Ask the printer properties caused the failure protection 0xc0000005 at the address of the function 0x7c91245f

Similar Questions

• Printer HP Laserjet installed - choose Properties causes the failure of protection

  Using Vista with a N 3500 HP color laserjet.  Worked fine for almost a year.  Then after an update of Windows - choose change properties in the printer driver causes a protection fault.  Cannot change the type of paper, hand feeding, color, copies etc.  Removed from the printer.  The most recent driver reinstalled on HP site.  The same problem.  Tried to change properties of Run as administrator, the printer properties, but most of the options are grayed out.  Saw a blog about the bad update HP printers, but can't find the article.

  Appreciate any help.

  Hi JRobinson1234,

  Please indicate the full error you receive, to better understand the issue.

  You can try the following steps:

  Step 1: Run the Fixit available in the link below:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

   

  Check whether the problem is resolved

   

  Step 2: Make sure that the printer is set as default.

  1. on the Windows taskbar, click the Start button, select Control Panel, and then click Printers. The Printers folder opens.

  2. look for a green check mark next to your printer. This check box indicates which product is the default printer for Windows.

   

  Step 3:  You can follow the steps mentioned in the link below

  Why can't I change the printer properties?

  http://Windows.Microsoft.com/en-us/Windows-Vista/why-cant-I-change-the-printer-properties

  You can check with HP to known problems

  http://welcome.HP.com/country/us/en/contact_us.html

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Printer properties cannot be displayed. The print spooler is not running.

  I followed the MS KB "file sharing and printers with different versions of Windows" for instructions on connecting my new Win 7 PC to several domestic XP PC in my network. However, once that I had on the right by clicking on the printer for XP to share, popup message "printer properties cannot be displayed. The coil of the printer does not work. This has happened even when clicking on the properties of the printer. I'm stuck now and need guidance on what to do. Thank you!

  Here are the steps of general network troubleshooting. Just cannot apply to your situation, so just take the bits that are. It may seem daunting, but if you follow the steps in the links and suggestions below calmly and consistently, you will have no difficulty to implement your sharing.

  Problems sharing files between computers on a network are usually caused by 1) a misconfigured firewall or a firewall neglected (including a dynamic firewall in a virtual private network); or (2) inadvertently run two firewalls such as the firewall of Windows and a third-party firewall. and/or (3) do not have accounts to the same users and passwords on all computers in the workgroup. (4) tries to create actions where the operating system does not.

  In Windows 7, go to control panel > everything in Control Panel > network and sharing Center. Click on "change the advanced sharing settings. You don't want to use the residential group unless you have all Windows 7 machines. If you do and you want to use the homegroup, see Windows 7 Help & Support. Otherwise, in sharing advanced:

  Discovery of plug in the network
  Open the files and printers sharing
  Turn on the sharing section Public folder sharing
  Plug the password protected sharing

  A. configure the firewall on all machines to allow traffic to local area network (LAN) as being approved. With the Windows Firewall, turning on window file sharing and printer as the above will take care of that for you. If you are not running a third-party firewall or you have an antivirus/security with its own firewall component program, then you're fine.  With a third-party firewall, I usually set up the allocation of LAN with an IP address range. E.g. would be 192.168.1.0 - 192.168.1.254. Obviously you would substitute your correct subnet. Refer to the safety of any third party program or the user forums for how to correctly configure its firewall. Do not run more than one firewall. DON'T STOP FIREWALLS; CONFIGURE THEM CORRECTLY.

  (B) to facilitate the Organization, put all computers in the same workgroup. This is done from the System applet in Control Panel, the computer name tab.

  C. create the counterpart of the user accounts and passwords on all machines. You do not need to be logged into the same account on all machines and assigned to each user account passwords can be different; accounts/passwords just need to exist and to match on all machines. DO NOT NEGLECT TO CREATE PASSWORDS, EVEN IF ONLY OF SIMPLE. If you want a machine to boot directly to the desktop (a particular user account) for convenience, you can do this:

  Start > Search box > type: netplwiz [Enter]
  Click continue (or provide an administrator password) when you are prompted by UAC

  Uncheck "users must enter a user name and password to use this computer". Select a user account to connect automatically by clicking on the account you want to highlight and press OK. Enter the password for this user account (when it exists) when you are prompted. Leave blank if there is no password (null).

  XP - set up Windows to automatically connect (MVP Ramesh) - http://windowsxp.mvps.org/Autologon.htm

  D. Si one or more of the computers on your network are XP Pro or Media Center, turn off Simple file sharing (Folder Options > view tab).

  E. create share as you wish. In Windows 7 I usually share the Desktop of the user and the Public directory.

  F. you have the job of file sharing (and tested by exchanging a file between machines), if you want to share a printer connected locally to one of your computers, share of this machine. Then go to the printer mftr Web site. and download the latest drivers for the correct system. Install them on the target machines. The printer must be collected during the installation procedure. If this isn't the case, install the drivers and then use the Add Printer Wizard. In some cases, printers must be installed as local printers, but it is outside this response. MS - MVP - Elephant Boy computers - don't panic!

• Dell v313 printer - my printer is not communicating with my computer - I need enable two-way communication in the printer properties

  My printer is not communicating with my computer. He always tells me to activate the two-way communication option in the printer properties dialog box.

  How can I do this?

  MichaelMcQuillar,

  Please check your virus protection and firewall. They seem to block communications from the printer.

  Rick

• What is the function of support biredirectional activate the tab of the printer properties ports?

  What is the function of support biredirectional activate the tab of the printer properties ports?

  Back in the day, the printers were an output device only when the computer would simply send your print job to the printer and it would print (or not).  Now printers 'reply' to your computer and notify you levels of ink and toner low, paper jams, termination of success/failure, etc.    Enable bidirectional support allows the printer to 'reply' to your computer.

  HTH,
  JW

• Ask to print, go to the Fax icon and I don't have Fax - Can t Print!

  Problem just started. When I ask to print the Fax icon in the taskbar and nothing prints not - I don't have Fax capabilities. I use Firefox for 0ver a year and this is the first time that this has happened. When I browse through Google or explore the function print is behaving normally. It is only through Firefox which is running no printing function. The problem is not with the printer, computer or other, just of Firefox browsers.

  Select your printer in the printer - name box. See the screenshot.

• Photosmart HP 7520: ip address for web services is not on the printer properties

  Printer is a HP Photosmart 7520, I have this printer is installed on computers laptops HP two and two are running Windows 7 Pro.  On one of the laptops (mine), when I click on devices and printers, and then right-click on my default printer that is the 7520, it has three tabs.  The third tab shows 'web services' and has an IP address for what should be the EWS page.  The property intellectual property which are listed there is an old IP address that has been recently changed.  What should I do to update that.  The fact that it is bad does not seem to affect what anyone.  The printer works perfectly to include web and eprint services.  What is also interesting is on my other laptop (of woman) which is identical to mine, the web services tab is not yet here when I click on the printer properties. I passed to the EWS page and checked the network tab.  All right.  I went to the Assistant printer HP, clicked on utilities and used the IP update.

  Hey @DennyC,

  Personally, I believe that if it ain't broke, don't fix it. If everything works as it should, that you have tested and it does, there is not need to change this list in the frame. If you want to try it though, with the exception of my first two ideas you already have tried, uninstall and install the printer is all I can think about. Right click on the printer in devices and printers, and then delete or remove. Run the HP print and doctor Scan to install the printer and check the settings.

  See you soon!

• "Printer properties cannot be displayed. The print spooler service is not running. "(even when it works)

  When I click with the right button on a particular printer and try to view the properties of it, I get the following message:

  Printer properties cannot be displayed.  The print spooler service is not running

  It is, it is run as go to-> Services administrative tools in the Control Panel checks.

  One of the 'printers', I installed is "send to OneNote 2007".  I can click right on this very well - just not this another printer. I'd be able to do if the print spooler is not running?

  Indeed, if I turn off the print spooler, * all * printer in "Printers and faxes" disappear.  So the fact that I'm still see them first place suggests to me that the printer spooler is running.

  I posted this on Microsoft.public.windowsxp.general a while ago and someone suggested that I visit this site .  Problem is C:\WINDOWS\system32\spool\PRINTERS is empty.  It is empty when the print spooler is running and it is empty when it is not.

  Also, I was unable to install KB896423 since I am running SP3.  Try to install he did the following:

  Setup has detected that the version of Service Pack for this system is newer than the update you are applying.

  There is no need to install this update.

  The printer is a "local printer attached to this computer" connected via a "Standard TCP/IP Port".  Personally, I think such a printer should be called "a network printer or a printer attached to another computer", but that is the terminology used by the "Add Printer Wizard".

  Hello terrafrost,.

  Thank you for visiting the Microsoft answers community.

  What is the model number of the printer that you are using?

  Printing a "Standard TCP/IP Port, is used for a printer that is directly connected to a network, not on your local system.

  I would try to uninstall your printer and reinstall your printer.

  Hope this helps Chris.H
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• HP Laserjet M401A: HP Laserjet M401A not will mark the different paper size and tray on the printer properties

  Hello all.

  I have a custom paper size in question and the plateau in the properties of this printer.

  I would like to implement three different printers on the same port, to print directly on a specific tray (without going into the properties of the printer and select the appropriate tray and size).

  I have this printer with the additional third tray.

  I implemented the A4 in the Tray 1 (bypass), a custom size in tray 2 and 3 on the printer.

  When I enter the printer PROPERTIES I want to set up the paper size in tray 2 and 3 value. No question.

  The only sizes I see is 13 x 8, a4, a5, letter, legal and so on (there are choices may 7).

  So, I choose NON SPECIFIC.

  When I go to printer PREFERENCES, I can set up my custom paper size.

  But when I choose my custom paper size, tray 2 and 3 go away and I can choose only bypass or Tray 1.

  If I attributed to A5 (for example) the tray 2 and 3 re - appear.

  How is that possible? where I'm wrong?

  Thank you very much, any help would be appreciated.

  See you soon,.

  Luca.

  Hi Luca,

  That is expected, custom paper sizes are supported only on tray 1.

  Tray 2 and 3 are supported specific sizes of paper.

  You my find graphics of the following as a reference, it lists a paaper supported size for each tray:

  http://h20566.www2.HP.com/hpsc/doc/public/display?sp4ts.Oid=5096252&docid=emr_na-c03303423&docLocale=en_US

  Kind regards

  Shlomi

• my hp deskjet3050all-one j610 when asked to print a page as it is cancelled by the user

  my hp deskjet3050all-one j610 when asked to print a page as it is cancelled by the user

  Hello

  I suggest you try to run this under fixit and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  It will be useful.

• I try to print, get the error message "Please enable setting"Enable bidirectional communication"in the printer properties dialog box.

  When I tried to print I got the message (please turn on the setting "enable bidirectional Communication" in the printer properties dialog box ") but I need to know how to do this.

  On the start menu, menu on the side right should be a button devices and printers, which will bring you to the page printers. There you can find your printer and right click on it and select Properties. This would be the place to enable two-way communication, but beyond that, I can't help you as I don't know what would the Properties window for your printer.

• Print button to print the page 10 to the dialog asking the user how many times to print page 10

  Hi all

  Want javascript to attach to a button that does the following: -.

  ask the user in the dialog box how many copies of page 10, they wish to print.

  Seems easy hmmm not to me... Unfortunately.

  If this cannot be done is is it possible to have page 10 selected in the dialog box for normal printing on a button... which brings up the print dialog box and all you have to do is select the number of copies.

  Thanks in advance

  Stephen

  You can use this code to do this:

  var copies = Number(app.response("How many times do you want to print page 10?","",""));
  if (!isNaN(copies) && copies>0) {
      var pp = this.getPrintParams();
      pp.firstPage = 9;
      pp.lastPage = 9;
      pp.NumCopies = copies;
      this.print(pp);
  }
  

• Common cause of failure of the Mirage server in clustered environment and how customers will be switched to the other server in a cluster

  Hello

  Can someone share me information about common cause of failure of the Mirage server in clustered environment.

  And how customers will be switched to the other server in a cluster to continue their operations from the server failed.

  Kind regards

  C Bathesha

  In general, Mirage servers are not lacking. It is very rare (and not, for example, to problems of storage or endpoitns, which are more common).

  May raise problems of overload, memory or hardware malfunction too little.

  After that you make server standard troubleshooting (the etc system event log), you must file a Service request by VMware.

• When you try to print to get address of 0x9ab41f function message caused a protection fault. (code 0xc0000005 exception)

  Original title: address of the 0x9ab41f function caused a protection fault.

  When I try to select preferences for my Canon MG6150 when you print a word document, the screen freezes after posting a panel with:

  Address of the 0x9ab41f function caused a protection fault. (code 0xc0000005 exception). The application property sheet pages may not work properly.

  I have to reboot to unlock the computer.

  Tried reloading the software canon and windows 7, but still no joy have the same failure anyone can help me fix this please?

  Hello

   

  Welcome to the Microsoft community!

  When you try to print a word document, you get the message as the address of the function 0x9ab41f caused a protection fault. (code 0xc0000005 exception). The application property sheet pages may not work properly.

  To help you better, we need more information.

  Is the issue limited to word document or it occurs with other documents as well?

  To work with the question, I would say that you are running the printer troubleshooter.

  Visit the site:

  Open the printer Troubleshooter

  http://Windows.Microsoft.com/en-in/Windows7/open-the-printer-Troubleshooter

  You can also consult the site:

  Why can I not print?

  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print

  I hope this helps. If you need assistance or if you have problems of Windows in the future, let us know and we would be happy to help you.

• Automated for the function name print OR-report

  Hello

  I use NEITHER-report, using the function NIReport_Print, I noticed that I still need to choose my file name.

  I want to put a var lets say:

  reportFileName Char [256];

  in the app, I'll put reportFileName and I want the report to save automatically to a folder using the file name, it is possible using EITHER report?

  I searched a function to do, as we have excellent report but I could not find...

  Hello

  I think you are trying to print to a PDF printer.

  In this case, it's the PDF printer asking for the directory and file name to save the PDF file, no report - NOR.

  NEITHER report could not save the report as a file by itself.

  You must find a PDF printer, which has a kind of automation.

  Personally, I use BullZip PDF Printer that allows you to change the settings via the command line parameters.

  Hope this helps,