Aspire screws (three) S7-391 missing

Similar Questions

• Three fingers slip missing?

  Updated for Sierra last night. Apart from duty uncheck and recheck some of the scrolling options in trackpad preferences, everything seems to have gone smoothly. With one exception - three fingers slip is no longer works. I had gotten really used to not having to actually on the trackpad almost never. The possibility to activate the slide three fingers seems even to be there. I forgot something, or I'll have to install BetterTouchTool on this MBP?

  Your options

   > Sys preference > Trackpad

• Aspire SA80 Ethernet Controller driver missing

  My windos 7 pro 64-bit desktop ethernet controller driver is missing! I need the driver as soon as POSSIBLE! PLS HELP, I can't connect to any internet even connect the power cable for the LAN, and I find not too connect to the local network.

  My hardware ID:

  (1) pci ven_1039 & dev_6330 subsys_0c4c105b & rev_00

  subsys_0c4c105b ven_1039 & dev_6330 pci 2)

  (3) pci ven_1039 & dev_6330_030000

  (4) pci ven_1039 & dev_6330_0300

  Help, please

  You can not install it on a 64 bit OS, you need to install windows 7 x 86 (32 bit)

• Acer Aspire Aspire E1 - 510 ram ddr3l missing 2nd sodimm socket on motherboard

  I have Acer Aspire E1-510-35204G50Mnkk and 4 GB of RAM making, I would like to upgrade with an another 4 GB of memory, but physically there is no second plug for so dimm ddr3l memory of ram on the motherboard. There is place for it on the motherboard, but no plug to plug the ram.

  what I can and where to buy second taken, this metal thing on the motherboard and use also second ram memory?

  Thanks in advance

  The second slot was an option on some variants E1-510. If you simply want to renovate a second take is hard to say because there may be additional components necessary.

  However, the easiest solution would be to simply replace your current 4 GB of RAM with a suitable 8 GB of RAM (which is the maximum for the only hold on your machine). (One or two variants both have a max of 8 GB RAM.)

• Aspire black screen S7-391

  I have this pc and turn it on, but all I see is a black screen. No logo, nothing.

  I tried to push the power button to reset dry 30, pressed the button of the battery on the back, removed the battery and the ssd, ran Fn + Esc with the BIOS on a flashdrive - nothing works.

  Œuvres of power, yet all black.

  Any ideas? Anyone?

  Memory IC is probably faulty (memory shared with the Intel graphics controller).

  Unfortunately, all components are directly soldered on the motherboard (all-in-one):

  CPU, memory, WLAN, BT, and RTC battery.

  I guess that your laptop is out of warranty.

• I have version 29.0.1 and frequently the top right three boxes (min, max, quit) are missing. How should I do?

  Since the installation of version 29, I had this problem where the three boxes are missing. It happens sometimes that I start FireFox. I can right-click in the min, max or closing of FireFox and area. I never had the problem before. I have an i7 processor and on Windows 7.

  The boxes are not visible (i.e., they show a ToolTip if you hover and work if the click in this area) or whatever should not happen at all?

  You can check the problems caused by a corrupt localstore.rdf file.

  • http://KB.mozillazine.org/Corrupt_localstore.RDF

  You can check for problems with preferences.

  Delete a possible user.js file and files numbered prefs-# .js and rename (or delete) the file prefs.js to reset all the prefs by default, including the prefs set via user.js and pref which is no longer supported in the current version of Firefox.

  • http://KB.mozillazine.org/Preferences_not_saved
  • http://KB.mozillazine.org/Resetting_preferences

• screws missing from the bottom of the laptop (S3 - 392G)

  Hello

  I have a used s3 - 392 g Acer laptop and I noticed that some of the screws on the bottom are a little loose and it has actually fallen!

  I was wondering where I could get replacement screws? There are many online auction sites, but I'm not sure what I need and I can't find more info online. The screw that I'm missing is one of those on the bottom of the laptop, taking the whole shell. There are 11 of them in total, and is on the right edge of the laptop.

  Thank you!

  Thanks for the photo!

  The missing screw specifications:

  86.2ZR62.6R5 - SCREW M2.0 x L6.5x (L = length) - Qty 8 on the bottom.

  

  The screw located on the other side is exactly the same. You will be able to measure the diameter, the thickness of the head.

• Acrobat Pro DC - subscription is missing from the tools

  I have a subscription to creative cloud and full account of EchoSign tied up on the same Adobe account. I upgraded to Acrobat Pro DC, took all the tools at my disposal for three weeks, and then one afternoon I worked on Acrobat DC preferences I might have disabled something or maybe not, I realized shortly after this, some three tools became missing in Acrobat, these tools and features related to the Cloud of Document such as «Send & Track» services , 'Fill & sign', 'send the signature '.

  Other missing features on the "Home" tab are "Cloud of Document" and "Sent" that were there before. Now my account is the same and has not changed, then what am I wrong, how is my Acrobat now shows perpetual tools rather than those of subscription?

  Hello

  These services are only available for the languages of level 1 and level 2 and can be inadvertently disabled if the language preferences are changed.

  Back go to Preferences > language and change the language of the application.

  

• Satellite L550 - lack drivers for Bluetooth

  Attempts without end to get my cell phone Nokia 7230 working with the Bluetooth on my Toshiba Satellite L550, but nothing happens. When I try to download the drivers, it says plug it. Also, I get this message of Nokia PC Suite.

  I get the message that the three drivers are missing, 6to4 map ISATAP M/S M/S & M/S Teredo Tunneling adapter card.
  All attempts to repair through the Microsoft site failed, & the only suggestion is "computer to contact manufacturer.

  The computer is still under warranty, purchased in France where I still live.
  Just to add to my misery, Windows 7 is in French, which is not making things easier, because English is my mother tongue.

  Should I just give up & buy a USB cable & forget Bluetooth?

  Hello

  Are you sure that portable supports the internal Bluetooth adapter?
  Check if you have a BT label at the bottom of the unit
  Maybe the laptop does not support the BT module and so you are not able to connect the phone to this unit

  If the laptop supports an internal BT module, you must reinstall the BT stack which you can find here:
  http://APS2.toshiba-tro.de/Bluetooth/

  FYI: you can activate the BT using FN + F8

• Maintenance of printhead HP Photosmart 6510/replacement?

  I have a HP Photosmart Plus B209a-m CD035a of model that comes with having its printhead failure (CN643A).  Although I work for HP (Enterprise Services), it is too expensive to replace so I bought a Photsmart 6510 AIO.  The B209a-m, I liked how I could remove the print head Assembly and to clean up the grime of the ink of ramps, etc..  It seems that on my new 6510, the print head Assembly can be without mowing of the cart - but once that loose, there is no authorization to remove the print head for cleaning.

  This can be accomplished?  I have to remove a screw or am I missing something?  As this is a new printer, I was trying to assess if this is a negative in my choice, if it cannot be removed for the maintenance cleaning.

  The only thing I have to add is:

  I managed to remove the print head and used a few head cleaning Epson I've had, in order to eliminate the heads black and color. I guess that distilled water would also work. After cleaning the black works well again.

  Remove the cover as described previously by others.

  After you have removed the cover, remove the print head ASSEMBLY:

  1 carefully remove the film (large 5/16") close looking for band that crosses the print head Assembly by; releasing

  the tension on the left side by moving it to the print head, on the right end drag strip out of the corner

  crochet.   Note the marks and which is the top and left and right side for correct orientation at the meeting.

  2. Remove money (2) springs to the rear of the door-printhead

  3. slide and tilt forward support

  4. carefully remove the ribbons of the support cables (just pull on)

  5 have your way of the print head!

  6. then, I shed cleaner down the screens from the top, then slung to force the vacuum through the head on the

  background. I did several times.

  7 Sling on dry excess fluid, pat with a paper towel

  8 reinstall the cables in water, then put back in the printer, the springs and then re-install the thin layer as the Strip through

  guides on the support (do not forget to install in the same way, it has been deleted in the measure of the top and bottom and that end)

  on the right) and then the lid as described above.

  A note: I got a Kodak printer and went through the same thing with her whenever he had sat for several days without use. Cost me a fortune in ink running the cleaning. Looks like HP's more Kodak. My HP printers with ink cartridges that have the printhead on them are no problem. If they do not print right, just throw away them and with the new cartridge, you also have a new print head. It looks like if I continue to have this problem with this 65510 will travel the path of the Kodak, in the trash! Had the same problem with the Epsons so I guess all that's left are brother and Canon!

  Hope this helps some of you.

  FLASH: 25/03/14 arrested black print again! After extracting new hands in the dirty, I found the real problem that everyone is probably cause trouble. There are pipes on the printhead carrier going to the vacuum pump and him on the side of the printer in a tray in felt. Black hose of my print head was completeyl plugged with dried ink. I could rinse with distilled water and a syringe. This work is not for the faint of heart, but if you tear systematically in such things and that the printer is out of warranty you have to lose! I could guide you how to do it if you're interested, but a bit long for here. Write me if you want information ([under the direction of privacy]). I tell myself that these pipes do not allow to draw the head during the cleaning process, the ink of the pump so it dries just in the head. Good luck.

• ProBook 4530 s: driver for Probook s 4530 after updating windows 10

  Hi all

  I've updated my Probook s 4530 on Windows 10 days back & now three drivers are missing. I tried to auto update in windows update, but it could not find. I know that it is too early to ask for help on the driver for Windows 10 but eager to get a work around.

  Here are details:-

  Pilot 1: Device Base system:-PCI Slot 2 (bus 36 PCI, device 0, function 3)

  Information:-device PCI\VEN_197B & DEV_2393 & SUBSYS_167C103C & REV_30\4 & 2ce17296 & 0 & 03E2 also requires installation.

  Pilot 2: Device Base system:-PCI Slot 2 (bus 36 PCI, device 0, function 3)

  Information:-device PCI\VEN_197B & DEV_2392 & SUBSYS_167C103C & REV_30\4 & 2ce17296 & 0 & 00E2 also requires installation.

  Driver 3:-unknown device:-location on the Pci Bus

  Information:-ACPI\HPQ0004\3 & 33FD14CA & 0

  Thanks in advance.

  Concerning

  Dev

  Hi, Dev:

  Here is the workaround...

  For the first two, use this driver...

  http://h20565.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5060881 & swItemId = ob_116003_1 & swEnvOid = 4132 #tab1

  For the last one, use this driver...

  http://h20565.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5060881 & swItemId = ob_125640_1 & swEnvOid = 4059 #tab1

• HP 15-f019dx: Drivers needed

  I lowered from 8.1 to Windows 7 64 bit and I thought that I had everything in order, but it turns out that three drivers are missing entirely and I do not have any idea where to find them at this point or really what I'm looking for yet. Miss me the PCI device, SM Bus controller and USB controller. Any link or at least a little nudge in the right direction would be really appreciated.

  Hello:

  See if these drivers work...

  SMBus:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-138108-1&cc=us&DLC=en&LC=en&OS=4063&productOid=7174371&sw_lang=

  USB3:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-138111-1&cc=us&DLC=en&LC=en&OS=4063&productOid=7174371&sw_lang=

  PCI:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-141789-1&cc=us&DLC=en&LC=en&OS=4063&productOid=7174371&sw_lang=

• Cannot run the simulators that come with 4.7.0.39

  When I try to start the simulators the

  C:\Program search in Motion\BlackBerry JDE 4.7.0\simulator

  book directly with the .bat files or through the JDE, I get an error indicating that these three files are missing (in this order):

  net_rim_bb_medialoader_sonic_networks. COD

  net_rim_device_apps_internal_browser_smil. COD

  net_rim_bb_help_wizard_images_9500.cod

  When I copy files with the same names of the simulator which is downloadable separately (4.7.0.41), it tries to start, but then I get:

  JVM error 543 - incompatible files Java System installed

  Is there a way to get around this?

  Answered my own question...

  It works now that I deleted fs.dmp - 9500 and 9530 - fs.dmp.

• Acer Realtek Audio Manager

  Acer Aspire Windows Vista (laptop) came with Acer Realtek Audio Manager, which is a fun audio enhancer. I was transferred to a new laptop Acer Aspire with Windows 7 and Miss said Audio Manager, but have not found a way to apply, or something similar. Can you help me? I think that the HD may be in the title.

  Each computer model will probably have different internal components (e.g.: network port, modem, video card and audio controls) so you can't 'place' a 'pilot' from one to the other 'directly '.

  Manager Audio DD Realtek is part of the Realtek drivers are required / used for your Vista laptop.  The drivers are provided by the manufacturer of this laptop. Realtek is a sound card and Realtek provides drivers for this sound card, originally.  Computer manufacturers are taking the pilots 'original' and adapt them to their own needs.

  It seems that your new Windows 7 laptop is a different model from a different manufacturer and could use another sound that your laptop Vista. original card, you must use the drivers that provides the Windows 7 laptop manufacturer.

• FAILURE OF VPN TUNNEL

  Hello guys,.

  I have an ASA 5505 firewall tries to create a VPN tunnel from site to site with a router of 2621 running Advanced IP services. The tunnel keeps do not and I don't know why. Below is the config.

  !
  hostname SeCuReWaLL
  domain default.domain.invalid
  activate 2KFQnbNIdI.2KYOU encrypted password
  2KFQnbNIdI.2KYOU encrypted passwd
  names of
  name 192.168.2.0 outside
  name 192.168.3.0 inside
  !
  interface Vlan1
  Description of network links extended to outside of the
  nameif outside
  security-level 0
  192.168.2.101 IP address 255.255.255.0
  !
  interface Vlan2
  Description within a private network
  nameif inside
  security-level 100
  address 192.168.3.1 IP 255.255.255.0
  !
  interface Ethernet0/0
  !
  interface Ethernet0/1
  switchport access vlan 2
  !
  interface Ethernet0/2
  Shutdown
  !
  interface Ethernet0/3
  Shutdown
  !
  interface Ethernet0/4
  Shutdown
  !
  interface Ethernet0/5
  Shutdown
  !
  interface Ethernet0/6
  Shutdown
  !
  interface Ethernet0/7
  Shutdown
  !
  boot system Disk0: / asa822 - k8.bin
  passive FTP mode
  DNS server-group DefaultDNS
  domain default.domain.invalid
  allow inside_access_in to access extended list ip inside outside 255.255.255.0 255.255.255.0
  outside_access_in list extended access permit icmp any any echo response
  site_router to access extended list ip inside 255.255.255.0 allow 192.168.5.0 255.255.255.0
  pager lines 24
  Outside 1500 MTU
  Within 1500 MTU
  ICMP unreachable rate-limit 1 burst-size 1
  ASDM image disk0: / asdm - 625.bin
  don't allow no asdm history
  ARP timeout 14400
  Global 1 interface (outside)
  NAT (inside) 0-list of access site_router
  NAT (inside) 1 inside 255.255.255.0
  Access-group outside_access_in in interface outside
  Route outside 0.0.0.0 0.0.0.0 192.168.2.1 1
  Outdoor 192.168.5.0 255.255.255.0 192.168.2.107 1
  Timeout xlate 03:00
  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
  Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
  timeout tcp-proxy-reassembly 0:01:00
  dynamic-access-policy-registration DfltAccessPolicy
  Enable http server
  HTTP inside 255.255.255.0 inside
  No snmp server location
  No snmp Server contact
  Server enable SNMP traps snmp authentication linkup, linkdown cold start
  Crypto ipsec transform-set esp-3des esp-sha-hmac secure_set
  life crypto ipsec security association seconds 28800
  Crypto ipsec kilobytes of life - safety 4608000 association
  peer set card crypto ipsec_map 10 192.168.2.107
  card crypto ipsec_map 10 transform-set secure_set
  ipsec_map interface card crypto outside
  crypto ISAKMP allow outside
  crypto ISAKMP policy 10
  preshared authentication
  3des encryption
  md5 hash
  Group 5
  lifetime 28800
  Telnet timeout 5
  SSH timeout 5
  Console timeout 0
  dhcpd dns 192.168.2.1
  !
  dhcpd address 192.168.3.10 - 192.168.3.40 inside
  dhcpd allow inside
  !

  a basic threat threat detection
  Statistics-list of access threat detection
  no statistical threat detection tcp-interception
  WebVPN
  username admin privilege 15 encrypted password f3UhLvUj1QsXsuK7
  tunnel-group 192.168.2.107 type ipsec-l2l
  IPSec-attributes tunnel-group 192.168.2.107
  pre-shared key *.
  !
  class-map inspection_default
  match default-inspection-traffic
  !
  !
  type of policy-card inspect dns preset_dns_map
  parameters
  maximum message length automatic of customer
  message-length maximum 512
  Policy-map global_policy
  class inspection_default
  inspect the preset_dns_map dns
  inspect the ftp
  inspect h323 h225
  inspect the h323 ras
  inspect the netbios
  inspect the rsh
  inspect the rtsp
  inspect the skinny
  inspect esmtp
  inspect sqlnet
  inspect sunrpc
  inspect the tftp
  inspect the sip
  inspect xdmcp
  Review the ip options
  !
  global service-policy global_policy
  context of prompt hostname
  call-home
  Profile of CiscoTAC-1
  no active account
  http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address
  email address of destination [email protected] / * /
  destination-mode http transport
  Subscribe to alert-group diagnosis
  Subscribe to alert-group environment
  Subscribe to alert-group monthly periodic inventory
  monthly periodicals to subscribe to alert-group configuration
  daily periodic subscribe to alert-group telemetry
  Cryptochecksum:a6ffc4e9572dbee8e526c3013a96a510
  : end

  !
  InternetRouter hostname
  !
  boot-start-marker
  boot-end-marker
  !
  !
  No aaa new-model
  no location network-clock-participate 1
  No network-clock-participate wic 0
  IP cef
  !
  !
  !
  !
  no ip domain search
  !
  !
  !
  !
  !
  !
  !
  !
  !
  !
  !
  !
  !
  !
  !
  !
  !
  !
  crypto ISAKMP policy 10
  BA 3des
  md5 hash
  preshared authentication
  Group 5
  lifetime 28800
  key cisco address 192.168.2.101 crypto ISAKMP xauth No.
  !
  !
  Crypto ipsec transform-set esp-3des secure_set
  !
  ipsec_map 10 ipsec-isakmp crypto map
  defined peer 192.168.2.101
  Set transform-set secure_set
  match the address router_site
  !
  !
  !
  !
  interface Loopback0
  192.168.5.1 IP address 255.255.255.0
  !
  interface FastEthernet0/0
  IP 192.168.2.107 255.255.255.0
  automatic duplex
  automatic speed
  ipsec_map card crypto
  !
  interface Serial0/0
  no ip address
  Shutdown
  !
  interface FastEthernet0/1
  no ip address
  Shutdown
  automatic duplex
  automatic speed
  !
  interface Serial0/1
  no ip address
  Shutdown
  !
  IP route 192.168.3.0 255.255.255.0 192.168.2.101
  !
  !
  IP http server
  no ip http secure server
  !
  router_site extended IP access list
  ip licensing 192.168.5.0 0.0.0.255 192.168.3.0 0.0.0.255
  !
  !
  !
  !
  control plan
  !
  !
  !
  Voice-port 1/0/0
  !
  Voice-port 1/0/1
  !
  Voice-port 1/1/0
  !
  Voice-port 1/1/1
  !
  !
  !
  !
  !
  !
  !
  !
  Line con 0
  exec-timeout 0 0
  Synchronous recording
  line to 0
  line vty 0 4
  opening of session
  !
  !
  end

  InternetRouter #debug isakmp crypto
  Crypto ISAKMP debug is on
  InternetRouter #ping
  Protocol [ip]:
  Target IP address: 192.168.3.10
  Number of repetitions [5]:
  Size of datagram [100]:
  Timeout in seconds [2]:
  Extended commands [n]: y
  Address source or interface: 192.168.5.1
  Type of service [0]:
  Set the DF bit in the IP header? [None]:
  Validate the response data? [None]:
  Data model [0xABCD]:
  In bulk, Strict, Record, Timestamp, Verbose [no]:
  Scan the range of sizes [n]:
  Type to abort escape sequence.
  Send 5, echoes ICMP 100 bytes to 192.168.3.10, time-out is 2 seconds:
  Packet sent with the address source 192.168.5.1

  * 01:49:47.699 Mar 1: ISAKMP: ke received message (1/1)
  * 01:49:47.699 Mar 1: ISAKMP: (0:0:N / A:0): THE application profile is (NULL)
  * 01:49:47.699 Mar 1: ISAKMP: created a struct peer 192.168.2.101, peer port 500
  * 01:49:47.699 Mar 1: ISAKMP: new created position = 0x8553C778 peer_handle = 0 x 80000013
  * 01:49:47.699 Mar 1: ISAKMP: lock struct 0x8553C778, refcount IKE peer 1 for isakmp_initiator
  * 01:49:47.699 Mar 1: ISAKMP: 500 local port, remote port 500
  * 01:49:47.699 Mar 1: ISAKMP: set new node 0 to QM_IDLE
  * 01:49:47.703 Mar 1: insert his with his 84074CC8 = success
  * 01:49:47.703 Mar 1: ISAKMP: (0:0:N / A:0): cannot start aggressive mode, try the main mode.
  * 01:49:47.703 Mar 1: ISAKMP: (0:0:N / A:0): found peer pre-shared key matching 192.168.2.101
  * 01:49:47.703 Mar 1: ISAKMP: (0:0:N / A:0): built the seller-07 ID NAT - t
  * 01:49:47.703 Mar 1: ISAKMP: (0:0:N / A:0): built of NAT - T of the seller-03 ID
  * 01:49:47.703 Mar 1: ISAKMP: (0:0:N / A:0): built the seller-02 ID NAT - t
  * 01:49:47.703 Mar 1: ISAKMP: (0:0:N / A:0): entry = IKE_MESG_FROM_IPSEC, IKE_SA_REQ_MM
  * 01:49:47.707 Mar 1: ISAKMP: (0:0:N / A:0): former State = new State IKE_READY = IKE_I_MM1

  * 01:49:47.707 Mar 1: ISAKMP: (0:0:N / A:0): early changes of Main Mode
  * 01:49:47.707 Mar 1: ISAKMP: (0:0:N / A:0): send package to 192.168.2.101 my_port 500 peer_port 500 (I) MM_NO_STATE
  * 01:49:47.711 Mar 1: ISAKMP (0:0): packet received 192.168.2.101 dport 500 sport Global 500 (I) MM_NO_STATE
  * 01:49:47.711 Mar 1: ISAKMP: (0:0:N / A:0): entry = IKE_MESG_FROM_PEER, IKE_MM_EXCH
  * 01:49:47.711 Mar 1: ISAKMP: (0:0:N / A:0): former State = new State IKE_I_MM1 = IKE_I_MM2

  * 01:49:47.715 Mar 1: ISAKMP: (0:0:N / A:0): treatment ITS payload. Message ID = 0
  * 01:49:47.715 Mar 1: ISAKMP: (0:0:N / A:0): load useful vendor id of treatment
  * 01:49:47.715 Mar 1: ISAKMP: (0:0:N / A:0): supplier code seems the unit/DPD but major incompatibilite.123
  * 01:49:47.715 Mar 1: ISAKMP: (0:0:N / A:0): provider ID is NAT - T v2
  * 01:49:47.719 Mar 1: ISAKMP: (0:0:N / A:0): load useful vendor id of treatment
  * 01:49:47.719 Mar 1: ISAKMP: (0:0:N / A:0): supplier code seems the unit/DPD but major incompatibility of 194
  * 01:49:47.719 Mar 1: ISAKMP: (0:0:N / A:0): found peer pre-shared key matching 192.168.2.101
  * 01:49:47.719 Mar 1: ISAKMP: (0:0:N / A:0): pre-shared key local found
  * 01:49:47.719 Mar 1: ISAKMP: analysis of the profiles for xauth...
  * 01:49:47.719 Mar 1: ISAKMP: (0:0:N / A:0): audit ISAKMP transform 1 against the policy of priority 10
  * 01:49:47.719 Mar 1: ISAKMP: 3DES-CBC encryption
  * 01:49:47.719 Mar 1: ISAKMP: MD5 hash
  * 01:49:47.719 Mar 1: ISAKMP: group by default 5
  * 01:49:47.719 Mar 1: ISAKMP: pre-shared key auth
  * 01:49:47.723 Mar 1: ISAKMP: type of life in seconds
  * 01:49:47.723 Mar 1: ISAKMP: life (basic) of 28800
  * 01:49:47.723 Mar 1: ISAKMP: (0:0:N / A:0): atts are acceptable. Next payload is 0
  * 1 Mar 01:49:48.119: ISAKMP:(0:1:SW:1): load useful vendor id of treatment
  * 1 Mar 01:49:48.119: ISAKMP:(0:1:SW:1): vendor ID seems the unit/DPD but major incompatibility of 123
  * 1 Mar 01:49:48.123: ISAKMP:(0:1:SW:1): vendor ID is NAT - T v2
  * 1 Mar 01:49:48.123: ISAKMP:(0:1:SW:1): load useful vendor id of treatment
  * 1 Mar 01:49:48.123: ISAKMP:(0:1:SW:1): vendor ID seems the unit/DPD but major incompatibility of 194
  * 01:49:48.123 Mar 1: ISAKMP: (0:1:SW:1): entry = IKE_MESG_INTERNAL, IKE_PROCESS_MAIN_MODE
  * 01:49:48.123 Mar 1: ISAKMP: (0:1:SW:1): former State = new State IKE_I_MM2 = IKE_I_MM2

  * 1 Mar 01:49:48.127: ISAKMP:(0:1:SW:1): sending package to 192.168.2.101 my_port 500 peer_port 500 (I) MM_SA_SETUP
  * 01:49:48.127 Mar 1: ISAKMP: (0:1:SW:1): entry = IKE_MESG_INTERNAL, IKE_PROCESS_COMPLETE
  * 01:49:.48.131 Mar 1: ISAKMP: (0:1:SW:1): former State = new State IKE_I_MM2 = IKE_I_MM3

  * 01:49:48.383 Mar 1: ISAKMP (0:134217729): packet received 192.168.2.101 dport 500 sport Global 500 (I) MM_SA_SETUP
  * 01:49:48.383 Mar 1: ISAKMP: (0:1:SW:1): entry = IKE_MESG_FROM_PEER, IKE_MM_EXCH
  * 01:49:48.383 Mar 1: ISAKMP: (0:1:SW:1): former State = new State IKE_I_MM3 = IKE_I_MM4

  * 1 Mar 01:49:48.387: ISAKMP:(0:1:SW:1): processing KE payload. Message ID = 0
  * 1 Mar 01:49:48.887: ISAKMP:(0:1:SW:1): processing NONCE payload. Message ID = 0
  * 01:49:48.887 Mar 1: ISAKMP: (0:1:SW:1): found peer pre-shared key matching 192.168.2.101
  * 01:49:48.891 Mar 1: ISAKMP: (0:1:SW:1): SKEYID generated State
  * 1 Mar 01:49:48.891: ISAKMP:(0:1:SW:1): load useful vendor id of treatment
  * 1 Mar 01:49:48.891: ISAKMP:(0:1:SW:1): vendor ID is the unit
  * 1 Mar 01:49:48.891: ISAKMP:(0:1:SW:1): load useful vendor id of treatment
  * 1 Mar 01:49:48.891: ISAKMP:(0:1:SW:1): vendor ID seems the unit/DPD but major incompatibility of 145
  * 1 Mar 01:49:48.891: ISAKMP:(0:1:SW:1): vendor ID is XAUTH
  * 1 Mar 01:49:48.895: ISAKMP:(0:1:SW:1): load useful vendor id of treatment
  * 1 Mar 01:49:48.895: ISAKMP:(0:1:SW:1): speaking to another box of IOS!
  * 1 Mar 01:49:48.895: ISAKMP:(0:1:SW:1): load useful vendor id of treatment
  * 01:49:48.895 Mar 1: ISAKMP: (0:1:SW:1): supplier code seems the unit/DPD but hash mismatch
  * 01:49:48.895 Mar 1: ISAKMP: receives the payload type 20
  * 01:49:48.895 Mar 1: ISAKMP: receives the payload type 20
  * 01:49:48.895 Mar 1: ISAKMP: (0:1:SW:1): entry = IKE_MESG_INTERNAL, IKE_PROCESS_MAIN_MODE
  * 01:49:48.899 Mar 1: ISAKMP: (0:1:SW:1): former State = new State IKE_I_MM4 = IKE_I_MM4

  * 01:49:48.899 Mar 1: ISAKMP: (0:1:SW:1): send initial contact
  * 01:49:48.899 Mar 1: ISAKMP: (0:1:SW:1): ITS been pr.e using id ID_IPV4_ADDR type shared-key authentication
  * 01:49:48.899 Mar 1: ISAKMP (0:134217729): payload ID
  next payload: 8
  type: 1
  address: 192.168.2.107
  Protocol: 17
  Port: 500
  Length: 12
  * 01:49:48.903 Mar 1: ISAKMP: (0:1:SW:1): the total payload length: 12
  * 1 Mar 01:49:48.903: ISAKMP:(0:1:SW:1): sending package to 192.168.2.101 my_port 500 peer_port 500 (I) MM_KEY_EXCH
  * 01:49:48.907 Mar 1: ISAKMP: (0:1:SW:1): entry = IKE_MESG_INTERNAL, IKE_PROCESS_COMPLETE
  * 01:49:48.907 Mar 1: ISAKMP: (0:1:SW:1): former State = new State IKE_I_MM4 = IKE_I_MM5

  * 01:49:48.907 Mar 1: ISAKMP (0:134217729): packet received 192.168.2.101 dport 500 sport Global 500 (I) MM_KEY_EXCH
  * 1 Mar 01:49:48.911: ISAKMP:(0:1:SW:1): payload ID for treatment. Message ID = 0
  * 01:49:48.911 Mar 1: ISAKMP (0:134217729): payload ID
  next payload: 8
  type: 1
  address: 192.168.2.101
  Protocol: 17
  Port: 0
  Length: 12
  * 1 Mar 01:49:48.911: ISAKMP:(0:1:SW:1): peer games * no * profiles
  * 1 Mar 01:49:48.911: ISAKMP:(0:1:SW:1): HASH payload processing. Message ID = 0
  * 01:49:48.915 Mar 1: ISAKMP: received payload type 17
  * 1 Mar 01:49:48.915: ISAKMP:(0:1:SW:1): load useful vendor id of treatment
  * 1 Mar 01:49:48.915: ISAKMP:(0:1:SW:1): vendor ID is DPD
  * 01:49:48.915 Mar 1: ISAKMP: (0:1:SW:1): SA authentication status:
  authenticated
  * 01:49:48.915 Mar 1: ISAKMP: (0:1:SW:1): SA has been authenticated with 192.168.2.101
  * 01:49:48.915 Mar 1: ISAKMP: attempts to insert a 192.168.2.107/192.168.2.101/500/ peer and inserted 8553 778 successfully.
  * 01:49:48.919 Mar 1: ISAKMP: (0:1:SW:1): entry = IKE_MESG_FROM_PEER, IKE_MM_EXCH
  * 01:49:48.919 Mar 1: ISAKMP: (0:1:SW:1.): O State of LD = new State IKE_I_MM5 = IKE_I_MM6

  * 01:49:48.919 Mar 1: ISAKMP: (0:1:SW:1): entry = IKE_MESG_INTERNAL, IKE_PROCESS_MAIN_MODE
  * 01:49:48.919 Mar 1: ISAKMP: (0:1:SW:1): former State = new State IKE_I_MM6 = IKE_I_MM6

  * 01:49:48.923 Mar 1: ISAKMP: (0:1:SW:1): entry = IKE_MESG_INTERNAL, IKE_PROCESS_COMPLETE
  * 01:49:48.923 Mar 1: ISAKMP: (0:1:SW:1): former State = new State IKE_I_MM6 = IKE_P1_COMPLETE

  * 01:49:48.927 Mar 1: ISAKMP: (0:1:SW:1): start Quick Mode Exchange, M - ID of 590019425
  * 1 Mar 01:49:48.931: ISAKMP:(0:1:SW:1): sending package to 192.168.2.101 my_port 500 peer_port 500 (I) QM_IDLE
  * 01:49:48.931 Mar 1: ISAKMP: (0:1:SW:1): entrance, node-590019425 = IKE_MESG_INTERNAL, IKE_INIT_QM
  * 01:49:48.931 Mar 1: ISAKMP: (0:1:SW:1): former State = new State IKE_QM_READY = IKE_QM_I_QM1
  * 01:49:48.931 Mar 1: ISAKMP: (0:1:SW:1): entry = IKE_MESG_INTERNAL, IKE_PHASE1_COMPLETE
  * 01:49:48.935 Mar 1: ISAKMP: (0:1:SW:1): former State = new State IKE_P1_COMPLETE = IKE_P1_COMPLETE

  * 01:49:48.939 Mar 1: ISAKMP (0:134217729): packet received 192.168.2.101 dport 500 sport Global 500 (I) QM_IDLE
  * 01:49:48.939 Mar 1: ISAKMP: node set 330122531 to QM_IDLE
  * 1 Mar 01:49:48.943: ISAKMP:(0:1:SW:1): HASH payload processing. Message ID = 330122531
  * 1 Mar 01:49:48.943: ISAKMP:(0:1:SW:1): treatment protocol NOTIFIER INVALID_ID_INFO 1
  0, message ID SPI = 330122531, a = 84074CC8
  * 01:49:48.943 Mar 1: ISAKMP: (0:1:SW:1): the peer is not paranoid KeepAlive.

  * 01:49:48.943 Mar 1: ISAKMP: (0:1:SW:1): remove the reason for HIS "fatal Recevied of information' State (I) QM_IDLE (ext. 192.168.2.101)
  * 01:49:48.943 Mar 1: ISAKMP: (0:1:SW:1): remove error node 330122531 FALSE reason 'informational (en) st.
  Success rate is 0% (0/5)
  InternetRouter #ate 1 "
  * 01:49:48.943 Mar 1: ISAKMP: (0:1:SW:1): entry = IKE_MESG_FROM_PEER, IKE_INFO_NOTIFY
  * 01:49:48.947 Mar 1: ISAKMP: (0:1:SW:1): former State = new State IKE_P1_COMPLETE = IKE_P1_COMPLETE

  * 01:49:48.947 Mar 1: ISAKMP (0:134217729): packet received 192.168.2.101 dport 500 sport Global 500 (I) QM_IDLE
  * 01:49:48.951 Mar 1: ISAKMP: node set-412204705 to QM_IDLE
  * 1 Mar 01:49:48.951: ISAKMP:(0:1:SW:1): sending package to 192.168.2.101 my_port 500 peer_port 500 (I) QM_IDLE
  * 01:49:48.951 Mar 1: ISAKMP: (0:1:SW:1): purge the node-412204705
  * 01:49:48.955 Mar 1: ISAKMP: (0:1:SW:1): entry = IKE_MESG_INTERNAL, IKE_PHASE1_DEL
  * 01:49:48.955 Mar 1: ISAKMP: (0:1:SW:1): former State = new State IKE_P1_COMPLETE = IKE_DEST_SA

  * 01:49:48.955 Mar 1: ISAKMP: (0:1:SW:1): removal of HIS State "No reason" why (I) QM_IDLE (ext. 192.168.2.101)
  * 01:49:48.955 Mar 1: ISAKMP: Unlocking IKE struct 0x8553C778 for isadb_mark_sa_deleted(), count 0
  * 01:49:48.959 Mar 1: ISAKMP: delete peer node by peer_reap for 192.168.2.101: 8553 778
  * 01:49:48.959 Mar 1: ISAKMP: (0:1:SW:1): error in node-590019425 FALSE reason for deletion "deleted IKE."
  * 01:49:48.959 Mar 1: ISAKMP: (0:1:SW:1): node error 330122531 FALSE reason for deletion "removed IKE."
  * 01:49:48.959 Mar 1: ISAKMP: (0:1:SW:1): entry = IKE_MESG_FROM_PEER, IKE_MM_EXCH
  * 01:49:48.959 Mar 1: ISAKMP: (0:1:SW:1): former State = new State IKE_DEST_SA = IKE_DEST_SA

  Hello

  I gave a quick scan here for the configuration on both devices, found two or three commands are missing from the configuration of the ASA

  ASA
  ---

  card crypto ipsec_map 10 correspondence address site_router

  outside_access_in list extended access udp allowed any any eq 500
  outside_access_in list extended access udp allowed any any eq 4500
  outside_access_in list extended access allow esp a whole

  I'm assuming pre shared key defined on ASA cisco is the same on router

  On router
  ---------

  Try running the following commands: -.

  No crypto ipsec transform-set esp-3des secure_set
  Crypto ipsec transform-set esp-3des esp-sha-hmac secure_set

  At the time of the opening of the tunnel, please gather at the debug crypto isa 127 output and debug crypto ipsec 127 of ASA

  You can also check the configuration below document link

  http://www.Cisco.com/en/us/products/ps6120/products_configuration_example09186a00805e8c80.shtml

  Ignore the map route on router configuration contained in the above document *.

  HTH...

  Kind regards
  Mohit