Aspire One 722 just took out of box will not connect to windows update.

Similar Questions

• Windows 7 will not update on an Acer Aspire One 722

  Hello, I have an Acer Aspire One 722 - A0722 - 64-Bit - I used the laptop and installed Windows 10 on it and it came to a crawl.  I decided to reset the computer to factory settings.  He succeeded, however, I can not install the updates of Windows.  I am running Windows 7 Home Premium with Service Pack 1.

  I tried to install updates for the first time without success and tried all the solutions I could find online.  I searched through forum after forum and tried all of the solutions that I found and not luck.  I installed several downloads, as recommended by Microsoft and not solutions.  I had subsequently to error code 8008005 and 0x8024402C and 0x8024001e.  I tried again the solutions and nothing has worked.  Most of the downloads that I did from herre: https://www.microsoft.com/en-us/download/windows.aspx

  I finally install CCleaner and updated to Explorer 11 I downloaded directly from the Microsoft Web site.  Who succeeded.  Nothing else has.

  So, I wiped out the computer again and reset to factory settings and am at square one.  I installed NOTHING else at this point expect try Windows updates.  All I get is the progress monitor to continue to operate.  It was 'running' and research updates for nearly 30 hours and nothing.  It still reads ' check for Updates ' and nothing else.

  Any help would be appreciated as I know what else to try.  This seems to be a common problem with no real solution at this moment that my search Google told me.

  Two screenshots are below.  Thank you for any help or advice.  At this point, the computer is basically unusable and it's very frustrating.  I spent hours and hours and hours and nothing.

  Thank you all and well be.    Brad

  

  

  Hello

  In fact, I found a solution that works!  I found this on another forum... Here is the solution...

  Hi I had this same problem, but it can be fixed easily, fist you need to do this update https://www.microsoft.com/en-us/download/details.aspx?i... There for 64 bit, before this, you must disconnect your wifi and LAN and uncheck the box you run internet settings where will be automatically connect when you start windows, and then restart your PC. Once the back is operational, run the update you just downloaded (make sure do not connect to the internet until the update is complete.  Reset.  Now that you have made, you must update the update here is the link to the DLhttps://support.microsoft.com/en-ca/kb/949104. Now, when it comes to restart your PC and go to update and this time it should find updates, can still take a little time, but usually get fist couple in 10 to 15 minutes.

  PS - It analyzed more than an hour before he found updates and started to download. Yes!  It worked... I also downloaded the downloads on a flashdrive from my desktop PC and installed on the Acer from the USB key.

  Thank you and well being.  Brad

• I'm locked out of my iphone5 not connected to my wifi at home and my home button does not work, any ideas on how to fix?

  I'm locked out of my iphone5 not connected to my wifi at home and my home button does not work, any ideas on how to fix?

  < re-titled by host >

  Take it to an Apple Store for repair or replacement.

• Windows Live Messenger will not connect automatically, even if the correct boxes are checked.

  Windows Live Messenger (WLM) will not connect automatically, even if the correct boxes are checked.

  WLM signs component snap perfectly when the Connect button is used, but simply refuses to connect when the computer starts.

  It happened once before but seemed to be linked to the use of the Google toolbar that I uninstalled this time without success.

  Post Windows Live questions in the appropriate forum found here:
  http://windowslivehelp.com/

• Ive just the program. It will not do what I want. I want a refund!

  Ive just the program. It will not do what I want. I want a refund!

  Hi amanda010

  Please contact the Adobe Support and they will help you with your refund.

  Please visit: http://helpx.adobe.com/x-productkb/policy-pricing/return-cancel-or-change-order.html

  You can chat with an agent via the top of the page or you can call the 1-800-833-6687

• Acer aspire one 722 battery does not charge

  Original title: acer aspire one battery 722 died waiting, does not, got new battery, same thing, can't find updates for 722, pc 2 years

  Hows that for a question? I started with 2 cans and a string now its internet. I googled my problem is the button to power down for what he can "reset". The another Aspire One are updated to fix this normal, falling asleep with netbook on standby and have the battery die. I don't know how to get out my files if I can send it to the India and back. I want to go to India not my netbook! I got a new battery of the India, but that did not help. Someone at - it sort of easy for me to get my netbook to detect my battery and load as it can get? I don't know how to copy and paste so helps to show my skill level.  Thank you

  Hello

  I would suggest trying the following steps and check.

  a. turn off the laptop completely.

  b. remove the battery from the bottom.

  c. leave the battery of the laptop for 5-10 minutes.

  d. plug the adapter into the laptop (still remove the battery).

  e. turn on the system and let it fully boot in Windows.

  f. once it arrives on the desktop to launch all startup items. In other words, do not interrupt the boot process until everything is prepared.

  g so go ahead and shut down the computer normally (using the START > turn off computer method).

  h. once the system is turned off, plug the battery back in and turn on the computer.

  For reference:

  Solutions to common battery problems

  http://Windows.Microsoft.com/en-us/Windows7/solutions-to-common-battery-problems

  I suggest you to save all the data if you are able to start the computer successfully before you send the laptop for service.

  If the problem persists, I suggest you to contact the Acer Support for assistance.

  http://support.Acer.com/us/en/default.aspx

  Hope this information is useful.

• Hi there I have an acer aspire one and I have a problem with my wireless connection.

  Hi there I have an acer aspire one and I have problems with my wireless connection.it is connected, but I can't use internet.any thoughts? Thank you

  A look at the "front" face, under the lip of the keyboard, similar to where a lock would be on a laptop. There is here a cursor that is not a lock, but it is a switch that activates / deactivates him wireless on and outside. Slide it on until it turns on the light above it (with the logo of the antenna), indicating wireless is turned on and drag it again to turn it off.

• After update to Firefox 32.0.3 print dialog box will not apear in Win7Pro/XP after awhile, but a restart of Firefox will allow him to appear again...

  After update automatically to 32.0.3 Thursday last Monday on the computers of all of our employees and boss both Win7 pro and XP pro, we saw Firefox sessions that will not bring the print dialog box. The print preview dialog box will return but no button print or print menu to display the print dialog box. After you close Firefox and reopen the print dialog box works again for some time. Web sites that use boss and staff during a session are different and appear to be the cause. Firefox settings are at fault because simply restart of Firefox just solves the problem and no other web browsers or application has any problem with the display of the dialog box print at any time. Again, that has started on all computers as soon as 32.0.3 was automatically installed during the night.

  Thanks Guigs2,

  Our users done restaring Firefox so I couldn't get this info.
  Now, it seems that the issue may have been corrected in v33.

• Drop-down menus does not open. Click right box will not appear.

  Hello!

  Yesterday, I was working on the Wix site. I noticed that when I tried to do a right click to copy and paste text box never showed up. I realized then, on other sites, in the drop down menus would not open (as the ones where you select your State, etc.). I can't turn on the bar menu at the top of Firefox with the ALT key, but when I click Tools or anything else, the box does not fall down. Same thing for my bookmarks and menu of frequently used buttons. My right click works fine when I'm not online. I really like to use Firefox and hope that there is a better solution than to switch to a different browser. I use Firefox at work and it's there.

  Please let me know if you need more information.

  Try Firefox Safe mode to see if the problem goes away. Firefox Safe mode is a troubleshooting mode that disables certain parameters, disables most Add-ons (extensions and themes).

  If Firefox is open, you can restart Firefox Safe mode in the Help menu:

  • In Firefox 29,0 and above, click on the menu button

    

    click Help

    

    then select restart with disabled modules.

  • In previous versions of Firefox, click on the Firefox button in the upper left of the Firefox window and click help (or click on help in the Menu bar, if you do not have a Firefox button) and click on restart with disabled modules.

  If Firefox is not running, you can start Firefox in Mode safe mode as follows:

  • On Windows: Hold down the SHIFT key when you open the desktop Firefox or shortcut in the start menu.
  • On Mac: Hold the option key during the startup of Firefox.
  • On Linux: Exit Firefox, go to your Terminal and run firefox-safe-mode
    (you may need to specify the installation path of Firefox for example/usr/lib/firefox)

  When the Firefox Safe Mode window appears, select "start mode safe."

  

  If the issue is not present in Firefox Safe Mode, your problem is probably caused by an extension, and you need to understand that one. Please follow the section Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems to find the cause.

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

• How is my scanner HP Officejet Pro 8500 all-in-one will not work on Windows 8?

  I just upgraded to Windows 8. My HP Officejet Pro 8500 A910 all-in-One printer works fine, but the scanner won't. I get an error message that says: cannot find the scanner. What can I do to correct this situation? HP has a driver that works with Windows 8?

  Did you uninstall this printer before the upgrade to Windows 8?

  If not, then I uninstall the software for the 8500 A910 and reinstall with the drivers up to date.

  The link here for the driver for the 8500 A910 page has e-all-in-one

  You can also get drivers for HP printers in Windows 8 by using the HP printer installation wizard.

• 4200 software all-in-one printer will not install in Windows 7

  I have a 4280 printer all in one that works very well with Vista 32 bit OS. I really like the interface of HP. I had a Dell with Windows 7 Professional 64 bit desktop computer. I was able to load without any problems except the printer.

  I downloaded the latest software of HP 64 bits for the device 4280. Installation takes place upwards the agreement "accept" screen and when I check the box to accept (name and c drive location, features to install, etc.) and then press the "continue" button disappears from the HP installation window. There is no reported errors or system events that I can find.

  I tried all the suggestions on the site of HP for Windows 7 with no luck. I found Windows 7 install a driver immediately once you plug the USB connection. Tried a new printer / I drive with no luck.  I tried Windows 7 32 bit with identical behavior that disappears. I tried safe mode and diagnostic mode in case something was interfering... same result.  At least antivirus and firewall have been disabled and nothing else worked. I even ordered a CD from HP with the same result as the downloaded program. CHKDSK and scannow will find no problem with Windows.

  I can run the printer and the scanner with windows drivers, but the interface, especially for the scanner is not functional enough. I get kind of work in a virtual XP environment, but it is very slow and a little less functional loading... vista vs XP I guess. In short not a viable solution. I could buy a new all-in-one, but I'm worried it will not install and this can become costly experimentation, not to mention my stock of the 4280 cartridge.

  I would really like to find a way to get the HP software to install. Someone has an idea?

  Hello again Tom5223,

  I see that we still have problems installing the printer on your computer.

  I suggest to call the HP Technical Support to see all the other possibilities for you. If you call in North America, the number is 1-800-474-6836 and for all other regions, please click here: click here.

  A representative of HP has the ability to use more advanced troubleshooting steps and will be better equipped handle a problem like this.

  Thank you for your time.

• Just upgraded to vCenter 4.1 - 4.0 most guests will not connect

  Hey guys

  I just upgraded (moved from 32 bit server to the 64-bit server using datamigration tool - upgrade sql db - which is on a different server).

  For some reason some 90 percent of my ESX 4.0 host does not connect or are not easy to manage.

  I get the error failed to install the Vcenter agent service.  Cannot download agent.  And then it prompts you through the windows of intiali to manage an ESX host, that after the user name and password, I get the same error... cannot download agent...

  any tips? TIA!

  In addition, since I migrated to a used server... .the migration data/info, when you are logged in the Vcenter, it shows the old name of the server upstairs - I noticed there is a change of name option, if I rename will there be problems?

  Try some suggestions in the KB below

  http://KB.VMware.com/kb/1003714

  However, what happens if you restart managers on one or multiple ESX hosts in question and then try to add in vCenter?

  service mgmt-vmware restart
  

• The myfitnesspal website is most compatible with you? It will not connect, but works with all other browsers. I did help out. Did not work.

  Yesterday, I had problems with the Myfitnesspal.comwebsite. I have a tab set to open automatically when I start the browser every day. I could not connect any information in the site, so I tried a log off and log in. It doesn't let me log on to the site. I contacted, myfitnesspal and we worked through many steps in troubleshooting. I also tried all the steps of troubleshooting your site. I even made a full stop and start my computer. Nothing has solved this problem. I had the same problem with a couple of store that I like to go. The shop site work finally after more than six months of frustration. Myfitnesspal works on all other browsers. So with everything which has been tried and done, the problem seems to be your side somewhere. I'm running Windows 7 Professional 32 bit.

  I really hope that this could be solved because the site appears better on your browser. If you have any questions, feel free to send me an email.

  Thank you for what you can do about it, and for your time.

  Hello.

  I used to have this problem with Firefox only for some time. I was frustrated beyond. MyFitnessPal is 100% compatible with Firefox, however, some extension (type of) can cause significant headaches. I hope that this fix also helps.

  Do you by chance the https everywhere extension installed? It's a great add-on and I strongly recommend using it, however, unless you "disable" its use with MyFitnessPal, you will not be able to connect to your account, add food, weight update, see graphics, etc..

  So don't panic. Your question is likely to be what I had as well. I just went in the https everywhere extension and where it says "MyFitnessPal" with a checkmark (saying it is ACTIVE for the site), I simply clicked to disable the add-on for a site.

  Simple and it works instantly. I hope it does for you too! If you do not have this add-on so it is probably related to some thing similar so good luck to you!

  D

• One of the dials on speed dial will not erase

  When I try to change one of the dials on speed dial in Waterfox numbers, it will not allow him. It does ok until I launch Waterfox and returns the old dial. It is the face of hell.
  Help!
  Thank you

  Hello

  You can try to install Speed Dial in a new profile and check.

  KO

  Support

• I have a NVidia GTS450 with HDMI output. When I connected it I had sound & vision. After the first time that I turned off the desktop computer sound options just told me THAT HDMI is not connected?

  I am running Vista Home Premium 32 bit. It does not seem to recognize the connection although it is really connected and one / v amp is running. I get the desktop on the HD TV but no sound.

  Hello

  By default the Vista transmits no sound on HDMI output.  To change this to change the settings in the control panel.

  Note: This will turn off sound from speakers or normal audio output on the laptop.  To get that back, you will need to reverse this process.

  a. click on the button 'start '.

  b. click on 'control panel '.
  c. with the control to the "Control Panel Home" Panel, click on 'hardware and sound '.
  d. where it says 'Sound' in green letters, there are three options below that are in blue, click on "manage Audio devices.
  e. This will bring up a window titled "Sound".
  f. on the tab 'Read', he has listed the sound options at your disposal. It should read "peripheral digital output (HDMI)" click on it.
  g. There should now be a checkmark on this option.
  h. the sound should play through your HDMI connections to the TV.

  No sound in Windows

  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

  Tips for solving common audio problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-sound-problems