Aspire Swtich 10 anniversary SW5 - 015 update freeze

Similar Questions

• No connection available on my sw5-015

  So my nephews SW5 - 015 does not connect to my wireless network.  I checked the wireless driver and this is the last and largest.  Under network connections, Wi - Fi is in place and running, but in the taskbar, the icon wireless has a red cross on it and when I move the mouse over it it happens not connected - no connection is available.  My other wireless devices are able to connect to my network without any problems.

  I tried to reset the computer several times, but it keeps the same way.

  Wi - fi is definitely on and airplane mode is definitely off.

  Any suggestions?

  Try to move the computer just above the router. If she sees the wireless network when you're within a few feet away, it is likely that the antenna cables are loose.

• Windows Update freezes when installing updates

  Whenever I turned off my computer, windows update freeze install update 2 of 5. I let it run for hours, and still it does not move beyond update 2 of 5. I've been struggling with this probably 2 months now. Because it's cold, I have to hold the power button to force it to stop. Can anyone help. I'm not super irritable and be overwhelmed by this problem.

  Hello

  Try the following.

  Shut down the laptop.  Tap away at f8 that you start the laptop to enter the Windows Recovery Console.  Use the arrow keys to select Safe mode and press ENTER.  When it is loaded in the Menu start, open all programs, open accessories, right-click on command prompt and select "run as Administrator".

  In at the prompt, type the following command and press ENTER.

  sfc/scannow                (Note that there is a space between sfc and /)

  Let the entire process, then the output type and press ENTER.  Restart the laptop.

  Let windows load completely and then try to run the Windows Update 'Fixit' at the following link.

  http://support.Microsoft.com/mats/windows_update/

  Kind regards

  DP - K

• Is there a fault with upgrade 2.13.121 for the interface Adobe Creative Cloud? I want to check the updates of the program and update freezes at 5% - I have now tried 6 to 8 times to + 5 min once - it's over half an hour of my life!

  Is there a fault with upgrade 2.13.121 for the interface Adobe Creative Cloud? I want to check the updates of the program and update freezes at 5% - I have now tried 6 to 8 times to + 5 min once - it's over half an hour of my life!

  Hi David,

  Please check the help below document:

  https://helpx.Adobe.com/creative-cloud/KB/Error_Code_2_failed_update.html

  Kind regards

  Sheena

• My 'creative cloud' application freezes and does not download update - 'Installation update' freezes '0% '

  My 'creative cloud' application freezes and does not download update - 'Installation update' freezes '0% '

  In fact, I went to:

  www.Adobe.com/appsmanager/index.html

  and uploaded CC Desktop App from there.  Worked fine, thanks.

  Dennis

• Why my flash update freezes? (Screenshot)

  I am trying to install the latest update of flash player, but it freezes just when I run the installation program.

  Don't know if this is the download of the update by the saying, but I let run for over an hour and happened, just a spinning reel.

  I'm on a Mac OSX 10.9.3 Mavericks and try to install the latest update of flash player. I added a screenshot below...

  Also where should I have posted this?

  

  My thread in the apple support forum: why my flash update freezes?...: Apple Support communities

  My suggestion is to use the installer DMG http://download.macromedia.com/pub/flashplayer/current/support/install_flash_player_osx.dm g

• Aspire M3400 won't boot to Windows 7 after Windows Update freeze

  A couple of days, I restarted my PC and he tried to do a Windows Update Auto - saying "ready to set up Windows - do not turn off your computer. He froze then. When I turned off & on again once I'm said BSOD - STOP 0x0000007B messages. Whenever I have start Windows now whether attempts to run checkdisk - which finds several unreadable file record segments, then freezes before it can complete or it executes the Startup Repair which takes 1-2 hours to run, but solves nothing. None of the System Recovery options will work - I just get error messages - it can't seem to find the operating system. The eRecovery console has two options grayed out so I can't use it. I have no Windows 7 disks. I read that it might be the RAID controller causing problems? I tried to use a hard drive from my old PC - with Windows XP on it. As I repeated BSOD - the same error 07 b - until I changed the SATA to IDE mode. He then started in XP ok. However, leaving on IDE with my CD original HD (with Windows 7) means that he did nothing at all when I try & start. Any ideas?

  If the update froze in the middle of treatment, the operating system is more than likely corrupt.  We offer you to try a recovery outside of Windows. If this does not work, you will want to look into obtaining a recovery media for your device. If you are in the United States, you can visit the Store of Acer.  If you are outside the United States we suggest to contact technical support in your region for further assistance in this matter.
  Acer Service & support

  It is also possible that the hard disk itself has not.

• Aspire SW5 - 015 don't wake mode 'sleep'

  About 1 in 4 times that I try to wake the Tablet, he won't answer. I see the mouse, but the rest of the screen is black. If I press the power button on the side, I get the half screen that says «Drag down to stop...» "but it is not really closed. I can say that it's still plugged in because the screen is a slightly lighter gray until it is completely closed down. The only solution is to hold the volume button and the power button to reset. Ideas? My guess is a video driver issue, but he says that all drivers are up-to-date. This has been a problem since day 1. I had about 3 weeks.

  Have you checked the BIOS updates?

  V1.18

  http://global-download.Acer.com/GDFiles/BIOS/BIOS/BIOS_Acer_1.18_A_A.zip?acerid=635811629128805837&S...

• Not compatible with the anniversary 10 Windows Update software Dynadock

  Anniversary Edition 10 Windows tells me that the Dynadock software is not compatible, and windows was freezing since I've updated.
  Y at - it a fix for this?

  + 1

  In addition, the screen has stopped working. We tried reinstalling the drivers several times and still no luck. Changed the screen as well as the type of connection (VGA/DVI). Is there a solution to this?

  Best regards

  Vicom

• anniversary 10 Windows update breaks the bootcamp drivers

  I bought the home edition of windows 10 must be installed with bootcamp on my Mac Pro (latest version).

  After a few seconds the bootcamp drivers installation, I get a blue screen saying "kernel Security Check Failure. I tried to re-parititon and re - install windows with bootcamp 10 several times and the results are the same. I found an earlier version of windows 10 online and when I tried to install it, the problem goes away. but then when I update this old windows 10 with the update of the anniversary, the problem appears again. so I guess that the problem is related to that! in safe mode I get no blue screens. today I intend to try to uninstall the driver of each training camp in a tower, until I tell me what is the cause of blue screen. so far, I removed the graphics drivers, but the results are the same.

  If anyone can provide all the information on how to study this issue further away, or maybe even solve it, I'll appreciate it more! Thank you

  My Sepcs are:

  Graphics card: Dual AMD over-pants D300

  Processor: Intel Xeon E5 1620 v2

  Memory: 12GB DDR3

  I suggest you that stay with the working version. Please see Re: Windows 10 anniversary + Boot Camp = Assembly is more Mac partition for more details.

• Update freezes

  Guys and girls,

  For the 3 latest updates of MacOs 10.11 my computer freezes during restart. After installation, it evolves into a dialog box which asks a selection and will not take any input. The only way out is to do a hard restart using the switch at the back of my iMac. The update seems ok and works fine after I restart the computer, but I'm about to download and install 10.11.6 and does not want to go through the problem again.

  Any thoughts?

  Phil

  Hello

  Start Safe Mode removes the system caches that can help.

  Follow these steps to start in safe mode.

  1. Start or restart your Mac.
  2. As soon as you hear the startup tone, hold down the SHIFT key.
  3. Release the SHIFT key when you see the logo Apple appears on the screen.

  After the Apple logo appears, this may take longer than usual to reach the login screen or your office. This is because your Mac performs a check of directory of your drive to boot in safe mode.

  To leave safe mode, restart your computer without pressing any keys during startup.

  If this does not help, the startup disk needs repair.

  Start your Mac while pressing the command + R keys. From there, you should have access to construction in utilities to check and repair the drive if needed using OS X Recovery.

• iOS9.3 update: freeze the device

  This is the last update of Ios9.3 which has a lot of issues such as the freezing of the unit while clicking on the link in the email. What is the solution to this problem?

  Basics of the manual are restarting, reset, restore

  Follow the 3R - if this does not solve your problem proceed

  Troubleshooting of user is:

  1. reboot, IE power off / on,.

  2 reset http://support.apple.com/kb/HT1430,

  3. restore the backup, restore as a new device. http://support.Apple.com/kb/HT1414

• After that Firefox v17 update freezes

  After that an update to version 17.0.1, whenever a web page is selected it 'freezes' on this page, only way out of Firefox is to go at the stop programme and management task.

  For the record, your 'more system details' shows Windows NT 6.2; WOW64 is Windows 8 (64-bit). Windows 8 is listed as compatible with Firefox 17.0.1 according to http://www.mozilla.org/firefox/17.0.1/system-requirements/

  You can consult this article for a solution:

  • Firefox crashes or does not - how to fix

  Alternatively, you can go through these basic troubleshooting steps:
  Troubleshoot and diagnose problems in Firefox

• Windows Update freezes

  Hey guys,.
  So I recently had a problem with XP Pro SP3 computer that works perfectly well in the normal tasks such as word processing, navigation, media, etc. I went to troubleshoot a Windows Update that I recently tried to install failed and Internet Explorer stops responding and freezes. So, here's exactly step by step what I do which creates this problem:

  (1) open upgrade from Windows (Internet Explorer then opens upwards)
  (2) Windows update site launches, but then a pop up asking to install something Microsoft is
  (3) I click on install
  (4) Internet Explorer freezes

  Every time I open just Windows Update and let is sit here, it freezes within 30 seconds. Whenever I click on do not install, it freezes. The only way to get it is to stop the process. Norton Internet Security is installed, but I created a rule to allow the updates of Windows Installer and I recently installed updates (11/15/09) last Sunday and they have installed successfully, except one which was what I tried to solve the problems.

  I already tried to re-registration of the Windows Update files, but also re-download of Windows Update and it still freezes. I am also able to navigate Internet Explorer perfectly on other sites with the exception of the Windows Update site. I ran scans and no viruses or malware were detected. The system is very healthy. Something to note is that the computer is on a domain. Please, if anyone out there has any ideas on what could be causing these constant freezes, let me know. Thank you.

  After a reset of Internet Explorer, the Windows Update site would still freeze. So what I had to do was to go to manage add-ons in Internet Explorer or disabled toolbar Norton Confidential installed Norton Internet Security was installed on the computer. After you disable the toolbar, Windows Update site showed correctly with all of the updates I needed and properly installed. It's amazing how Norton Internet Security control is same with simple and legitimate services that are necessary for your system. This is the exact reason that I do not run full software suite like NIS. Thank you for your help. Problem solved.

• Update freezes at 0%

  Hello. My computer has not worked for a while now.
  My automatic updates have not been updated correctly, it remains
  0% when I switch to the icon at the bottom bar. Also, when I try
  restart my computer or l ' turn off it freezes in the
  screen "Configuration of updates - please do not power off computer.
  I left it on this screen once for 2 days and nothing happened. I have
  also noticed that most of my programs / games no longer work with the
  exception of programs such as pokerstars. I'm obviously not very well with
  computers, but any help would be great.

  I use Windows Vista: 32 operating system family Premium b.

  This gives a shot:

  1. download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. After completing some you have a copy of your handy product key, uninstall all Norton software (including LiveUpdate and everything Norton Add ons) via Control Panel | Programs | Uninstall a program (or Control Panel |) Programs and features, if you are using the classic view).

  4 IMPORTANT! -Online activate Windows Firewall immediately after the restart.

  NB: Now you're "working without a net": no to ANYTHING else online (e.g., navigation, reading e-mail, chat) until you have completed step #7 below!

  5. right click on the file that you saved in step #1 above, and then select run as administrator.  DO TAP not your keyboard until the race ends, then restart.

  6. do a clean install of the 2010 version of your Norton application, using your product ID & reboot: http://www.symantec.com/norton/support/kb/web_view.jsp?wv_type=public_web&docurl=20080514162318EN

  TIP: Do not activate or install additional modules of Norton (for example, Norton Anti-Phishing) immediately.

  7. manually and repeatedly run (Norton) LiveUpdate until you get a prompt "no update more".

  8. for good measure, reset the IE advanced by http://support.microsoft.com/kb/923737

  8 b. now reset Windows Update also:

  How to reset the Windows Update components?
  [Run the difficulty in the default and aggressive modes]
     http://support.Microsoft.com/kb/971058

  NB: Access KB971058 via Internet Explorer (32-bit), not any other browser.

  9 test.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft