA 5515 X has software module, but I can't find this p/n.

  Concerning

  Hi Michal,

  IPS-ASA5515-SSP

  SSP ASA IPS 5515-X license

  SF-ASAIPS64 - 7.1 - K9

  ASA software IPS 5500-X 7.1 for IPS SSP

  You can always check through "https://apps.cisco.com/Commerce/home".

  It may be useful

  G1

• ASA IPS Signature unsuccessfully URL

  I want to update the signatures of ASA IPS by proxy. What are the destination URL I need to allow my proxy?

  I think www.cisco.com and dl.cisco.com should cover. The first has the metadata and the second is the source of the real signature files.

  Those are the two sites whose certificates in Cisco Security Manager, you must accept during the installation for the IPS signature updates.

• IPS Signature DataBase - ASA IPS/IOS IPS/IPS 42xx/AIP-SSM

  Hello

  Can someone briefly tell me the details of database signature (number of Signature) among the following devices

  --> ASA IPS/IOS IPS/IPS 42xx/AIP-SSM.

  Thank you

  IPS on ASA/PIX = signatures only 50 or so common

  Module AIP - SSM is same signatures as the Cisco 4200 series sensors. Few minor differences exist (such as signature support IPv6 etc.)

  Please rate if useful.

  Concerning

  Farrukh

• How to configure ASA IPS, which is connected to the Internet

  Hello guys,.

  I am a beginner in the Concept ASA IPS and that my company HAS an ASA 5520.

  Currently, ASA has been connected to the router connected ISP and internet acting as a firewall to control the traffic which

  is integrated with Websense URL filtering.

  Can you please let me know what all should we expected to configure IPS in this scenario, and what is the IPS feature.

  What is the main function of the IPS?

  Grateful to your messages.

  Kind regards

  KA.

  KA;

  The main function of the AIP - SSM in your ASA 5520 is to perform deep inspection packet and signature matching to detect traffic potential of achievement within your network.  If this traffic is detected, the AIP - SSM denying traffic to cross your ASA.  Here is a link to a brief overview of the product:

  http://www.Cisco.com/go/aipssm

  First, you must configure the ASA to divert traffic to the AIP - SSM for inspection, it is shown here:

  http://www.Cisco.com/en/us/docs/security/IPS/7.0/Configuration/Guide/CLI/cli_ssm.html

  So, you want to make sure that background basket interface (GigabitEthernet0/1) is added to a virtual sensor on the AIP - SSM for allow the inspections to occur.

  You want to make sure that the signature on the AIP - SSM definitions are up-to-date.  This ensures the most accurate protection from the perspective of the AIP - SSM.  This will require an active license be installed on the AIP - SSM.

  Then, you most likely want to monitor events generated by the AIP - SSM.  To do this, Cisco offers a free entry-level called IPS Manager Express (IME) solution.  You can learn more and download IME here:

  http://www.Cisco.com/go/IME

  You will want to monitor EMI to learn that the potential risks of security in network traffic crossing your infrastructure.  When you experience events for which you would like to understand better, you can site IntelliShield visist Cisco for further investigation:

  http://www.Cisco.com/security

  Details here, can also be extended within the IME event view.

  Use of an IPS will be a continuous monitor and learn phase in order to ensure that you are aware of traffic expected and unexpected, and that the appropriate response can be applied.  This is something which is different in each environment, so it is not a simple white paper on how to perform these actions.

  Scott

• ASA IPS Test

  If my ASA IPS is in promiscous mode, I can demonstrate block/fall of traffic for any signature?

  I'm sure mode inline, it is possible, but is it possible with promiscous mode because in this mode, the traffic is just duplicated and sent to IPS.

  Clarify the inability of the promiscuous mode to shunt - I don't think it's correct; the two inline and

  modes of promiscuity WILL block offending traffic.

  Cisco has been very explicit in their documentation to describe the mechanics of how promiscuous mode circuit; specifically it will block traffic using the dynamic ACL, but the time is perhaps NOT as robust as the online mode. What they fail to describe, this is exactly how the ACL deny are inserted in the ASA running config. Here, I confess that I need better clarification of Cisco.

  That means some of the traffic will pass before the dynamic ACL is set up, therefore they recommend always online mode that puts the ASA in a locked mode so to speak of the software world where no traffic passes until the SSM returns it to the ASA for the transfer.

• Logging in on a 5525 ASA IPS module

  Hi all

  Quick question here. I have a new ASA 5525 - X with IPS module.

  The PPE must be configured as an ID and told me that without fire view management controller, we can apply a license.

  I have also told me that with the 5525, we cannot install log in module to install the licenses. Please can someone confirm if I can install the licenses for the module? If so, how can I connect to the IDS to implement? Is this possible at all?

  Kind regards

  Riou

  That you listed is the legacy model, which is the end of the sale April 26, 2015. See this notice.

  They have their own Start Guide quick here.

  For these former IPS modules, you do not have licenses. Instead, your Smartnet must be the right kind of contract that includes coverage of subscription for the IPS signature updates.

  Legacy devices management IPS is via ASDM/IDM or, for slightly better visibility, through IPS Manager Express (IME). (There is also the option of Cisco Security Manager for the largest deployments).

  Signature update and software updates for older IPS modules can be done manually or automatically (assuming that you have a valid support contract, which includes the right of the subscription). Instructions for that are here.

• ASA ips feature

  I want to ask you what the works of IPS on ASAs functionality.

  There all the signatures, or it is limited?

  Perfect me if Iam wrong if I say that I needed module AIM for ips work on the asa. If Iam right, so why AIM has only 1 ethernet interface. This means that I am not follow 1 vlan?

  Thank you very much.

  The ASA-SSM-AIP-10 or ASA-SSM-AIP-20 according to the ASA modules is required for full monitoring of IPS features. The IPS on the MSS software is the same as for devices and other modules IPS. It uses the same software and signature updates. (Except for the image of the main system which has a few extra things to allow installation on the SSM)

  Without the ASA-SSM-AIP, the Software ASA itself has a set of very limited signatures that can be monitored. The signatures set is the same as in the previous version of the Pix Firewall.

  As for the single port on the ASA - SSM. This port is not a monitoring port. The port is the port command and control and has an IP address so that you can telnet, ssh or web browse to the sensor, so you can manage. The real follow-up is done on an internal interface connected inside firewall basket. The ASA can be configured through its policy to send packets through the SSM for the analysis of the IPS. Politics on the SAA can be configured for the IPS to monitor packets histocompatibility or inline.

  The SAA can be configured to send all or part of the packets through the firewall to monitor by the IPS of code that runs on the MSS.

  Since the external port is not a monitoring port that DFS may not be configured to control packets that do not go through the ASA. Packets must pass through the ASA ASA copy these packages through internal backplane to the SSM for analysis.

• License FireSIGHT - ASA IPS

  Hello

  I currently installs a virtual appliance of FireSIGHT to manage installed with fire services ASA 2.

  My Defense Center is an appropriate license, using the key PAK I got.

  I bought 2 IPS for two of the ASA subscription licenses.

  I have configured the Manager on both devices of sourcefire and added to the centre of defence.

  Now, my problem is: I can't attribute any IPS policy because there seems to be no licenses installed on the domain controller to be applied to devices...

  My question is: what I have to buy additional licenses for the domain controller for the IPS features (Protection) or do I missed something here? :-)

  Thank you very much

  Kind regards

  Hello

  As Marvin commented, you will have a license CTRL "ASA5525-CTRL-ICA" accompanying the device through a certificate of claim. On the certificate, you should see a number PAK and steps to save to get the license. Please follow these.

  If you have purchased a = L - ASA5525 - TA - LIC, then that gives you the right to obtain updates to signature for CONTROL-PROTECT features. There is no PAK or license for this PID.

  -DD

• The ASA IPS configuration

  Hello

  I have a question about the steps for using on IPS on ASA - all using a NAT addresses or configuration of access list for interesting traffic, that I have to use really. Specifically, NAT and the list of access or access and NAT?

  Keep the ACL extended near the source and the REAL IP address. NAT occurs within the ASA, then you're dealing with external systems.

  If you have 6 or 14 addresses external, public IP by your ISP, you can NAT... otherwise, you're stuck with PAT.

  For entrants to the outside: use the real, REAL public IP addresses have been assigned by your service provider in order to allow certain incoming traffic. It could be access list 100 or a list named more extensive access, such as 'inbound-outside '.

  For entrants inside the interface: use internal IP address private plan [192.168.x.x, 172.16.x.x - 172.31.255, 10.0.0.0] with appropriate subnet mask to allow traffic from the inside to the outside for your users. Most of the people open the "permit ip any any" here, but I prefer to limit the internal address, specific private only. It could be access list 102 or a named example lsit access 'inbound_inside '.

  Traffic, which is not "allowed" will be implicitly denied.

• Cisco ASA IPS with enforcement

  Hi all

  I don't know if this is the best place to connect to this application, because it comes to ASA and convenient best IPS.

  In any case, I was wondering what the best approach is to integrate a Cisco IPS GOAL module in an existing configuration of Cisco ASA, which uses the default application in the world control - i.e.

  ---------------------------

  Policy-map global_policy

  class inspection_default

  inspect the preset_dns_map dns

  inspect the ftp

  etc etc.

  global service-policy global_policy

  ---------------------------

  I was keen to inspect all traffic that was OK coming from our Web-based interface in our environment, while I was trying to do something like:

  ---------------------------

  class-map ips

  corresponds to the list of internet access

  !

  ips policy-map

  class ips

  IPS inline fail-closed

  !

  global service-policy global_policy

  service-policy ips outside interface

  ---------------------------

  This configuration would allow inspection of the demand for traffic going from inside to outside, but to redirect traffic from outside within the IPS?

  Thank you

  As for the configuration. It should inspect traffic in both directions as apply you it globally, and the map-IPS policy, it would redirect internet traffic to the inside network.

• In ASA IPS module allows you to scan 2 interfaces?

  I'm trying to figure if/how configure the ASA-SSM-20 for scan management/monitor interface and backplane (try to save money and buy not dedicated IPS/IDS for internal network). I'm under IPS v7.0 (8) E4 with v6.4 ASDM. I would use the management port to send traffic split of my Nexus 5548.

  Thank you!

  This feature is not supported at this time.

  Rafael

• Automatic update IPS 5525 X

  Hello

  I have two IPS ASA5525-IPS "module" firewall 5525-X.

  I put the proxy connection in DNS/Proxy settings for update of signatures, but I have an error message above:

  Auto Update Statistics

  lastDirectoryReadAttempt = 11:03:09 GMT - 03:00 Wednesday, January 9, 2013

  = Reading directory: https://198.133.219.25//cgi-bin/front.x/ida/locator/locator.pl

  = Error: Auto update an exception: failed to connect HTTP [1 110]

  lastDownloadAttempt = n/a

  lastInstallAttempt = n/a

  nextAttempt = 11:00:00 GMT - 03:00 Thursday, January 10, 2013

  Auxiliary processors installed

  Connection test I see the direct package in my firewall, and not passing on the proxy, I need using the proxy IPS for updating of signatures.

  The configuration seems correct to me.

  Any suggestions?

  TKS a lot.

  Hello

  This improvement in use of proxy server for updates would be available in later versions. (CSCsv89560)

  Kind regards

  Sawan Gupta

• ASA/IPS and IPS Manager Express

  I am trying to add my sensor to the IPS Manager Express but I keep the following error. IOException when trying to get certificate:java.security.cert.CertificationExpiredException: notafter Sam may 10 * 2008.

  I'm sure it's simple but can find how to solve this problem.

  Kind regards

  D

  This means that the SSL/TLS certificate on the web server of your sensor has expired on May 10, 2008.

  It is very common for the sensors that have been active for more than a year. When a sensor is generated, it is usually valid for only a year or two.

  You just need to create a new SSL/TLS certificate for your sensor.

  Connect on your sensor and run "tls key generate."

  http://www.Cisco.com/en/us/partner/docs/security/IPS/6.1/command/reference/crCmds.html#wp504369

  But remember that, once you do this, you should make sure attend you all other management systems that connect to your sensor and make sure the management system pulls down and accepts this new certificate (which often requires you to push some type of button I agree to the new certificate).

• Subscription to ASA IPS Signature

  I'm a little confused...

  If I have an ASA5510 bundle with an AIP-SSM-10 and contracts CON-SU2-AS1A1PK9, which includes also updates the signature 'Service for Cisco IPS'. I can not work if I have to then release another subscription and what is the code of the component. Thank you.

  Hello

  I found this link on Cisco's Web site:

  Q. can I both SMARTnet and Services Cisco IPS to receive comprehensive support and signature updates?
  A. No. ' Cisco Services for IPS "is a program of support for all Cisco solutions, intrusion prevention functionality. It combines features of support SMARTnet with IPS signature, updates by creating a support program full.
  http://www.ciscotechnologyinc.org/en/us/prod/collateral/vpndevc/ps5729/ps5713/PS4077/qa_c67-458612.html
  So that would lead me to think that it is all inclusive.
  Based on the attached PDF document, "CON-SU2-AS1A1PK9" seems to be a valid number for the AIP-SSM-10 for the ASA5510.  Have you received a PAK
  to purchase?  You are able to enter the PAK to www.cisco.com/go/license?  You then receive an activation key for the AIP - SSM?