Aspire 1810 t black screen after Windows 7 update

For a month or so, after a updates Windows 7, the next time I turn on my Aspire 1810 t., I get a black screen.

I refill 5 - 10 times play with various combinations of FN + F8, CTrl more Esc, etc. seem to rear brng.

Is there a better solution?

Read the Web to remove/replace the battery and made the tour?

Tags: Acer Laptops

Similar Questions

  • Aspire R7 572 G having a black screen after windows update 8.1. What should I do

    Hi all

    IM wondering, anyone having this problem before, Im of the problems with this black screen after startup, it happened yesterday I think microsoft needs to have updated some drivers rendering my black screen after startup. Initially, I thought it was my SSD, but it turns out that I can't get into Safe Mode.

    I read more info on this problem related to the other PC and try the preferred method of 'disabling' drivers Intel GMA HD. It worked, however, this means that the main driver is now reduced to a graphics card video standard with vram limited.

    I tried to roll back and even redownloading and reinstalling the intel driver in version VGA_Intel_9.18.10.3215. The blackscreen after boot have yet taken place. I missed something?

    This is an old version of Intel drivers.

    Try this, after uninstalling the old pilot Intel:

    http://global-download.Acer.com/GDFiles/driver/VGA/VGA_Intel_10.18.10.3316_W81x64_A.zip?acerid=63519...

  • At the end of the factory restore, but black screen after "Windows has set up the computer.

    The model in question is VC863AA #UUW

    I want to get back the computer to the factory condition, so I rebooted and you press F11. Everything went exactly like this: http://support.hp.com/us-en/document/c00814731#N72 (chapter "Start a restore from the hard drive and the computer is off")...

    .. until step 10, which States:

    "The computer restarts and continues in the installation of Windows. Complete the configuration screens and wait until the computer finishes the installation program. "Then turn off the computer, reconnect all devices and turn on the computer.

    Yes, the computer restarts. She continues in the Windows installation (it says "medan windows konfigurerar datorn Vanta", which means roughly "Please wait while Windows configures the computer"). After that which was for about 5-10 minutes, the text disappears and the computer restarts by itself.

    After that, he gives a normal load Windows Vista bar and after that black screen. It seems to be a little bit alive but jammed somehow. If I let it be for several hours, he goes to the standby mode. If I wake up, he still won't. I can plug a USB another keyboard and he will make some access to hard drive (load a driver probably). I can press the sleep button and it will go into sleep mode. But if I press the power button / stop briefly, it will NOT stop.

    So finally, after several hours I forced to shut down (by pressing the power button / stop longer). When I start it, it goes back to behave as explained in the previous paragraph.

    If I press F8 during startup and select Safe mode, it goes in safe mode and I get dialogue indicating in Finnish:

    «Asenna Windows: Windows ei voi suorittaa vikasietotilassa asennusta.» See devam fenetresdans asennusta uudelleen tietokoneen kaynnistamalla. »

    Rough translation:

    "Installation of Windows: Windows cannot complete installation in safe mode." "You can continue the installation by restarting the computer.

    If I restart the computer, it goes back to the black screen after the windows loading bar.

    This suggests that there is something in the installation of Windows who jams it.

    I can install Windows Vista from a Vista DVD, but then I can't use the software included with the computer. (App States installation cannot install on a machine that is unauthorized, then of course they are looking for some OEM HP things.)

    Any suggestions on how to fix jam that continues with installing Recovery Windows or how to install the software on a normal Vista would be very appreciated.

    I solved the problem. Good thing I didn't order the restore disks, because that would not have solved the problem.

    I decided to post it because I don't know there will be others who have HP Pavilion Elite m9754sc and will have to face this problem of a black screen after the restoration.

    The fact is that the restore worked perfectly, but in this display card driver is buggy and it causes the screen to go black.

    I thought that what I installed fresh Vista which worked until I installed the driver from the recovery partition display. I tried VGA, outputs HDMI and DVI on the factory installed GeForce GT220 and none worked.

    A defective display driver should normally be no problem we could go in safe mode and fix it to the it. But as with the recovery goes to pre install state (ask what language to use etc.), safe mode does not work.

    So the solution is to unlock the display of the motherboard connectors and remove the factory installed GeForce GT220. Once the recovery and installation of Windows is finished using the graphics card integrated motherboards, you can reconnect the GeForce GT220 and get a updated driver with safe mode.

  • G62 b90 - ev: black screen after Windows loading

    Hello everyone, as you can see by the title I get black screen after loading of Windows at the same time as everything else works (hard drive of fans lights and sounds). I've tried several things, I read on troubleshooting thread, memory, diagnosis, diagnosis of hard drive, delete and change put the Rams, disconnect the battery and ac and keep the power button for 30secs hurry the ac without the battery but nothing. I also tried to use a monitor with hdmi cable but I get a blue screen when I try with the monitor. Also what happens during a format so I can't even through safe mode. IM really waiting for your answers and in the hope of a solution. Thanks in advance!

    Just because you use the key F11 to restore to factory does not mean that the recovery partition itself is not altered.

    Suggest you try instead the recovery discs or take it to the shop for advanced diagnostics.

  • Laptop black screens after the latest updates of windows... wil not booting in SafeMode (black screen).

    Windows Vista 64-bit... Black laptop after the latest updates... windows screens will not boot into SafeMode again black screens.

    Hello

    I would suggest trying the following methods and check if it helps.


    Method 1:

    Try the steps in the following Microsoft article and check if it helps.

    Windows Vista or Windows 7 unbootable, and the Startup Repair tool does not resolve the problem:

    http://support.Microsoft.com/kb/934540

    Method 2:
    You can refer to the link below and check the drive for errors:
    http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errors

    Warning: when running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost.

    If the methods mentioned above do not solve the problem, then it would be best to contact the manufacturer of the computer.

    For more information, see the following Microsoft article and check if that helps.


    Why my screen is black when I start Windows 7? (Applies to Windows vista)

    http://Windows.Microsoft.com/en-us/Windows7/why-is-my-screen-black-when-i-start-Windows-7

    Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article: back up the registry in Windows Vista

  • Envy 17 jump notion j100: black screen after a few updates

    Need help.

    After a few updates, had a blue screen after Windows booted reset. Restart - black the next screen.

    Tried to connect to the other screen - does not not (f4)

    memory, hard drive out - nothing

    hard reset - nothing

    Win + b and start - nothing

    on the power on lock shift - 2 led flashes pause, pause 2 flashes and etc.

    looks like bios, what to do?

    Any solution?

    Hey @serhiox,

    If these steps did not work, try the rest of the other measures in the document to restore the BIOS and update the BIOS if Windows does not start a section of the document updating the BIOS .

    If you can get into the BIOS at all, you can try to reload the default settings? To reload the factory-installed BIOS configuration settings, perform the following steps:

    1. In the BIOS Setup utility, select the tab out.

    2. Select message Load Setup Defaults.

    3. Select Save Changes and Exit (pressing F5 and the Enter key will also load default configuration).

    4. Press ESC, then press Enter to exit the installation program.

    Please let me know how each step works for you.

    Thank you

  • Blue screen after windows xp update...

    I got the blue screen now well documented after windows xp update. I'm away on business and so unable to make my records at home. My question is without the disk is there a way I can fix it the laptop? Microsoft took 3 days to order discs and now tell me it might take 7 to 10 days so that they arrive. Not really customer service.

    Anyone has any ideas, is there something that you can download? or is there a fix on the Web site?

    Thank you

    What application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?

    A (another) Norton or McAfee application has already been installed on the computer (for example, a free trial version which is preinstalled when you bought it)?

    =================================

    Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

    ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • NB100 implemented black screen after Windows (with bar)

    Hello
    I have laptop nb100.

    My Windows XP is not loading (learn how to Windows with screen bar, then it blocks black).

    I thought just re-intall Windows XP, so I tranfered my WinXP to .iso format and placed on my formatted USB (XP and .iso seem well).

    I changed my computer to boot from USB and f12 on start up and it goes to the USB port, no probs. Then, I get a black screen with these choices:

    1, text-mode Setup (flash start again after)
    2nd, continuous mode GUI installation, setup + 1 start windows
    ---> DEBUGGING Options. Try if you have the hal.dll error<>
    Debug the rdisk 1 2 boot partition
    Debug the rdisk 1 3 boot partition
    Debug the rdisk 1 4 boot partition
    Debug the rdisk 2 1 boot partition
    Debug the rdisk 2 2 boot partition
    Debug the 2 3 rdisk boot partition
    Debug the 2 4 rdisk boot partition

    Option: text-mode installation 1, (start to flash again after).
    kicks in a blue screen with the Windows installation
    wallpaper load some info
    then it crashes on Setup starts windows

    I have Win Xp SP2, was originally installed SP3, but can not find the drive (have to SP2 and 3) so I have Win XP SP2 through ISO then installed on usb (not sure if that is the question)

    All I want is to re - install the computer (no I have not re - install discs), so I thought it would be easier to re XP - install.

    Any assistance received very highly.

    Thanks in advance :)

    Hello

    > so I tranfered my WinXP in .iso format and put on my formatted USB key

    Sorry, man, but I did not understand how you have transferred it.

    I advise to get windows copy disk and USB drive to make a bootable usb drive to install windows.

    You can make a USB bootable in 2 ways:

    1. manually with the command prompts

    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=53324&TSTART=60

    2 automatically using programs such as WinSetupFromUSB or Novicorp WinToFlash

    http://myeeeguides.WordPress.com/2008/11/15/winsetupfromusb-install-Windows-XP-from-USB-flash-drive/

  • black screen after windows startup

    Hello

    I have hp g62 after windows startup, I got a black screen then I restart the pc in safe mode and then disable the graphics card can always turn off restarting the pc, it works but the graphics card
    Please help me for this problem.

    Hi ridha_bargaoui,

    Would you try to install the driver from the HP site and not the BOF the ATI Mobility site.

    Here is the link to the drivers PC laptop G62-b18SA, for the recommended drivers for your system.

    When I look at the spécifciations for your system, if shows that you have an Intel graphics card. HP G62-b18SA Notebook PC product specifications

    Once the page is displayed. Click on graphics and download and install the driver Intel.

    Failure then I suggest you do a recovery to factory.   Performing a recovery of system HP (Windows 7)

    You will receive a prompt during this process, to back up your personal files to avoid data loss. If you did not recently, I suggest you only do one now.

    Restore files that have been supported to the top using HP Recovery Manager (Windows 7)

    I hope this helps.

  • Black screen after Windows Update 8.1 in Dell Inspiron 15R 5537

    Hi guys,.

    Hello, I have updated my Dell Inspiron 15R laptop 5537 Windows 8 Pro to Windows Pro 8.1 by using the Application Store.

    After a wait of nearly 6 hours, update has been made and after the installation of Windows, display was black, cursor blinking... I checked in the Microsoft Web site, and I found that not only me and a lot of Dell customers are facing the same question. I luckily managed to start in safe mode and I uninstalled both of my video drivers and I'm back to my windows 8.1. After that I updated my video drivers as shown in the link below, always my screen turns off. If I had no other choice than the reset my pc to windows 8 pro.

    Driver video link: http://www.dell.com/support/drivers/us/en/19/DriverDetails/Product/inspiron-15r-5537?driverId=PWTRP&osCode=W864&fileId=3287401962&languageCode=en&categoryId=VI

    When I was checking for the latest version of the driver for Intel Graphics & AMD Radeon that supports windows 8.1, I am able to find a driver on the dell Web site.

    http://www.Dell.com/support/drivers/SG/en/sgdhs1/DriverDetails/product/Inspiron-17R-5737?driverId=6GGGM why it is not being updated in the list of corresponding product drivers... In fact I think that it is the fix. I'm not sure.

    If one has updated and I need technical support dell for this

    Hi guys,.

    After much research, I understand that is the problem because of the Intel video driver. There is a beta Intel video driver package that supports Windows 8.1. Try this update package and display your results. As I've already restored to windows 8. It will take at least 4 to 6 hours to update me the State. The link below is for Dell Inspiron 15R 5537 model.

    http://FTP.Dell.com/published/pages/Inspiron-15R-5537.html and install Intel HD Graphics Driver ver 10.18.10.3308 4400. You must follow the link because this driver is not yet downloaded in Dell drivers & downloads (referred in Dell Post)

  • Satellite C55-B5101 - black screen after Windows update

    Mobile received Christmas day (all new) Satellite C55-B5101, saves Windows update (formerly 8.1) by getting only now black screen... Not very in computers so if you know what please he dumb down for me! Thank you

    Hello.
    I'll post a similar problem with mine. Here is something I've read elsewhere that can solve yours.

    Unplug the cable from the main charger.
    Remove the battery if possible.
    Press and hold the power button for 1 minute.
    Leave battery and connect the cable.
    Turn on.

  • Windows Vista does not boot, black screen after "windows loading files...". »

    I have a laptop HP Pavilion dv2000, it came with windows vista, so I don't have a boot disk. When I try to start it, it will say "windows loading files...". "with a bar, once the bar is loaded it will say microsoft Corp. (with the copyright symbol) and another bar with a bar made up of three small bars of loading through it, once that is done, it will show a black screen. I have installed recent updates and I can't access the restore mode or security system.

    Hello

    The possible fix is the same that you can not boot the system currently.

    You need to make a computer repair/restore on another disc, borrow a friends Windows disk.
    or buy one from the manufacturer of the system. See the methods in BOLD above which also shows how
    a repair/recovery disk which is bootable.

    It may not be repairable by a user and the help of a real store of the computer (no leeks and peaks at)
    a BestBuy or other BigBox stores) or Support from HP is required.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • black screen after windows 8.1 update

    Hello. I updated my laptop to windows 8 to 8.1 and when it restarted it shows just a black screen. I restarted the computer and has executed a HP diagnostic test and got this reading: failure of intelligent control, Id: product rlh2tk-6jx75x-mfgjw1 id - b 60, 603: d1e80ua #aba. Help, please!

    lletram18 wrote:
    Hello. I updated my laptop to windows 8 to 8.1 and when it restarted it shows just a black screen. I restarted the computer and has executed a HP diagnostic test and got this reading: failure of intelligent control, Id: product rlh2tk-6jx75x-mfgjw1 id - b 60, 603: d1e80ua #aba. Help, please!

    Hello

    It indicates that your hard drive is facing iminent failure / failed.

    You need to replace the HARD drive, contact HP in your area for replacement, if you are covered by the warranty.

    Please also read the following article:

    Laptops HP - SMART disk error

    Its recommended that you back up all your files, programs on an external HARD disk or disks.

    If you have not created recovery disks yet, you can order a set of replacement recovery disks using the link below - it will reinstall the operating system, all required them drivers and almost all of the original software (the exception being often tests of MS Office).  They will also recreate all of the original scores, including the recovery Partition.

    Order HP recovery disks.

    Hope this solves your cpncern

    Thank you

    CLICK ON 'ACCEPT AS SOLUTION' TO HELP OTHERS WITH THE SAME PROBLEM *.

    CLICK ON BRAVO IF YOU LIKE MY ANSWER *.

  • Black screen after the computer updated

    My day was fine.  I had trouble getting my computer and printer to recognize each other, so I restarted my computer.  We are running Windows 8, I think.  It could be Windows 8.1.  Before it restarted, it finished installing some updates automatically.  When the computer is back to the top, I logged as usual.  Then got a black screen.  We rebooted and powered up the computer turned off several times, but can not further than black screen, unless I hit control, alt, delete and open Task Manager.  How can I fix it so I can use my computer again?

    Hi Nikki,

    I suggest you try the steps suggested by Scott Atk from the following link:
    http://answers.Microsoft.com/en-us/Windows/Forum/windows8_1-performance/black-screen-when-logging-into-Windows-80-or/93bb4530-C31C-4a2d-91e6-7ec2fc420379

    Post us the results after trying the steps above.

  • Qosmio F50-125 starts with black screen after a BIOS update

    Hello

    After instalation if new bios (v 2.0), computer sometimes starts with black screen.
    Even the first page that show press F2 to enter the bios is not displayed.

    You have someone older version of bios?
    So, I might try if it's the fault of it.

    Hello

    I think that the old BIOS will not help you because the laptop would have known that you try to update the BIOS to the older version, and it would break to the top of the procedure.
    In addition, the older BIOS is not available on the European driver Toshiba page.
    I think just only a Toshiba ASP had an older version of BIOS.

    Anyway, you said that sometimes happens.
    This means that this issue doesn't still persist
    Hmm. in this case, I recommend the default BIOS settings and update the driver display.

    Check it out!

Maybe you are looking for

  • Web pages does not appear

    I opened firefox and it looked like he briefly updated before you start. Homepage of google news did not come to the top and the address bar was empty, as the screen. I'll type a variety of web addresses in the address bar, and it seems to accept, bu

  • A50 DVD-RAM drive problem

    HelloWhen I try to burn at 8 x DVD-R, Nero says it can burn only at 2 x. It should normally 4 x.The drive is Mat * a DVD - RAM UJ - 820 s, FW version 1.0 I think the update of the firmware should fix it, but I can't find it anywhere. Adrian

  • HP pavilion 500-098: hp pavilion 500-098 graphics card upgrade

    I'm updating my video card present, a Radeon HD 8570 on my hp pavilion 500-098 office. I think it's a PCI card? It's because I'm trying to connect to my new monitor that requires a Display Port. I would appreciate any advice. Thank you

  • WPA is supported on MS 2100?

    I want a WPA for my SP 2100 but I (have only WEP) have not all drivers. Can you help me? I have an Intel Pro card but does not have the drivers of intel. THX

  • receive SMS from iPhone no problem

    I am a relatively new user of iPhone, but I noticed the few days I was not do check SMS from different sites, and I had to resort to receive calls.  It's not a big deal but not very practical, I hope someone can point me in the direction of something