Aspire E1 - 572G - 10 Windows shutdown and restart problems

Similar Questions

• Upgrade of RAM and windows stops and restarts automatically when it tries to load.

  I recently updated my computer running:

  Motherborard: ASUS Crosshair V Formula

  Graphics card: MSI R6970 lightning (2 GB dedicated DDR5)

  RAM: 2 x 4 GB Corsair vengeance 1600 Mhz

  I have another 2 x 4 GB of ram and have tried loading windows vista ultimate 64-bit with installed, the configuration of the bios recognizes that the ram is present, however, windows crashes and restarts automatically when it tries to load.  Any suggestions on how to get this extra memory working out to change my Linux operating system?

  Thank you

  Chris

  Hi Chris,

  You can try to connect a single stick of RAM at a time and see what happens.

  If you are not facing problems, then try to swap the RAM sticks and check for the issue.

• Windows 10 and Lightroom problems solved.

  Windows 10 and Lightroom problems solved.  I want to update my PC system and install LR 6 (nonCC)

  Any advice before proceeding would be appreciated.

  Thank you.

  Len

  Atul, I thank you for your response. I had read a lot of comments referred to as before posting my query. Not too encouraging - used LR 2/3/4 with operating system previous Windows without problem. Will sit on the fence a little longer on this one.

• I have Photoshop CS5.1 Extended with free upgrade to CS6. How do I re acquire this upgrade?  I upgraded my laptop from Vista to Windows 7 and had problems with the way he ran I did a full clean install of Win 7 and am trying to re install all my

  I have Photoshop CS5.1 Extended with free upgrade to CS6. How do I re acquire this upgrade?  I upgraded my laptop from Vista to Windows 7 and had problems with the way he ran I did a full clean install of Win 7 and am trying to re install all my Applications

  Please refer to I have Photoshop CS5.1 Extended with free upgrade to CS6. How do I re acquire this upgrade?  I upgraded my laptop from Vista to Windows 7 and had problems with the way he ran I did a full clean install of Win 7 and am trying to re install all my

  (Double Post)

• Windows xp sp3 does not start after the failure of windows update and restart.

  Hello

  My ADVENT 3217 pc runs windows xp sp3 does not start once a windows recently failed update and restarted. He's just in a reboot loop. The first time it happened I got an error code of c000021a. I tried pressing F8 and try to start safe mode and other options... but still nothing. I also tried to use my restore disc supplied with my pc. So far, I've only tried the non-destructive recovery to restore windows and it did not work. I don't want to lose my files that I have not saved for quite awhile.

  Can anyone help?

  Thank you

  Hello

  · The updates you have installed prior to this problem?

  You can try the steps listed in the link below: how to solve an error "STOP 0xC000021A": http://support.microsoft.com/kb/156669

• Windows stops and restarts each time I login, the last thing I did was partition the hard drive

  I upgraded my hard drive because I needed more space.  At first, I put the same settings as the original drive.  C is the primary drive and D is the HP recovery disk.  There is apparently a small partition that windows uses, but does not have a drive letter.  I left all sizes even.  This has left me a large part of the unallocated disk.

  With the help of Partition Master, I created a major score that I use for music, photos, documents, etc.  At the time I did, I got an external hard drive connected.  He was assigned as drive F and I created the new partition as G:.

  Shortly after this, my computer crashed and restarted.  When I log in, it says that windows has recovered from a serious error.  It plugs along for a little while and then did the same thing again and again and again.

  It doesn't gives me a lot of other information that means something to me.  If I click on the Details button for the information it sends to Microsoft if I want to report that it has a bunch of gibberish, but I'm sure that it wants to say something to someone.  I'll try to copy the next time it hangs after as I write this.

  I ejected the disk external and changed the drive letter on my new partition to F.  I can't believe that's going to do something, but I thought that maybe the partitions on the drive must be in order (of course, I'll try anything).

  Any help would be appreciated.  Thank you.

  Hello

  You can follow this link & check if the problem persists.

  A "System has recovered from a serious error" message after every restart.

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• constantly, Windows starts and restarts

  Recently, I replaced the hard drive of my HP dv9000 Laptop. I reinstalled the OS vista with a DVD provided by HP Vista Home Premium OS-specific. Installation of Windows, but my computer continues to close and restart. In addition, my wireless modem is not recognized and the resolution of the screen is distorted. I had to unplug the power cord and remove the battery so that the computer would not restart. Any suggestions?

  Hello

  Given that you have reinstalled Windows the problem is material (almost 100%) or BIOS,
  of low level, or other great drivers chipset drivers.

  Check with a real computer store (one that makes its own service internal and not of leeks)
  and displays a Best Buy or other stores) or system manufacturer support. Also
  Ask known problems in their forums.

  Support HP & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• unexpected shutdown and restart with electric conducting State error message

  My Toshiba 305j goes through a stop because of the error driver power state failure and then restarts. This happens about every 20-30 minutes. Sometimes it will work for hours before she started it. Happens if I am on the internet or not. It is a PC at home. I've seen this problem on other forums but don't see that speculation as to the cause or the cure.

  Hello Pepperl,

  Welcome to the Microsoft Answers site!

  How long have you had this problem?

  Here here that you can try:

  Step 1:

  I recommend you update all the drivers of material first. Follow the link below to help this.

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  You can even visit the manufacturer's website to download and install the latest drivers.

  Step 2:

  To avoid the error message, update or remove the driver at fault. This behavior is not limited to device drivers; It can also occur with file system filter drivers (for example, drivers installed by an anti-virus, remote control or a backup program). To isolate the driver that is causing the problem, follow these steps:

  1. make sure your computer and all devices are on the hardware compatibility list (HCL) and have WHQL signed and certified drivers. You can use Sigverif.exe to check for unsigned drivers.

  2. check for driver updates that may be available for your hardware.

  3. update the software that use filter drivers (for example, anti-virus, remote control, and backup software).

  4 uninstall all devices that are not critical and software to help isolate the device/software that can cause the problem.

  5. install Windows in a new folder. Add drivers and restart as you proceed to isolate the driver that is causing the problem.

  Hope this information is useful.

  Kind regards

  Savan Microsoft technical support.

• Unexpected shutdown and restart automatically

  Hello

  Is the issue that I'm face using windows vista business.when I use it stop and restart unexpectedly.it will ask me to reboot into different options, I chose normally identify in blue system.i get on-screen and there will be some memory test and suddenly it restarts.

  original title: about the United Nations expect stop and restarting my computer

  I seem to have soe kind of hardware problem.  Look on the computer to see if it's so hot anywhere you can't hold your hand on it without removing it from the heat.  If so, the problem is most likely overheating.  Check that the fan is running and clean the admission and eshaust winds as the best you can (if it of a PC and not a laptop, remove the clover and give it a good glean all the dust, lint, paper or another anthing like this that may block the ventilation openings or interfere with the movement of fan).  Furthermore, it provides the different options when it restarts because that it is not stopped correctly - that's normal when this happens.

  Go to the Device Manager by going to start / find and type Device Manager and enter and then double-click on the program icon that appears.  Check each device to a red x, yellow! or white?  These identify devices with problems probably (drivers, but also of conflict or something else).  Click on each for more details and troubleshooting tips.  If you need to get drivers (do this for as many devices as you have time for - this can help way beyond simply solve this problem), let the computer dealer or the manufacturer of the device (NOT of Microsoft Updates).  In fact, you must disable automatic updates in Windows Update driver as follows: http://www.addictivetips.com/windows-tips/how-to-disable-automatic-driver-installation-in-windows-vista/. Follow these steps to get the drivers: http://pcsupport.about.com/od/driverssupport/ht/driverdlmfgr.htm.  Once you have the drivers, you can install them via the Manager device as follows: http://www.vistax64.com/tutorials/193584-device-manager-install-driver.html.

  To test your hard drive, check the manufacturer and then get the diagnostic utility of: http://www.techsupportforum.com/hardware-support/hard-drive-support/302602-hard-drive-diagnostic-utilities.html (and/or the manufacturer, if they have one available for download on their website).  If she failed the test, replace it.  If she passes the test, then it's probably nothing wrong with it.

  You can also test your RAM to http://www.memtest.org/.  If it fails, test each piece individually to find those who are bad and replace.  If it passes, the RAM is probably OK.

  -----------------------------------------------------------------------------------------------------------------------------------------------------------------------

  Read the messages and follow the procedures established by the MVP of the spirit in the following thread on the Blue Screen of Death.  They should help you solve your problem. http://social.answers.microsoft.com/Forums/en-US/vistahardware/thread/8cd8362e-7d06-46fb-afd7-84d54b6a8ea7.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• HP/Compaq nc6400 laptop: HP/compaq nc6400 Windows 10 and graphic problem, erasing text in areas of immersive shell.

  I have a laptop nc 6400 product number: RB518UT #ABA uses an ATI mobility Radeon x 1300 graphics card, as well as Intel (r) mobile express chipset available 965 G. I chose to use Classic desktop windows at the moment and no problem at all now. I don't know about Vsync or 2D with any partbut I disabled it Aero, windows 'themes' clear the text, mosaic with not a spec left shaows WHEREAS I could think of and still the text clears using my own slider like gum or disappears and leavesablank. Alsooccasionaly gibberish are more black lines not only any official language, but today I thought that almost a nonsense post script type to some... in some mobile tiles that can refresh, but even that does not work as it always has... I am at a loss I need a decent graphics that I use photoshop and dreamweaver allt/times a day and at least they need to exploit as much as possible. I had no problem with their execution on this computer for the past 4 years or more. It has been now 4 OS on this big machine that has not had any problems over the past 7 years. He 4gig memory and 750 GB hard drive and lack of wellis touchscreen but... not worry Windows when they checked all this to check.  I am beyond my capabilities and need help. Even if I need to build my own divers I Although it will not be the fastest answer, but I can see the need to know how the alter pilots an asset right about now.  Please you all the

  suggestions will be an asset, as I am a "what to do now the level of frustration"and would like that much more about the reason for it. " I was just as lucky as my machine has never had issues that were close to that sort of thing.

  TY for any help, answers, all possible assistance, you may think.  I hope that I have provided a clear problem, and most of the information you need. I never used a service like other instances, that raising any issues that others have as well.  Always helping if I wasn't sure but never as difficult a question as is happening now.

  Ty for any possible assistance or suggestions that can point me in the right direction.

  egcorrell

  Hello:

  The only suggestion I can offer would be manually install the graphics driver Vista support for your laptop and driver, page and see if it works...

  BTW, the nc6400 has the mobile Intel 945 chipset, not the 965.  The 6910p has the 965 chipset.

  Download and run this driver... You will probably get an error of unsupported operating system.

  http://h20565.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=1847705&swItemId=ob_59975_1&swEnvOid=2103#tab1

  Conclusion of any windows error.

  Go to Device Manager and click on the video controller (or Microsoft based Display Adapter) who need drivers.

  Click the driver tab.

  Click on set to update driver.

  Select her browse my computer for driver software option and navigate to the folder of the driver that was created when you ran the file.

  This file will be located in C:\SWSetup\sp38833.

  Make sure that the include subfolders is selected and see if the pilot goes like this.

  Then restart.

  If your nc6400 has this problem with the SMSC Infrared driver with the! Marc, I went into the BIOS, found the menu of Ports and disabled the infrared port, saved and restarted.

  That got rid of the problem of device.

  I don't know of anyone who uses the infrared port anyway.

• My compaq presario r3000 is beginning not after a windows update and restart

  I did a software update to microsoft windows, and when it's over, I was directed to reboot my laptop. After the reboot, I have my laptop wouldn't restart.  The windows xp screen would come and after a while the screen asking if I want to start in safe mode, safe mode with command prompt or of the last good connection. I selected all three at different times; However, it never restarts. In the selection of safe mode, I get a bunch of commands that scroll on the screen, but after a while, the windows xp screen comes back. I can perform a f10, but I am unable to find something that will help me to restart. can anyone help?

  Hi hretorico,

  1. what windows update has recently been installed on the computer?

  2. you receive an error message when you restart the computer?

  I would say that you shut down the computer for some time and later try to start the computer and trying to boot using the last good known Configuration, check to see if it helps.

  How to start your computer by using last good known Windows XP Configuration

  http://support.Microsoft.com/kb/307852

  If the previous step fails, you must perform the installation of repair of Windows XP.

  Perform a repair Installation

  http://www.Microsoft.com/windowsxp/using/helpandsupport/learnmore/tips/doug92.mspx

• My hard drive begins to randomly run very fast, then everything is locked, and I have to push the power button to shutdown and restart the CPU

  I use a desk top of HP 5 year, running Windows 7 Home Premium Upgrade from Vista.

  Im not 100% sure what you mean but I think you mean the fans come on fast?

  If it is then you probably have a dust build up inside your PC or something that hampers the movement of air.
  HP desktop computers are usually fairly easy to check inside, usually a handful or a pliers to remove the top cover or side (there may be one or two screws on the back), once you have it you can see the fans and just check if there is dust covering the front Grill , rear grille and the heatsink. You can use a small accessory vacuum cleaner to do this, just be careful not no knock all components.
  If you don't want you may damage whatever it is then if you have a friend or relative who knows a little bit of PC you could ask them to check it out.
  Usually, dust accumulates in areas where are fans which reduces the airflow in your PC and can make the fans rotation and your pc run slow / lock up.

• Update Windows errors and other problems.

  I just installed windows 7 on my computer. The problem is I can't seem to get the updates, I tried all sources (some worked, but did not resolve the full question). Patches some of the sources I'm like, Diagnostics Windows, Microsoft fixit and other software troubleshooting. Here are the two questions I have; 1. I try to check the windows update runs for several hours and then returns to "check updates for your computer. 2 updates show is ready to install on the stop button on the start menu, but not shown in WU. If someone can solve this problem, and I know that research on a certain need of people of this response, thank you.

  Your best solution is going to be a huge part of patience.  WU was extremely slow during the last 6 months.  I got a new facility just a day that lasted 7 hours ago to run.

  If your closing button indicates the exclamation point.  Do a restart and let him finish settle.  Return to Windows Update, then start it.  If you use a laptop, turn off the sleep function.  Go to bed and check in the morning.

• Windows app and phone problems

  Hi, I'm trying to transfer music from itunes to my nokia lumia 920. I do that all the time with the application of windows for desktop phone but tonight, it has stopped working, it says something about an ATL100. DLL is missing? I don't know what it is. PLEASE HELP ME

  Hi Jordan,.

  Please answer these questions:

  1. You have McAfee installed on your computer?
  2. Were there any windows updates installed prior to this problem?

  Looks like the Windows Phone app installation is corrupted, I suggest that you completely uninstall the application from your desktop. Restart your computer, and then reinstall the Windows Phone application. Please do not forget to download a new installation file.

  We look forward to your response. An update with the status of the issue.

• iPhone iOS 10 5 and restart problem

  Context: a year and a half months ago my left side of the screen (iPhone 5) began to burst, an indication of battery failure. I ran to an apple certified service in the country, I've been during the holidays. They asked 100 euros and five working days, so obviously, I changed the battery in a store not certified in 1 hour (unware of the battery, they put in). With iOS 9.3.5 all was well for the whole of this period later. No problem at all.

  Problem: last Tuesday (so after one year and), I have updated to iOS 10. Once again everything was working fine, until this weekend (3 days later), where my iPhone 5 has started to reboot frequently, i.e. Saturday and Sunday should have restarted more than 20 - 30 times without reason.

  What I tried: I reset all the settings in the settings menu, I did reset function sleep and home button, I restored my iPhone IOS 10 5. Nothing. The reboot occurs again. Last thing I noticed is that the reboot occurs less frequently (100% sure) while the iPhone is in charge.

  Question: is this a software problem on iOS 10 (do not believe now to be honest), or just the coincidence of a pile of problems that have occurred with the iOS 10 update, or something else? Here, I changed the battery (76 kilos), or give the iPhone engineering to get a new one for 198 pounds?

  Any help is welcome. Thank you very much.

  I solved it. I just changed my battery. No problem since then.