ASA5505: Configure the ASA for IPSec and SSL VPN?

Similar Questions

• Windows IPSEC and SSL VPN client on the same machine

  Matches (coexistence) installation of IPSEC and SSL vpn clients that are supported on the same computer, windows (XP and Win7)?

  As mentioned by Patricia and Jennifer (5 stars), you can install two clients on the same machine without any problem.

  The tricky part comes when you are trying to connect two clients at the same time, that's when you may encounter unexpected problems.

  However, if your intention is to install both clients and connect them individually and not at the same time, you'll be fine.

  If you have any other questions, please mark this question as answered and note all messages that you have found useful.

  Thank you.

  Portu.

  Post edited by: Javier Portuguez

• Configuring the network for windows7 and computers portable XP with printer connected to the router

  Computer laptop windows 7 works with the printer lexmark that is connected to the router, but the laptop XP who worked with the printer can't find using the "add a Printer Wizard. Two portable computers connect to the internet O K

  Printers configured in this mode are better develop a fixed TCP/IP address.  Your printer manual should tell you how to do this.  In general, there is a 'Settings' menu on the printer where it can be defined.  The IP address should usually have the first three digits than other devices on the subnet (for home networks it would be something like 192.168.1.x) and the final number should be unique and apart from the DHCP numbers range that your router would normally assign (see the manual of your router).

  HTH,
  JW

• The ASA for FW and IPS options with high availability

  Question 1:

  -----------

  I'm looking for IPS solution for the customer and the verification of the ASA next part number;

  ASA5540-AIP20-K9

  (ASA 5540 appliance w / AIP-SSM-20, SW, HA, 4GE + 1FE, 3DES/AES)

  What does AP mean here - what software?

  In this case you have to buy a second unit (at the same price) for the recovery of?

  (I wondered if ASA has also a cost - efficient as PIX failover solution-discounted price for the unit of failover).

  If I choose the ASA VPN edition is it possible to add IPS inside module?

  Hello

  Q: what does AP means here - what software? In this case you have to buy a second unit (at the same price) for the recovery of?

  The "ASA5540-AIP20-K9" is only for 1 unit of ASA, with function of software HA (active/active, active / standby). You can add/buy another unit to achieve HA/recundancy.

  I think that the price of a unit all them is always the same, ASA has no unit to voluntarily make the function FO.

  Q: if I choose the ASA VPN edition is it possible to add IPS inside module?

  Large malicious Intrusion Prevention & mitigation program is included, as mentioned in the 'picture' 3 Security of the network to the VPN gateway"in:

  http://www.Cisco.com/en/us/products/ps6120/products_data_sheet0900aecd80402e3f.html

  Rgds,

  AK

• Tunnels of router that support s multiple VPN IPsec AND SSL VPN

  I have a main office and an office, each with a RVL200 connected via the IPSec VPN tunnel. We grow faster than we thought and add 2 more branches. Is there a router that is similar to the RVL200 can I put in my main office in support of multiple IPSec tunnels connected to RVL200 in branches, but also keep the SSL VPN?

  It seems that the Cisco ASA 5505 will do.

• The ASA - Client to use SSL and connections options I have?

  We have a large site and have only allowed using IPSEC for all our branch in branch and the user tunnels. We tried SSL years but she limits so we stopped deployment. We must now begin the SSL VPN user and I have a few questions basic ASA.

  I have a unused ASA 5510 for tests that currently holds the 8.3.2 on it, Security code more license, 100 SSL VPN peers and 250 total peers of VPN, VLAN max 100, 2 seconds, active/active contexts, 2 proxies of phone CPU and everything else is disabled. We do not intend on using a SSL connection web anywhere (Anyconnect essentials?) and will not use the entire customer VPN SSL which will be hand loaded on machines or downloaded from the ASA and loaded on the computer if possible. I want to know is what version of the current code can install on my ASA without losing my existing SSL VPN 100 peers license and that the Anyconnect customer would be sustained? I've seen talk about premium Anyconnect but do not know its relationsonship. If I improve the ASA of new releases or versions of code my peer SSL VPN license turns into an Anyconnect Premium license?

  Any help to get started you in the right direction would be appreciated. I know I can spend days trying to understand Cisco licenses and traps and still get burned in the end with the function or the wrong license. Basically, I want to know what I have to install the end-user complete SSL VPN clients and I have to do with the ASA to provide this functionality with current license / feature set there. I also want to know what the end user should be used because it seems that Anyconnect Secure Mobile is the same if I use all its security features. Example - I am not able to check for firewall/malware etc programs but we currently have a policy in place which does not allow browsing the Internet or access when end users have connections VPN tunnel on our site. That restriction will always be kept if this is possible thanks to the SSL VPN connection also.

  Thank you

  Paul

  The SSL VPN client-based license will remain active on your box through Software ASA updates later. AnyConnect Essentials (which you already have) will work with the feature of SSL VPN license.

  You would be upgrading to AnyConnect Premium only if you wanted to add features like clientless SSL VPN (purely based on a browser) or other items such as Advanced Endpoint Assessment (AEA). AnyConnect Premium can coexist with Anyconnect Essentials on the SAA even if you can't mix and match licenses Premium and Essentials.

  Essential distinction or Premium is mainly directed towards the installation of the ASA. The same AnyConnect Secure Mobility client software (version 3.1 is the latest for Windows and OS X and is quite a nice new version) is used in both cases. Functional additional client plug-ins are things such as the AEA and the NAC 802.1 x. Your group policies based on the SAA as no split tunneling, etc. remain in force.

  If you intend to allow clients of mobile devices (iPhone, iPad, and Android (a very limited support for the last BTW)) to access your VPN, you will need to add the mobile on the SAA AnyConnect license and install the client from the respective AppStore. Note that Windows Phone and Blackberry don't are not supported as client AnyConnect.

• Please help to configure the router for internet connection 871W!

  Hello world!

  I just started styding for CCNA, so I'm totally new to Cisco stuff. Recently bought a router 871W and spent two days in a row trying to configure internet connection with no luck! I use the port console for the configs and SDM/CCP. Would be greateful if someone could tell me how to do simple configs of internet connection. I googled everything but it's still confusing. I can't assing all-IP ports FA 0-3. I used instead of the VLAN. But all tutorials use FA0 and when I try to assign an IP address to FA0 it gives me some L2 cannot be assigned or something... :/ And I am also confused at what address IP use for WAN.

  I connected the cable between the Modem and the LAN of the PC port and copied some IP addresses which I think I have to use to configure the router for internet connection. And here they are:

  ISP IP: 76.114.54.255

  SUBNET: 255.255.248.0

  GATEWAY: 76.114.48.1

  DHCP: 69.252.97.4

  DNS: 75.75.75.75

  75.75.76.76

  If you can, please help! Thank you!

  Hi david,

  Looks like your 871w can not get a dynamic IP address: % unknown DHCP problem... No possible allocation

  you could ask your ISP to perform a reset/clear MAC add and try again?

  also, kindly post lastest "show run".

  Edit: just to see you've updated your screenshot. could you add command under 4

  Mac-add 0001.4af9.8b83

• Failed to create field when you configure the domain for the UCM 11 g

  Hi all
  
  After installing the Oracle Weblogic 10.3.3 and ECM Oracle 11g, I configure the domain for the AAU with SCW. The wizard still fails, and error log is:
  
  2010-06-09 11:40:25, 984 ERROR [create_gui] com.oracle.cie.wizard.domain.gui.tasks.DomainCreationGUITask - build error!
  Traceback (innermost last):
  "< Iostream >" file, line 17, in there?
  TypeError: unsupported or operand types +: 'NoneType' and 'str '.
  
  at org.python.core.Py.TypeError (unknown Source)
  at org.python.core.PyObject._basic_add (unknown Source)
  at org.python.core.PyObject._add (unknown Source)
  to org.python.pycode._pyx31.f$ 0 (< iostream >: 17)
  to org.python.pycode._pyx31.call_function (< iostream >)
  at org.python.core.PyTableCode.call (unknown Source)
  at org.python.core.PyCode.call (unknown Source)
  at org.python.core.Py.runCode (unknown Source)
  at org.python.util.PythonInterpreter.execfile (unknown Source)
  at org.python.util.PythonInterpreter.execfile (unknown Source)
  
  Does anyone have an idea how to fix? Thank you.
  
  David

  Hey David,

  I got it exactly the same problem when I installed a few weeks back. Fortunately, the solution is simple.

  Make sure that you run the config (config.cmd or config.sh) script that is located in the %MIDDLEWARE_HOME%/Oracle_ECM1/common/bin/ directory as opposed to the standard Wizard. This runs the wizard for creating domain with a different set of parameters so that the jython script that executes orders WLST at the end does not fail. If you are using windows, and using the shortcut it is start-> programs-> ECM Oracle 11g - Home1-> configure application server. One of our other guys had a problem where the entry "start in" for this shortcut was bad as well. On mine it is % MIDDLEWARE_HOME%/Oracle_ECM1/install/bin.

  Hope that helps,

  Andy Weaver - Senior Consultant software
  Fishbowl Solutions< http://www.fishbowlsolutions.com?wt.mc_id="L_Oracle_Consulting_amw_OTN_ECM">

  Published by: Andy Weaver on June 9, 2010 07:38
  Typo fixed.

• I bought a gift card a while and now I don't have the balance for her and when I try to buy I can not because I already bought it. Help, please

  I bought a gift card a while and now I don't have the balance for her and when I try to buy I can not because I already bought it. Help, please. If I can't do my 15 birthday money are wasted. He said as I already had a gift card in my account, but somehow everything is over now when I was not yet buy anything!

  A gift card is redeemable only once, it is useless to try to buy it back again.

  To see what, if any, balance you have left on the account you share you: see your credit balance - Apple Support iTunes

  To see what you bought on the account and therefore potentially used some/all of it: see your purchase history in iTunes on Mac or PC - Apple Support store

• Downloaded the update for Firefox, and now I can't get rid of AOL.

  Downloaded the update for Firefox, and now I can't get rid of AOL. I tried to remove anything that is related to AOL and when restart Firefox... There are once again AOL. I even reinstalled Firefox... He was there again.

  Where AOL is displayed - homepage?

  I think the first thing to check is if you have any modules related to AOL. These can replace your regular settings. You can view and disable all extensions essential or unknown here:

  Firefox orange (or the Tools menu) button > addons > Extensions category

  Note that in most cases, you should use the link to restart Firefox to actually disable the extension that you have chosen to disable.

  Then, to fix your homepage, try the procedure described in this article: How to set the home page.

  If there is a problem with your suppliers of research from Google for AOL, try this extension:

  https://addons.Mozilla.org/en-us/Firefox/addon/SearchReset/

  Any improvement?

• I have the time to default iPhone 4 iOS 7.1.2 iPhone App not updated since the last 3 days and also checked all the settings for location and also set as new iPhone always present problem... Please try to fix... Thanx

  I have the time to default iPhone 4 iOS 7.1.2 iPhone App not updated since the last 3 days and also checked all the settings for location and also set as new iPhone always present problem... Please try to fix... Thanx

  Turn off your device and turn it on again. If this does not help, sign out of your account and reconnect.

  In addition, you can try to reset your settings.

  • Press and hold the sleep/wake button
  • Press and hold the Home button
  • Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.

  Alternatively, you can go to settings - general - reset - Reset all settings

• "I lost the top of my Web page that has"File"Edit etc and the toolbar with the House for 'House' and the arrow of" return to the last page. Does anyone know how to reinstall these? I'm obviously not computer savy.

  Missing once more, the blue band at the top of my Web page that has the file ',' Edit etc and the toolbar with the House for 'Home' and the arrow «back to last page»

  == My grandchildren's play about that.

  Press the Alt key to display the Menu bar, then open view > toolbars and select menu bar and the bar of Navigation, so that they have a check mark.

• Satellite L500-1 - where to find the drivers for XP and Windows 7?

  For me, are necessary for the driver to L500-1. On a site not found. If it is a good idea to use the driver other model of what to write.

  To me, the driver under Windows XP, Windows 7.

  Hello

  I searched a bit on the Toshiba site and it seems that your model is part of the PSLJTE series and as a result, you can download all the drivers for XP and Windows 7 here:

  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers
  Laptop > Satellite > Satellite L Series > Satellite L500 > PSLJTE

  Check this box!

• Now, I have no sound on my lapt top having a media player to "check the drive for errors" and laptop have no dound I did a windows update, but no sound came through, please help me

  Now, I have no sound on my lapt top having a media player to "check the drive for errors" and laptop have no d

  the sounds I made a windows update, but no sound came through it please please help with a link to something. Re, I did check the drive for errors and still after it again all the sounds left my laptop which is a vaio song

  Thanks for any help

  Hi, Pantha9,

  What version of Windows are you using?

  Start > right click on computer and select Manage

  Select Device Manager

  Click on the + next to sound, video and game controllers

  Right-click on the driver and select uninstall

  Restart the computer and Windows will reload the driver

  New attempt of his

  Access the site of the factory and search for driver updates

• A protocol that would provide the service for IPv4 and IPv6 traffic? (RIPv1, RIPv2, RIPng, BGP)

  A protocol that would provide the service for IPv4 and IPv6 traffic?

  • RIPv1
  • RIPv2
  • RIPng
  • BGP

  Hi SandeepTandel,

  ·         Your computer is on a domain network?

  ·         What exactly is the question do you face?

  Here the following protocols provide for IPv4 and IPv6 traffic or respectively:

  Ø Bng supports IPv4 and IPv6 protocols

  Ø RIPng supports IPv6

  Ø RIPv1 and RIPv2 supports IPv4

  Let us know if this information useful.