Aspire 5742 Bluetooth Stacker stopped working.

Immediately after, boots mobile message "Bluetooth stack has stopped working". There are two options 1) search on the web for the solution and close the program 2) close the program. There is no need to select option 1. It provides no solution or information about the problem. I tried all of the solutions provided by Windows Help. I also deleted the "Suite Bluetooth Win 7 (64) and pilots." the same error occurs after relaoding after the software and drivers. I can't connect to any Bluetooth device without encountering the error. Is there a solution? If not, are there other available software that are compatible with the Atheros Wireless adapter included with the Aspire 5742?

Thank you for your response.

Since the last version of the driver has not fixed my problem, I reloaded the operating system, programs, and drivers. Now the bluetooth works properly.

Tags: Acer

Similar Questions

  • The keyboard and mouse bluetooth suddenly stops working

    I asked this question before using Dell, but none of the answers provided.
    The keyboard and mouse bluetooth suddenly stops working.

    Given that this only happens when I'm online I make this question to the FireFox support.
    I have the latest version of FF:

    I installed the new BIOS and Shipset, but that does not change.

    Suddenly, the keyboard and the mouse do not respond and I have to restart manually.

    R

    FredMcD said

    Keep a log of when this happens. What did you do when...

    Check the batteries.

    Hello

    Thanks for the help

    Just for information:

    I downloaded a free software called "StartupBooster" and using this to disable or remove some programs, problems with the gel (Take on wood), is gone. In addition it also speeds up boot time.

    Concerning

    R

  • Bluetooth has stopped working on my Satellite P105-S9722

    I have a Satellite P105-S9722 and everything seems fine except the occasional extreme overheating it stops. In any case, my blutooth has stopped working.

    Here's what I've done so far:

    1 formatted, reinstalled clean (running the toshiba Vista business upgrade)
    2 tried to use the most recent bluetooth Vista drivers fron this site & Blutooth monitor 3 w / stack windows

    I tried several times without success. Here's what's happening.

    When I install toshiba stack, it is all the way to the grip and "install bluetooth driver". I get an error message on a USB device unknown who breaks down and will not be installed. It is under the TouchChip Fingerprint coprocessor. In addition, with the Bluetooth Monitor 3 installed, has no "BLUETOOTH" category in ther CP to set properties

    That's all. It hags just here and bogs of the bridge I have to restart the system.

    Any suggestions?

    Thanks in advance!

    If the laptop is overheated, you must remove the dust from the radiator. You can use a can of compressed air to blow off the dust.

    Have you tried to use the battery Microsoft Bluetooth standard instead? To use it, you must uninstall the Toshiba Bluetooth stack, then just install the Bluetooth screen

  • Bluetooth Stack STOP system

    Hi, new poster (so play nice, please).

    I'm developing an application using the Toshiba Bluetooth stack (Verson 5.10.14) and I get a few other quirks and STOP errors. (The test machine is a new Panasonic Toughbook own under WinXP Pro SP2, but I can get this on my PC also developing.)

    I think it's the battery from Toshiba as a WinDbg the points of discharge to be tosrfcom.sys (0x44_tosrfcom BUCKET_ID + a474). It's like the Toshiba stack is not completely thread-safe.

    I can get it, use a simple serial port and conecting/logout code using the window "Bluetooth settings".

    The STOP is MULTIPLE_IRP_COMPLETE_REQUESTS but I never more than one (from my code at least, the battery...?) connection of the battery.

    I also have a little easier problems while driving the RFCOMM using C++ code. He tries several times [re] connect but he is STILL waiting until the message CONNECT_ERROR before trying again - maybe because it is happening faster?

    It can generate the foregoing or an IRQL_NOT_LESS_THAN_OR_EQUAL STOP, or even damage the battery of the program (zero stack pointer) or my 'this' pointer (zero once again). It is interesting (?), there normally has just finished a call in a thread and returns to the thread's message loop.

    Any Toshiba autour who has ideas? I watched this on the web and sent the details (via another subsidiary of Toshiba) but maybe, just maybe, someone might have an idea.

    Thanks for reading, sorry if I confused everyone and no way I'm whinging - as a developer, I KNOW how diffcult it is to write the code of the test of the bombs!

    Hello James

    At first, I have to say you are welcome on this forum, but at the same time, I must say that your problem is a little. different and I really don't think you are here on the right place. To be honest I really hope someone will be able to discuss with you, but reading similar questions in the past, I think that you will have bad luck in this respect.

    As you know, Toshiba offers this software to use and that's the end of the story. Your question will be perhaps interesting for Toshiba Department of software development where you can write or speak with professionals but here on this forum for users...

    Unfortunately, I can't help you but I just wanted to say that I'm pretty sure no one of Toshiba will post here on such things.

    In any case I wish you good luck and I hope I've been nice ;)

  • Lenovo S920 Wlan & bluetooth suddenly stop working

    I observe my lenovo s920 wlan & bluetooth stop working and operating system of buges, Lenovo must be corrected as soon as POSSIBLE.

    Do a factory restore. If the problem persists then go to service center.

  • Acer Aspire R7: Touchscreen suddenly stopped working

    Hey everybody,

    I have an Aspire R7 (running 64-bit Windows 8). Yesterday morning my touchscreen suddenly stopped working.

    After each start, I see an error in the event log stating something like "Driver\WUDFRd could not load the driver for the device HID\VID_0483 & PID_91D1 & Col01\7 & 1b0945e0 & 0 & 0000.

    In Device Manager there is no device showing an error or something. In the category "Monitor" it is only a PnP monitor listed - shouldn't the TouchInput unit shown here? Edit: I also looked through the HID devices: the appliance with the ID hardware event log message is not there, too.

    I tried reinstalling the drivers HID-monitor using Acer Recovery Manager, but nothing else happens after showing some information like 'installation'. Also, there is no change in Device Manager.

    I also removed the "PnP Monitor' of Device Manager and began a 'search for new hardware", but that doesn't lead to the "PnP Monitor' be reinstalled.

    I also perform a factory reset, but that did not help, as well.

    I would really appreciate help from anyone. I'm at work now, so I wouldn't be able to test stuff until about 17:00 (MEST).

    Kind regards

    Jan

    I found the reason of my touch screen doesn't respond do not: if I position the screen in a very precise angle - 'almost' tablet mode - the screen reacts to the keys and of the previously disabled HID devices becomes active. I had sent in my laptop for repair after a default display - apparently in some sort the touch sensor was not back in place correctly when the screen has been replaced

    Seems that now I have to send my laptop in another repair (making three repairs for this laptop - the default mentioned display occurred after the motherboard has been replaced by the same Acer repair center)

  • Bluetooth mouse stopped working & USB device not recognized error

    Laptop using Windows Vista

    I was using my bluetooth mouse when I plugged my mobile phone (via USB cable) in charge. I have done this before w/o a problem (perhaps in another USB Port, now that I think about it) but I did this time and I instantly lost the ability to use my bluetooth mouse and the "USB device not recognized" bubble popped up. Now, this window pops up almost every 10 seconds even with disconnected USB mobile phone.

    I went to bluetooth devices trying to pair my mouse w / new laptop and I can not. It's not show my mouse and when I go to Bluetooth settings and try checking the box (and pressing OK) under the discovery that reads "Allow Bluetooth devices to find this computer" it gives me an error saying that this is impossible.

    Help!

    The manufacturer of my hardware (bluetooth mouse) will not be able to explain why this struck dead window device unrecognized USB is coming non-stop. Above tutorials did not help at all.

    Hey wsdp

    "The manufacturer of my hardware (bluetooth mouse) will not be able to explain why this unrecognized USB device breath."

    ask them

    Walter, the time zone traveller

  • Mouse Bluetooth Wedge stops working after restart

    Corner of the pairs of mice and the work of the session, but after each reboot, Hibernate, or sleep I have to remove and rediscover the device even if the control panel says it works fine.

    Hello

    1. you receive messages or error codes?

    2. other Bluetooth devices work well?

    This can occur if the Bluetooth drivers are not installed properly.

    Method 1:

    You can visit the computer manufacturer and try to install the latest version of the Bluetooth drivers.

    Update drivers: recommended links

    We can also refer to article and check if it helps.

    A Bluetooth device no longer works, and you receive the error code 43 with the event 17 after you resume a computer that is running Windows 7 to sleep

    Hope the helps of information.

  • ThinkPad Bluetooth 6.5.1.2700 apparently causes mice to stop working

    Since the update for ThinkPad Bluetooth software 6.5.1.2700 on July 28, 2012, my ThinkPad Bluetooth mouse stops working after using it for several hours. Turn off the Bluetooth power management does not seem to solve the problem. Please provide a download link to the earlier version of the ThinkPad Bluetooth software until this issue is resolved. Thank you.


  • Acer Aspire V5-473PG: FN + F5 has stopped working.

    Hello!

    FN + F5 of my Acer Aspire V5-473PG has stopped working. The other functions work fine.

    Operating system is Windows 8.

    Help, please. I don't know what to do.

    Thank you

    E.

    Hello

    See this topic from Acer: keyboard shortcuts does not and my shortcut keys do not work, how can I fix?

  • Control on my Aspire V5 keys stopped working

    Control on my Aspire V5 keys have stopped working. All other keys are fine. I use Windows 10. I even re-installed the Launch Manager.

    Any ideas on how to solve this problem?

    Thank you!

    Hello

    You talk of the control (ctrl) key, why do you that Manager launch could help you? I don't think that's a software problem. Is probably a problem with keyboard and you need a replacement keyboard.

    In any case if you still think the problem is software related, you can always try to boot a live CD of ubuntu (or USB) and see if the ctrl key is working. But I highly doubt.

  • Headset Bluetooth connected to the PC, but has stopped working.

    I recently bought a Bluetooth hands-free headset, with the intention to use it for my PC and Playstation 3. It took me a while to find a way to connect it correctly, but I managed to put in place and both the speaker and the microphone worked perfectly. However, when I moved my Bluetooth adapter to another USB port and reconnected my headphones, the speaker has stopped working. It was not broken, because he was still working on my PS3, but it did not play all the sounds from my computer. I would go to control panel > sound and I would be with the right button of the headset and click 'test', it would have displayed on my screen as if he were playing, but no sound came through the speaker. The microphone was still working, and I don't really use the speaker, so I didn't really like. However, I recently connected an controller to my PC as a game controller, and I installed the wrong drivers while my card is always connected. I uninstalled the drivers and later installed good, Bluetooth had stopped working on my PC, so I rebooted, plugged the adapter in, active Bluetooth etc, and I was able to reconnect my helmet. However, now the microphone has stopped working as well. I tried to use "Microsoft Fix It", and when I would try to help out the speaker or microphone, he told me to turn on my camera, then it is already enabled, and I wouldn't be able to do anything.

    Hi sexualharrasmentpanda,

    Please see the post below with a similar problem and fix possible:

    http://social.answers.Microsoft.com/forums/en-us/w7hardware/thread/2fdc6964-78f6-468F-98c2-a1a9c7ffadce

    I hope this helps!

    Debra
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think

  • After you have installed the latest Windows updates, my Bluetooth stopped working

    I installed the last set of updates to the window and it caused my Bluetooth to stop working.  Reinstalled drivers from the dell website and it still does not work. Fact a restore point and devices have started working again. Updates were the only changes. No other programs or updates installed.
    What updates do interfere.

    Dell E6530, Windows 7 64-bit, Intel core i5, office 10

    Original title: bluetooth

    Are you set for Important updates only (which is recommended)?  If not, was an updated device driver?  It is best not to let Windows Update process device drivers.
    If you cannot reduce it any other way, you can try to install the updates again one at a time.  I have not heard about recent blue tooth switn of the problems Windows updates recently.

  • Where can I find a license / update for my Toshiba Bluetooth Stack in Vista

    Hi, I have a Toshiba Satellite P100-240, I think doesn't have built-in Bluetooth so recently used a USB Bluetooth Dongle.

    Everything has been fine for the past month, but now every time I have insert the dongle I get the following message is displayed:

    + * "Thank you for the evaluation of battery Bluetooth Toshiba Windowsby. The evaluation period has expired. You can purchase a license for this version of Bluetooth Stack for Windows by Toshiba "* +.

    I am running Windows Vista Home Premium.

    If anyone can point me in the right direction, sure I would be extremely grateful as hours of searching the net left scratching my head about what to do next.

    Thanks in advance.

    See this Toshiba document:

    * Bluetooth adapter stops working ("Please get a license for the Bluetooth Stack for Toshiba.*")
    http://support.Toshiba.com/support/viewContentDetail?CT=SB&soID=1846427&ref=EV

    You must help ;)

  • On Windows 8, some widgets, such as the menu near the upper right button, stop working after awhile, and restored by restarting the PC.

    I use the latest versions of Firefox as soon as they are available on a PC in Windows 8. Firefox works fine, usually a few hours before the annoying problems manifest. The problem, that I address here is some widgets, including some widgets Firefox and widgets (such as buttons and selectors menu drop down) isolated in some sites stop functioning. In Firefox, the Menu button (the icon of three dashes stacked) stops working. And the download arrow sometimes stops working too. Sometimes, sub-items as printed stop working. A pull-down, the high and arrow down keys could still work even if I might now be able to select with the mouse. Closing and re-opening Firefox usually restores some functionality. However, I usually have to restart the PC to restore all the functions that has stopped working. So I'm good for usually a few hours yet. Another inconvenience, which others have addressed, is the appearance of Chinese characters - to research on the tab toolbar labels at the top. Restart Firefox gets rid of these for the moment. Thanks for the study.

    Philipp,
    Thanks for the quick reply and for the advice that you have presented.
    I downloaded and installed the graphics driver that you recommended. The process went well. I have hardware acceleration disabled by an earlier recommendation to remove these Oriental characters.
    After two days of problem apparently having been fixed, I considered replying to report success. But before I could get around to doing so, abnormal behaviors reappeared. Thanks for confirming the source of these Oriental characters. Previous research indicates that the source was with McAfee or Firefox, a bit like a battle for "pointing the finger" in between.
    Best,
    JRSTOUDT

Maybe you are looking for

  • Satellite R630-14 t - battery charge time

    My point of view Satellite R630-14 t 5 hours to recharge the battery. It is a normal time or not?Normally how long does take to recharge the battery for the low level of the batteries at the point of full battery on Satellite R630-14 t?

  • Mobile intel 4 series express chipset family Driver update

    Hello. I struggled to update my graphics driver. I have a laptop HP Pavilion dv4t 1600 CTO. My operating system is Windows 7 Home Premium 64-bit. My device driver is a Mobile Intel 4 Series Express Chipset Family, and the driver version is 8.15.10.18

  • Incorrect network password

    After a system crash I wonder a network passwords access three Raid drives I have on the network. I don't have a password that allows access. Before you even enter a password in the popup says "the specified network password is not correct" help!

  • All-in-one HP Office Pro 8610: black vertical line on the scans

    I have a black vertical line down my scans and copies that are feeding by automatic feeding (8610 Office Pro HP all in one)

  • STOP 0 X 00000050 (0XBFE703C5, 0X00000002, 0X00000001, 0X8050D532)

    Hello I get the BSOD with the above code. Said the error is PAGE_FAULT_IN_NONPAGED_AREA The computer stops this same error screen when I restart in safe mode. How can I solve this problem when I can't get into Windows even in safe mode. See you soon