Aspire 5741 driver Optiarc DVD RW AD - 7585H

My Aspire 5741 with Windows 7 DVD player no longer works and I see in Device Manager there is a problem with the driver. I'm dissolving device as someone had suggested ndo rebooted but he has been unable to reinstall the driver.

I tried to locate the driver for him on the Acer Support website, but it is not listed. Why ACER does not provide the driver. In my view, this dvd player is manufactured by Sony, but their web site says to get the correct driver from the manufacturer of the product which is in this case Acer.

He '; s frustrating when they list a lot of other drivers, but not the dvd player.

I'd appreciate the help. Thank you.

Hello...

Before you remove and reinstall the device CD drive, you can remove the filter upper and lower registry to resolve the problem.

Click Start, then select run.

Type regedit in the run dialog box, and then press ENTER. If you are prompted for an administrator password or a confirmation, type the password, or click allow

  • In the navigation pane, find and then click the following registry subkey:

Tags: Acer

Similar Questions

  • Lenovo Y430 - drive Optiarc DVD RW AD - 7640 S ATA Device dvd does not

    Hi guys,.

    My Lenovo Y430 - drive Optiarc DVD RW AD - 7640 S ATA Device dvd does not

    Its not reading any cds/DVDs.

    Please could you help me how to fix it

    Once am put any DVD that the DVD is flashing and after a few seconds, his flashing no more.

    Mine is under WIndows Vista SP2

    I checked the CD-ROM/dvd-rom drivers in its 'active' display ' device working properly "Device Manager and registry also to 'upperclass' or 'lowerclass' settings entry just good.

    Please someone help me how to solve this problem.

    Thanks in advance.

    Kind regards

    Rambeau

    ++

    @bjawasa is 90% out of material. Lenovo ask to change your dvd - rom with a new free of charge if you have the warranty.

    You can call the help line: hindi or English speaking - 1800-3070-0010 (Toll-free) or 1800-113-324 (Toll-free)

  • Optiarc DVD +-RW AD - 7585H kann nicht gestartet werden, da Konfigurationsinformationen (in der registration) beschadigt sind oder unvollstandig its. (Code 19)

    Treiber können werden, aber nicht drive Assembly started loading. Therefore werden und weder noch wieder enchanted read CD DVD.

    Hello

    Please select your language from the drop-down menu above to post your question in the language of your choice. The forum in which you've posted is for English only. If you can't find your language above, support for additional international sites options are by following the link below:

    http://support.Microsoft.com/common/international.aspx

    Thank you

  • My player will not recognize a drive Optiarc DVD RW AD - 7203 A ATA Device

    I insert a disc and the drive does not recognize the disc whether it's a program, CD, DVD, etc.  I uninstalled the drive and then restarted is drivers re-installed but it still does not work.  What is the next step short of getting a new drive?

    On Thu, 20 Sep 2012 14:25:35 + 0000, Cameron O wrote:

    Considering that it has moving parts, they can break or wear out. Something to try, would be to get your hands on a cleaning disc and run a few times. You can get them cheap from most department stores, but I've also seen convenience stores as well.

    It does not hurt to try one, of course, but my experience with these
    cleaning discs, it's that they are unnecessary and do not help. It is likely
    that the drive must be replaced.
    Ken Blake, Microsoft MVP

  • Need driver for Optiarc DVD RW AD 7580 s drive for Windows Vista 64-bit

    I just bought a new Lenovo Ideapad Y550's.

    Everything works well except the drive Optiarc DVD RW AD 7580 s. I checked the configuration of the pilot and found that a file system 32 called cdrom.sys driver has been installed.

    What is the correct driver for a 64-bit Vista system? In a few weeks, I'll move from Vista to Windows 7. Will it then a new driver?

    Where will I get the right driver for my 64 bit Vista system?

    Help, please.

    Well, I took it to the center of service, and in about five minutes, they put it right.

    Asked about this, they said that it was a problem with the 'settings '. They did not specify.

    Now, everything's fine.

  • my computer laptop acer aspire 4736 doesn't detect DVD but the CD is very well undetected by Optiarc DVD RW AD-7580 s

    MY LAPTOP ACER ASPIRE 4736 BOUGHT A YEAR AGO. NOW MY LAPTOP DOES NOT DETECT ANY TYPE OF DVD BUT IT DETECT CD FINE. DVD ROM DRIVER IS OPTIARC DVD RW +-AD-7580 S

    I DID THE FOLLOWING: -.

    (A) TO UNINSTALL AND REINSTALL THE DRIVER FROM THE DEVICE MANAGER

    (B) CLEANING LENS

    (C) NO. UPPERCASE / LOWERCASE KEY FOUND IN H_KEY

    PLESE HELP

    Most optical drives have separate lasers for CD and DVD.  It seems that if the laser for the DVD part is defective.

  • Software peripheral drive not properly installed - Code 39 - Optiarc DVD +-RW AD 7580 A ATA Device

    Need help!
    Recently bought a laptop Dell Inspiron 1525 using the Vista operating system.
    The DVD + RW device worked but recently failed.
    Device Manager found the driver who is Optiarc DVD +-RW AD 7580 A ATA Device
    Device Manager is a (-) marker that tells me that the driver does not work.
    I tried to update the driver but the message received is "already installed the latest driver.
    I wanted to uninstall driver and rebooted the system.
    On reboot, the system attempted to reinstall the driver for my CD ROM
    I then received message 'disk device software was not successfully installed ".
    Also received message "Windows cannot load the device of this material. Code 39 "
    At the present time, my CD-ROM device does not work.
    I would appreciate anyone who has a solution to this problem.
    Thank you in advance.

    Have you recently installed a new burner software? Several of installs it burner can cause error 39. You can rightclick this link to another thread of responses on the deletion entries "Upper filters" and 'down '. You can remove those creating the CMD file I'll paste it in below, created by William Keener.

    1. Copy carefully and then paste the following three commands in Notepad:

    Reg export HKLM\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}-%userprofile%\desktop\CDFiltersBackup.reg
    reg delete HKLM\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}------UpperFilters f v
    reg delete HKLM\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}------LowerFilters f v

    1. Save the file to your desktop as DeleteCDFilters.cmd.
    2. Right click on the DeleteCDFilters.cmd file to your desktop, and then click run as administrator.

    Note After running this script, all custom CD/DVD filter drivers installed programs maybe isn't able to use your CD/DVD until your reinstall these programs. If the script command solves the problem, you can restore your custom filter of CD/DVD drivers by double-clicking on the CDFiltersBackup.reg that the command script exports to your desktop.


    (Soon we will see a button "FixIt4Me" of his team to do this automatically.)

    Mark L. Ferguson MS - MVP

  • device driver was not installed optiarc DVD RW AD 7581 ATA device

    Graduated fron windows vista home premiun, Ultimate and optiarc dvd rw ad-7581 ata device will not work. How can I fix it?

    Hello

    Check with the Maker system and/or the manufacturer support and Forums real player
    (if any). There is no reason for the reader who has worked on Vista HP does not play
    on Vista Ultimate.

    Step 1: Please do all the same underneath if you did some before as is often total
    a process that solves the problem.

    Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
    Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
    RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
    below.

    Then, work your way through these - don't forget the drive might be bad, could be a coward
    cable or slight corrosion on the contacts (usually for a laptop) and other issues.

    Your CD or DVD drive is missing or is not recognized by Windows or other programs
    http://support.microsoft.com/kb/314060 - a Mr Fixit

    Try this fix manually if the Fixit 314060 does not work
    http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

    Your CD or DVD drive is missing or is not recognized by Windows or other programs-
    a Mr Fixit
    http://support.Microsoft.com/kb/982116

    The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
    for Windows Vista
    http://support.Microsoft.com/kb/929461

    When you insert a CD or a DVD, Windows Vista may not recognize the disc
    http://support.Microsoft.com/kb/939052

    Your CD or DVD drive cannot read or write media - A Mr Fixit
    http://support.Microsoft.com/GP/cd_dvd_drive_problems

    CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
    Vista installation after booting from the DVD (AHCI)
    http://support.Microsoft.com/kb/952951
    Drive CD - R or CD - RW Drive is not recognized as a recordable device
    http://support.Microsoft.com/kb/316529/

    Hardware devices not detected or not working - A Mr Fixit
    http://support.Microsoft.com/GP/hardware_device_problems

    Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
    ends. Remove and replace, do not just tight. For laptops, you can often clean power and
    contacts data with a pencil eraser.

    Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
    manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

    ===============================

    Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
    Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
    do it right.

    Did you follow the Troubleshooting Guide for the reader who still does not work? There are
    the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

    Check with your Maker system and a device for the two possible firmware updates and
    the correct registry entries for your car.

    Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
    as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
    the parameters.

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

    -----------------------------------------------------------------------

    You can probably find more info here and maybe even the exact registry for your CD/DVD settings
    drive from someone with the same model.

    Forums - a lot of expert real help
    http://Club.myce.com/

    CD/DVD units
    http://www.myce.com/storage/

    Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
    nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

    DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
    devices and their properties in flat table, instead of the tree viewer
    http://www.NirSoft.NET/utils/device_manager_view.html

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

  • Why my dvd drive optiarc does not read DVDs but reads cds

    one day my optiarc dvd drive just stopped reading DVDs. It will read DVD if I install linux but I do not like linux, so how can I get running again? It seemed to stop working after an update. I have the device sony optiarc dvd rw ad - 7203a ata

    Hello

    I suggest to follow the steps from the article below and check if this can help,

    When you insert a CD or a DVD, Windows Vista may not recognize the disc

    http://support.Microsoft.com/kb/939052

    Hope this helps,

  • Problem with Optiarc DVD Drive

    My DVD drive is an Optiarc DVD RW AD - 7203A ATA Device.  I have this message "Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19) ».  How can I solve using the Windows registry?

    Hello

    Try the microsoft 'fix - it' for your problem below

    http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

    and read this information too

    http://support.Microsoft.com/kb/982116/en-us

  • driver problem Optiarc dvd rw ad - 7561 s ata device

    Dear Sir.
    Recently, I buy a compaq presario CQ61-115EE before Laptop.Twodays I was watching the movie by the player. After that, I loaded panasonoic camera digital cd software tried to install in my laptop, because installed everything except fast player and at that moment, I uninstalled all programs related to the software of panasonic. On this day evenining I'm watching the movie again via a system drive, but is not running. So I went to the cotrolpanel Device Manager. In that I crossed optiac dvd rw file and observed in driver Panel. In this appearance, Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) Click on 'Search for solutions' to send data about this device to Microsoft and to see if there is a solution available. And I tried to update via internet but showing only already updated file is in the laptop.

    My LAPTOP is compaq presario CQ61-115EE with windows vista Home premium service Pack 2.
    Optiarc DVD RW AD-7561 ATA Device

    Please help me solve this problem.
    Thank you

    vsrao
    Engineer (execution of piping)
    Muscat

    Muscat vsrao

    Hello Valerio srinivasa rao,

    Have you tried to uninstall your optical drive through the Device Manager and restart your computer? If this isn't the case, you should do it.  Otherwise, have you tried this miracle solution?

    Link: http://support.microsoft.com/kb/314060. You need to uninstall all third-party software (example: Roxio, Nero, or iTunes) from your computer

    prior to this fix. After you restart, you can reinstall your software and try again to see if that solves your problem. Otherwise, it could be that the drive is dusty

    (goal) or bad. Hope this helps you. Let us know anyway. Make it a great day!

    "In the end the love you take is equal to The Love You Make" (The Beatles last song from their latest album, Abbey Road.)

  • Optiarc DVD RW AD7710H driver does not install

    Separated from this thread.

    I have exactly the same problem with my Optiarc DVD AD-7710 on Sony laptop and I also uninstall and sought changes to the equipment and the updated driver to update, but unfortunately the problem was not solved at all. The problem started recently without doing anything. Seems that some update in the operating system or the driver caused this problem to be happen. Material to DVD does not have no problem because I can boot my laptop with kaspersky rescue CD and then I see the content of the CD but when windows 7 is driver problem happen.

    Please help me if any body has resolved the problem.

    I did what you said above (all points) but the problem was not solved, fortunately the problem was solved by downloading Microsoft DVD fix tool "MicrosoftFixit.dvd.MATSKB.Run.exe" and run it.

    Please say the same for others who has the same problem.

  • Optiarc dvd rw ad 7280 s ata device has a driver problem

    "" How can I solve this problem of pilot-"optiarc dvd rw ad 7280 s ata device has a driver problem" and error 19

    I am using windows 7 Home Edition

    The does'nt of the computer recognizes the optical device

    How can I SOLVE this

    E-mail address is removed from the privacy *.

    Thank you

    Hello.

    -Run these attach the.

    http://support.Microsoft.com/kb/316529/

    http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

    http://support.Microsoft.com/kb/982116

  • Optiarc DVD +-RW ND - 3570 has DVD + R not recognize drive

    When I put a DVD + R in the drive it auto runs and recognizes it as a CD, and I can't write to it. I went into the properties of my computer and Device Manager, and the player is visible as an Optiarc DVD +-RW ND - 3570. I'm confused by this one.


  • CD of Optiarc dvd rw 7560 s works is not on the HCL laptop

    I m using HCL with Windows XP installed on laptop

    I have the optical drive Optiarc CD/DVD RW 7560 s, which does not display any CD/DVD in the drive and not do not read any disk not same disc iso image when I try to boot from the CD.
    I checked the drivers through the Device Manager it says drivers installed and no new update available
    pls help me my cell phone begins to read CD/DVD

    thanx

    Hello, anuj_lima

    Please see the following page: http://support.microsoft.com/mats/cd_dvd_drive_problems/en-us

    It contains a Fixit provided by Microsoft that will detect problems with reading and writing CDs.

    Thank you.

    Smithy.93

Maybe you are looking for

  • How can I create folders in bookmarks?

    I tried to choose bookmark as a topic for my question, but got a blank page. I walk, how I can organize bookmarks in the folders.

  • I miss the favorite column of IE, having a single click by selection

    A column of visible Favorites permanently on the left actually IE faster for me than Firefox.Any way to create a similar display of quick click in Firefox?

  • What does the Crescent Moon in my messages?

    Theres a little 'do not disturb' Crescent Moon next to one of my friends text messages. The most funny thing is she didn't she do not disturb mode on. I don't know what it is. When the texts she has me, he didn't warn me. Itll come in silent mode. St

  • Essential security error

    HelloUsing Windows XP. Tried to install Microsoft Security Essentials. I get an error code 0 x 80070643. What should I do? You want to unintall Norton. Norton must be uninstalled before installing your program. I don't want to be left unprotected if

  • How do I scan?

    Hi all I'm working on an application where I get data to 5 ms/Division and I am the trace on the graph of a waveform with X-Scale 0-100. Now, I want to show tha same given to 10 ms/D. that is, all data will be displayed now on 50 points. PS: I don't