Ask about the feature find my phone

Similar Questions

• I already bought the annual plan, I have installed PS, but I can't open the LR, he keeps asking about the serial No.

  I already bought the annual plan, I have installed PS, but I can't open the LR, he keeps asking about the serial No.

  isn't the annual plan for ps and lr?

  Download LR you remove and reinstall your installation of Photoshop Lightroom 5?  Licensing for your membership apply to Lightroom if you install through the creative Cloud Desktop application.  You can find more details at install and update the apps - https://helpx.adobe.com/creative-cloud/help/install-apps.html.

• Where can I find out about the features on my computer

  original title: I have a laptop dell inspiron #5030

  To learn about the map of digital photography and 2 holes in the front (speakers?)

  MIKE

  Go to the Dell site and look for your model or contact Dell technical support.

• Ask about the policy of replacement of defective parts under warranty (laptop)

  Hello. I had a laptop computer with a HARD drive 320, which became faulty (not totally, in fact) within 2 weeks of purchase. I turned it a HP service center and they got it replaced with a new job. Now everything works fine ATM, however I have noticed that my current HARD drive is a Western Digital while I remember that I had before the failure was a one Seagate. Now, I have a question about the HP replacement policy: is it possible to get another brand of HARD drive altogether in lieu of one that was part of the original shipment or should I have obtained one of the same company (Seagate) otherwise the same exact model of the HARD drive as a replacement?

  They replace it by what they have there at the time, any policy on this.

  This is a forum to a user, no employee of HP here, with the exception of the moderators of the forum.

  WD is currently better than Seagate in my opinion.

  .

• Ask about the segregation of database access by using the authentication of the os in the windows environment

  Hello

  I have a question about the segragation of database access using authentication of the os (like sqlplus "/ as sysdba") in the windows environment. Let me briefly explain my requirement: -.

  Assume that you have two DBA viz DBA1 and DBA2 and 4 resideds of databases in a windows server say A, B, C and D.Now I want to configure it in a way if DBA1 opens a session on the server then it may connect to the database A and B using only OS and DBA2 authentication can connect to database C and D only use OS authentication.

  Please let me know how to configure for this requirement.

  Version of the database is 11.2.0.3

  Hello

  This doc is 11.1 but I guess it's the same in 11.2 roles on Windows and administering external users

  You create a group ORA_SID_DBA and doing it this way - in recent years I have done but it used to work ok...

  See you soon,.

  Harry

• Ask about the creation and filling I$ table on different condition

  Hello
  I have a question about the creation and filling I$ table on a different condition. In which condition the I$ table creation? And these conditions are given below:
  
  (1) * source and transit area * are on the same server (that is to say target is located on another server)
  (2) * gathering and target area * are on the same server (IE source is on another server)
  (3) * source, transit area and target * are * different 3 * Server
  Source 4), area transit and target are on the same server
  Thank you

  I'm not quite clear to your question. Always try my best to erase it.

  In your all over requirement I$ table will be created.
  If the same staging as target (a database, a user) then all temporary tables are created in this user
  If the scaffolding is different from the target (a database, two users (A, B)), then all temporary tables will be created under that user A (lets consider) and the data will be inserted into the target table that is present to user B

  Staging is different from the target (two database, two users (A1, A2), architecture not recommended) if all temporary tables will be created under that user A1 (A1 of the databases) and the data will be inserted into the target table which is present in user A2 (A2 data base)

  If the source, staging, the target will be under a database then no. LKM is required, IKM is sufficient to load the data into the target. Especially for this, you can see an example given by Craig.
  http://S3.amazonaws.com/ora/ODI-Simple_SELECT_and_INSERT-interface.swf

  Thank you.

• Ask about the types of objects

  Hello
  
  I have a question about the type of object. I want to see the script for the type of object created, that is already stored in the database. How can I see who
  
  
  Concerning

  Hello

  So, you can try [DBMS_METADATA. GET_DDL | http://download.Oracle.com/docs/CD/B19306_01/AppDev.102/b14258/d_metada.htm#ARPLS640]...

  MHO%xe> create or replace type mytype as object( col varchar2( 10 ));
    2  /
  
  Type is aangemaakt.
  
  Verstreken: 00:00:00.37
  MHO%xe> select dbms_metadata.get_ddl('TYPE', 'MYTYPE') from dual;
  
  DBMS_METADATA.GET_DDL('TYPE','MYTYPE')
  ------------------------------------------------------------------------------
  
    CREATE OR REPLACE TYPE "MHO"."MYTYPE" as object( col varchar2( 10 ));
  

• Ask about the Pause/break key on the keyboard

  As Saroseus,

  I have a program that uses the Pause/break to continue to operate and without it I can not continue to use it for work. The work of the society for us gave keyboards with the Pause/break key, but it is not ergonomic and it's hurting my wrist to use. That is why I bought this keyboard. This is a great keyboard and it works well, but I need this button "Pause". While Microsoft can do you something about it.

  Hello

  Let me ask you;

  • What exactly you're talking about when you say, ' I need this button "Pause"?
  • Is not the Pause/break key in the keyboard you purchased, working?
  • This keyboard does not have a Pause/break key?
  • Do you mean you bought now ergonomic keyboard?
  • The keyboard has Pause and break keys separately?

  It might be possible that some newer keyboards may have separate keys for the pause feature and the pause feature. Instead of these two functions are on the same key, the keyboard has a separate PAUSE button of the PAUSE button.

  On many keyboards, the key that controls the functions pause and break is usually labeled as the PAUSE button. As a result, many keyboard shortcuts show you "Press a PAUSE button." However, when you only press the BREAK key, the default behavior is to take a break.

  This behavior that many people know can cause some confusion on newer keyboards that have separate PAUSE and BREAK keys. For example, the newer laptops may have separate PAUSE and BREAK keys.

  Steps to reproduce the behavior

  Follow these steps on a keyboard that has one button PAUSE/ATTN:

  1. Open a command prompt window. To do this, click Start, click run, type cmd.exe, and then click OK.
  2. At the command prompt, type dir, press the ENTER key and immediately press the PAUSE/BREAK key.

     Note that the list of files in the directory stops. This behavior indicates that the default behavior of the key is to pause. To see this behavior for a directory that has a short list of files, you must press the PAUSE/BREAK key very quickly after you press the ENTER key.

  3. Press CTRL + PAUSE/BREAK.

     Note that the list of files in the directory stops and returns you to the command prompt. This shows that the secondary behavior of the key is to break.

  In addition, if you follow these same steps, and if you press the CTRL + Windows Logo + PAUSE/BREAK Keyboard shortcut to open the System Properties dialog box, the dialog box does not appear. This behavior is further proof that the default behavior of the PAUSE/BREAK key is to pause.

  If the keyboard does not pause button, you can use the screen keyboard and check.

  Open the on-screen keyboard by clicking the Start button , clicking all programs, Accessories, ease of access, and then click on-screen keyboard.

  You can see: using the keyboard (OSK) typing on-screen

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

• Question about the feature keys FN on Portege R200

  Hello! My laptop is a Portege R200

  I cleaned up my HARD drive and installing WXP Pro

  I downloaded all the drivers for the Toshiba site R200

  Now the problem is that there are two kinds a change of the device driver display

  I installed the first called TDspBtn and now I am able to get the LCD, LCD + CRT or CRT by pressing Fn + F5. I do not like this feature because theres no icon displayed as brightness oder speaker power.

  The other is TFnF5. If I click on it, nothing happens and the function FN + F5 is still the TDspBtn.

  ------------------------

  My next prob is the FN + F8 combination. I installed the driver from wirlesshotkey and nothing happens if I press FN + F8
  Normally using this utility you can switch of Bluetooth for wireless connection by pressing Fn + F8. If Bluetooth is not available, it will turn on and outside wireless lan.

  Please help me!

  Greetings from the Germany

  Hello

  It is not easy to give you the right answer because this FN feature does not depend on a tool only. The fact is that several separate components must be installed correctly.
  On the Toshiba download page, I saw that there are two different models of the Portege R200. I don't know which you have, but for each of them you will find the document Instructions facilities with the exact order of installations.

  So what you need to do is to install all the drivers, tools and utilities following this order of installations.
  If all the components must be installed correctly. After doing this, all these processes are running in the background and you can use all the functions FN.

  The same situation is for the FN + F8.

• Question about the feature WLAN in Satellite M40x-119

  Hi all

  I have a problem with the network without wire/feature (?) in my laptop. Probably, I have drivers wrong with that, and I don't know what kind wireless device I. I lost my reboot CD :(
  How can I check what is there?

  BTW: when I try to connect wirelessly with information: 'turn on the wireless network device' with my knowledge, everything is on, but no doubt I'm wrong :(
  Any help? If you need more information please ask me.

  Thank you very much

  Make sure the switch without physical wire at the front (or side) is enabled.

  Check that the wireless adapter is enabled in the Device Manager

  Go to the section of the Toshiba Driver/Support Web site and select your model in the list, then download and install the latest driver for wireless LAN.

• A few questions about the feature Satellite A300D - 14 p

  I have the model Satellite A300D - 14 p a month. 2-year warranty. I have a few questions and ask for help and suggestions I have to do?

  * My quality of the camera * is VERY poor, with a lot of light on, I can get image quality generally ok. Inside, next to turned on the two options, night mode, or backlight compensation, I can hardly see my face, very dark and very bad quality. Second problem, it is a blue led light, it is annoying because half of the picture is always blue, somehow made light photo half which is always blue:(((j'ai utilisé modèle portable L300 série (moins cher que le mien) with the same device and that blue light, it works perfectly :()

  * Autonomy and start up Vista OS *? In little 1.5 hour energy saving mode? Surf train and nothing else... I asked Toshiba support here in Serbia in this respect and they told me that it is normal and measure the battery life (2,... h) by specifications, this is when my screen is off and computer do nothing? They also said that starting normal time for Vista OS is maybe more around 1.45 min?

  If I install win XP is it possible to get longer battery life?

  I have to go in service Toshiba or what?

  Thank you very much and sorry if I'm boring :)))

  Nikola

  Hay Nikola

  You are not boring at all and welcome to this forum.

  I don't know where to start. ;).

  I have Satellite A300-1LI in front of me and I use it about a month now. Startup time is very interesting theme and with a good configuration, you can optimize and make much shorter as with factory setting. Please read a very interesting thread about it under http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=134947
  Do the same with your Satellite and I hope that you will be satisfied.

  Battery operating time? I have to say that information about two hours are realistic and I can confirm that. The same thing on my Satellite. But to be honest for mobile computing, it's OK. I've changed several notebooks and just business laptop Tecra had to linger battery operation. What you can do is check the Toshiba support site and look for info on the more powerful battery. I don't know, but you can use the battery (Li-ion, 9 cell, 6000mAh).

  On cam, I can't say much. It works on my Satellite on OK and I am satisfied. OK quality is not the same as for integrated cam but good external webcams it's OK.
  If you are not satisfied with trying to speak with the nearest service or try to compare it with some other Satellite by your local dealer.

  If Nikola, if you have more questions please post again.

• Ask about the design of the system

  Hello

  I need to make a request that has the following requirements:

  1. The application begins with a screen that should be a list of say Supermarkets.I guess I must use ListField therefor (my assumption is correct?).
  2. When a user selects a supermarket, say KMart in the list, I want to show a list of departments of this supermarket.
  3. Select a Department from the list should show a list of products in the Department.
  4. Choose a product should show the details of the product.
  5. During all this navigation, I need to display a tab bar at the bottom of the screen. The tabs will be used to access the various features of the application such as the Search tab that can be used to search for a specific supermarket or a product. This tab bar must be visible at all times.
  6. I will use SqlLite as DB (wise decision or not?).

  So here's the scenario. Thanks for bearing with me so far. Now, here are the questions:

  • Can I move just a portion of the screen, i.e. the part that the list and not whole screen? I ask this question because I don't want the tab bar below to disappear no matter what.
  • Or, do I need to divide the screen into two frames, one for the bar tab at the bottom and one for the main content where lists will be displayed and whenever a list item are selected, I need to delete the current list and add the following list? Is this the right approach?

  If anyone has any suggestions as to how this problem should be addressed I can't wait you to read them.

  Much obliged.

  Hello

  My comments:

  1. the application starts with a display that should have a list of say Supermarkets.I guess I must use ListField therefor (my assumption is correct?).

  -> Yes, you can use listfield. I often use FlowFieldManagers with some fields extended to create another way to view information.

  2,3,4-> ok

  5. This can be obtained by adding your 'field of the tab' status (use setStatus on your screen).

  6. If you use sqllite you target users with OS 5.x, if that's the case is ok.

  With your questions:

  -> If you are using setStatus as I mentioned the tab bar used to disappear.

  If you want not the header disappear in some cases, use setTitle. using setTitle and setStatus your content will be in the middle. If you scroll the listfield title and status will remain in their place.

  Perhaps other developers have different ideas

• Ask about the definition of default printer

  Original title: printers

  I bought a HP printer/scanner base and it is recognized by all the drivers etc, this is not just a basic printer scanner wireless, but I have windows 8 and it won't let me set it as default printer, so I can't print, whats up?

  Hi Randy,

  I understand the frustration when things don't work as expected.

  1. What is the model of the Printer HP?

  2. do you get an error message when you try to set it as the default printer?

  I suggest you to try the step below and check if it helps.

  Method: Try to change the default printer value in the registry key and check if it helps.

  Registry warning: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: 322756

  How to back up and restore the registry in Windows: (http://support.microsoft.com/kb/322756/)

  un) Click Start.
  b) type regedit in start search and press enter.
  c) move to the location listed below.

  HKEY_CURRENT_USER\Software\Microsoft\Windows NT\CurrentVersion\Windows
  
  d) in the right column, you will find key device, change the value of your printer name.
  e) this is the format for example: "HP LaserJet 4250 PCL6, winspool, Ne03:

  f) right click on the value and click Rename, change the name of your printer.

  Hope this information is useful.

• Ask about the product recovery process

  Hello Mr./Mrs

  I'm about to start the recovery process of the product on my laptop, so I've read is that it formats all data on the hard drive. Is what it means if I have 2 hard drives (C & E drive) all on each of them will be erased or simply C drive only?

  If both drives will be erased so where can I restore my data disc E to continue the process?
  Thank you for your support.
  Your Tony

  Hello Tony

  It will be interesting to know what model of laptop do you have and how you want to perform the installation of recovery.

  If you use F8 and drive HARD recovery (on the new laptop models) installing the C partition will be deleted only.
  If you use the whole HARD drive recovery DVD will be erased and formatted.

• Ask about the warranty

  I decided to buy a Moto X 2013 Developer Edition (thanks to the unavailability of 32 GB 2nd generation here at home). I see that the phone is available in Amazon mentioning the term "" we guarantee ".

  Can anyone tell if the warranty will be really valid if from 3rd party site?

  Oh - guaranteed!

  The warranty is valid in the country where the phone was for sale. So if you buy a Europe-US version, you won't get warranty support. You must buy a version for sale in Europe.

  So, you could get it repaired, but only if you come to the United States to do so. We will not ship a phone repaired outside the United States.

  Hope this is clear, even though I know it's probably not what you wanted to hear.