aspect ratio of Mozilla is not good

After changing my windows, the aspect ratio of Mozilla is not good (the letters are too small and the page is ok or letters are ok and the too big pages - added below images). Before changing the windows, everything was fine. It seems as if my screen is too small to Mozilla, although the proportions of all the other programs is fine. I tried to Zoom in and out the page and the letters, but nothing helped.

It seems that the problem was in the drivers for my graphics card. Thank you very much for trying to help, I appreciate it a lot!

Tags: Firefox

Similar Questions

  • aspect ratio of false drawing in Windows media center

    Hello

    I was viewing and recording of digital television live in Australia on my Acer 6920 (built-in tuner is AVerMedia A309 minicards, DVB - T) and outside of never being able to download tv program guide information - I really don't like that much to this topic - everything was very good and a picture quality and report l / h have been correct , until mid-April 2012.  I went foreign 3 months and are back in Australia, connected my computer to an antenna and now the proportions of photo is wrong: it should be 16:9 full but now is extending laterally a 4:3 image to fill the 16:9 from my computer screen.  I took a screenshot but don't know how to set or view here.
    My MWC and Vista version information: V.6.0.6002.18242 (vistasp2_gdr.100414 - 0533) with technology WMC.
    And by the way, even my old recorded tv files played in WMC are the evil aspect now BUT when the same files are read using WMP or WMM is the aspect is correct - no cropping on the sides and no stretch; full 16:9 picture is played as it is.  This leads me to guess that the problem is specific to the WMC and perhaps an update on vista in the last 90 days caused the problem?  This also means that the tv signal is not the problem; If it was the recorded files would play in the correct proportions but don't live tv would be displayed in the wrong aspect ratio.
    Thanks for your advice and suggestions.
    Sakina

    Hello

    Please follow the link:

    How can I change the appearance of Windows Media Center on my screen? :

    http://Windows.Microsoft.com/en-us/Windows7/how-do-I-change-the-way-Windows-Media-Center-looks-on-my-display

    Note: Also applies to the Windows Vista operating system.

    I hope this helps.

  • "Freeze frame" aspect ratio problems what I am doing wrong?

    I downloaded a video short test showing my camera in the mirror.

    The video camera is a Sony HDR-CX320E (the ' E' for Europe)

    The camera settings were;

    Record = HQ Standard

    Frame rate = 50i

    HD / MP4 Standard = HD

    X - V color = WE

    PE9 project settings have been set to

    PAL (I'm in the United Kingdom)

    AVCHD

    1080i 25

    When I get media and drag it to the timeline PE9 is happy with it, I did not ask if I want to change the project settings.

    So far so good...Untitled-1.jpg

    In the first screen clip above, you will see the skin round my camaraas seen in the mirror lens.

    Then, below, I took a "freeze frame" wink as usual and checked (checked) the "Edit in Photoshop after insertion of" box.

    Untitled-2.jpg

    And once again, supra, it is very well... well...

    Untitled-3.jpg

    Above, what the "Freeze frame" resembles the lime of time, it seems quite normal.

    But as you know when you ask the retouching in Photoshop Elements image opens immediately in the stills of edition

    photoshop image test_FF_2.jpg

    Above, this is the problem that I get.

    This is how I see the image in Photoshop Elements

    The proportions of the image changed makes taxable to any convenient mounting.

    If I change the image, the aspect ratio returned to normal when the image is visible in the lime time and main display.

    I tried to make the "freeze frame" image before calling so that it can be edited in Photoshop, but which made no difference.

    Moreover, the above project and camera settings work fine in all other respects and if I add graphics they are in the right position when I download my videos on YouTube (I download on YouTube using the 1920 X 1080 HD, otherwise the graphics are misplaced)

    So what I am doing wrong guys?

    Kind regards... Andy

    Andy,

    Thanks for the follow up messages.

    According to the instructions of the SG... This should work for you with your description of your workflow

    a. project Preset and Source Media... HD 1440 x 1080 anamorphic 16:9

    b with the video on the timeline, the share/computer science/Image and the preset group JPEG HD 1920 x 1080.

    If you import that jpg 1920 x 1080 16:9 in a project from Photoshop Elements or look in the viewer computer, it should present only 1920 x 1080 16:9

    I have Photoshop Elements 9 and Premiere Elements 9.0/9.0.1 and road found the road.

    What is the status on your passage at 1920 x 1080 as a way of taking your camera so that you will avoid this kind of problem if you do a lot of frozen images and want to use the integration of the first elements Photoshop Elements to edit these frozen images.

    Looking forward to your results.

    RTA

  • pixel aspect ratio problem facing!

    Hey everybody:

    I'm not very professional with photoshop. Currently I use ps cs5...

    I want to know that is there any solution for my problem:

    I am a graphic designer for the frame, I have to work pixel by pixel that is why I have to work in grid, made what I write below to understand my probem, please!

    I'm assuming that the use of your CS5...

    CTRL + o (open any image file) >

    What go to VIEW > SHOW > GRID

    photo to zoom stop zoom...

    What go to VIEW > PIXEL ASPECT RATIO > COUSTOM ASPECT RATIO > give a FACTOR of 0.75 (it will shrink the pic).

    take the pencil tool (choose any color) and try to work in a single pixel wo... He never take 1 pixel... .i must work in a single pixel.

    Please help me in this. some kind of hack / scripting / good / get work in a single pixel will be appreciated!

    U can find me irritating, but please do it for me...

    .

    Best regards

    SALMAN AZIZ

    To make your pencil tool are what attract 1pixel, follow these steps:

    • In your pencil tool, click the selector of predefined on the menu bar shape superior
    • In the predefined default settings, scroll to the bottom and you will see a brush 'Star 14px.
    • What to choose, change the size at 1px
    • Draw now
    • Your pencil tool will give you exactly 1px padding
  • How to create a new my sign? new update because not good very uncomfortable

    How to create a new my sign? new update because not good very uncomfortable

    Have a look here: Restorer of Classic https://addons.mozilla.org/en-US/firefox/addon/classicthemerestorer/ theme

  • Aspect ratio 4:3 on serious DVDs

    My HP laptop (with Windows 7) Windows media player and HP DVD play DVD playback programs.  Whenever I try to read some DVDs which are 'copies burned"(who play in a regular DVD player as long as you can change the aspect ratio) always liked the 16:9 ratio in a 4:3 ratio.  No the case in all the settings for either the Windows media player or the settings of 'HP DVD Play' lets just set the settings for playback of 16:9.  I got into arguments with my friend who burns the DVD for me because he says I have to update the computer online, but I can't find anything.  I toild him he made the wrong DVD because he burned a few movies to a reading of 4:3 for his TV, but said it should play back fine on my player... Yes good.  Mind you, it isn't just computer tech saavy, Burns, and copy DVD from a DVD burner drive.  Some movies, it gives me reading back perfectly, others, where my question, just to play in this press (left and right bars), 4:3 format.  Its driving me crazy.  Y at - it an update can change the image format in this situation?  Is there something my friend done badly in these Burns of his?

    Any help with this would be wonderful.

    Hello capecosta,

    Try the following and see if it helps.
    On the start menu, click with the right button on the Media Center and select Properties. Tab shortcut, in the target, add "/ widescreen ' for what is already there for example"%SystemRoot%\ehome\ehshell.exe /widescreen ".

    Reopen Media Center and it should load in 16 / 9.

    Please reply back and let us know if this can help.

    Thank you

    Marilyn
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think

  • A customer asks to aspect ratio of 4:1. Need advice

    Aspect ratio of 4:1 ask one of my clients. Can I get 16 x 9 and convert the final deliverable in 4 / 1 or pan & scan cropping in the body of the CP, or is - that something is what a relay station would have to do? Since then, I don't think that there is a 4:1 guide in my Sony F5 or FS7, a temporary mat should be placed on the frame reference monitor? Any advice would be helpful.

    You really don't want to do it this way. He crushed him!

    I recommend that you create a new sequence in the ratio 4:1 1920 X 480 and simply drag your 4K video on it. The ladder to the bottom with the help of the scale parameter of the motion effect to get an idea of what it looks like and how you want to resize it back up or not at all.

    What you could do is first use a sequence of 1920 X 1080 and put a top title that has a hole in the middle which is 1920 X 480. Make this title about 25% opaque so you can see what you're doing. After graduating he looks inside the hole 1920 X 480, then she nests in a sequence of 1920 X 480. You can then export this sequence quite easily.

  • Aspect ratio for display on PC vs TV

    I have "he's try to make it as short and clear as I can.

    Use of first Elements 11.

    I mainly work with digitized clips of old VHS tapes.  I burned tonight, a project that seems very well when I edit.   Play on WMP, VLC, it displays correctly - 4:3 (with black bars on both sides - it's just the way it works).   But when I try to play from a media player on a 16:9 TV that we have all of these days, the aspect ratio will turn off.   My drive is set to 'Normal' which is 4:3 - The TV is 'normal', but the image is crushed, as it is 16:9 - he is not 4:3 with black bars any size of image, I put the TV.

    Looking at my project settings, they are 720 x 480 - NTSC DV editing mode.   The pixel format is D1/DV NTSC (. 9091).   When I pulled in my clips add media, I chose '' from files and Photos.    Should I chose 'camera DVD or computer drive' instead?    I remember that I needed to do in the 7 EP, but given that I just upgraded my PC & software, I've already forgotten.   Would be to make a 'film' and conforms to the square Pixels (1.0) correct this problem?

    Thank you!

    Check your TV settings. You have configured in 16 x 9 or Zoom. Set it to 4:3 or a set of program and it will display your video correctly.

    It's your TV (or disk drive or media) which is interpretting the video in this way. From what you describe, it is not the video file itself.

  • Imported from FCP sequence bad aspect ratio

    I'm an experienced user reasonably Final Cut now intending to migrate to first (leaving the sinking ship?) Thus, at the present time, I try to import projects under the FCP in first using XML.

    The result of a fairly advanced project and large-scale has been disastrous losses, so I decided to start with a much smaller project, which contains a single sequence in the same format as the media, clips of 1080p25 HDV 20 or more and a handful of files audio wav. The result is better, but there are two problems I encountered:

    1 when I opened the sequence in the timeline the aspect ratio, which should be 16:9 is piled up into something more like 4:3. A clip of the opening of the tray in the source monitor does not have this effect, but I can't work out how to correct the change of proportions when the sequence plays in the program monitor. -Any tips?

    2. the icons of audio file of the project imported in first are not related. When I try to reconnect them, first says he can not due to an "error of the header. -Any clue of what it means and why it should be?

    Thank you.

    Right click on the video clips in the project window.

    Go to edit/interpreter footage and assign HD anamorphic 1.33.

    Don't know how to fix the audio.

  • CS4: Resize raw images and maintain the aspect ratio

    I have a few images in full HD 1920 x 1088 or what it is, and I need to put it in a film where everything is in the resolution 1040 x 584, is it possible to reduce the resolution while keeping the proportions? All files are. MOV that I like to keep, but if it's the right size. AVI, that's fine too.

    When I try to export a single clip on first, the aspect ratio is lost and I've tried several programs of video conversion in the last two days, none worked for various reasons, the resolution that I needed was not available, would not work the file after conversion, first does not recognize the file, the aspect ratio has been lost etc.

    Can someone help me out here please?

    Use the option to scale the motion effect.

  • CS5 Pixel Aspect Ratio problems...

    Hi all

    I am working on porting over an importing existing Windows .mov file to Mac while also improving it to CS4 CS5 (and also riding in the creation of a library of files QuickTime 64 bit handwritten management to start, Ouch).

    In my test class, I have problems with some 1920 x 1080 .mov files. Some files of 1920 x 1080 I imported correctly, some of the files I imported with the wrong aspect ratio. I checked the two files should be displayed using square pixels and have checked also when the selector is sent which called (SDKGetInfo8) I'll put what follows for * all * the above test files:

    SDKFileInfo8-> vidInfo.pixelAspectNum = 1
    SDKFileInfo8-> vidInfo.pixelAspectDen = 1

    I bought it online using SDKGetInfo8 () and tense and no strained clips seem to give exact same traces through this function. However, files that are imported with the wrong aspect ratio, of course, listen to samples in a long format. Also, in the information of the location of the Source region, when the * extended * clips are selected is the information that is provided to these clips:

    NameOfTheStretchedClip.mov
    Video, 1920 x 1080 (1.7778)
    00:00:9:13, 23.976 fps
    etc...

    For clips that are not stretched, (1.7778) is (1.0). I'm not the greatest expert on the actual use of the first, so I can assume given the displayed values and the respective Visual result clips when you preview this value appears in the user interface is the format of the pixels and not the ratio of the image as the clip with (1.7778) is stretched and the clip (1.0) is not , but both are 1920 x 1080 videos. What I suspect is that 1920/1080.0 is 1.7778 and so somewhere for the clips that are stretching the pixelAspect ratio values seem to be derived using the dimensions in pixels and not the vidInfo.pixelAspectNum and vidInfo.pixelAspectDen values that are explicitly set to "1" as shown above.

    So my question is, apart from the SDKGetInfo8() layout the following values:
    SDKFileInfo8-> vidInfo.pixelAspectNum = 1
    SDKFileInfo8-> vidInfo.pixelAspectDen = 1
    Where can we pixelAspect values are supposed to prepare you?

    You can also:
    -In what other selector calls * CAN * pixel aspect ratio get ready? As I said, I'm porting of existing code, so maybe that these values are preparing elsewhere that I am currently unable to find.
    -Are there any setting that could get attached to the import of a file that said to derive the format of pixels the pixel dimensions that might get triggered for the clips that are imported as lie?

    Thanks in advance for any help!
    Josh

    Hi Josh,.

    > Where are stored the XMP metadata in a QuickTime .mov?

    This documentation contains descriptions of the specific method of storage of XMP file format:

    http://www.Adobe.com/devnet/XMP/PDFs/XMPSpecificationPart3.PDF

    QuickTime is described in section 2.2.4.

    I guess that this file with the 1.78 BY adjustment to its XMP had been changed manually somewhere along the line in Premiere Pro or a bridge and is not really a valid test case.  I would like to know if you find a way to produce using a real workflow.

    The fact that the file with NOMINAL 1.78 is showing that 1.0 BY when the time base is 24000 / 1001 is technically incorrect.  Maybe our importer knows that there is no such thing (at least that I know) like a 1920 x 1080 with 1.78 NORMAL video, so it sets properly, while missing the 23976 / 1000 cases.  But it is technically incorrect because the IRON must be completely flexible for future formats.  Still, I would imagine it is really a problem, an end user will hit, is it?

    Kind regards

    Zac

  • Can not good press the mouse on the name of the file and get the option of e-mail

    Can not good press the mouse on the name of the file and get the option of e-mail

    Hello! If I understand your question, you want to right-click on a file and attach it in Mail. To do this, click on the file with two fingers on the touchpad, or control + click on the file, select 'Share', then 'mail '.

    I hope this helps!

  • My e-mail address is VERY slow and crashes when I click on a message - rpet Mozilla does not. How can I fix it?

    My account email is VERY slow, when I click it it says Mozilla does not.
    It takes anywhere from 30 seconds to several minutes to open a new message or other messages.

    My other account works fine. What can I do to Fix this?
    

    Start * Windows * safe mode with active network
    -win8 http://windows.microsoft.com/en-us/windows-8/windows-startup-settings-safe-mode
    -win7 http://windows.microsoft.com/en-us/windows/start-computer-safe-mode#start-computer-safe-mode=windows-7
    - Http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/boot_failsafe.mspx XP

    Always in Windows safe mode, start thunderbird in safe mode
    - http://support.mozillamessaging.com/en-US/kb/safe-mode

    Problem disappear?
    Just reply to inform us of the results.

  • Display the Browse on Firefox is not good

    I am using a navigation button in my HTML, workng is fine, but on firefox-30 view of my button browse is not good, can someone help me to fix it in my code?

    Is it possible that this field is 'necessary' and what is called by a rule for admission: required in your CSS? This is not new in Firefox 30, but perhaps it was twisted (there are hundreds of variations in each version...). Otherwise, it is hard to imagine why you'd have a ring after using the control and not before.

  • Not good with 2 recovery cd recovery OS?

    During an installation of audiocatalyst, I have a problem with, and then the entire system failed not woork correctly. Especially could not watch the monitor for 4 to 6 minutes more and you get headaches and the eyes are tears to shed. Then I start the installation with the format of the system restore CD BUT THE PROBLEM REMAINS THE SAME
    How can I solve this problem?
    That's the problem of not good reading dvd - rom?
    This is a problem with the HARD drive?
    This is a problem with the software on cd? (ever, I had a problem with, why now)...
    Can anyone hepl solve me before throwing it
    It's a SATELLITE 1950 S902

    Hello

    Looks like you have a hardware problem on your screen. I think you need to take the laptop to the service.

    Good bye

Maybe you are looking for