Aspire S7 Touch Pad does not work (fn + T doesn't help)

Similar Questions

• Satellite C50D - B - 11 X - touch pad does not work

  Hi I have a C50D - B - 11 X Satellite, I've upgraded to windows 10 and now the touch pad does not work, the cursor is located in the middle of the screen, can anyone help.

  Check if the touchpad would work after uninstalling the driver for touchpad of programs and features that you can find in the control panel...

  I'm not sure that the touchpad driver developer but the Synaptics touchpad driver or MOMENTUM... you may need to check this...

  After removing the touchpad driver, please restart the system.

• I have a Toshiba satellite L455D laptop and the touch pad does not work

  If I plug my usb wireless mouse that works, but when I unplug it the touch pad does not work

  Have you checked to see if your laptop model has a physical button around the mouse pad that allows & turns off?  If it does not, many cell phones often have a software switch that can toggle the on & off power mouse pad.  It is usually triggered by a combination of function keys (key Fn + one of the F1 to F12 keys).

  Take a close look at the row of the top of your keyboard and see if you can find a key that has a small symbol that looks like a mouse pad.  If you find one, try pressing it in combination with your Fn key to see if your mouse pad features returns.

• HP 15 ab019na: clicking on the touch pad does not work

  My laptop newly purchased has just been upgraded to Windows 10. My problem is with the touch-pad. Clicking on most of the things with it (left or right) turn simply on the element, but it does not open the item. For example, the cross that appears in the top right, to a screen, to cancel this screen does not when you click on it. I have to touch it with my finger so he could work (the laptop's touch). A lot of hypertext links do not open when you click on it, but their contact works. The Start button at the bottom left does not open when you click on it, but it's when they are affected.

  Clicking is sometimes more convenient than touch, so I would if the issue is resolved.

  Hello @Gallant,

  Thank you for visiting the HP Forums! A place where you can find solutions for your problems, with the help of the community!

  I read your post on the issue of the TouchPad and wanted to help you!

  Please consult the following document and let me know how it goes:

  HP Notebook PC - using the touchpad and ClickPad (Windows 10)

  Please let me know if this information has been helpful by clicking the thumbs up below.  If this post has solved your problem, then please click accept as a Solution.

  Kind regards!

• Stream laptop HP 11: after the update of windows 8.1 Windows 10, the touch pad does not work

  My Hp Notebook PC 11 Stream works fine on Windows 8, 1 until I updated to windows 10. Now the touchpad is dead. I have to use a USB mouse.  In Device Manager, all the drivers work fine. Any clue?

  Thank you for visiting the Forums HP's Support and welcome.

  Information below can help you

  Make sure your keyboard is on

  Check in the settings 'Mouse & touchpad' to ensure that the touchpad is enabled.

  Open the Settings menu (Start > settings) and go to devices > Mouse & touchpad. Scroll to the bottom of the screen, and then click additional mouse options.

  The mouse properties window opens. Click on the tab more far to the right (it may be called MOMENTUM ordevice settings). Under devices make sure your keyboard is not disabled. If it is disabled, click on the touch pad to select, and then click Activate.

  Another thing to try is to see if your laptop has a function button that enables / disables the touchpad. It should look like a tiny touchpad with a diagonal line through it (on my computer laptop is F6, on other laptops we Fn + F5, Fn + F6 , or something else entirely). Try to switch this key if you have before you panic on the misfortunes of possible touchpad.

  Update your drivers

  Windows 10 has been out for a few months now, and most of the manufacturers of touchpad have updated their drivers accordingly. But you may need to manually update your driver.

  There are two ways to do this. First, click on the Start button and select Control Panel. In the Control Panel window, open the Device Manager.

  By clicking on "update driver software... "will your computer Internet search for an updated driver.

  Best regards;

  Marcel

  I am an employee of HP

  Please click the White Star Kudos to say thank you for helping.

  Please check accept as Solution if my help has solved your problem.

• My touch pad does not work. How to activate it?

  Usually, I use a wireless mouse but want to use the touchpad.  I'd appreciate any help you could give me!  May not know where to go to find an answer.  It cannot be hardware and drivers.

  Hello

  It is re - activate if you remove the mouse from the computer?

  Check with support of the manufacturer system, documentation online or forums that there is probably
  Shortcut keys that enable and disable the touchpad functions.

  Parameters for TouchPad located in the control panel - mouse (there may be several tabs with TouchPad entered)
  and some come with a utility that loads in the Notification area next to the clock in the bottom right.

  ==========================================

  If necessary: (make sure that you have restarted at least once, if the above did not work)

  Panel of configuration manager devices - mouse and pointing devices - Double click on the touchpad - the driver tab-
  Click on update driver (it comes may not do anything like MS is far behind the drivers of certification), now right CLICK
  on the TouchPad and UNINSTALL.

  Then go to the USB and UNINSTALL ALL controllers except the category itself (all in). RESET

  This will refresh the driver for the TouchPad and battery USB. This does not prevent the touchpad from working.

  The similar procedure on XP, Windows 7 and Vista is the same, except that we need to clear the specific device if present.
  http://support.Microsoft.com/kb/310575

  Then go to the system manufacturer's website and get the latest touchpad drivers.

  Download - SAVE - go to where you put it-click on - RUN AS ADMIN.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• How can I activate my touch Pad? a light is on and the touch pad does not work

  I have a Toshiba laptop and the touchpad equipped with a bright power who insists to stay on and do not let me use the touch pad.

  How to turn off the light or enable the touchpad please

  Thanks in advance if you can help

  R

  I have a Toshiba laptop and the touchpad equipped with a bright power who insists to stay on and do not let me use the touch pad.

  How to turn off the light or enable the touchpad please

  Thanks in advance if you can help

  R

  Your touchpad driver is maybe defective. Go to the Toshiba website from the link below and enter your laptop model number and the operating system that you will find on a label on the back and download it and install it the Touch Pad Driver and see if that fixes the problem.
  http://www.MyToshiba.com.au/support/download

• HP Pavilion 15-N010TX: laptop touch pad does not work

  Hello, I have the HP Pavilion 15-N010TX. I connect a usb laptop headset, then leave my touchpad has stopped working. I tried to activate it by typing double in the upper left corner, its not work. Then I went to change the setting of the mouse, their i am not founding option toggle. I then in Device Manager their i do not found the mouse in the list. And then I tried the download Synaptics and followed the instructions but it didn't work. Even I tried to reset hard too, but the result is the same.

  Please, help me out of this problem.

  Dear customer,

  Welcome and thanks for posting your question on the Forum of Support HP

  Looks like you are facing difficulties to solve problems with your laptop Touchpad

  We will surely help you with this

  Steps to drain the static charge and load the BIOS default settings to solve the problem

  Step 01. Turn off the laptop

  Step 02. Disconnect the power/AC adapter and also remove the battery too

  Step 03. Press and hold the power button of the laptop for a minute

  Step 04. Now re - insert the battery back in and plug again the power supply/adapter

  Step 05. Start Notepad and keep pressing the F10 key during startup to access the BIOS

  Step 06. Once you get the BIOS, please press F5 or F9 key to load the default settings for the BIOS

  Step 07. Now press ESC/ESC. Save Changes and Exit - Yes

  Step 08. Now, please wait until the unit load the Windows operating system

  Now please download and reinstall the drivers from the touchpad for your laptop on the Site of HP Support

  Please click the link below to learn more the following steps to resolve this problem of troubleshooting

  http://h20565.www2.HP.com/hpsc/doc/public/display?sp4ts.Oid=5229455&calledBy=&docid=emr_na-c03523373-5&docLocale=

  Hope this helps, for other queries in response to the post and feel free to join us again

  * Click on the white button on the right to say thank you Thumbs Up *.

  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

  Thank you

  K N R K

• Satellite A200 - touch pad does not work with Windows 7

  Hello

  I have an A200 and that you have upgraded to Windows 7. Can someone help me with how I can get the touchpad to work?
  I would be very gratefull for any advice.
  Thanks in advance

  Stand by. What is the problem with the touchpad?
  Touchpad completely lack of functionality or you miss just function additional touchpad?

  Did you install driver touchpad?

• My computer touch pad does not work

  My model is VPCSB18GG

  How can I make it work?

  is this a hardwear problem?

  TRY DOWNLOADING THE SOFTWARE LOOKS UPWARD ON SUPPORT

• At the start of Vista, the touch pad does not work perfectly.

  When I start my pc the touchpad doesn't work perfectly, but if at the same time, I press Ctrl Alt and DEL and wait for a new screen to appear and then move the pointer to cancel and hit him, the original home screen reappears and the touchpad works properly.  How can it be arranged that the touchpad works properly from the outset?

  Hello

  Check if the problem occurs in safe mode.

  Refer to this article for help:
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

• My built in mouse pad does not work

  My built in touch pad does not work.  How can I solve this problem?

  Hi LisaGreenberg,

  I'm sorry to hear that you're having trouble with the mouse pad.

  Before you start with the troubleshooting steps, I would like to ask you a few questions.

  (1) Windows operating system you are using?

  (2) what is the brand and model of the computer?

  (3) you receive any code or an error message when you try to use the mouse pad?

  (4) have you made no changes before the show?

  Please follow the link and check if that helps.

  Mouse, touchpad and keyboard under Windows problems: http://windows.microsoft.com/nl-BE/windows/help/mouse-touchpad-and-keyboard-problems-in-windows

  Please answer we help you solve the problem as soon as possible.

• Toshiba touch pad does not

  HI.i have a Toshiba Satellite U300-113 laptop and the touch pad does not work. I tried to look for it under the mouse settings, but it is not there.it shows that the external mouse device.i visited recently and it worked then and when I came home and tried to use the touchpad, he did not. PLEASE WHAT DO I DO? the external mouse works properly, but I really prefer the built-in mouse.plus when you are carrying the laptop around for portability, it is quite difficult because I have to carry an external mouse wherever I go.

  Please, I would like to know if a solution can be found as soon as possible please?
  Please specify your guidelines so that I'll know what to do.
  Thank you.

  We hope that your touchpad device is not physically damaged in any way or has gone wrong.

  Then...

  Type device manager in the start menu search. You can also access it by right click on computer > properties and look for a link called the Device Manager on the left.

  In the device, search for 'Mice and other pointing devices' Manager and see if everything is there. Using my computer for example, I can see «Synaptics PS/2 Port Touchpad» If you see something like that, then you have a few choices.

  Right-click on it and choose:

  Update driver software - update the driver software to the latest version if found on the computer or on the internet.

  Uninstall - Uninstalls the driver entirely.

  I suggest try updating first. If this does not help then do an uninstall (it may disappear when you do this). After uninstalling, look up and you'll see a few icons. Place the cursor on them until you see the description "Check for changes on the hardware" and click on it (the icon should look like a computer with a magnifying glass). The unit should reappear, right click and reinstall the driver.

  Note: If you double-click on a device, you can see the status of the device. It should say "Device works properly."

  Note #2: Also on the Toshiba site, I can't find the drivers Toshiba Satellite U300-113 and support page. I see U300-ST3091, U300-ST3092 and U300-ST3094.

  User

• Satellite NB10T-A-101 - mouse pad does not work

  I have a touch screen for Toshiba Satellite NB10T-A-101, the touch screen works very well but I use mostly the mouse pad I find using the slider easier.

  But recently my guarded cursor freezing for a second or two and then to spend once again, but now the mouse pad seems not working with the left and right click buttons work but not the touchpad.

  I made sure the touchpad is enabled in the mouse settings, so I don't really know what to do now.
  Any suggestions would be greatly appreciated
  Thank you

  Hello

  Have Hmm you also checked the FN + F5 key combination?
  This would enable and disable the touchpad as well.

  But from my point of view, it would be possible that the touchpad module is malfunctioning.
  I m thinking about the hardware malfunction because the touchpad buttons work and just touch the touch work area module doesn't correctly.

  Usually, if the touchpad would be handicapped by any software, both; as well as the touch buttons does not work.

• Satellite L775 - mouse pad does not work properly

  I have a laptop Toshiba Satellite L775. I run Win 7 Home Premium. My mouse pad does not work properly. I also have a Logitech Anywhere MX wireless mouse. I tried the mouse pad to work properly with the key FN and F9, but it does not work. And you really have no idea if that turns or out of the mousepad anyway, subj for another time I guess.

  What does not work, but I have to do is to go to Control Panel then mouse option load that and just scroll the tabs without changing what each time and then close and the touch pad works. But only for this session. If I have my laptop nearby, or turn it off, I have to start throughout the whole process.

  What's past and how to fix this?

  Thank you very much.

  > What's past and how to fix this?
  After reading your ad, I still don t know what is your problem.
  > My mouse pad is not working properly
  How to understand this? What does not work properly? What happen exactly when you start your laptop?