ASA static IP Addressing for IPSec VPN Client

Similar Questions

• IP address of the IPSec VPN client did not get distributed via EIGRP

  We use an ASA for VPN remote access. He is running EIGRP redistribute static routes. When a client Anyconnect SSL connects, the SAA creates a static route for this client, and it gets redistributed via EIGRP. When an IPSec VPN client connects, the SAA creates a static route for this customer, but he isn't redisributed via EIGRP and so the client can not achieve anything. Why he would distribute a static created by an IPSec client?

  Thank you

  Have you set up IPP on dynamic Cryptography?

• Function of automatic update for the IPsec VPN Client

  Hello.

  Do you have anyone ever tried the PIX / ASA ' feature IPsec VPN Client Auto-Update?

  (see also Document ID: 105606).

  He wants to make sure that I understand this right.

  The user will receive a popup of information telling him to download the latest version of the client? And then there start the update itself?

  If so, this would mean that the user must have the rights of full adminsitative using a laptop.

  From my point of view, full administrator rights on a laptop are prohibited - 100% and therefore the functionality would be totally useless.

  Anyone who can tell me whether I am good or bad?

  Best

  Frank

  Frank,

  You are right, if the computer desktop or labtop is completely locked regarding the installation of the software the customer won't be able to install it, they may be able to download from the link that you configured in ASA, once they connect to your server ASA RA but with regard to the installation user's machine needs rights profile appropriate to be able to install it.

  HTH

  -Jorge

• The ID attribute of the station call needs for Anyconnect VPN client MAC address

  Hi all

  We test tring Anyconnect VPN users to connect using the certificate. ASA East of validation / authentication user based on cert and approval it requires Radius server (ISE). Currently ASA sends the Ip address of the VPN client in «calling station ID» We want ASA to send the Anyconnect VPN client MAC address to the radius server in RADIUS attribute «calling station ID»  Is it possible to do this. Get around them?

  Parag salvation,

  The calling Station ID always contains the IP if Anyconnect VPN.

  L3 is originally unlike wireless which has L2 Assoc.

  Currently no work around.

  Respect of

  Ed

• How do I allow IPSec VPN client-to-client

  Can someone briefly describe the steps on an ASA to allow both IPSec VPN clients talking to each other. They are in the same pool of addresses. I already have two same-security-traffic permit for inter and intra interface statements. Thank you!

  Sent by Cisco Support technique iPhone App

  try to including this traffic in the States of sheep you have

  Alos, you may need to make changes to the acl split rules

• Problems connecting to help connect any and the Ipsec VPN Client

  I have problems connecting with the VPN client connect no matter what.  I can connect with the Ipsec VPN client in Windows 7 32 bit.

  Here is my latest config running.

  Thank you for taking the time to read this.

  passwd encrypted W/KqlBn3sSTvaD0T

  no names

  name 192.168.1.117 kylewooddesk kyle description

  !

  interface Vlan1

  nameif inside

  security-level 100

  IP 192.168.1.1 255.255.255.0

  !

  interface Vlan2

  nameif outside

  security-level 0

  IP address dhcp setroute

  !

  interface Ethernet0/0

  switchport access vlan 2

  !

  interface Ethernet0/1

  !

  interface Ethernet0/2

  !

  interface Ethernet0/3

  !

  interface Ethernet0/4

  !

  interface Ethernet0/5

  !

  interface Ethernet0/6

  !

  interface Ethernet0/7

  !

  boot system Disk0: / asa822 - k8.bin

  passive FTP mode

  DNS lookup field inside

  DNS domain-lookup outside

  DNS server-group DefaultDNS

  domain wood.local

  permit same-security-traffic intra-interface

  object-group service rdp tcp

  access rdp Description

  EQ port 3389 object

  outside_access_in list extended access permit tcp any interface outside eq 3389

  outside_access_in list extended access permit tcp any interface outside eq 8080

  outside_access_in list extended access permit tcp any interface outside eq 3334

  outside_access_in to access extended list ip 192.168.5.0 allow 255.255.255.240 192.168.1.0 255.255.255.0

  woodgroup_splitTunnelAcl list standard access allowed host 192.168.1.117

  inside_nat0_outbound to access ip 192.168.1.0 scope list allow 255.255.255.0 192.168.5.0 255.255.255.240

  outside_access_in_1 list extended access permit tcp any host 192.168.1.117 eq 3389

  woodgroup_splitTunnelAcl_1 list standard access allowed 192.168.1.0 255.255.255.0

  inside_nat0_outbound_1 to access ip 192.168.1.0 scope list allow 255.255.255.0 192.168.5.0 255.255.255.240

  inside_nat0_outbound_1 to access extended list ip 192.168.5.0 allow 255.255.255.240 all

  inside_test list extended access permit icmp any host 192.168.1.117

  no pager

  Enable logging

  timestamp of the record

  asdm of logging of information

  Debugging trace record

  Within 1500 MTU

  Outside 1500 MTU

  mask pool local Kyle 192.168.5.1 - 192.168.5.10 IP 255.255.255.0

  IP local pool vpnpool 192.168.1.220 - 192.168.1.230

  ICMP unreachable rate-limit 1 burst-size 1

  ASDM image disk0: / asdm - 631.bin

  don't allow no asdm history

  ARP timeout 14400

  Global (inside) 1 interface

  Global 1 interface (outside)

  NAT (inside) 0-list of access inside_nat0_outbound_1

  NAT (inside) 1 0.0.0.0 0.0.0.0

  public static interface 3389 (indoor, outdoor) 192.168.1.117 tcp 3389 netmask 255.255.255.255 dns

  public static tcp (indoor, outdoor) interface 8080 192.168.1.117 8080 netmask 255.255.255.255

  public static tcp (indoor, outdoor) interface 3334 192.168.1.86 3334 netmask 255.255.255.255

  static (inside, upside down) 75.65.238.40 192.168.1.117 netmask 255.255.255.255

  Access-group outside_access_in in interface outside

  Timeout xlate 03:00

  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00

  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00

  Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute

  timeout tcp-proxy-reassembly 0:01:00

  dynamic-access-policy-registration DfltAccessPolicy

  WebVPN

  the files enable exploration

  activate the entry in the file

  enable http proxy

  Enable URL-entry

  SVC request no svc default

  AAA authentication http LOCAL console

  Enable http server

  http 192.168.1.0 255.255.255.0 inside

  No snmp server location

  No snmp Server contact

  Server enable SNMP traps snmp authentication linkup, linkdown cold start

  Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac

  Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac

  Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac

  Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac

  Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac

  Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac

  Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac

  Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac

  Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac

  Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac

  life crypto ipsec security association seconds 28800

  Crypto ipsec kilobytes of life - safety 4608000 association

  crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs Group1 set

  Crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5

  outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP

  outside_map interface card crypto outside

  crypto isakmp identity address

  crypto ISAKMP allow outside

  crypto ISAKMP policy 10

  preshared authentication

  3des encryption

  sha hash

  Group 2

  life 86400

  Telnet 192.168.1.0 255.255.255.0 inside

  Telnet timeout 5

  SSH timeout 5

  Console timeout 0

  dhcpd dns 8.8.8.8 8.8.4.4

  dhcpd lease 3000

  !

  dhcpd address 192.168.1.100 - 192.168.1.130 inside

  dhcpd allow inside

  !

  a basic threat threat detection

  host of statistical threat detection

  Statistics-list of access threat detection

  no statistical threat detection tcp-interception

  WebVPN

  allow outside

  SVC disk0:/anyconnect-win-2.4.1012-k9.pkg 1 image

  enable SVC

  internal sslwood group policy

  attributes of the strategy of group sslwood

  VPN-tunnel-Protocol svc webvpn

  WebVPN

  list of URLS no

  internal group woodgroup strategy

  woodgroup group policy attributes

  value of server DNS 8.8.8.8 8.8.4.4

  Protocol-tunnel-VPN IPSec

  Split-tunnel-policy tunnelspecified

  value of Split-tunnel-network-list woodgroup_splitTunnelAcl_1

  mrkylewood encrypted Q4339wmn1ourxj9X privilege 15 password username

  username mrkylewood attributes

  VPN-group-policy sslwood

  VPN - connections 3

  VPN-tunnel-Protocol svc webvpn

  value of group-lock sslwood

  WebVPN

  SVC request no webvpn default

  tunnel-group woodgroup type remote access

  tunnel-group woodgroup General attributes

  address pool Kyle

  Group Policy - by default-woodgroup

  tunnel-group woodgroup ipsec-attributes

  pre-shared key *.

  type tunnel-group sslwood remote access

  tunnel-group sslwood General-attributes

  address pool Kyle

  authentication-server-group (inside) LOCAL

  authentication-server-group (outside LOCAL)

  Group Policy - by default-sslwood

  !

  class-map inspection_default

  match default-inspection-traffic

  !

  !

  type of policy-card inspect dns preset_dns_map

  parameters

  message-length maximum 512

  Policy-map global_policy

  class inspection_default

  inspect the preset_dns_map dns

  inspect the ftp

  inspect h323 h225

  inspect the h323 ras

  inspect the netbios

  inspect the rsh

  inspect the rtsp

  inspect the skinny

  inspect esmtp

  inspect sqlnet

  inspect sunrpc

  inspect the tftp

  inspect the sip

  inspect xdmcp

  Review the ip options

  type of policy-card inspect dns MY_DNS_INSPECT_MAP

  parameters

  !

  global service-policy global_policy

  context of prompt hostname

  call-home

  Profile of CiscoTAC-1

  no active account

  http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address

  email address of destination [email protected] / * /

  http https://tools.cisco.com/its/service/...es/DDCEService destination address

  destination-mode http transport

  Subscribe to alert-group diagnosis

  Subscribe to alert-group environment

  Subscribe to alert-group monthly periodic inventory

  monthly periodicals to subscribe to alert-group configuration

  daily periodic subscribe to alert-group telemetry

  Cryptochecksum:6fa8db79bcf695080cbdc1159b409360

  : end

  asawood (config) #.

  You also need to add the following:

  WebVPN

  tunnel-group-list activate

  output

  tunnel-group sslwood webvpn-attributes

  activation of the Group sslwood alias

  Let us know if it works.

• AAA ipsec vpn clients how to see the history of connection on asdm or asa5510

  Hello all, I would like to know how see history of connection ipsec vpn client users, they authenticate to the local aaa, not in active directory. I am able to see the current logon session. go to monitoring\vpn\vpn statistics\sessions, this shows me sessions underway, but I would like to see for example the connections client vpn for the last month. I did some research and saw the info on aaa Server? I checked that article and does not see what I was looking for.

  It's actually a called (NPS) network policy server microsoft radius server.

  The one I used (ACS 5 and ACS 5) who was just an example.

  You can review the below listed doc

  http://fixingitpro.com/2009/09/08/using-Windows-Server-2008-as-a-RADIUS-server-for-a-Cisco-ASA/

  Jatin kone

  -Does the rate of useful messages-

• Static IP address for printer with a wired connection

  My printer (HP7210) is wired connected to my WRT54GL router. 2 computers also have a wired connection, my laptop is connected wireless. All of these computers use the connected printer. 2 computers can only use a static IP address for the printer. How can I set a static IP in my router?

  I don't think that the WRT54GL supports static IP with the stock Linksys firmware.

  The solution is to assign the static IP address to the printer. Most of the printers on network supports the definition of a static IP address manually. The key is to set the static IP address on the printer out of the range the WRT54GL uses for its DHCP server. Sign in to the administration page of your router and see what addresses the range of IP addresses he uses to hand over the IP address of the client. Usually, Linksys likes to start xxx.xxx.xxx.100 and have leases of 50 to 100 a cancelled so to avoid conflict, you can use any IP in the range of xxx.xxx.xxx.002 through xxx.xxx.xxx.099, or through xxx.xxx.xxx.254 xxx.xxx.xxx.201. After configuring the IP static on the printer, you may need to reconfigure all the print drivers that are already installed on client computers so that they can connect to the new static IP address to the printer.

  See the user guide page 140 to learn how to manually change the IP of the HP 7210 printer settings.

  For example try using the next/IP subnet mask if your router is configured to use 192.168.1.100 to its DHCP server setting:

  Use the IP address of: 192.168.1.202

  Use the subnet mask: 255.255.255.0

  Use the gateway: 192.168.1.1

  To change the IP of the control panel settings

  1. press Setup.

  2. press 8and then press 3.

  This selects the Network Configuration , and then IP settingsmenu.

  3. press on until Manual appears, then press OK.

  4. change the IP address, and then press OK.

  5. change the subnet maskand then press OK.

  6. change the default gatewayand then press OK.

• HP laserjet professional P1606: how to change static ip address for HP laserjet professional P1606 dn

  Dear Sir.

  I have the professional printer hp (hp laserjet P1606) model, I have connected the printer to my router by ethernet port. Thus, he got a dynamic IP, that we know changes this dynamic IP most of the time and create problems. If I click on the ip address of the hp printer on the list of clients of wifi router. There is possibility to provide the static ip address for printer I did and gave a static ip address. a few days later the router has been restored and then I face the problem is I couldn't Ministry the ip address of the printer.   How can I access the ip address of the printer... because until the printer is not an IP and I click on the ip address and a printer page does not open I couldn't change the ip address or the type of static or dynamic ip... .the photos I have uplaoded...

  

  Hi @Tahir-Mehmood,.

  I would say to restore the printer back to factory settings. HP LaserJet Pro P1566 and P1606dn - default settings factory restore printers.

  Then, the router must assign a new IP address to the printer and you should then be able to again access the server built-in Web printer.

  If the router assigns the printer IP address automatically, temporarily connect the printer to the computer using the Ethernet cable and ad hoc of the printer. This will give you an IP address so you can access the printer built-in Web server, and then you can configure the IP address again through your network.

  I hope this helps. Thank you.

• Set a static IP address for the printer

  One of the most common steps given when members of the community have printers that will remain not connected is affecting the camera a static IP address. Most of the members to respond to messages will include a document that's going to work on the steps and it is very useful. I found a video which will also show you this process on a printer Photosmart 7510.

  It will go well to enter the IP address of the printer in the web browser and access the built-in web server (EWS). Once in SAP, it shows the path to take to set the static IP address for the printer.  I thought it would be a good video to share with the community so that there is assistance available for those of us who are visual learners. Here's the video promised on the static IP address.

  I hope this helps the community. Good impression to everyone!

• Help with static IP address for the WRT54GL by EZXS55W

  Hi all!

  I'm having some trouble network at the office and cannot keep close internet for all the world just try a new mode of connection of the cables.

  We recently received a notice on five new static ip addresses for the office, we did turn on DHCP those for a year now.

  We have a basic network requiring no credentials of the modem or connection.

  At this moment we have a network cable straight from the network on the router (WRT54GL) failure. Then, the router is defined in gateway mode and uses one of our static Ip addresses.

  I wanted to connect my server to the same fault, but using the static IP address, so I thought why not do it through a switch.

  So the network failure, I ran the right network cable into the uplink on the switch (EZXS55W) connector and then put the router in port 1 and my server port2. Both connected with the right cables.

  The Internet light on the router does not light and the switch just flicker light now and then.

  Maybe someone here can help me how I should put up to get to the top and running, what do I have to configure something special on the router or maybe somewhere use twisted cables.

  Please I need your help!

  Thanks for the help and you where once there was something wrong along the way.
  I tested my switch before trying this, but apparently it is now broken.
  I borrowed another switch of a friend and everything was up and running in a few seconds.
  So now I just need to buy a new switch and everything will be fine.
  Once agan, thank you...

• Is availble for IPsec VPN FOS 6.3 support stateful failover

  Is availble for IPsec VPN FOS 6.3 support stateful failover

  SAJ

  Hello Saj,

  Unfortunately not... stateful failover replica information such as:

  Table of connection TCP, udp xlate table ports, h.323, PAT port allocation table...

  they replicate data such as:

  user authentication (uauth) table

  Table ISAKMP / IPSEC SA

  ARP table

  Routing information

  Therefore, in the case where the main breaks down, the IPSEC vpn will be reformed for the failover... Meanwhile, the user will not be able to access the applications...

  I hope this helps... all the best... the rate of responses if deemed useful...

  REDA

• Cannot configure the static IP address for Cisco Touch 8 "

  Hi all

  I found that I can not configure the static IP address for Cisco Touch on TC7.0.1 / 7.0.2 with the procedure described below.

  1. upgrade a codec (e.g. SX20 TC6.3 or less) and a touch paired with the codec for TC7.0.2.

  2. after the upgrade, désapparier (with the help of désapparier Touch button) touch and it reboot.

  3. tap on "IP settings."

  4. Select "Manual IP allocation".

  5. Enter the IP address, subnet mask, default gateway, and then press "Save".

  Even though we have configured the static IP address with the above procedure, IP allocation remains 'Auto' (= DHCP) and the IP address, subnet mask, default gateway is also empty.

  In this situation, the only way to configure the IP address for the Touch is to use the DHCP server.

  I guess many users uses the static IP assignment like us, so please fix it as soon as POSSIBLE.

  Best regards

  Kotaro Hashimoto

  Hi Kotaro,

  It is a known problem in TC7.0.1 and TC7.0.2. The id of the bug is CSCum82147.

  To work around the problem, set IP address you want the button before moving on to TC7.0.x.

  The bug has been fixed and will be included in the next version of the TC software.

  Kind regards

  Jonas Tysso

• IPsec VPN Client - aggressive mode

  Hi all

  I just got got off the phone with the customer who underwent a check sweep of security from a third-party vendor. One of the vulnerebilities mentioned in the report is this:

  

  I know that only the IPsec VPN client using aggressive mode to negotiate Phase I. So my question is how to convince my customer to continue to use the IPsec VPN? Is this what can I do to reduce the risk of the use of this type of access remotely. In addition, am I saw the same problem, if I use SSL based VPN Client?

  Kind regards

  Marty

  Hello

  Ikev1 HUB in aggressive mode sends his PSK hash in the second package as well as its public DH value.

  It is indeed a weakness of slope Protocol.

  To be able to act on this, U will be on the path to capture this stream in order to the brute force of the hash [which is not obvious - but not impossible.

  This issue is seriously attenuated by activating XAUTH [authentication].

  Xauth happens after the DH, so under encryption.

  Assuming that the strong password policy is in use, it is so very very very difficult to find the right combination of username/password.

  Ikev2 is much safer in this respect and this is the right way.

  See you soon,.

  Olivier

• How can I change DHCP to static IP address for my ESX Server?

  Hi all:

  because of my mistake, I configured the ESX for DHCP server.

  So, how can I change DHCP to static IP address for my ESX Server?

  Thank you very much.

  hihiy

  Hello

  You can assign static IP using the below command

  esxcfg-vswif - i

  Restart the network service

  restart of the #service network

  Try this command to list the IPconfig

  #esxcfg - vswif - l

  Hope this helps!