Aspire v5-571 ahteros wireless network card does not support the miracast.

Similar Questions

• What does that mean? -This problem occurred because your graphics card does not support the required version of DirectX. This version of Windows requires a DirectX 9.0 compatible video card or newer.

  I tried viewing a presentation power point and got to page 2 and my computer crashed.  Thought on... what he did previously trying to display a PPP file, but I thought that it was not my computer to the actual file.  now I have my doubts and also this time an error message came that said... This problem occurred because your graphics card does not support the required version of DirectX. This version of Windows requires a DirectX 9.0 compatible video card or newer.  can someone tell me what I should do next?

  You left out which version of DirectX has been shown.

  As far as I know, your Intel 945GM should support DirectX 9 and because you have XP sp3, you must have at least DirectX 9 installed.

  I met the following, but it shouldn't apply to Powerpoint:

  Some such as the Intel 945 GM Intel video cards have a design limitation which may cause problems when you try to run the Source Engine games. 3D graphics kernel does not support transformation of material, light and the vertex shader to similar technologies, which is an important part of the pipeline of 3D acceleration. Instead, this functionality is emulated in software that can reduce the compatibility and performance with 3D games.

  I don't have a solution for you (assuming that DXDIAG, in fact, reports to have DirectX 9 or higher).  You can see if you install a new driver support, but if it were me, I would be first contact Acer technical support or ask your question in another forum as one of the following conditions:

  Intel graphics Forum: http://communities.intel.com/community/tech/graphics
  Forum PowerPoint: http://answers.microsoft.com/en-us/office/forum/powerpoint (select the corresponding forum for your version of Powerpoint).  Include the results of DxDiag, including the version of DirectX.  If there is something unusual about the image that causes the crash, include this info as well.

  Normally, for notebook/laptop computer, it is better to get the drivers of the mfr of computer rather than the manufacturer of the device.

  Acer drivers for your computer are here: http://support.acer.com/us/en/product/default.aspx?tab=1&modelId=535 (you want the Intel VGA for XP driver)

  Intel has a newer driver: http://downloadcenter.intel.com/SearchResult.aspx?lang=eng&ProductFamily=Internet+Devices&ProductLine=Netbooks&ProductProduct=Mobile+Intel%C2%AE+945GM+Express+Chipset+Family
  It's the main Intel support page: http://www.intel.com/p/en_US/support/highlights/graphics/945gm

• Graphics card does not support the required version of DirectX 9.0

  Problem message: this problem occurred because your graphics card does not support the required version of DirectX. This version of Windows requires a DirectX 9.0 compatible video card or newer.  My question is what that update of video card do I download to fix this problem and where can I find.

  Problem message: this problem occurred because your graphics card does not support the required version of DirectX. This version of Windows requires a DirectX 9.0 compatible video card or newer.  My question is what that update of video card do I download to fix this problem and where can I find.

  =========================================
  It may be interesting to try to go to support
  site Web of MFG. your video card and
  search for course Windows XP Compatible
  drivers.

  (FWIW... If your computer is a laptop... check
  the manufacturer of the comput4er one
  updated video driver)

  If you do not know the make and model of
  your video card... check documentation
  supplied with the computer.

  Also, you can try the following steps...
  Reach... Start / run... type...
  Msinfo32... Press on enter.

  On screen Information System... Choose...
  Components / display...

  You should find the make and model of your
  adapter display as well as the version of the driver.

  If the driver on the Web site is no longer
  current than you run...
  Download and install it. Also, you should find
  and follow the installation instructions on the
  support site. John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• "Make window film can not start because your video card does not support the required level of hardware acceleration when you make a movie in windows vista Photo Gallery

  Original title: Hello. I have usedd to make a movie using Windows vista window photo gallery. Now, I can't. could you please help me

  Hello. I used to be able to make a movie using Windows vista window photo gallery. Now, I can't. could you please help me

  That's how I did.

  Open a pictuer using the photogallery.

  I have in the photo gsllery window, click make a movie tab.

  with this click it used to drive me to another window, but no more, instead ii have a message: make movie window cannot start because your video card does not support the required level of hardware acceleration or hardware acceleration is not available

  Hello

  
  Were there any changes (hardware or software) to the computer before the show?
  
  Method 1: Optimize the hardware acceleration and check if the problem persists.
  a: Click Start > Control Panel > display
  b: click on change display settings , and then click Advanced settings
  c: click the Troubleshooting tab, and then click on change settings of
  d: make sure that the slider hardware acceleration is set to full, and then click ok.
  
  Method 2: update the video drivers and check if the problem occurs.
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly
   
  Method 3: Perform the steps in the article mentioned below and see if the problem occurs.
  http://support.Microsoft.com/kb/923122
  
  Hope this information helps.

• Graphics card does not support the Aero themes

  I have a graphics card on CPU and its brand

  A10 - 7850K of AMD Radeon R7, 12 hearts of calculation 4 C + 8 G, 3700 Mhz, 2 Lossnay

  And this computer was built by me and I installed Windows 7 Home Premium 64 - Bit

  When I updated Windows Experience Index graphics Aero said 1.0 so I need the driver for this problem.

  It going no higher than 1.0

  Pls tell me if I can do something to solve this problem it is the old boring basic theme.

  Hi Lyle,

  Thanks for posting your query on the Microsoft Community.

  According to the description of the problem your graphics card does not support the Aero themes. If you experience a problem then you need to update the drivers.

  Drivers are updated occasionally. Windows can update automatically, or you can install the drivers updated yourself. It is important for you to have confidence in the updated drivers that you install. Windows warns you if it detects a suspicious or dangerous driver, you should not install.

  Try to update the drivers from the link provided below and see if it helps you to solve the problem.

  AMD DRIVERS

  You can also consult the article mentioned below to troubleshoot the Aero themes.

  Solve problems with Windows Aero

  Hope that the information provided is useful. Let us know if you have questions related to Windows, we will be happy to help you.

  Kind regards

• graphics card does not support the Aero effects?

  Sapphire Radeon Vapor-X HD 7770 GHZ OC 1 GB
  DDR5 DVI-I/DVI-D/HDMI/DP PCI-Express graphics card

  1 x Dual - Link DVI, 1 x DVI Single-Link
  1 x HDMI (with 3D)
  1 x Display Port
  Display Port 1.2
  1100 MHz base clock
  5200 MHz Effective
  128-bit GDDR5 memory

  the SAPPHIRE HD 7770 Vapor-X OC Edition
  has 1 GB of more recent DDR5 memory,
  and is factory overclocked with clocks of 1100 MHz core
  and memory clocks 1300 MHz (5.2 GB/s into force) to deliver excellent performance
  Work or play with multiple monitors is becoming more and more popular.

  Windows experience index note my video card with a fat score 7.6

  and NOW windows 7 64 bit is tell me
  that my epic video card does not support the Aero effects?

  You owe joke... !!!

  Hello Dan,.

  Thanks for posting your query in Microsoft Community.

  I understand that you get the message that the aero effects are not supported by your video card. I would help you with the question. However, I would be grateful if you could answer a few questions to refine the question in order to provide you with better assistance.

  1. What is the edition of Windows 7 installed on your computer (Home Premium, professional, Ultimate etc.)?
  2. What is the brand and model number. your computer?
  3. What is the exact message you get?

  The question could arise if Windows 7 is not compatible with the version of the driver or if the driver you are using, in particular, does not supports the Aero effects.

  I would suggest trying the following methods and check if the problem persists.

  Method 1:

  Run the next fixit and then re-run the assessment. Check if it is useful.

  Visual effects Aero Glass in Windows are not working or displayed

  If the problem persists, try the following method.

  Method 2:

  See the steps in the following Knowledge Base article and check if the question is reproduced.

  Guided Help: the problems of Aero in Windows 7

  In addition, I suggest you refer to the section: Aero material required in the following article and check if the problem persists.

  What is the Aero visual experience?

  Hope this information is useful. Let us know if you need more help, we will be happy to help you.

• Wireless network card does not appear in the Device Manager on Satellite L50 - B - 1 DM

  Hello!
  I bought just new Satellite L50 - B - 1 DM, model number PSKTCE and installed on Windows 7 Professional SP1 64 bit. He came without OS installed and without driver installation disk.
  Problem is that Wlan card does not appear in Device Manager.

  For my Toshiba support model are 37 drivers and programs. I have already installed: Windows 7 Professional 64-bit, all updates to Windows that appeared, SP 1, driver LAN, Toshiba Value added Package. And I tried to install all wlan drivers 4 in the list of "tool utility Intel ' also.
  Does not always display any connection without wireless WLAN card. Pressing Fn + F12 does not change. In "Network connections" is the only connection - LAN. No WLAN, no bluetooth.

  I have "Other devices" in Device Manager with yellow marks on: network controller; PCI device; PCI Simple Communication controller; SM Bus controller. USB controller; Unknown device (with Microsoft ACPI - compliant system location) and video controller.

  Any help would be welcome. Thanks in advance

  If it's not bad - just saw that my BIOS is version 1.70

• Satellite L100: Wireless network card does not recognize media

  I bought a Wifi (Gigabyte gn-wi01gs) to my L100, but this card does not work. I installed all the drivers, but it does not recognize any network. No other computer has a problem.

  This shows that, when I press Fn + F8 "wireless communication is disabled. Please activate the wireless communication switch "." What 'switch '? There is no switch!
  What should I do?

  Someone mentioned here in the forum that with the version of the BIOS under 2.10, the Wireless LAN card is unable to get a correct IP address of the connected Access Point or it is impossible to get a connection point of access to all.
  Added the new BIOS that fixed a problem with the wireless LAN switch kill, the switch did not work properly.
  WLAN should be activated by pressing FN + F8.

  So please update the BIOS to Version 2.10 or higher, but don't forget to use the good BIOS and the correct procedure of updating the BIOS!
  Incorrect BIOS may damage the motherboard.

• Satellite A300D-11v - wireless network card does not work under Win XP

  I ve problem. I'm looking everywhere and I don t know what s happened.
  I installed XP and I ve problem with WLAN. Before I've used Vista and was ok :)
  I got the driver for RTL8187b of
  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=1&PFID=1&level=6& Conn = 5 & DownTypeID = 3 & GetDown = false & downloads = true #R TL8187B
  and I tried the official website of Toshiba.

  In Device Manager, everything is ok, but I can't connect.
  This n t work:
  "The wireless network card is Atheros and not Realtek! The LAN card is Realtek but not the wireless network card!
  The Atheros driver can be found here:
  http://APS2.toshiba-tro.de/WLAN/

  Can someone write me step by step how this fix.

  Please help me and sorry for my English :)

  > Also may try to reinstall the drivers that appear in this web site, appear here the Atheros drivers your need of portable.

  Your computer laptop doesn t support card Atheros, but card Realtek WLan.

  > In Device Manager, everything is ok, but I can't connect.
  As you say the WLan card is recognized correctly, but you can't connect.
  Why?

  I m do not know why, but you should check first if your WLan router uses the same standard WLan (802.11 A, B or G) as the WLan card.
  Check the settings!

  Then check if the right WLan encryption has been selected, check if the Mac address was not enabled, check if the firewall doesn t affect the WLan connectivity.

• My wireless network card does not work! (Computer HP laptop, 2000;) Win7 Home Premium 64-bit)

  All of a sudden out of no where my wireless network card screwed! I now use a straight-through Ethernet cable. I have no idea how to solve this problem! If it's just a software thing, then whatever, but I will have to consider to Best Buy or what?

  (1) did you check that you have not turned off accidentally any possible hardware switch?

  (2) have you checked that the correct drivers are installed?

  (to benefit other readers, this is a clean install after major problems from the use of registry cleaners and bad advice)

• Wireless network card does not work

  Pavilion dv6-6c01eo (A7Q69EA)
  
  Windows 7 64 bit
  
  Network controller is missing
  
  Have formatted the computer with a disc of CD windos 7 64 bit.
  
  Drivers updated via the HP Web site, downloaded all four pilots were of a single function, and it is sp54998.exe [1/1, 5.7 M] works. 3 other updates, sp55714.exe [1/1, 279.13 M] sp55805.exe [1/1, 11.55 M] sp56036.exe [1/1, 10.77 M] does not work. I have internet via an Ethernet cable, but I don't have internet through wireless netverk, it won't work because I have no driver for network controller. I need to download these drivers, where they work.

  Hello:

  Please click on the NIC in Device Manager.

  Then click on the Details tab.

  In the property drop-down list, select the second element (Hardware ID).

  After the first string of characters you see in the window.

  Who will be the ID of the model of the network adapter, and I'll send you the link to the drivers you need.

  HP is not sometimes the drivers for the cards they put in Notepad on the support page and pilot.

  Paul

• Atheros AR9285 in CQ61-410US wireless network card does not connect to the Internet after the update of the adapter driver

  I have a Compaq Presario CQ61-410US (WA974UA) which is equipped with an Atheros AR9285 B/G/N wireless network adapter.   The laptop Internet access was fast and stable when using a Wi - Fi N.   Its pilot AR9285 was the initial version of the 8.0.0.172 factory.  But because there were so many subsequent driver updates, I've updated the display driver version from the support page 8.9.9.316 (sp48755.exe).  However, after updating the driver, I immediately lost Internet access.   The laptop is running Windows 7 Home Premium with Service Pack 1 and 64-bit.

  The driver seems to be installed OK, but it does not connect to the Internet.  Here is the status of the driver: 1) in Device Manager it appears OK and is presented as working properly.  (2) in the results of IPCONFIG/all, it there is no entry for the wireless adapter and without IP addresses are affected.  Here are the results of the IPCONFIG/all command:

  C:\Users\Karen>ipconfig/all

  Windows IP configuration

  Name of the host...: KarensLaptop
  Primary Dns suffix...:
  Node... type: hybrid
  Active... IP routing: No.
  Active... proxy WINS: No.

  Ethernet connection to the Local network card:
   
  State of the media...: Media disconnected
  Connection - a DNS suffix is specific. :
  Description...: Realtek PCIe FE Family Controller
  Physical address: 00-26 - 9th - JJ - 83 - 9 c
  DHCP active...: Yes
  Autoconfiguration enabled... Yes

  Tunnel adapter isatap. {E52D6F3E-5080 4B3B - 8BE7 - B7CFD7E137D1}:

  State of the media...: Media disconnected
  Connection - a DNS suffix is specific. :
  ... Description: Microsoft ISHTHP adapter
  Physical address: 00-00 - 00 - 00 - 00 - 00 - 00 - E0
  DHCP active...: No.
  Auto connection...: Yes

  Map of tunnel Teredo Tunneling Pseudo - Interface:

  State of the media...:...: media disconnected
  Connection - a DNS suffix is specific. :
  ... Description: Teredo Tunneling Pseudo - Interface
  Physical address.... : 00-00 - 00 - 00 - 00 - 00 - 00 - E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  C:\Users\Karen >

  (3) Trying to Connect through connections network does not a list of known available networks and instead says "not connected - no connection is available."

  I have read several messages from the HP Forum and tried a lot of things, including the installation of various updates driver later thanks to the version 10.0.0.222, but I still can't the driver to connect to the Internet.  I also changed my router "n" has only B/G as the AR9285 pilot has a history of problems with Wireless N.  Even back to the original driver version 8.0.0.172 provides an Internet connection.

  Any advice would be appreciated.

  Hello:

  I'm glad that you were able to restore your internet connection.

  I'd go with the latest driver HP vice one from another source.

  The only time wherever I go outside HP for wireless network drivers is if you have an Intel wireless card.

  My recommendation is to use the free MS Security Essentials antivirus/antispyware, which never interfere with how "things important works" on your PC, such as network connections.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=5201

  Your router with a hardware firewall and a software firewall Windows. I don't see the importance of adding other firewalls.

  Unless you have a lot of albums secret info on your PC that pirates would like to get my hands on, these fully functional security roadblocks are adequate for most of us.

• Dv6 1152tx: wireless network card does not not DV6

  I have my computer hp laptop dv6 1152tx but Wireless does not work after I updated to windows 7 since vista. I downloaded driver for win 7 driver pack sp45524 was last updated, but still it does not work. I tried to check if the wifi is disabled from bios but I can't find there too.
  checked on manage wireless network, but it is to say my wireless is not enabled.
  Red Cross on the network in the taskbar.
  No wifi in Mobility Center icon
  I can not even find my driver in Device Manager.
  I have installed broadcom sp45524 but still nothing worked.

  Hello:

  Is there a wireless key switch or the key to turn on?

  Refer to the user guide for your laptop for the location of this switch.

  Look at Chapter 2, pages 5 and 6 of the user's guide for the location of the wireless button.

  http://h10032.www1.HP.com/CTG/manual/c01658689

• Satellite P100-429 - new wireless network card does not work

  Hello

  I just upgraded my home network to the draft of the standard "n" and thought that I would upgrade my wireless card on my laptop P100-429;
  Laptop is under Vista Home Premium and has the latest version of BIOS and drivers installed.

  Laptop currently has an equipped Intel 3945ABG card that works very well. I bought an Intel 4965AGN card but when I enter it, the powers of computer to top, but wont load (lights, fan-nothing else)

  Okay - so I read on some forums, could be a bad card, so I bought a brand Toshiba 4965AGN card - P/N G86C0002P710
  Still having the same problem - the computer refuses to start. Intel technical support say the card should work?
  Obviously is a compatibility problem - what can I do about it?

  Or did someone knows what kind of card I should use?

  Thanks for your help!

  I m not a Satellite P100 owner but is your laptop equipped with 3 antennas or only 2?
  If your laptop has only 2 antennas t, you can pass it to N project because this WiFi standard needs of 3 antennas.

  I think that your laptop has only 2 antennas, so that would be the reason why the two cards are not compatible to your laptop.

  Welcome them

• Wireless network card does not work with Windows 7 myt

  Hello!

  I installed Windows 7 on an old laptop nc6120 and I can't see any of the wireless networks. With cable, everything works perfectly.

  You are the very welcome.

  Here is the link for the driver you need for the WiFi Intel Pro 2200 B/G card.

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?swItem=ob-59471-1&lang=en&cc=us&mode=3&

  That should make it work.

  Then start the windows update program and see if he can find a newer driver.

  If this isn't the case, run the utility driver Intel update and he must find a newer driver.

  http://www.Intel.com/p/en_US/support/detect

  You must have Java installed to run the Intel driver update utility.

  http://www.Java.com/en/download/ie_manual.jsp?locale=en