Assistant circuit for 14.0 Multisim Base edition?
It is a very simple question, but I couldn't find the answer. I use Multisim base edition 14.0. It excludes the Circuit Assistant? I'm following the manual of NI Multisim basic exercises. Isn't normal that all covered (not optional) features in these training manuals are included in all versions of the software? I'm confused.
Hi pomirobotics
I did some research and I found some information, and it seems that the basic version of multisim doesn't have the feature of the Circuit (555 timer Assistant, Assistant of the Op-Amp, filter Assistant)
You can check the different features of each version of multisim on the following link.
http://www.NI.com/Multisim/buy/Pro/
Tags: NI Software
Similar Questions
-
Problem, reinstall the Update Rollup 2 for Windows XP Media Center Edition 2005
I have problems with MCE 2005. My hard drive crashed and the technician that restored my repressive said that he could not work in MCE 2005. It's a shame because he was working before the hard drive crashes. I work with windows XP.When I go to install the internet and begin to test the connection it gives me "Critical error of process - Code 2"When I go to the TV configuration, it tells me "Tuner not found". Even if I know it works because I also Win TV7 in Hauppauge. My TV tuner is HVR-1600.With these problems, I thought that the solution might be to reinstall rollup 2 according to the Microsoft.http://support.Microsoft.com/kb/910905However, when I go to reinstall the Update Rollup 2, it seems to be to establish a restore point and then it stops when it hits hotfix (KB891593).I took a copy of the mcelog and have attached a copy of the log below.Assistance or management, you can provide me to solve this problem would be highly appreciated.
At this point, I'm a newbie to this and I don't have a clue as to the cause of my problems and any ideas you may have for me would be much appreciated.A generic Package: 10/28/10. 21:32:48
Looking for an existing installation of the generic packageA generic Package: 10/28/10. 21:32:48
Looking for an existing installation of the generic package
Process creation: WindowsMedia10-KB895572 - x 86 .exe/quiet /norestart
Process returned 0 x 00000000Function (ExecCmdInThread) Message of Post for the Package id: 1045.
A generic Package: 10/28/10. 21:33:02
Looking for an existing installation of the generic package
Process creation: WindowsXP-KB891593 - x 86 .exe/quiet /norestart
Process returned 0 x 00000000Function (ExecCmdInThread) Message of Post for the Package id: 1046.
A generic Package: 10/28/10. 21:33:02
Looking for an existing installation of the generic packageProcess creation: WindowsXP-KB895961 - x 86 .exe/quiet /norestart
Process returned 0 x 00000000Function (ExecCmdInThread) Message of Post for the Package id: 1047.
A generic Package: 10/28/10. 21:33:02
Looking for an existing installation of the generic package
Process creation: WindowsXP-KB899337-v2 - x 86 .exe/quiet /norestart
Process returned 0 x 00000000Function (ExecCmdInThread) Message of Post for the Package id: 1043.
A generic Package: 10/28/10. 21:33:02
Looking for an existing installation of the generic package
Process creation: WindowsXP-KB899510 - x 86 .exe/quiet /norestart
Process returned 0 x 00000000Function (ExecCmdInThread) Message of Post for the Package id: 1043.
A generic Package: 10/28/10. 21:33:02
Looking for an existing installation of the generic package
Process creation: WindowsXP-KB888795 - x 86 .exe/quiet /norestart
Process returned 0 x 00000000Function (ExecCmdInThread) Message of Post for the Package id: 1043.
A generic Package: 10/28/10. 21:33:02
Looking for an existing installation of the generic package
Process creation: WindowsXP-KB902841 - x 86 .exe/quiet /norestart
Process returned 0 x 00000000Function (ExecCmdInThread) Message of Post for the Package id: 1043.
A generic Package: 10/28/10. 21:33:02
Looking for an existing installation of the generic package
Creation process: KB900325.exe/quiet /norestart
0x00000bc2 returned by processFunction (ExecCmdInThread) Message of Post for the Package id: 1048.
"Creative process: c:\0f7019deb34a2ccd3d5c2a4d9e4f3e57\bin\wmfdist95.exe/q: a/r: n /C:"wmsetsdk.exe/WMFDIST/q/r: n /DisallowSystemRestore.
Process returned 0 x 00000000Function (ExecCmdInThread) Message of Post for the Package id: 1044.
A generic Package: 05/12/11. 21:26:14
Looking for an existing installation of the generic packageA generic Package: 05/12/11. 21:26:53
Looking for an existing installation of the generic package
Process creation: WindowsMedia10-KB895572 - x 86 .exe/quiet /norestart
Process returned 0 x 00000643Function (ExecCmdInThread) Message of Post for the Package id: 1045.
A generic Package: 06/03/12. 21:27:50
Looking for an existing installation of the generic packageA generic Package: 06/03/12. 21:28:23
Looking for an existing installation of the generic package
Process creation: WindowsMedia10-KB895572 - x 86 .exe/quiet /norestart
Process returned 0 x 00000643Function (ExecCmdInThread) Message of Post for the Package id: 1045.
A generic Package: 12/02/13. 09:44:39
Looking for an existing installation of the generic packageA generic Package: 12/02/13. 09:45:16
Looking for an existing installation of the generic package
Process creation: WindowsMedia10-KB895572 - x 86 .exe/quiet /norestart
Process returned 0 x 00000643Function (ExecCmdInThread) Message of Post for the Package id: 1045.
A generic Package: 12/02/13. 10:11:58
Looking for an existing installation of the generic packageA generic Package: 12/02/13. 10:12:30
Looking for an existing installation of the generic package
Process creation: WindowsMedia10-KB895572 - x 86 .exe/quiet /norestart
Process returned 0 x 00000643Function (ExecCmdInThread) Message of Post for the Package id: 1045.
Hi kwanray,
Welcome to the Microsoft community. According to the description of the problem, you can not reinstall the Update Rollup 2 for Windows XP Media Center Edition 2005.
I'll help you with this problem. I suggest you follow the steps in the article.
Update Rollup 2 for Windows XP Media Center Edition 2005
Reference: Support for Windows XP Media Center Edition 2005
Let us know if you need help with Windows related issues. We will be happy to help you.
-
How can I change the background color for the bar 'help file edit view history bookmark tools' in Firefox 29,0
You can add a theme of solid color to change the color of the top of the browser window, which contains the Menu bar.
-
Prefs in user.js for the Mozilla rich text editing has stopped working
Prefs in user.js for the Mozilla rich text editing has stopped working. He worked, then stopped. you had to do system restore. user.js file replaced, does not work
This has happened
Don't know how many times
solved with this
-
Can I get a key of product if I downgrade my windows 2008 r2 standard sp1 for windows 2003 r2 enterprise edition sp2?
It seems that it would be possible. See this page for more details http://www.microsoft.com/windowsserver2008/en/us/downgrade-rights.aspx
-
Product key lost for Age of Empires Gold Edition
Original title: lost product key!
I lost my product key for Age of Empires Gold Edition (original game). Contact information only I can find are American. I'm in Australia. How can I get a new product key? Thank you.
Hi Joshlaila,
I suggest to read the following article and check if it helps.
How to get a new product key for Microsoft Games for Windows, Streets & Trips, or MapPoint
http://support.Microsoft.com/kb/973457
Contact Microsoft
-
Named for the installation of the driver for Windows Server 2003 standard edition for the printer model HP OfficeJet 5610 all-in-one.
Hello
The HP Officejet 5610 compatible only with client operating systems, it is incompatible with any OS Server 2003 or 2008.
You can find the printer specs below:
http://support.HP.com/us-en/document/c00420495
Shlomi
-
Service pack for windows xp 64-bit edition?
Who is the latest service pack for windows xp 64-bit edition? Is there a service pack 3 for windows xp x 64 edition?
Hello
There is no SP for Win XP 64 bit running.
Please visit the link below:
http://Windows.Microsoft.com/en-in/Windows/help/learn-how-to-install-Windows-XP-Service-Pack-3-SP3
-
tried to find this scanner for Windows Server 2003 Standard Edition software, but even now, I'm not find software scan.
Printer model: HP 3390 Laser jetI don't want the drivers. I mean the software. The drivers you get from the page server 2003 and the software from the page I referenced. Otherwise, you need to contact HP, as they provide that software, not Microsoft.
Steve
-
Update for Windows XP Media Center Edition 2005 Rollup2
Received the following error message when you try to connect to XBox Live. "There is a problem with the installation of Windows XP Media Center Edition 2005. Uninstall the update for Media Center Edition 2005, and then re - install the update from the Windows Update site. Re-run the installer to XBOX 360. »
I uninstalled the update for Windows XP Media Center Edition 2005 rolllup2, but when I go to Microsoft to reinstall, I am sent to install Windows 7. I am using Windows XP and do not want to upgrade to Windows 7. How can I get the update to Media Center Edition 2005 for Windows XP? I can't configure the XBOX 360 without it.
Hi Frustratedalso,
Follow the steps listed in the link below: error message when you try to install a program for the Xbox 360 Media Center Extender in Windows XP Media Center Edition 2005 with Service Pack 3: "There is a problem with the installation of Windows XP Media Center Edition 2005": http://support.microsoft.com/kb/954622
With regard to:
Samhrutha G S - Microsoft technical support.
-
Try to install the Update Rollup 2 for Windows XP Media Center Edition 2005 - on SP3.
Hello
All this started when my Xbox360 is dead, sent it for repair, came home another, all hung up and tried to connect to the Media Center. Of course, it did not work and the screen says to uninstall? (something), I forgot today, it has been a long road since then. BUT I uninstalled Update Rollup 2 for Windows XP Media Center Edition 2005 and updates that came after. NOW realize it was a mistake, I'm not of the Update Rollup 2 for Windows XP Media Center Edition 2005 on your computer. And I'm confused regarding why, for the first time, that I can't find a single KB article on this problem.
And even if I did not restore the system off, there is no restore point on my machine.
So I'm always searching in google and microsoft.com but a little lost right now.
Moccan,
Thanks for posting on the Microsoft answers Forum. I would like to know if you read this article for the hotfix rollup: http://support.microsoft.com/kb/900325. In particular the section more information, which has this:If the 886904 update is installed, you must uninstall the 886904 update before you install the Update Rollup 2 for Microsoft Windows XP Media Center Edition 2005. Otherwise, the installation of .NET Framework 1.1 SP1 will fail.
To determine whether the 886904 update is installed, follow these steps:
- Click Start, click run, type appwiz.cpl, and then click OK.
- Click to select the Show updates check box.
- In the currently installed programs list, look for the following element:Fix for Microsoft .NET Framework 1.1 (KB886904)
If you see this option, you must remove the hotfix. To remove the patch, click Microsoft .NET Framework 1.1 Hotfix (KB886904), and then click Remove. Then, visit the Windows Update Web sit to download and install the Update Rollup 2 for Windows XP Media Center Edition 2005.
If you haven't checked out on this yet, then follow the steps below and let us know the result. Mike - Engineer Support Microsoft Answers
Visit our Microsoft answers feedback Forum and let us know what you think. -
ACTIVATION KEY FOR WINDOWS VISTA HOME PREMIUM EDITION
I WANT THE KEY OF ACTIVATION FOR WINDOWS VISTA HOME PREMIUM EDITION
You will need to purchase a product key for Windows Vista Edition Home Premium:
http://store.Microsoft.com/Microsoft/Windows-Vista-Home-Premium-with-SP1-32-bit-full/product/28C6A36F Carey Frisch -
Cascades Cookbook will not build: no rule for target ' mk/cs - base.mk'.
I downloaded Cascades Cookbook (qml version Gold) on the web at:
http://developer.BlackBerry.com/Cascades/files/release/samples/10_0/cascadescookbookqml.zip
I imported (file; Import; Existing projects in the workspace) in my Momentics IDE & get the following error when I build:
No rule for target ' mk/cs - base.mk'.
Any ideas what is the problem?
I'm trying to figure if I could use something before 'gold' SDK but don't know how to check (Momentics says help I use 10.0.6 but this seems odd, given that the gold shows that 10.0.09...must be different but similar looking for versioning). Is there a way to check if you have the latest updates? Tried checking for updates under the Help menu, but this does not seem right. You have to download another 3/4 GB of SDK, whenever there is an update?
There is the "Update Native SDK" button on the toolbar in recent versions of Momentics but you will have to update to the latest downloadable first of all.
Watch version 10.0.9 mine in about-> help.
The latest version of samples can be downloaded on github:
https://github.com/BlackBerry/Cascades-samples/tree/master/cascadescookbookqml
-
software assistant camera for toshiba - 1.7.270.1204 L
TOSHIBA A300-27 X SYSTEM UNIT
MODEL PSAG8E NUMBERHi Tihomir,
The description of the problem is a bit unclear. I would like to ask that you provide the following information to help you best.
-What is the problem with the software assistant camera for toshiba - 1.7.270.1204 L?
I suggest you to visit the Web from Toshiba website and install the software.
Alternatively, you can contact Toshiba for additional assistance.
Your response is very important for us to ensure a proper resolution. Please get back to us with the information above to help you accordingly.
-
Why install 12.1.02. for windows, only to 'Enterprise edition '.
Hello
Why install 12.1.0.2. for windows, allows only 'Enterprise edition', the other choice, as the standard edition are grey. I had installed hundreds of times and this is the first time, happens to me any idea? I tried in both computers and get the same problem. a work around?
I downloaded yesterday from http://www.oracle.com/technetwork/database/enterprise-edition/downloads/database12c-win64-download-2297732.html.
Or should I download from oracle support for them is available.
Thank you
In Oracle l list 2014-10-01 16:54 GMT - 04:00 Hans Forbrich
«Please read the Support Note "database Oracle, 12 c Release 1 patch 1 (12.1.0.2) group is broadcast right now (Doc ID 1905806.1) only as Enterprise Edition" SE and SE1 for 12.1.0.2 * may * come out later.» But consider that the big things in 12.1.0.2 are mainly due to the Enterprise Edition (in memory DB). Power supplies will probably load all SE required patches for now. »
Maybe you are looking for
-
Remote control not working only not with the G10
Hellomy remote was working initially. now it does not work in Qosmioplayer or WinMCE mode. The red light in the receiver when you press the remote control in order to do not a dead battery! any suggestions as to what was popular up
-
Book of LabVIEW for advanced users? German or English
Hello I am looking for a book on LabVIEW (ideally 7.1 but later versions are also correct) for advanced users. All the books that I find on amazon are introductions for beginners. I made the tutorial of LabVIEW and programming for a few years, so I a
-
VS 2010 pro, I can load up on more than one pc?
I bought professional visual studio 2010 can I load it on several pc. That is the office and cell phones
-
ehmm I just installed nokia 6600 pc suite on my computer so I can access the internet on my computer through the usb cable. Installation and drivers have been installed correctly. I can access the internet on the handset but when trying to connect to
-
Cleaning the start of Windows 7 64 bit
Hey,. I am trying to speed up the startup time of my laptop and I was wondering what are these programs and services: Filter agent Audio Conexant high definition. Switch profile Dolby IAstaricon Smart touchpad SynGestureAPISampleAppApplication VM331