Aspire 7540 does not start

Similar Questions

• My acer aspire one does not start. the scrolling windows screen, then screen turns off. logon appears and resets, sys

  My acer aspire one does not start. the scrolling windows screen, then screen turns off. but after a long time (45mins) the login screen appears and d sysytem restarts. I have a multi boot with 2 installations of xp, and this happens with both bones. not able to access my sys to bak - up also. all f8 options were considered, but no use.

  I have some bad sectors on d: (have total 3 drive partitions c:, d:, e: with xp on c: and e :))
  the sys wud show a blue screen and reboot when certain file wud b accessible on d:... now the sys cannot start all... pls help...

  Hi Srimotu,

  ·         You get an error message or an error code?

  ·         Have you made changes on the computer before this problem?

  Follow these methods.

  Method 1: Try starting it in last known good configuration.

  http://support.Microsoft.com/kb/307852

  Method 2: Try to start in safe mode.

  http://support.Microsoft.com/kb/315222

  If you are able to boot into safe mode, try a clean boot.

  http://support.Microsoft.com/kb/310353

  Note: After the clean boot for troubleshooting, return the computer to a Normal startupmode.

  Method 3: Disconnect external devices such as printer, scanner, etc. and try to start.

  Also disable automatic restart in the event of system failure

  http://support.Microsoft.com/kb/307973

• Acer aspire 5742 does not start

  Hi all hope you can help - I have an acer aspire 5742 running windows 7. the problem is that it doesn't start not until after bios acer launched toward the top of page and just continuously loop around. F2 and F12 keys available no. function F8 or F10. tried to re-don't boot from the recovery disk no joy. Startup disk in the bios change still no joy. Cannot make a secure boot or system reset as unavailable F8 and F10 keys.

  fan does not (not over heating)

  HD is running

  can you please help

  Hi - I've worked with thanks to you all, I'll wish to explain how to fix at the base.

  1 - Download partition manager free 2014. http://www.Paragon-Software.com/home/pm-express/

  2. run the partition manager and select go delet.

  3 - Select the partition that has 100 MB space and delete

  4. then select the larger partition and delete.

  5 - turn off the power to the laptop

  6 - Turn on the laptop

  7. when the acer page appears, press ALT + F10 ONLY once.

  8. then I chose to install full. higher setting.

  Bingo it completed the complete installation without blocking upward on the desktop.

  This has been mentioned somewhere else where but should be simplified.

  hope that it all works for you.

• Aspire 5734Z does not start on DVD or USB

  I have an older 5734Z, I was dual-boot Windows 7 and Ubuntu Linux. Please don't ask why, but there are a few nights, I was extremely mad, and finally insert my live cd of Linux and the entire to FAT32 hard drive formatting, I mention this to show why I'm trying to reinstall.

  If the next day, I get my Windows 7 installation disc, insert it into the DVD drive, rebooted, finished computer POST and immediately went to a blank screen with a blinking cursor, the PC is completely insensitive, or locked, it does not meet anything other than the power button. This has happened about 5 times, so I got my Linux installation CD and got the same result, POST to flashing on a screen cursor blank and the pc is totally insensitive, only option is to press the power button until it stops. I try some other installation disc the same result.

  Can I get a DVD USB drive and try all different installation media, with the same result. So I get another pc and create an installation program for the flash drive USB, with the same blinking cursor and a white screen. I know that the formatting of the disk has no effect on whether it loads the install DVD/USB media, I know that the hard drive is formatted to have no effect on starting to install media, I know that I do not need to format before reinstalling, but resettlement of time was not exactly what was in my mind I just wanted to blank computer. It comes to all things, I heard on other forums instead of solve my problem, which is why didn't he start either from DVD/USB DVD/USB flash drives?

  Try typing several times the F2 key immediately after switching on to try to get into the bios menu. If you can, go to advanced settings and try to set the DVD first in the boot sequence to try reinstalling.

  Jack E/NJ

• My Acer Aspire R14 does not start with the cord of the charger plugged in with the battery connected to

  A few weeks ago, my laptop Acer Aspire R14 went totally blank. When I unplugged the power cord, it started right to the top, but at the moment where I plugged the power cord back inside would be closed. The battery dies quickly in this way, because it would not charge. I removed the battery then it started upward with the power cord. I thought it must be the battery, so I installed a new battery. which is not to change the problem.

  So, I ordered a new motherboard and after a few weeks, I received it today, installed, and I have always the same thing. It works well with the power cord plugged in until the battery is disconnected. But at the time wherever I connect the battery, everything stops, not to be revived unless I disconnect the battery.

  I need help! What could be the problem?

  Glad I could help.

• Acer Aspire 5515 does not start

  Well, I have a 5515 Acer Aspire running Windows Vista Home Basic Edition. It hasent been working lately (VISTA USUALLY START!). I have no idea what my BIOS password. In any case, I have a never used Windows Vista Ultimate not copy to level. Can I pop in my computer and without starting Vista, (re) install vista? PLEASE HELP ME! I'VE BEEN WITHOUT A COMPUTER FOR A MONTH! I HAD TO WRITE THIS ON MY IPHONE!

  http://support.Acer.com/

  If you have problems with BIOS password, you will need to contact Acer at the link above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  You can't get in your version of Vista has to do an upgrade, you need a license Ultimate FULL Vista to do a clean install, not an ultimate upgrade license.

  BUT you cannot change boot order if you have BIOS password problems.
  Contact Acer is the solution.

  See you soon.

  Mick Murphy - Microsoft partner

• Aspire One D257-13478 does not start after the system BIOS flash.

  I gave my child a D257 - 13478 new ASPIREONE.

  It came with Windows7 starter - was very slow, crippled and crashed a lot.

  After a while, I have re-formatted the HARD drive to remove Windows-resources-pork-7, and I installed Windows XP Professional (SP3).

  After which, the netbook has been much faster, and I could navigate with 5 windows open browser (FireFox) and NEVER receive (not RESPONDING), as I was always getting with Windoze 7. He's been good for 5 months.

  Anyway, it worked fine except that I could not find driver XP for [CODE 10] Broadcom wireless card,.

  so we were not using WiFi.

  Today I read the suggestion to update my BIOS to correct [CODE 10 number}. I went to acer link and downloaded the BIOS of the Organizer, RAN the EXE and the netbook went to restart.

  When the ACER logo appears, a blue screen flashed QUICK, and the netbook RESTARTS again.

  Asking me to start Windows normally just repeat what's happening above

  When I choose Safe Mode... drivers will charge up to Mup.sys and then the system just REBOOTS.

  When I try the last good Configuration known, same thing.

  Enter the system (F2) shows, Version of the system Bios configuration utility: v1.15

  It used to be all about v1.10.

  .................................................

  Then. What is my next step?

  Will be my HD reformatting and reinstall WIndowsXP DIFFICULTY this problem?

  or

  How can I RESET my Bios to v1.10 (when everything was fine).

  No software to use on a USB key to solve this problem? (because theres no CD don't drive of course)

  Thanks in advance.

  Hi MOne

  The flash will have changed the BIOS settings, so go in the BIOS settings and verify that the setting of the HARD drive is in AHCI mode. If it still does not start XP, then it is worth trying to format & reinstall Windows from scratch.

• just installed sp3, xp does not start, gores in safe mode.

  I installed Windows XP pro sp3 today.  When I try to restart or start my acer aspire laptop Windows XP does not start and the computer goes to the safe mode screen

  How to remove Windows XP Service Pack 3 from your computer
  http://support.Microsoft.com/kb/950249

  How to troubleshoot an installation fails on Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950718

  Release notes for Windows XP Service Pack 3
  http://support.Microsoft.com/kb/936929

  The space of hard disk required for Windows XP Service Pack 3
  http://support.Microsoft.com/kb/947311

  Steps to take before you install Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950717

  How to troubleshoot an installation fails on Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950718

  Some third-party programs can make a change in functionality after you install Windows XP Service Pack 3
  http://support.Microsoft.com/kb/947309

  How to obtain the latest Windows XP service pack
  http://support.Microsoft.com/kb/322389

  Windows XP Service Pack 3 - file to Image CD ISO-9660:
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=2FCDE6CE-B5FB-4488-8C50-FE22559D164E&displaylang=en

  Windows XP Service Pack 3 for developers network installation Package and the professionals (unique facilities for the PC can use the same file)
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5B33B5A8-5E76-401F-BE08-1E1555D4F3D4&displaylang=en

• Put 8g memory in es1-512 but does not start. Had to put 4g in. Does anyone else have this problem?

  Put 8g memory in ES1-512 but does not start. Card say that it will accept up to 8 GB. He went out, re he sat several times without success. Does anyone else have this problem? Thanks in advance.

  Hello

  Here's the original memory stick for Aspire ES1-512:

  KN.8GB07.013

  SODIMM.8GB.DDR3L - 1600.KINGSTON

  OR

  Compatible memory: Kingston

• How can I reinstall windows xp when the computer does not start and there is no cdrom/dvd drive?

  I have an Acer netbook aspire one.  It will not boot past the windows logo.  I have a windows xp disc to reinstall windows, but the computer has no CD or dvd rom.  Can I copy cd of windows xp on startup SD memory card and reinstall windows?  Or can I run connect the non working pc a working PC to access the cdrom on the work pc to reinstall windows?

  First of all, you are mistaken when you say that the PC does not start.

  This is clearly starting. The problem comes from Windows, not with the real PC. It's actually a very important distinction!

  There are methods to repair Windows, but they can be a bit tedious. By all means, follow the advice given here to do if you're so inclined.

  If you would not rather to repair Windows (and I think it's interesting a try) or your repair attempts are unsuccessful, apparently, you would need to use an external optical disc drive and follow the instructions here:

  http://Acer.custhelp.com/app/answers/detail/A_ID/2631

• Siri does not start under macOS Sierra

  I've recently updated to macOS Sierra (public version) and everything seems fine, except for allowing to Siri. I tried to enable the system preferences as well as execution of the Siri application in the application. I even tried to 'facilitation' by selecting in the menu bar.

  In any case it does not start. Upon activation in system preferences, I get "There was an error in the preferences of Siri." and it takes back me to the main view of system preferences.

  Y at - he of the log files that I should be reviewed to determine the cause of this problem?

  Thank you

  Steve

  Same thing here on a MacBook Pro (13 inch, late 2011)

• Black MacBook does not start

  I have a 10 year old black Macbook, which does not start when a battery is installed.  If it is connected without battery installed, it lights up, but if there is a battery in it, even if it is plugged in, it will get the startup sound and the screen of the Apple gray, then turn off.  I got a new battery and charge it where the charger turned green, but the results are the same.

  Any suggestions?

  It is difficult to say what is happening with this machine, since the time and wear are considerations. I don't know what version of the operating system that you use, but there is a sequence of things you should do - in order of severity.

  http://www.howtogeek.com/217158/what-to-do-when-your-Mac-won ' t-start-up.

• iPhone hot 5s fees and does not start

  phone is connected to the load.  After a while I checked it and it was very hot.  I unplugged it and now it does not start.

  Have you ever tried to force reboot the phone by holding down the button sleep and home for 10 seconds, until the Apple logo comes back again? You won't lose data.

  More troubleshooting can be found in this article:

  If your iPhone, iPad, doesn't respond or won't turn on - Apple Support

• iMac does not start after the last security update

  Hello

  After the last update my iMac (late 2009, El Capitan) does not start.

  The iMac starts he accepts my user and password entry, the loading bar stops at 80% and then nothing happens... after I turn off the iMac. Repeating this procedure change nothing.

  Does anyone have any advice for me?

  THX

  INTELLECTUAL PROPERTY

  a solution that helped me:

  Re: security update causes damaged Apps

• iMac does not start after 10.11.6

  Since the 10.11.6 patch my IMac does not start with my hub plugged.

  Everyone

  I assume you mean a USB hub? What does do when it's plugged in? It starts successfully when the hub is not plugged? If so, I would say that something is wrong with the hub or there is a problem with the port it is plugged or something plugged into the hub.

  Try to plug it into a different USB port on your Mac.