Aspire E1-731 Atheros ar956x driver display Code 52, no. WiFi after Windows 10 Upgrade

Similar Questions

• Satellite C50 - Qualcomm Atheros AR956x driver /wifi fall

  My Tosh c50 with Qualcomm Atheros AR956x adapter keeps dropping its connection with the blank superhub.

  The most recent drivers have been installed through Microsoft update, after the win8.1 upgrade.
  Queries of blank media if the pilots were from Atheros.

  Where on qualcom or Atheros can I have the latest OFFICIAL drivers?
  The laptop is fine with the Ethernet cable.
  In SIDDer allows to check the channels and power.

  It's very frustrating as just cannot be used for banking, shopping, the connection is lost.

  See you soon

  The Atheros WLan driver for your laptop model can be downloaded from the Toshiba driver page.

  But the fall of connection Wlan has not must be linked to the WLan driver.
  The question appears using the power of battery or as then as the connection?

  Have you tested different WLan (802.11 A B G N) standards?
  What about WiFi encryption?
  He doesn't interrupt the connection using a combination of different (WPA/WPA2 AES, TKIP) or connect to open WiFi?

• Print spooler problems and cannot install printer driver after Windows 7 upgrade (80070706)

  I just upgraded from Vista to Win 7 Ultimate.  Once installation is complete, I tried to update the drivers and install the latest updates.  Everything worked except for HP LaserJet 4 L driver.  As a first step, whenever the driver tried to install it, the print spooler service may stop working, and the driver installation failed with error code 800F0246.  I then removed everything from the spool directory, rebooted and tried again.  This time, the print spooler service has not prevented from working, but the driver still does not work with error code 80070706.

  I can't find the information for this error (80070706) anywhere on the web.  Any help would be appreciated.

  More information: the HP LaserJet 4 L printer is connected via a parallel to a prolific USB docking cable.  Windows recognizes the printer as the IEEE-1284 device, but says it needs driver to work.

  Update: I was able to manually add the 4L driver using the print server properties dialog box, BUT if I try to add a printer after that, I get "the print processor does not exist.  If I try to add a printer without installing the driver, I get ERROR 0 x 00000002.

  Everything is running as an administrator.  It worked perfectly under Vista.

  Thanks for these links, but these proposals did not help nor solve the problems.

  After a long and painful journey through the registry, I determined that this workstation was already installed 3rd party software, called "Pharos".  Apparently, this software was redirecting the default print processors and was clearly not compatible with Windows 7, although the installation of Win 7 never mentioned a problem of compatibility.  Once this software has been removed, and all the remains erased from the registry, there is now no problems with printers or print spooler.

  In the future, it would be useful that Microsoft has actually provided certain types of useful information when these accidents occur.  Cryptic error numbers and unnecessary event log entries did not provide useful clues.

• 450 HP: HP 450 Gen 2 Ethernet Driver missing / replaced by ISATAP Adapter After Windows Update

  Good afternoon

  I'm a network administrator at a small not-for-profit organization and aired on a particular issue with our 450 HP Gen 2.  Using Windows Deployment Toolkit, I have an image clean Windows 7 with the applications we want to push on these machines and then followed with update driver using the HP software Assistant.  In general, everything works.  But every so often, a 450 HP decides to 'lose' it's network, which is replaced by up to three non-working ISATAP adapt - hidden driver.  With hidden devices turned off, the Device Manager shows three network wireless, but not ethernet connections.  In addition, the NIC itself is completely dark; no nice little green/yellow lights sparkle.

  This was happening before with an image earlier established by my predecessor, and I discovered that this image was intended to HP 450 Gen1 and Gen2 not - even if the image has been labeled Gen2. Thought it was just a simple matter that the Gen1 image was not compatible with the Gen2 machines.  They would work for a little while, then break after a series of Windows updates.

  So I created my own image, repeat the steps above and for a while thought that the problem has been resolved.  But I just fell on my first 'disappeared' ethernet driver scenario; Since users employing 450 HP are usually off site, they need of working machinery.  But I have not found anything in the forums or through google search to indicate exactly what causes the problem.

  Currently, I use the HP of a DVD Software Wizard because the laptop has no ethernet connectivity to see if that solves it, but I'm interested to know what is causing this problem so I can avoid it in the future.  It's not good if users are bringing back machines to me who... was enough to say... do not work.

  I look forward to your correspondence.

  Best regards

  Robert

  Alrighty, I thought about it.  Essentially, (is no longer editable in the bios) LAN energy saving mode disables the NETWORK adapter, and once off, it will idle rest.  Therefore, your PC will not know to turn it on no matter how many times you restart or connect an ethernet.

  Here's the trick:

  1 unplug the power to your laptop, remove the battery, wait about 1-2 minutes.

  2. connect ethernet port NIC, connect the a/c, insert the battery.  Starts.  You should see your NETWORK card light up.

  3. once in Windows, go to the Device Manager.  You will see that your Realtek NIC listed.  Go into properties, power options and uncheck the option that reads LAN for energy savings.

  Problem solved.  I hope this helps the next guy.

  -Robert.

• Replacing my hard drive and the need to re - install Windows 7 upgrade. I need to install Vista first?

  I have Windows Vist and I'll upgrade Windows 7 make on my hard drive crashed.

  My question is can I install windows 7 fist or should I install vista first then windows 7.

  My question is can I install windows 7 fist or should I install vista first then windows 7.

  You should be able to properly install Windows 7.

• What 3115cn error code 117-363 average after a firmware upgrade failure?

  Hello

  I just got a replacement 3115cn after the former we failed in the warranty. I noticed that the firmware was old so just tried to update using the USB port and the printer is now saying to call assistance with error code 117-363. No power glitches or a bad power / data cables etc. He copied through the fine then just failed to complete startup after reboot.

  The only relevant fact that I can think is that the MPC had the latest firmware above as it has been transplanted across from the old, but the base firmware was older than the protocols supported in the CPC. That's why I tried to upgrade in the first place, I had lost a bunch of new features only have the old version of the installed base.

  I'll be the appellant first thing, but I wanted to ask if anyone knew in advance. (It would be a great help if each error code was listed on the web site of Dell, so I could get myself.)

  Kind regards

  Paul

  Message edited by paul_a_hill on 02/25/2008 17:39
  
  

• With the help of Robot Driver or driver Fetch after Windows 7 upgrade

  Just upgraded my laptop from Windows Vista to Windows 7 (64-bit).  Trying to get new drivers for Realtek devices and others, I am faced with downloads "Driver Robot" and 'Driver fetch' who want to register and PAY for the updated drivers.  Are these legitimate programs?  How can I get around them?  I don't have to pay to replace the drivers that came with my new computer!

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to the it.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• HP dv6-3042tx - replacement hard drive? Computer would not start after Windows update

  Hi guys,.

  I'd love to help I bought a HP DV6-3042TX about a year and half ago.  I hadn't used for a while and when I turned it on, he had to do updates etc. for windows 7.  These all downloaded and installed.  However after they have installed I couldn't restart my computer.

  I did a diagnostic boot test and got in return

  Memory test: PAST

  INTELLIGENT control: PAST

  DST short: FAILURE

  FAILURE ID: RLGD7S - 53: 662-XD002J-60QR03

  Product ID: WYRFSPA #ABG

  Hard drive 1

  This mean that my hard drive is actually dead and replacement needs? If so is anyway to recover my files and what model of hard drive can I replace it with?

  Any help would be great

  Thank you

  Hello

  The drive Self Test (DST) short error seems to indicate the hard drive is faulty and must be replaced.

  Regarding your existing files, a possible way to try to recover your files from a disk non-boot is following the process described in the link below.  The CD of the Ubuntu operating system you create can run from the CD alone (IE it doesn't have to be installed on the hard drive) and I've often found to successfully extract data even a hard failure.  When you created the CD, follow the instructions and see if you can save your existing files.

  http://www.howtogeek.com/HOWTO/Windows-Vista/use-Ubuntu-Live-CD-to-backup-files-from-your-dead-Windo...

  Replacing the hard drive is a fairly simple procedure.

  The player at the link below is an example of one that would be perfect for your laptop.

  750 GB hard drive for laptop.

  The procedure to replace the hard drive begins Page 55 of your & Maintenance Guide.

  Once this is done, simply use your recovery DVDs to reinstall the operating system on the new drive - see here for more details.

  If you do not have your recovery discs, you can order a replacement set using the link below.

  Order HP recovery disks.

  If you have a problem with this link, order them directly from HP.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

  Kind regards

  DP - K

• I bought the real book CD-rom, which inserts a link to the pdf files that are no longer be displayed in my firefox browser after the last upgrade to adobe reader DC.  How can I fix it?

  I bought the CD "The Real Book" which is a html interface that displays PDFs from the CD.  However, whenever there is an upgrade to adobe reader, it ceases to display PDF files and only displays a gray page indicating that an adobe plug-in is necessary.  How can I fix it?  (PDF files are sheet music).

  Hi jackd91021239,

  Please refer to this article:- display PDF in browser Adobe Acrobat DC, Acrobat Reader DC

  Kind regards

  Christian

• Aspire x 3950 - after windows 10 upgrade dvd/cd drivers missing

  After upgrade windows 10 cd/dvd drivers disappeared. Microsoft technicians have worked on this for 4 days could not find the problem. Can't argue with acer because the product is not under warranty. Any suggestions?

  Unfortunately, I don't have a recommendation on how to solve this problem, other than to go back to the previous installation of Windows. You can try to ensure that all Windows updates are installed. If that doesn't fix it, my best suggestion is to roll back. Given that this system was not qualified to upgrade the windows 10, we offer 10 Windows drivers for this product.

  Maybe someone else will have a suggestion on how to make it work you can try.

• My hard drive crashed and the only disk operating system that I can find is my Windows 7 upgrade disk. Can I do a full install on a blank disc of this?

  My title pretty much sums up my problem.

  I need to buy a new hard drive.  All I have is the Windows 7 upgrade disk I bought for some time.  I can the Windows 7 installed on this drive, or I have to buy a copy of Vista/XP to install and upgrade?

  If your computer comes with a qualifying previous license such as Windows Vista or Windows XP and the certificate of authenticity is still attached to the machine in good condition, then the COST is reason enough to represent the compliance to the software license agreement. No previous required software installation, which means you can do a clean install with Windows 7 Upgrade disk.

  How to do a clean install with upgrade disc:

  Boot from the Windows 7 DVD

  Click Install now

  Accept the license agreement

  When the option is displayed to select a type of installation, click (Custom advanced)

  Click on drive Options

  Select the disc/s click on Delete

  Click new

  Click on apply

  Click OK

  Click Format, and then click next to proceed with the installation

  Skip entering your product key Windows 7 and complete the installation.

  When you reach the desktop, click Start, right-click on computer

  Click on properties

  Scroll down to the Windows Activation

  Click the link x days before activation.

  Click on the link that says: "show me other ways to activate.

  Enter the product key

  Click next

  Select the Activation of the phone

  Click Next when you enter your key page

  Select your country

  Click Next, call the number listed

  Be sure to explain your situation to the Appeals Officer.

  Provide the installation generated when ID requested by the call agent

  They give a confirmation ID in return, enter it

  Click next to complete the activation.

  However, the requirements for the media upgrade is that you have an operating system already eligible such as Windows XP or Vista installed to use it. Since the Windows 7 end user license agreement.

  15 UPDATES. To use upgrade software, you must first be licensed for the software that is eligible for the upgrade. After the upgrade, this agreement takes the place of the agreement for the software that you upgraded. After upgrade, you can no longer use the software that you upgraded.

  So, if you are always denied, you will just have to reinstall Windows XP or Vista and let it do the verification of eligibility.

  or

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• Re: Driver Atheros AR956x for Satellite C50-A-156

  Hello, could - that someone provide me a link to the WLAN Driver Atheros AR956x, cannot not find one any where.

  What operating system do you use?
  Have you checked Toshiba download page-http://www.toshiba.eu/innovation/download_drivers_bios.jsp?

• Impossible to pass the BIOS back to 2.28 (Aspire E1 - 731)

  Hi, I have flashed accidentally BIOS version 1.17 on my Aspire E1 - 731 running win 8.1). Now it won't boot from the HARD drive. I am able to boot with win 8 from a USB (Win to Go) and tried to flshh back to version 2.28 BIOS but the program does not Flash it. I said that I must uograde to a similar version (1.x).

  Currently, he does not drive HARD and when I boot with the USB with Win 8, WIFI doesn't work.

  Is there a way I can Flash the BIOS to 2.28 so my computer working again?

  Thanks, I finally solved the problem by using the procedure described here: http://catchtito.blogspot.com/2013/05/how-to-update-to-2x-bios-from-1x-bios.html

  Works perfectly and my computer is now running.

• I get the 0x8078012D error code when I run the Windows backup on an external hard drive.

  I get the 0x8078012D error code when I run the Windows backup on an external hard drive.  I have Windows 7 Professional.  That suggests this error code is the problem and how can I solve the problem?

  For people who read this thread, I offer the following information.  I solved the problem by noticing that the problem could have been caused, when the system image is created.  So I did a backup without creating the system image and backup is complete without error.

  Then I used the backup program to create a system image.  This time error (0x8007045D) was displayed.   The error report says "the operation failed for a device error encountered with the source or the destination. If the volume of the source or the destination is on a disk, run CHKDSK /R on the source volume or destination and then try again using. »

  So I ran chkdsk/r, and this program is a bad sector on the hard drive of my computer and fixed the error.  It took about an hour to run the program.  Now, the image of the system and the backup of data file work again.

  So I think that the main cause of error (0x8078012D) is deborahgarbe of i/o error (0x8007045D).  So if you get the first error code you can search for fixes for the second error code fix the root cause.

• 09.0 "NVIDIA Windows Kernel Mode Driver display driver, Version 209.01 unresponsive and has successfully recovered".

  "NVIDIA Windows Kernel Mode Driver display driver, Version 260.99 stopped responding and has successfully recovered." My screen, hang up, then flashes, then turns off, then comes back on, the same month so much MORE Simple ERROR CODE? How do I stop this? With a SIMPLE ANSWER! (BUY A MAC)

  "It is not a true crash, in the sense that the blue screen was launched only because the combination of material and video driver video was to be insensitive and not because of any exception processing synchronous".

  Since Vista, the components of "Timeout detection and recovery" (TDR) of the subsystem video OS have been able to do some really impressive things to try to find issues that would have led to the earlier OS like XP to crash.

  As a last resort, the TDR subsystem sends a video driver command "Please restart you now!" and wait a few seconds.
  If there is no answer, the BONE concludes that the combo of driver/hardware video has really collapsed in a heap, and it fires at this stop 0 x 116 BSOD.

  If playing with video driver versions did not help, make sure that the box is not overheated.
  Try to remove a side panel and a fan of big sector directly to the motherboard and GPU.
  Run it like that for a few hours or days - long enough to check whether the cooler temperatures make a difference.

  If so, it could be as simple as dust accumulation and inadequate cooling afterwards.

  I download cpu - z and gpu - z (both free) and keep an eye on the video time

  For more information please read this blog http://captaindbg.com/bug-check-0x116-video_tdr_error-troubleshooting-tips/  

  http://msdn.Microsoft.com/en-us/library/Windows/hardware/ff557263%28V=vs.85%29.aspx