Asset stings on the Internet will not turn on.

Similar Questions

• Unable to play the game asset stings on the Internet.

  Original title: MS needs to fix this!

  This is the obvious fact that the problem is NOT users... the provider! I am a supporter of MS and would love to see this problem fixed and allowed! I you LOVE asset stings on the Internet (with the exception of having to wait 2 minutes for some fools to play). Do also real cat through!

  Hi Bob Roberts Jr

  Thank you for the question to Microsoft Community. I'll give my best to help you.

  From your problem description, I understand that you can't play trump stings on the Internet.

  To better understand the issue, answer the following questions.

  1. you receive an error message when you play the game? Or what happens when you play the game?

  2. do you use the internet connection wired or wireless?

  You can perform the methods suggested below and check if they will help you solve the problem.

  Method 1: Perform the clean boot and play the game.

  To do this, follow the steps in this link:

  http://support.Microsoft.com/kb/929135

  NOTE: After you check the clean boot feature configure Windows to use a Normal startup using step 3A proposed in the above mentioned link.

  If the method above does not work, proceed to the next method.

  Method 2: Turn on and turn off the game asset stings on the Internet.

  Open Windows features click on games, Internet games-click and uncheck the asset stings on the Internet, click Ok.

  Yet once go to Windows features, check the box next asset stings on the Internet, click Ok.

  Now, open the game and check if it works.

  If the problem persists, or if you want more help respond us. We are happy to help you.

• asset stings on the internet Windows 7 won't launch

  other games by default working fine.go to open it and don't receive nothing? What could be the cause or the solution. The only thing that I care wanted to learn to play.

  Hello jamiers4,

  You can try to uninstall and reinstall the game.

  -Click Start > type turn on or off windows features > click Windows turn on or off features in the results

  -In Windows features, expand games > expand Internet games > uncheck asset stings on the Internet

  Click OK

  Restart and follow the same path to add asset Internet hearts return to Windows.

  Hope this helps

  Chris.H
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to install Microsoft asset stings on the Internet on Windows 8

  * - Origjnal title - Windows 8

  How to install Microsoft asset stings on the Internet on Windows 8

  Hello

  Read these articles to learn more about games on Windows 8.

  Games in point 8.1 of Windows: http://windows.microsoft.com/en-us/windows-8/games

  Games in the Windows store: http://windows.microsoft.com/en-us/windows-8/games-windows-store

  Thank you.

• asset stings on the internet Windows 7 will not exceed "looking for other players.

  When I opened Trump stings on the internet it starts with "connecting to Server" and then he's going to 'connecting to other players' where it remains.
  I've played regularly for months. This has just today when I booted the computer.
  I did not any changes recently.
  Thank you.
  Michael

  Hi, Michael,

  Try the system restore to a point in time before this problem occurs.

  What is the system restore

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

  You could also try to reset your browser

  Tools > Internet Options > Advanced tab

  Click on the Reset button

  Check delete all personal settings

  Click on Reset

  Click Ok

  Close the window

  Restart the computer so that the changes can take effect

• asset stings on the Internet

  I feel a lot of frustration in trying to play trump stings on the internet because of how players delay play or don't play do not at all.  The boost button, although very useful, takes long to get into action.  Then once it seems you have to wait another 30 seconds for it to actually expel the player.  Is there any way this time waiting for the two instances can be shortened.

  There is no way for you to change this year here.  Developers can eventually release a version update that shortens the deadline or comes up with a new method of eliminating players who are not paying attention.  However, in the current version there is no way to shorten the length of time that you will have to wait.

• Power surge and now the XBox will not turn on

  We had a power surge, we blew a fuse, everything came back but the xbox. the remote flashes just all around, and the xbox does not turn on?

  Hi Debbie

  To be honest, a power surge can vary from all electronics just stopped, or completely destroyed.

  I recommend that ask you this question on the official forums of the XBox. The experts there will be more knowledge on how to diagnose the extent of the damage.

  Here are links to these forums.

  XBox Forums Home: http://forums.xbox.com/?xr=shellnav

  Xbox.com: Solve common problems: http://support.xbox.com/en-US/xbox-360/browse?xr=shellnav

  Concerning

• Adapters to the Internet will not update. Impossible to reinstall 'old'

  Driver in title problems: original adapter

  My laptop has Windows Vista Home Premium installed, but drivers update internet adapters do not work and reinstall the 'old' has not fixed the problem. I hope run that a repair of a Windows Vista disk will help solve the problem. Is this true? What would you recommend?

  Hello

  ·         What is the brand and model of the computer?

  ·         Did you try to download the drivers from the manufacturer's Web site and check if it helps?

  ·         You get the error message?

  ·         Were there recent hardware or changes to the software on the computer before the show?

  Follow the form of measures troubleshooting article and check if that helps.

   

  Network adapter problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-adapter-problems

  See also:

  Network connection problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

• Clock of the Internet will not auto sync on my windows Tablet 7, operation of the manual synchronization. What causes this?

  My windows clock will not auto sync and I have to manually synchronize the clock. Tablets clock falls almost immediately after be synchronized and it does not automatically sync with time windows but a manual synchronization works very well.

  I even made a full recovery, thinking it was corrupt software or associated possible viruses, but the problem persists.

  Any ideas would be greatly appreciated.

  Hello

  Thank you for visiting Microsoft Community.

  That by description, you experience the problem with the internet clock won't auto sync but it will manually sync on Windows 7 tablet.

  I certainly understand your concern and appreciate very much all your efforts to try to solve this problem.

  In order to understand the issue more clearly, I would ask that kindly provide me with the following information.

  1. You did any specific changes before this problem?

  2. Do you receive an error message? If Yes, what is the exact error message and the error code?

  3. What is the make and model of the Windows 7 Tablet?

  4. Since how long you are having this problem?

  I suggest you to refer to the steps below and check if that helps.

  1. Right click on the clock in the taskbar and choose adjust date/time.
  2. The time tab-click Internet, and then press change settings.
  3. Delete what is in the server field and replace it with pool.ntp.org.
  4. Click Update now. In a few seconds, Windows clock must get synchronized.
  5. Click on OK and then OK again and you're done.

  For reference:

  You can also see the following article in Microsoft Help below and check if that helps.

  Set the clock

  http://Windows.Microsoft.com/en-us/Windows/set-clock#1TC=Windows-7

  I hope this information is useful.

  Please let us know if you need more help, we will be happy to help you.

  Thank you.

• Tracing of the AMT will not turn on

  I am getting error in the alert.log file following:

  Fatal OR connect error 12170.

  VERSION INFORMATION:

  AMT for Solaris: 11.2.0.2.0 - Production Version

  Oracle leaves NT Protocol adapter for Solaris: 11.2.0.2.0 - Production Version

  Protocol TCP/IP NT to Solaris adapter: 11.2.0.2.0 - Production Version

  Time: July 16, 2014 10:25:15

  Tracing not lit.

  AMT error struct:

  NS main err in code: 12535

  By oracle doc to activate the follow-up it is defined in sqlnet.ora:

  DIAG_ADR_ENABLED = off	# Disable ADR if the 11g version
  TRACE_LEVEL_SERVER = 16	# Activate the trace at level 16
  TRACE_TIMESTAMP_SERVER = WE	# The value timestamp in trace files

  TRACE_DIRECTORY_SERVER = / u05/oradata/PROD/trace / # control trace file location

  #TRACE_DIRECTORY_SERVER = file location/u01/app/oracle/product/11202/network/trace # control trace

  TRACE_FILELEN_SERVER = 20480 #Control size in kilobytes for example trace 20480

  TRACE_FILENO_SERVER = 1

  #Control number of trace by process files

  1. don't you turn on track if only requested by oracle support to send the trace files?

  2. Since DIAG_ADR_ENABLED is off, I will not receive db significant errors in the alert file more?  IE: blocking, ora-600, drops TNS, etc.?

  Can I activate it and continue tracking?

  I am wanting to turn on tracing for more details on what's going on when I get this error TNS.  But since I apply this change sqlnet.ora, I see no longer the TNS errors.

  Thank you.

  greddy09sc wrote:

  The tns error reported in your alert log is probably transitory, and the fact that you don't see them is not necessarily bound by your changes in sqlnet.ora. In fact, I would say that they are absolutely not related.  Sqlnet.ora reached what is written in the newspaper alert databases. These posts are written by the database.  In sqlnet.ora configurations affect only what is written by the sqlnet layer itself.

  I consider the sqlnet.ora doc you mentioned above before this post.  They say that if:

  If the DIAG_ADR_ENABLED parameter is set to OFF, and then follow-up to file non - ADR is used.

  which means that it will turn off right? :

  "infrastructure of diagnosability fault advanced to prevent, detect, diagnose and solve problems. The problems are errors critics such as those caused by bugs of database code, metadata corruption and customer data corruption. »

  This is what confused me.

  But the normal monitoring still occurs.  And the difference between "normal" and followed by "ADR" is not in what is traced, but where trace files are written and if there is no extra packaging that goes with it.  Tracing of ADR will add a file '.trm' and the file 'trc '.

  The AMT error may be transient alert.log after a change in sqlnet.ora.  You mention how they are absolutely not related. But I was getting 2-3 TNS error in the alert.log daily minimum. During the 4 days of this sqlnet.ora change I did not receive ANY TNS error.

  There are certainly times that a tns error may appear in the alerts log.  The database interacts with the network - especially when it acts as a client to a different database, via db link. If a network issue resulting occurs - as a result of the database - it will be reported back to the database, because the datbase was the process that requested services network.  But the sqlnet.ora is a configuration file for the network, not the database.

  I have since then, disable the tracing setting the file sqlnet.ora, including deleting DIAG_ADR_ENABLED = off.  I immediately TNS error in my alert log within 12 hours.

  I'll continue to monitor my TNS error now.

  Thanks for your useful suggestion and comment Ed.

  So to debug, we would need to know exactly what your database has tried to do when the error has been generated (since you say it is reported in the journal alerts) and we would need to know the exact contents and full of the sqlnet.ora in the ORACLE_HOME as well as the database reports the error When the error is thrown and when it isn't.

• The product will not turn on

  Not activate, said it is on 2 other computers already, but it is not

  KaranV wrote:

  Not activate, said it is on 2 other computers already, but it is not

  What is the version of your product?  Version 9, 10, 11, 12?

  In addition, if you reinstall the product on a new machine after the old one was abandoned, then you will get this message if you do not turn off the product.

  However, this is not the end of life for you because you can open an online chat with Adobe Customer Service and resolve this problem:

  http://helpx.Adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html>

  Click on the link above and scroll down the page and click on the button that says: "chat now".

  Good luck.

• ThrustMaster driver on the internet will not play

  driver will not play iam get blinking green light help please

  We are not in a position to help unless you help by providing us with as much information as possible.

  Suggestions for asking for help on a site.

  http://support.Microsoft.com/kb/555375

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_other-windows_update/what-information-to-post-in-the-Windows-Update/1467f44b-ee27-4F7D-98d7-f1c4b35b3395

  http://www.CatB.org/~ESR/FAQs/smart-questions.html

• Windows stops but the laptop will not turn off or to sleep.

  Hello

  I have Hp Pavilion dv6-6120us and recently I noticed that windows 7 is off but my computer stays, the hard drive fan and lighting too, if I put my computer to sleep it won't wake up I have to hold the power button / 10 seconds, and then restart the computer. I uninstalled all the programs that are not needed and also uninstalled my virus protection, I have run the disk cleaner, fix the registry and ran a virus check and malware and no problem, I also ran a check air that comes with my Hp system and found no problem. I already turned off all controllers usb, video card, sound card, network card and still no luck, also on the safe mode, the custom of the computer turns off. I also ran msconfig and disabled all the startup programs, services, and still no luck. I uninstalled all updates of windows too and still have the same problem, any help, I'll take thank you.

  Hi Yemel,

  This question could be either software or hardware partners. Start safe mode and check if you can close properly.

  Method 1:

  Step 1:

  Safe mode is an option of troubleshooting for Windows that starts your computer in a limited State. Only basic files and drivers needed to run Windows are started. Mode safe mode appears in the corners of your monitor to identify which Windows mode you are using.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Step 2:

  If the problem does not persist in Mode safe then the problem may be due to a third-party program/application. To determine which program or application is causing the problem, try to place the computer in a clean boot state, and check.

  Place the computer in a clean boot state, then check if it helps. You can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to perform a clean boot for a problem in Windows Vista, Windows 7 or Windows 8

  http://support.Microsoft.com/kb/929135

  Note: Follow the section 'More information' to reset the computer to start as usual after a clean boot troubleshooting.

  Please refer to:

  Solve problems with sleep and the night before extended Modes (Windows 7)

  The problems of wake the computer from sleep mode

  Note: changing the BIOS settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS settings can be solved. Changes to settings are at your own risk.

  Please post with the State of the question so that we can help you.

• HP G72 - computer laptop is plugged in and that the charge light appears on the side, will not turn on

  I have G - 72 laptop I've had for about a year now and just yesterday, I started having a problem where the laptop does not start? It is connected on the wall and the laptop and seeing load lights up blue and the computer does not start. I unplugged and still nothing?

  Don't know what to do?

  Hello

  Try a Hard Reset as follows.

  Shut down the laptop, unplug the AC adapter and then remove the battery.  Press and hold the power button for a minute.  Reinsert the battery, connect the AC adapter and see if the laptop boots.

  Kind regards

  DP - K

• Download files from the Internet will not end

  I have a problem downloading of the content of any Internet site.  I use IE 8 and Mozilla Firefox and downloads will start but never finished, while using a browser.  Downloads crash at different points in the download process.  The download process will fail any site I visit (some examples are McAfee, Apple, Microsoft and HP.  He did not even finish download music bought on iTunes.

  Hi ZapNap,

  1. did you of recent changes on the computer?

  2. you receive an error message when downloading?

  3. What is the type of internet connection you use?

  4 when was the last time it was working fine?

  5. do you have security software installed on the computer?

  If the problem just started I would say that you check first with the yourInternet service (ISP) provider to check if there are problems at their end, as all downloads are defective.

  If there is no problem at the end of Internet service provider, then I suggest that you check if the problem persists in mode safe mode with networking.

  Steps to start in safe mode with networking

  Note: Do not try the step below if you use wireless or internet Dialup Connection

  (a) restart your computer if it is running.

  (b) press F8 after your computer powers initially on.

  (c) once you see the menu Advanced Boot Options, you can stop tapping.

  d keys) use the up/down arrow to select your selection.

  (e) select Mode safe mode with networking and press ENTER.

  (f) you should see loading drivers and wait please.

  (g) you should then be at the Welcome screen.

  (h) logon to your computer using an account with administrator privileges.

  If the problem persists in mode safe mode with networking then I would suggest that you scan the computer using the online scanner and remove all malware infections or virus from the computer, check to see if it helps.

  The scan below only works on the 32-bit version of Windows

  http://OneCare.live.com/site/en-us/default.htm

  You can use the Microsoft security essentials to scan your computer

  http://www.Microsoft.com/security_essentials/

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.