Aspire 5560 stopped scrolling shortly after upgrading Windows 8 Pro

Similar Questions

• Help! -Acer Aspire all-in-one touch screen after upgrade Windows 8 Pro

  Hi all!

  This is a rather confusing questions and about * me off no end!  I know that some of you may have encountered this already and could have a potential solution?

  I have an Acer Aspire all-in-one, AZ5101 (Aspire Z5101), with 4 GB of RAM, etc..

  Since the Developer Preview of Windows 8 came out, I've been running Windows 8 perfectly.  I completely uninstalled (each time itself) and run the following:

  Windows 8 Developer Preview, 64-bit

  Windows 8 Preview of consumer, 64-bit

  Windows 8 Preview, 64-bit version

  In any case, on this PC worked perfectly - y INCLUSIVE of the TOUCH SCREEN.  I never had a problem.

  So far so good.  Then, they finally released updates Windows 8 Pro official licensed by download.  I bought the upgrade and downloaded.  Just like in * ALL * other cases, upgrade, I chose "keep nothing" of the old system (I never really got all the important data on here), and do the upgrade itself.

  After the upgrade was complete, and ALL Windows 8 Pro updates have been applied by Windows update, I have a system where the screen is clear and precise, everything works, and all devices in Device Manager, show the Greens well, it works fine - NO ERRORS.  HOWEVER - NO CONTACT!  No touch no screen function at all.  The screen now has this time as a standard monitor.

  I tried the driver Idéacom - no luck.  Anyone know (please? LOL) how to get the touch screen to work again?  Thank you very much!  I really appreciate any help you can give.  Microsoft technical support had NO idea and no reply emails from Acer! Laughing out loud

  Thanks again,

  Mike

  [edited to conform to the guidelines]

  Hello Mike

  I sent the pilot. Please test and advise.

  Kind regards

  FReeZA

• Cannot run Microsoft games after upgrading Windows 8 Pro

  After you have installed Windows 8 Pro I found my old Microsoft games (Solitaire, etc.) in the Windows.old file and used successfully and Favorites to the start menu.  The next day (after several Windows updates) they would not start in the start menu or from the executable file in the Windows.old folder. Tried to restore the (only) listed restore point but received a message that it cannot restore.  Tried the troubleshooting of compatibility without success. Uninstall the updates and restarted the resolution of compatibility issues, with the same results.  Have right click on executable, open properties and set to run in Windows 7 compatibility mode and run as Administrator without success.  How can I get my games to run on this POS?

  Hi Bruce,.

  Thanks for the reply.

  I suggest you check this question in another user account if you have more you can create a user account by following the steps in the link below.

  Creating a user account:

  http://Windows.Microsoft.com/en-GB/Windows/create-user-account#create-user-account=Windows-8

  Let us know the status of the issue.

• do not start cc2015 after upgrading Windows 10

  Do not start CC2015 after upgrading Windows 10!

  What can I do?

  A time CC2015 open and that thr program stop and closed.

  Can I read a text at the present time it is not possible.

  What can I do?

  Best regards

  Sandte

  Hi Brucgovn, thanks for the answer! Just sorted and came here to update the post.

  My method is similar, I just do the following:

  1. Go to C:\Program Files (x 86) \Adobe\Adobe Creative Cloud\CoreSyncExtension (this was the only file on the left, all others had been removed from the CreativeCloudCleaner use of the Adobe Creative Cloud cleaning tool to solve installation problems running
  2. I came across the problem trying to remove, so used Unlocker (Download Unlocker 1.9.2 - FileHippo.com) to unlock. Then deleted. It's explorer.exe using the process, which I think caused questions... the process is using the file
  3. Reinstalled and everything seems to work.

• Laptop HP Pavilion G6: after upgrade windows 10 - cannot detect wireless network

  Hello

  I upgraded my computer windows 10 laptop and it cannot detect a network.   The network adapters that appear in the Device Manager - controller Realtek PCI FE and Qualcomm-Atheros 802.11 AR9485 wifi adapter but I can't see any network.   I tried to install several drivers for Atheros without success.   I went back to windows 8.1 and network drivers works, I have upgraded to windows 10 back and I can't connect to wireless networks. I tried to update the drivers without success, uninstall and reinstall without success, I have alos tried the solution published on the microsoft unsuccessfully Web site: https://support.microsoft.com/en-us/kb/3084164

  I get an error message saying "the system was unable to find the key to register specified or the value '. '" I didn't install any software VPN or another, is there a solution to my problem?

  Hi there @tikaro23,

  Thank you for visiting the Forums HP's Support and welcome! It is an excellent site to find answers and ask questions. I understand that you have a problem with your Wi - Fi on the laptop HP Pavilion G6. You mentioned that you can't detect a wireless network.

  I did some research and found a great document for you called HP PC - troubleshooting wireless network and Internet.

  What happened with you have attempted to use the resolution of the problems mentioned in the link you so much?

  Have you tried to restore the BIOS?

  Have you tried to connect directly to the Modem/Router?

  Have you tried to boot mode safe?

  You can maneuver in Mode safe without problem?

  In my research, I also found a Support Forum on the page called Microsoft Community after upgrading Windows 8.1 for Windows 10, no wireless networks are available.

  There is a post of RajithR. Read his message in its entirety. (I also provided it below.)

  

  You said you tried to uninstall the driver. Are - what you got to do it in the order shown below?

  • Uninstall the driver of network card in Device Manager,
  • Reboot the laptop twice,
  • Reinstall the driver.

  Please use the HP Support Assistant, it will help with the software and drivers on your system at the time of purchase or this update of need.

  I know you said you tried to update the driver also. Have you tried to do it in the Device Manager in the order given below?

  • In the Device Manager
  • Click the network adapters to expand
  • Right-click on the network adapter family
  • Select software update of the driver
  • Choose search for automatically updating driver software.
  • Once the installation is complete, restart your laptop.

  Please follow the troubleshooting steps above and the re-post with the results, information from the above questions and HP Pavilion G6 Notebook PC model number.

  Thank you!

• 4340 proBook s: 4340 Probook s camara doesn't work anymore after upgrading WINDOWS 10

  Internal to the device doesn't work anymore after upgrading WINDOWS 10.

  All the drivers are up to date.

  I also downloaded the HP device drivers, but they offer several types.  I don't know what device to install.

  Also, I don't know what I can do.

  If someone can help me...?

  Thank you.

  The problem is resolved.

  Not in the way I wanted to (using the internal camera), but I bought an external camera.

  It works without any problem.

  So for me the problem is resolved.

  Thank you for given applications.

• I have a white screen after upgrade windows 8.1 on HP Pavilion 15-e092se

  I have the blank screen, mouse pointer only works after upgrade windows windows on HP Pavilion 15-e092se 8.1.

  Any help please.

  Yes you are right

  I had installed version of bad for graphics drivers intel so I opend laptop in safe mode and then deleted bad drivers after that I restarted the laptop, then it opened again, once disappeared from the blank screen I installed the latest version of the graphics drivers intel BIOS driver from following link:

  h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4158&LC=en&cc=us&DLC=en&sw_lang=&product=5394554#n402

  or you can download graphics drivers intel Web site to intel.

  Thank you

• When you try to install the update to upgrade windows 7 pro for windows ' 0 pro update windows seems even after 5-10 min in a loop with no sign of progress.

  * Original Title: windows update

  When you try to install the update to upgrade windows 7 pro for windows ' 0 pro update windows seems even after 5-10 min in a loop with no sign of progress.

  If anyone has any ideas on how it can be fixed please tell me

  Adam

  Please run the Windows Update Troubleshooter:
  http://go.Microsoft.com/?linkid=9830262

  Please provide the exact details of any problem it reports as not fixed.

• LR cc developmodule do not work after upgrade Windows 10

  after upgrade Windows 10 development screen freezes and I have to restart LR

  I love a piece all about the problem on the adobe Web site. I have a graphic processor of AMD radeon HD 7500 series and manually turn off the processor resolved the LR crashes.

  Thanks for the reactions

• How can I reinstall the CS6 after upgrading Windows Vista to Windows 10?

  How can I reinstall the CS6 after upgrading Windows Vista to Windows 10?

  Hello

  You can download the Photoshop CS 6 from the below mentioned link.

  Download Creative Suite 6 applications

  Thank you

• First Pro CC crashes on startup after upgrading Windows 8.1. All solutions?

  First Pro CC crashes on startup after upgrading Windows 8.1. All solutions?

  It was working fine until I updated my operating system. I tried to reinstall the software. I tried to update my graphic drivers.

  Hi P.Ava,

  Please also try to delete / disable any antivirus or firewall software installed on the system.

  Please update if it works.

  Thank you

  Sandeep

• Brightness changes not at all after upgrade windows 8.1.

  SVE14A27CXH

  Brightness only changes not at all after upgrade windows 8.1.

  Hi OT7!

  You can check this page to update the Vaio update software, you also try to turn off the screen brightness auto set by referring to this page.

  -Tim

  If my post answered your question, please mark it as "accept as a Solution.

• can I upgrade windows 2000 pro for Windows XP?

  can I upgrade windows 2000 pro for Windows XP?

  Hello

  Note Windows 2000 and Windows 2000 Professional can only be upgraded to Windows XP Professional. You cannot upgrade Windows 2000 to Windows XP Home Edition.

  "How to install or upgrade to Windows XP"

  http://support.Microsoft.com/kb/978307

  What specifications are needed for XP.

  "System requirements for Windows XP operating systems"

  http://support.Microsoft.com/kb/314865

  "Taken Windows XP supported upgrade paths"

  Microsoft Windows 2000 Professional >

  Windows XP Professional Retail (full) version
  Windows XP Professional Upgrade Version
  http://support.Microsoft.com/kb/292607
   
  "The upgrade to Windows XP Pro in Windows NT/2000"
  http://www.winsupersite.com/article/product-review/upgrading-to-Windows-XP-Pro-from-Windows-NT2000
   
  See you soon.

• Upgrade Windows 7 Pro 32 bit to Windows 7 Pro 64-bit

  I bought Windows 7 Pro (32 bit) a year ago and I got a disk, the disk of 32 bits, with my purchase. So my question is, how do I upgrade to a 64 bit version of Windows 7 Professional?

  I heard that there is a chance that I could have someone (Microsoft) send me a 64-bit version because they key will work for each version, but it sounds too good to be true... is it? Also, if I can't do this, can I have a 'Windows 7 Professional Upgrade' (64-bit) and boot from the DVD drive and improve it like that or you can during the passage of XP or Vista?
  I guess, the best/most simple/best way to upgrade Windows 7 Pro 32 to 64? Thank you!

  Copies of the retail of Windows 7 include 32-bit and 64-bit discs.  If the copy you purchased only had a dvd then you didn't buy a copy retail, but a copy of the OEM System Builder.  OEM copies do not allow the buyer to two versions of the software.  You can buy a copy at retail to upgrade license (or copy of full license of Windows 7 Professional).  Anytime Upgrade does NOT change from 32-bit to 64-bit.  You must use the retail to change between architectures.

  In the Windows 7 Professional 64 - bit 'Upgrade' disc is identical to the version of Windows 7 Pro 64 bit retail, or is there a difference?

  Yes, all the professional retail DVDs are the same.  This is the product key that determines was looking for, it's a full license or upgrade license.  No matter what type of product key, it is, the installed software is exactly the same Windows 7 Professional.

  "I heard that there is a chance that I could have someone (Microsoft) send me a 64-bit version because they key will work for both versions.

  What you have heard only related to Vista.  Editions of Vista retail below Ultimate contained only a 32 bit dvd and buyers had to order a dvd 64 bit Microsoft for a $10 shipping and handling.  Which does not apply to Windows 7.  All editions of the retail of Windows 7 include the two DVD.  Since you did not purchase a commercial version, Microsoft refer to the OEM for support.  Since there was no OEM, you are out of luck.  That's why an end-user should not buy OEM software directly.

• 6540 b after upgrade windows to windows 7 bi-ecrans has stopped working

  After upgrading my computer (6540 b) to windows 7 the bi-ecrans has stopped working. Help, please

  40043330 wrote:

  After upgrading my computer (6540 b) to windows 7 the bi-ecrans has stopped working. Help, please

  Hello

  You have installed all the necessary graphics drivers? Is there a graphics dedicated ATI Radeon HD, etc? If Yes, go to the ATI Control Center and have a look for dual monitor settings.