Aspire One d255 does not recognize the usb connected external ssd drive

Similar Questions

• Satellite A200-1AE does not recognize the USB 2.0 flash drive

  I have a problem because my satellite A200-1AE with Microsoft Vista does not recognize the USB 2.0 flash drive. He asks me a program/software!
  The same USB works without problem on other computers with vista!

  Someone knows what to do?

  Hello

  First of all, you must disconnect all USB devices and must remove the USB ports and controllers in the Device Manager.
  After this procedure, you must restart the laptop. After a new restart the Vista operating system should recognize the USB ports and should reinstall USB drivers again.

  Then you must update the Vista to the State! All fixes and patches must be installed. Please note that you will have to visit the MS Update site for all patches

  Notes; MS has released a beta of Vista SP1. I installed it on my laptop and it has solved several problems.

  Best regards

• Windows 7 does not recognize the new WD external hard drive added to the usb port

  Recently, I tried to add my third USB WD hard drive to my computer.  It's a My Book Essential.  The meter turns and the virtual cd drive is listed in WD, but the hard drive itself does not appear on the list of devices with a drive letter.  My my first two books are readers: J:, and L: I have no "new device found" message   I search for new devices and it the PC do not find anything.  If I click on the virtual CD drive (M :) it askes if I want the computer to allow WD to make changes...) I say Yes and the screen flashes and nothing happens.
  The drive be defective?  Any other ideas?

  Hello

  Have you tried to connect the external hard drive on another USB port?

  Try to connect the WD external hard drive on another computer.

  Follow these steps:

  Method 1: You can run the troubleshooter in the following article and see if this fits the Bill.

  Open the hardware and devices Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Also, run the Fixit.
  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Method 2: Check if the external hard drive is recognized in disk management and assign a drive letter to the same.

  To open disk management, follow these steps:

  a. click Start, type disk management in the start search box and press enter.

  (b) if the drive is detected in disk management, I suggest you to assign a drive letter and see if that does the trick.

  For instructions, see this article change, add, or remove a drive letter

• DreamColor LP2480zx does not recognize the USB for calibration

  Hello

  I have a DreamColor LP2480zx, which does not recognize the USB connection to the computer during calibration.  I have my eye HP connected through this monitor, so I know the connection and the cable is good and mouse, keyboard.  My setup is like this:

  Reference Dell 690 running 64 bit + Windows XP

  DreamColor LP2480zx

  Apple Cinema Display 23 "

  I bought the DreamColor used, and in all other respects, it seems to work very well.  The original owner didn't have it calibrated within a certain time, but said that having had no problem with the previous calibration.  I installed the last APS (version 2.0) and updated to the latest firmware.  These updates produces no change in recognition USB problem.

  The interesting thing is, I was able to calibrate the Apple Cinema Display, using the same configuration of connection (mouse, keyboard, and HP eye connected to the computer via the LP2480zx) APS was able to see the USB connection and this very well calibrated monitor.

  I had trouble with this problem for a few days.  I've looked around quite a bit online and found a few others who have this same problem, but I did not yet find someone who can point out a solution.  If anyone has had this same problem, or has heard of results that correct it, please let me know, because it's very frustrating.

  Thanks for any help

  Clay

  An update to my previous post, I realized a work around for this problem.

  Apparently, this problem has to do with the Dreamcolor screen and/or software APS do not like working with 64 bit systems.  I'm not saying that it is always the case, but I saw the other posts on this problem on 64-bit systems, and I spoke with two other people personally who told me that they also had the same problem, try to calibrate its Dreamcolor monitor when it was attached to a 64-bit system.  HP does not seem to be concerned about this problem, because they do not even recognize its existence, but since I'm far from being the first to report this problem, he's obviously not a one-time problem.

  My solution was this: I had connect the monitor to a regular running XP 32 bit system.  After I did, I could re - calibrate the monitor without the problem of USB connection.  This isn't a very good solution because not everyone has access to several machines, running different operating systems.  But it's a work around, and it worked for me.

  Hope this helps other people who have this same problem with their Dreamcolor monitors hooked to their 64-bit systems.

  Clay

  PS- I posted this as resolved, only because I was able to calibrate my monitor.  It's not really solved the problem, but it gets the monitor working again.  Maybe HP will address this problem in the future, but I'm not holding my breath.

• Lite-On ENAU108 CD Burner IT does not recognize the USB key

  Windows Media Player does not recognize the USB drive letter

  Although the Windows Device Manager recognizes it.

  I want to add drive from the device to WMP

  Hello

  1. have you made any hardware changes or software on the computer before this problem?

  2 - is the USB key in Windows Explorer?

  3. you try to transfer music files from the USB key?

  4. what version of Windows Media Player do you use?

  If you use Windows Media Player 11 & try to add media files in Windows Media Player, you can follow these steps.

  a. open the Windows Media Player, click on organize > manage libraries > music.

  b. click Add and navigate to the location where the file is stored in the Windows Explorer.

  
  Reference: Add items to the Windows Media Player library

  Hope the helps of information.
  Please post back and we do know.

• For some reason any, that my printer has enough work and when I plug in my camera to download images, the computer says it does not recognize the USB port, which could be the pronblem?

  My printer does not work (it is said that the computer does not recognize the USB port (this also happens when I plug my camera to download the photos) I checked everything I know to check, which isn't too.)

  My printer does not work (it is said that the computer does not recognize the USB port (this also happens when I plug my camera to download the photos) I checked everything I know to check, which isn't too.)

  When did this problem start? What did you change shortly before it all began?

  Please quote the exact text of the message you get, verbatim.

• Win 7 Backup and Restore does not recognize the USB flash drives.

  Win 7 Backup and Restore does not recognize the USB flash drives for a backup image or a recovery disc.  Given that Windows 7 Starter Edition is used in many, if not most of the netbooks and netbooks have no optical drive, support for flash (thumb) drives would be very handy, especially for repair and recovery.

  Back up and restore: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-and-restore-frequently-asked-questions

  You can't save backups to a flash drive, you need an external USB hard drive.

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• Laptop does not recognize the usb mouse or the internal speakers.

  The laptop does not recognize the USB mouse. I have re installed the drivers from the site of the constructor (HP), but it still does not work.

  In addition, the internal Laptop speakers no longer work. There is no sound coming out of the laptop and it does not recognize the external headphones plugged into the headphone jack.

  I ran several troubleshooting utilities (audio playback, FixIt) and they are no help.

  Hello

  Thank you for keeping us posted.

  Sorry for the late reply.

  I imagine the inconvenience that you are experiencing. However, I appreciate your efforts to resolve the issue.

  I would suggest trying the following methods and check if it helps.

  Method 1:

  How to use the tool File Checker system to repair missing or corrupted system files,

  Please follow the steps in the link provided below.

  https://support.Microsoft.com/kb/929833?WA=wsignin1.0

  Note: System File Checker is a Windows utility that allows users to find corruptions in Windows system files and restore the damaged files. This article describes how to run the system (SFC.exe) to File Checker tool analyzes your system files and to repair the system missing or corrupt files in Windows or Windows 8 8.1. If a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected.

  If the problem persists, follow method 2

  Method 2:

  Run a full scan of the computer with the Microsoft Safety Scanner to make sure that the computer is virus-free.

  Microsoft, security scanner please follow the steps in the link provided below.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: data files that are infected must be cleaned only by removing the file completely, which means there is a risk of data loss.   

       

  If the problem persists, follow method 3

  Method 3:

  I suggest you try the steps from the following link and check if it works.

  No sound in Windows.

  http://Windows.Microsoft.com/en-us/Windows/no-sound-help#no-sound=Windows-8&V1H=win8tab4&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  For the problem with the USB mouse, there could be a possibility that there is a conflict of material with the mouse.

  I suggest you to try some other USB mouse with the laptop and check if it works.

  I hope this information is useful.

  Please let us know if you need more help, we will be happy to help you.

• Windows 7 64 bit does not recognize the USB external drive HARD Stor E art 3.5 "

  I buy the art external disk HARD Stor E 3.5 "and spend a few days in windows does not recognize the HARD drive. Try to connect the drive to other USB 2 ports and nothing happens. Use a USB to see if has been a problem with the USB ports, but all 3 are OK. Try it on the laptop Asus and windows 7 recognizes the HARD disk. I formatted the drive in NTFS FS. In managing records do not show the external HARD disk. What can I do to fix this?

  My laptop is a Qosmio F60

  This is a really silly situation. It can be recognized by other laptops but not your Qosmio.
  According to the description of your HARD drive when connected simply doesn t exist for your Qosmio laptop.

  Some other HDD is recognized correctly?
  What you can try is to reinstall the chipset driver, restart the laptop and test it again.

  Since when you have this problem? Some installed updates of the last days?

• Windows does not recognize the USB key for backup

  Windows does not recognize my USB drive for backup. Windows seems to give this option, but requires that I have to use a disc in drive D. How can I change this?

  Original title: Windows 7 backup

  With USB installed & in the office, go in run, type: diskmgmt.msc

  MSC, locate & L.click on hardware, go to actions, all, select: activate

  closing of msc

• Satellite Pro 6100 does not recognize the single battery external power

  Whenever I have start Satellite Pro 6100 Win XP Pro with standard battery mounted and connected to the power supply computer laptop does not recognize the ext battery supply single supply and during 'start-up' goes into hibernation.

  By pressing the power on button laptops "wake up" and indicate that the battery is empty or may not even decide when completely loaded, then says connect the station even if still connected, looking under Toshiba console when it runs shows running on battery when still in the power of the ext?

  I have two batteries and both give the above symptoms even when I remove ext of laptop power always runs with power supply by battery but no light orange or green for battery.
  Any ideas?
  Concerning
  Phil

  Hello

  Is your AC adapter malfunctions or there is something wrong with the power supply to electronic s laptop.
  In the first case you could purchase a new compatible AC adapter and could check if the laptop can run successfully.
  The second possibility is a serious hardware problem, but in this case, the laptop must be checked by an authorized technician.

• Aspire V does not recognize the USB/phone device. Why not?

  Why does my laptop recognize my phone more?       He knows some device USB is plugged in, but it does not recognize.

  Download and install the USB Samsung drivers:

  http://www.MoDaCo.com/forums/topic/361286-26122015-latestsamsung-USB-drivers-for-mobile-phones-15550...

• Recovery media creator does not recognize the USB 32 GB on Satellite L750?

  I hope that there is someone here who can help you:

  My computer is a computer L750 x 64 based Satellite and the problem is that the sound disappears after a few seconds, when I hear the music from Youtube.

  I read in the preinstalled usermanual can I restore the computer pressing F8 when the computer starts, but it does not work.

  The continuous computer just on Windows 7.
  Now I want to restore the computer to the factory standard and will therefore use the Recovery Media Creator but it does not work.

  I want to save data on a 32 GB USB key, but it will not recognize the stick.
  I know that 32 GB is without error, because I can easily store / retrieve data either with FAT and NTFS systems.

  What I am doing wrong and is there anyone who has a good idea, so I can spend?
  best regards Erik

  Even if your USB is working correctly outside of the recovery media creator, this does not mean that it should be handled properly by this tool.

  I had problems creating recovery DVDs even though I was able to burn video files on the same disk.
  As far as I know you must take at least 16GB USB flash memory stick
  Usually, this should work.

  But I m wondering why you are not able to use HARD drive recovery option. Have you changed anything on the HARD drive?

• Computer Windows Vista does not recognize the USB mouse

  Original title: does not recognize usb devices... Im trying to use the mouse... got a new mouse... still does not recognize it

  worked but stopped, got a new mouse and still does not recognize it. I really need it... help please

  Hello

  
  1. do you get an error message?
  2. would either not detected other USB devices in the same port?
  
  Method 1: perform the steps in the article mentioned below and check if the problem persists.
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices
  
  Method 2: run the Fixit and see if the problem is resolved.
  http://support.Microsoft.com/mats/hardware_device_problems/en-us
   
  Method 3: update the chipset drivers and see if the problem occurs.
  Note: you must contact the manufacturer of the computer to update the chipset driver.
  
  Hope this information helps.

• Windows 7 does not recognize the Patriot 256 GB Flash Drive

  My work computer (Windows 7 OS) does not recognize my drive 256 GB Patriot Superperformance XT flash.  My computer (Windows 7) Alienware recognizes very well.  The computer does not recognize it makes a strange noise when I plug.  Is there a setting I need to change so that it is recognized?  I also have a 64G flash drive XT patriot who is recognized at the end of my work computer.

  Hello Chuck,

  Thanks for posting your query in Microsoft Community Forum.

  1. You did it any significant hardware or change software on the computer before this problem?
  2. Do you have an error message when it is not detected? If YES, what is the exact and complete error message that you receive?

  I understand that the USB device is not detected by your computer. The question may arise if the currently loaded USB driver has become unstable or damaged or if your PC requires an update for problems that could conflict with a device USB and Windows. This can also occur if your USB controllers may have become unstable or corrupt. So, I would suggest trying the following steps and check if the problem persists.

  Method 1:

  Please the fixit (s) following provided below. They will help you solve common problems related to devices, and USB ports.

  • Hardware devices do not work or are not detected in Windows
  • Diagnose and automatically fix the Windows USB problems

  If method 1 does not work, try Method 2.

  Method 2:

  Remove and reinstall all USB controllers.

  1. Open Manager devices by clicking the Start button, click Control Panel, click system and security, and then, under System, clicking Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  2. In the list of the categories of equipment, locate and expand Bus USB controllers.
  3. Right-click every device under the Bus USB controllers node and then click Uninstall to remove them one at a time.
  4. Restart the computer and let the USB controllers get reinstalled.
  5. Plug in the removable USB device and test to make sure that the problem is solved.

  If the problem persists, go to method 3.

  Method 3:

  This method will install the latest drivers from device to your USB device.

  1. Click the Start button, type Windows Update in the search box, and then click Windows Update in the results pane.
  2. Click find updates. When the scan finished, click optional review updates.
  3. Click the check box next to the update, and then click install updates.
  4. If you are prompted, read the license agreement, then click I agree.
  5. Follow the instructions on the screen to download and install updates.
  6. If you are prompted, restart your computer.

  More information: http://Windows.Microsoft.com/en-US/Windows7/Update-a-Driver-for-Hardware-that-isn ' t-work properly

  Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.