Aspire with Realtek

Aspire 7740 with driver Realtek R2.36 version 6.0.1.5969.

Site Web de Realtek has now available R2.71.

I can update by installing R2.71?

Hi Rockhopper!

Of course, this version should be good for your laptop.

Tags: Acer

Similar Questions

  • Satellite Pro P300 has NO stereo Mix in Vista with Realtek sound card

    Hello.

    I have a P300 with Realtek internal sound card and drivers updated.
    I NEED a stereo mixer in the recording devices, but I currently get only a MIC input, even after checking "Show offline and disabled devices."

    Yes, I updated the drivers HD Audio of this site Web and Realtek and still nothing.
    The only other thing that could affect this, but I don't see how I use ASIO4ALL drivers audio in conjunction with the Realtek drivers.

    I'm running Vista 32 bit Edition Home Premium

    your

    Hi mate

    I confused m do you know why?
    Because you talk about audio driver Realtek and sound chip and my knowledge, that the Satellite Pro P300 was equipped with the audio chip Conexant!

    It s NOT the Realtek chip! It s Conexant!

    According my Conexant audio chip experience can't stand stereo mixer in the recording devices!

    Good bye

  • Satellite T110-10R with Realtek 8187se - connection drops on battery

    Hi my friends,
    There is a big problem with my laptop.
    WLAN signal strength: very good
    other laptops have these questions in this network.
    Yes, here's my problem:
    ca mode, there is no problem with the wireless connection, but on battery mode, my wlan keeps disconnecting connection, disconnection, connection... sometimes, this occurs several times in a single minute! It is quite painful and embarrassing.
    This happens with different network wireless, tried different ones - not only my home network
    my system:
    Toshiba Satellite T110-10R with Realtek 8187se
    Windows7 64 bit.
    here a brief overview on the things I've tried
    -Update BIOS!
    -Update driver!
    -Reinstalled operating system!
    -power options: max performance
    -even in all power options, I put a maximum performance for the settings of the wireless adapter, on batteries, too
    -Properties of the wlan in Device Manager card, I disabled the option: allow the computer to turn off this device to save power
    -in the same window, advanced, active 802.11 d

    Well, despite the fact that I have this problem on my home network AND other networks, I tried following things on my router at home:
    -updated firmware update
    -reset the device
    -no automatic IP (don't know the correct English term) - that I put on my laptop, too
    -wlan changed to 802.11 b, g, b, and g, also tried wep
    WLAN - channel set to auto and not auto, try different channels
    -turned off all power saving features

    ... as you can see, I tried everything I KNOW...
    Maybe, you guys have something for me that I didn't...

    Well, hopefully, someone can help me with this problem...

    > ca mode, there is no problem with the wireless connection, but on battery mode, my wlan keeps disconnecting connection, disconnection, linking

    According to my experience, this has something to do with the old driver and power saving.
    Depending on your message, this happens only in battery mode. So in my eyes, he pilots s/issue of energy saving

    I found some interesting documents:
    + Wireless network card not working anymore after the change from AC to battery mode power +.
    http://APS2.toshiba-tro.de/KB0/TSB12033K0001R01.htm

    + Wireless network connection disconnects when the AC adapter is removed. +
    http://APS2.toshiba-tro.de/KB0/TSB12033H0001R01.htm

    The second doc recommends updating the driver Realtek WLan may be, you can also try a page from Realtek.

  • Aspire E380 Realtek HD Audio Manager continues to appear

    Hello once again it is my last unresolved problem with one of my old Aspire E380 as the title suggests the Manager Audio Realtek DD keeps popping up informing me that something has been disconnected when nothing was in fact plugged or unplugged. The situation is that he will do randomly for a while then stop completely then no reason starts again some time later. I have not kept a folder to see if the occurrences are on a time table, they seem rather random.

    I did all the usual updated installed, drivers uninstall Realtek and reinstalled but no avail.

    Any other suggestions... I am convinced that it is not associated with power.

    Hello Bodi,

    You have a lot of problems!

    1 - have cleaned out your desk with a can of air?

    2 - Check that the usb on the motherboard connectors.

    2 - Check the battery voltage in the bios utility.

    3. in the bios utility, "load default settings" or "Optimazed.

  • No sound on Vista after installing SP1/SP2 with Realtek

    Hello.

    I encountered a strange problem on the computer of my parents-in-law office. After an installation of SP1 (and later SP2) no sound stereo speakers that is connected to the computer to an outlet.

    The computer is an Acer Aspire T180 with a built-in audio device Realtek HD (5.1, but the connected speakers are two standard PC speakers), and the operating system is Vista. Before installing SP1, the sound was working properly, and absolutely no software or hardware changes have been completed.

    My troubleshooting so far include:

    -Tested with a helmet and another pair of speakers that I know works

    -I have obviously checked that nothing is cut in all available parameters, or speakers

    -Tried each input/output on the back of the computer, as well as on the front

    -Checked in "output devices" that the speakers are connected and checked by default device

    -Tried the two codecs/drivers available here: http://support.acer-euro.com/drivers/desktop/aspire_t180.html

    -Tried the drivers of avaiable supplied directly from Realtek: http://www.realtek.com.tw/downloads/

    -Uninstalled Realtek everything (both in the Device Manager and programs) and let Vista automatically install the original drivers

    -Disabled the 'digital output device (s/PDIF)"which is in the list of devices in output/game

    -Unchecked the 'detect connection on the front"in Realtek audio manager program

    -In addition, SP2 has been installed, which did not help. In addition, I tried every setting available, uninstalled/installed and so on. During music playback (or test tones Realtek or Windows sounds) all is apparently looking for OK with indicators of volume, jumping up and down, but everything is quiet.

    So I'm out of ideas and cannot understand this. I am very grateful for any help and advice. Thank you!

    Hello

    Make a Restore Point to be sure it works manually. The below indicates how to use VSSadmin to put in place
    and control if necessary.

    How to create a Vista System Restore Point
    http://www.Vistax64.com/tutorials/76332-system-restore-point-create.html

    How to make a Vista system restore
    http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
    How to turn System Restore on or off in Vista
    http://www.Vistax64.com/tutorials/66971-system-restore.html

    Adjustment of the amount of disk space, System Restore uses for restore points
    http://bertk.MVPs.org/html/diskspacev.html
    How to change how much Space System Restore can use
    http://www.Vistax64.com/tutorials/76227-system-restore-disk-space.html
    http://www.Petri.co.il/change_amount_of_disk_space_used_by_system_restore_in_vista.htm

    ShadowStorage vssadmin commands
    http://TechNet.Microsoft.com/en-us/library/cc755866 (WS.10) .aspx
    http://technet2.Microsoft.com/WindowsServer/en/library/89d2e411-6977-4808-9AD5-476c9eaecaa51033.mspx?mfr=true

    Guide to Windows Vista system restore
    http://www.bleepingcomputer.com/tutorials/tutorial143.html

    Expiration errors occur in Volume Shadow Copy service writers, and shadow copies are lost during
    backup and at the time when there are high levels of input/output
    http://support.Microsoft.com/?ID=826936

    A good utility:

    Explorer of the shadow - free
    http://www.ShadowExplorer.com/

    ================================

    After doing your restore point.

    Go to Device Manager - click anywhere in the blank area - then click on VIEW - show hidden devices

    Look around your Sound Device - If found click right on - UNINSTALL and when the box appears
    -REMOVE the pilot - REBOOT - reinstall your latest driver - do not forget to check the version of the Device Manager
    that they could rollback and you will need to install the driver - reboot - check until the correct version shows
    upward.

    Also the sound driver in previous posts.

    Hardware devices not detected or not working - A Mr Fixit
    http://support.Microsoft.com/GP/hardware_device_problems

    No sound in Windows - a Mr Fixit
    http://support.Microsoft.com/GP/NO_SOUND

    I hope this helps.

    Rob - bicycle - Mark Twain said it is good.

  • HP Pavilion x 360-P1F10UA #ABA: short Popping noise through headphones before playing them all the sounds (brand new HP 13-s128nr with Realtek)

    Hello

    I hear a sound of pop via helmet whenever I play music or even he plays Windows system sounds.

    The noise is short, it is as if once you plug in your headphones.

    I believe that it has something to do with power management, because it seems that the sound system goes offline when nothing is done and once it turns to play something it makes noise.

    I found similar questions that people have had to face, but none of the worked for me.

    For example:

    http://h30434.www3.HP.com/T5/notebook-PC-sound-and-audio/HP-Pavilion-G6-2240sq-strange-sound-speaker...

    and

    http://Rog.ASUS.com/Forum/archive/index.php/t-35046.html?s=927083fd01c9f0ec873b7e9e8da8d47e.

    I did the online conversations with HP Media, but they were not able to find a solution. What they were doing was to uninstall/reinstall the drivers who did not work for me.

    In my view, that it is a software problem.

    I didn't expect that from HP, but I feel a little disappointed in my choice. I hope I can fix and not return.

    I would be grateful any suggesion.

    Thank you

    Bijan

    Hi, I have been looking for a solution to this problem and found that not using the Realtek HD Audio Manager/B & O stop audio popping. The problem with this driver is that it makes the card its close after 10-20 seconds of no audio output in order to save battery power and to our advantage, there is no way to disable this "feature". What you mean, its break-up, is similar to the helmet being handed over to since the restart of the sound card. I see that the audio is not as great after this fix. To do a choice so audio sacraficing a little quality to not burst or better audio quality and popping. I found these steps of the forums hp here, thanks to SteveCT99.

    1. Go to the Windows Device Manager > sound, video and game controllers section.
    2. In the list of the audio device drivers, look for Realtek High Definition Audio.
    3. Right-click and select disable. Down arrow on this driver, indicating it is disabled. (NOTE: at this point, you will not be able to play music files.)
    4. Right click and select Update driver software.
    5. Select Browse my computer for driver software.
    6. Select Let me pick from a list of drivers for devices on my computer.
    7. You should see a window that says Select the driver to install for this hardware device. NOTE: If you see a window that says something like This is the best driver for this device, close the window and repeat steps 4, 5 and 6.
    8. In the scheme box, select Audio device high definition (this is the device driver audio substitute) and click Next.
    9. In the Update driver warning window, click Yes. You should see a confirmation with thehigh definition Audio Device display window. Click on Close.
    10. In the list of drivers of audio device in the section audio, video and game controllers, you will notice that the high definition Audio device now displays instead ofHigh Definition Audio Realtek.
    11. When prompted to restart, click Yes

    I hope this helps!

  • HP 655 update to windows 8.1 problem with Realtek ethernet driver

    Hello

    I do an update for Windows 8.1 and now I have a problem with the Realtek ethernet driver, which does not. If I look in Device Manager I see an error for Realtek ethernet driver:

    "Your computer's system firmware includes enough information to properly configure and use this device.  To use this device, contact the manufacturer to obtain a firmware or an update of the BIOS of your computer. (Code 35) »

    I have the latest version of the bios: F.26

    I try to install the driver from the HP site: 8.3.730.2012 HP driver

    also I try with the Microsoft driver: 8.1.510.2013

    Ethernet works fine in any other OS.

    Thank you for you time and I hope that solutions to this problem.

    @all

    Install the new Bios for HP 655 compatible sound

    http://h30434.www3.HP.com/T5/wireless-Internet-home-networking/Realtek-Ethernet-driver-error-code-35-Compaq-CQ58-Windows-8/m-p/3208099#M53864

    655 HP

    Updated HP Notebook System BIOS (AMD processors)

    Version:
  • Microphone does not work when the headset is connected (Windows 7 with Realtek HD Audio).

    I am a user in advance, but this got to be one of the funniest problems ever. First, I had 2 headphones with microphone.

    1. An old helmet specified with microphone
    2. A new headphones A4Tech HS-100 with microphone that I just bought
    Problem:
    • Using the new helmet I bought, when I plug the microphone (pink jack even) it works, but also when I plug in the headphones (same headphone jack), the microphone no longer works (cannot receive all the sounds, even if it is detected clear as already plugged) and only the work of helmet.
    The most funny thing is:
    • The old headset works fine when I plug the microphone (jack Pink) and headphones (headphones) to my ASUS N81V laptop.
    • When I plug the microphone on my laptop and plug the headphones to my iphone, the microphone and the headphones work!
    • To experiment more, my laptop has a HDMI output connected to an external HDMI monitor, when I connect the microphone on my laptop, only it works, but as soon as I connect the headphones to the headphone jack on the external HDMI monitor, the microphone works again!
    Things, I tried and does not work:
    • Maximize the microphone amp
    • Separate entry made in the audio Panel
    • Ensure the microphone is not dumb anywhere
    • Install the latest drivers from the manufacturer and realtek Web sites
    I want to get both my mic and headphones works when plugged the laptop, what exactly is the problem? Any help? Thank you very much.

    I have a similar problem with my netbook a built-in microphone running Windows Starter, that's how mine to get the fix:

    Control Panel - his - recording tab - click on Configure button - set up micro - Configuration of the Microphone Wizard.

    You'll see three choices 1. Headphones Microphone 2. Table microphone 3. Others.

    All what I have to do to fix my netbook is to select the desktop instead of headphones with Microphone Microphone (it has been revived somehow).

  • Why there is no bass boost option with realtek audio?

    OK, so I've had this issue for months, but I couldn't find an answer. On my laptop, there is a variable bass boost option when I click with the right button on my headset in sound and go options for improvements. While on my desktop, which uses integrated realtek audio of the motherboard, there is no option of bass amplification. I find it weird because my laptop has a map its worse. I'm using the latest drivers, I installed the updated driver before you ask this question to see if it would solve the problem, which he did not. I'm using Windows 7 Ultimate 64 bit.

    You can use the equalizer. In Options/improvements in WMP.

    If Realtek has not to include such a feature in their driver software, then there is not much you can do other than to use the improvements of WMP. Writers also disabled driver other useful options when the re - write for W7!
    See you soon,.
    Jerry
  • The sound is fuzzy and distorted with Realtek HD Audio in Windows 7

    Hello

    4 days ago, I bought my computer laptop asus n61ja. During music playback, looks like it's a little blurry, but when I play games, some some sounds (like clicking on sounds and sound effects in the game) gets really distorted. For example, when I played left4dead and left4dead2, the sound effects of the fire are annoyingly distorted.

    I don't think that my speakers to the laptop has the problem because the same thing happens when I plug in the headphones. I tried to upgrade and downgrade the sound driver, but it didn't work. My audio driver Realtek HD Audio 2.48 R version is

    Please someone help me with this.

    Thank you.

    Thanks for the answer but Debra advice includes my problem is the following:

    Make sure that your speakers are properly connected to your computer

    I'm sure that they are correctly connected, in which case I have no option to open the folder of my laptop because of the guarantee agreement. I tried my cd of music in other laptops, and the result was not that different, slight distortion. I think that the distortion in the music and other sound effects except those two games, occurs because the SRS Premium Sound technology. When I use Equalizer sound, sounds a bit distorted, but if I disable it, no distortion at all.

    I reinstalled the games, and there was no noise problems at all. I don't know why, but maybe the problem was welcomed after a update for my driver realtek audio hd which I couldn't recognize before.

    Thanks for your advice and help Debra and Palcouk!

  • Pavilion 15 with Realtek rtl8188ee can't see 802.11n network

    Hello

    a new Pavilion 15 with the network card wireless Realtek rtl8188ee - all drivers up to date.

    I have a Netgear router which is dual band and there is a network of 11g and 11n.

    I can connect and use the network of 11g all very well.

    But I don't even see the 11n network.

    Any thoughts?

    Hello:

    If you mean that you cannot connect to the 5.0 GHz band, it's because the wireless RTL8188EE is a unique card band (2.4 GHz) only.

  • Satellite Pro L40 with realtek card: cannot see wlan Vista networks

    Hey

    You just bought the L40 (Realtek card) and it cannot see wireless networks. The diagnosis of Vista, is that the wireless adapter must be turned on. Then, it will fail to start. Function key and F8 (wireless on/off switch) does nothing.

    The wireless router is well - connected to an XP machine. I can connect to the router without a problem by using an ethernet cable.

    Running on the latest Microsoft drivers.

    Pointers much appreciated.

    Thank you
    Frank

    Hello

    you turned on the wireless the case switch on "ON"? Maybe you forgot this one, and this is perhaps the reason why it won´t work.

    Please check and make sure that you then use the FN + F8 switch.

    Would appreciate your comments on this...

    Welcome them

  • No sound Satellite L300 - 17I - problem with Realtek High Definition Audio

    Hello
    I bought a laptop Toshiba Satellite L300-17I (PSLBCE-00R002GR).
    After installing WIN XP Prof SP2, I have current drivers downloaded from the Toshiba homepage and installs.
    It works everything perfectly except the tone!
    The driver does not work!
    Can someone help me please?

    This problem is known to me. I also had.

    The solution is simply. you need to install MS patches and fixes: * KB835221 and KB888111 *.

    It is very important that you first install these patches, then the driver Realtek HD audio!

    Best regards

  • HP655 update for windows 8.1 problem with Realtek driver

    Need help with the problem addressed in another forum HP.

    http://h30434.www3.HP.com/T5/wireless-Internet-home-networking/HP-655-update-to-Windows-8-1-problem-...

    The last message point far on this forum to get help.

    -----------,

    Install the new Bios and the network works

    655 HP

    Updated HP Notebook System BIOS (AMD processors)

    Version:
  • 4752 aspire with the noise problem.

    Hello world. I have a huge problem for my audio driver now. There is no sound driver in Windows® 64-bit 10. I went to the driver and manual on Acer site, so I chose my product model, but there is no Windows® 10 64-bit has chosen.

    So, how can I find out how long a they will modernize for my model of failure? (Sorry for my bad English )

    http://www.Realtek.com.tw/downloads/downloadsCheck.aspx?langid=1&PNid=14&PFID=24&level=4&Conn=3&down...

    Check accept, click Next

    then choose click on the 64-bit drivers, download and install it.

Maybe you are looking for

  • Issue of FF 19 and PDF Viewer

    Thus, the latest version of Firefox 19 comes with a built in PDF viewer. The problem I found is that this viewer at the moment does NOT fill the fields of ina PDF, or let the user type in these fields to fill out, or show buttons print and electronic

  • A series of satellite is not recognize USB HDD

    Laptop Toshiba with XP reinstalled; USB hard drive is recognized when plugged in and shown in the Device Manager, but not shown in 'my computer' and cannot open.Worked well before. Please help guys.

  • taskbar and icons take long to load

    When I connect my backround shows, but the taskbar and icons only. If I run the Task Manager, I see explorer.exe is running which I know is what is sopposed to show those. all I can do is wait, and when it finally shows that everything is fine

  • My computer will not open certain programs, and the system does not.

    I have really no idea what's wrong with my computer, so I'll just list the symptoms. The first and foremost problem is that my computer won't open some programs.  First thing I noticed when I tried to open iTunes and it did not open, no matter how ma

  • Failed to get printer hp psc 2410 photosmart all-in-one to print in color

    I have a hp PSC 2410 photosmart all-in-one printer. I use it on a system windows xp, 32 bit. I went to make a copy in color on the printer and it gave an error on the black cartridge by saying that she does not recognize.  Had not changed or replaced