Asus eee pc 701sd starts display reads select boot device. Help me?

Similar Questions

• ASUS computer Unable to boot error "Reboot and select clean boot device or Insert Boot Media in selected boot device and press a key." "

  Original title: ASUS computer problem

  This morning I slammed my hard cutting computer. This afternoon, when I went to get on a black screen appears and says "Reboot and select proper boot device or Insert Boot Media in selected boot device and press a key." When I go to press the same message poping maintains and does not allow me to go anywhere else. My computer also makes a click when I try to restart. Any suggestion would be appreciated. Thank you.

  Adam

  The 'Ticking' noise is indicative of an HD program.  You can made a brick out of it.  The Message on the selection of the appropriate boot device indicates the tilt of the computer 'See' the HD.

  You see the HD in the BIOS when you start?

• Cannot start the computer, the error message "Reboot and Select proper Boot device or Insert Boot Media in selected boot device and press a key any."

  Original title: can't access my BIOS, but blocked on select boot device

  I have a laptop Toshiba Satellite Pro. I gave up some time ago and removed the HARD drive to see if has been affected by the decline, as that was my first thought. "When turned on the laptop back, the error message:" Reboot and select clean boot device or Insert Boot Media in selected boot device and press a key. My HARD drive is installed correctly, that am a qualified technician. The laptop goes directly to this error message, when turned on, so cnnot access to the BIOS. Help, please.

  Hi Ryan,

  Please contact Microsoft Community. I will surely help you this question.

  To better understand the issue, let me know if you have tried pressing the F12 key or the key that is used to start the BIOS on the computer?

  Method 1:

  You may need to press the key (which is used to start-up the BIOS) as soon as you turn on your computer before Windows starts. See the article for more information.

  http://forums.Toshiba.com/T5/Windows-7-knowledge-base/how-to-enter-the-system-BIOS-on-Windows-7-computers/Ta-p/275629

  Method 2:

  If the problem persists, I suggest you to return the item and check if it helps.

  What can I do if my laptop Windows 7 or Windows Vista does not start?
  http://forums.Toshiba.com/T5/computer-troubleshooting/what-can-I-do-if-my-Windows-7-or-Windows-Vista-laptop-won-t/Ta-p/285717

  If the problem persists, I suggest you to contact the Toshiba Support for assistance.

  http://support.Toshiba.com/support/home

  Hope this information helps. Reply to the post with an up-to-date report of the issue so that we can help you further.

• Virtual machines Windows display "reboot and select the proper boot device or insert boot media in selected boot device.

  I downloaded the VM Windows and created a machine. The machine should start with ' Microsoft Corporation PXE Boot Agent v2.00 (built-in BIOS) (C) Copyright 2008 Microsoft Corporation all rights reserved.»

  "CLIENT MAC ADDR: 00 03 FF 8 1 C 2 C GUID: 2FA ' and more digits"DHCP. "... "with a spinny beside the points thing. After awhile, the... won't have a message "no boot file received" or "any offer DHCP or proxyDHCP was received" with a "reboot and device or insert boot media select start suitable for the selected boot device". What should I do? It also appears on other virtual machines. I tried pressing tools and clicking on install the built-in components, but nothing happens!

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  http://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro

• I get an error. "reboot and select proper boot device or insert boot media in selected boot device and press a key" while using the hard drive.

  Replace drive hard hgst with seagate and when I replaced the hard drive from hgst orignial he says "reboot and select proper boot device or insert boot media in selected boot device and press a key" and when I tried to install OS it does not display the hard drives to install operating system.please help

  Hello

  Check your cable connections. If necessary check with the manufacturer of the motherboard System Support
  and Seagate Support.

  Make sure that settings/settings (BIOS/CMOS) often F2 that you start the computer is configured to start at
  on the CD/DVD first in the boot order.

  Seagate - Support
  http://www.Seagate.com/support/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Reboot and select proper boot device or insert boot media in selected boot device and press a key

  I have an Asus UX31 of Zenbook ultrabook. It is running Windows 8, I installed it via download, is not a physical disk.

  Recently, I ran Windows Update and he knew as usual, until the time of reset. It restarts, showed on the screen "install updates", but then finally started only the following error message:

  "Reboot and select proper boot device or insert boot media in selected boot device and press a key.

  As mentioned, I don't have a disc, my ultrabook is not a hard drive. Internal storage only that there is a 128 GB SSD. I went into the bios and check the boot settings and the SSD is correctly listed as the only option to start.

  I can only assume some question that's happened with the update of windows. I'm not sure of how to proceed now? ATM, I only have a weight £1000 :/

  Hello r,.

  Thanks for posting your query in Microsoft Community.

  By the description of the problem, I understand that you have problems starting from the computer to the desktop screen, it gives the above error message.

  I imagine how it could be frustrating when things do not work as expected. I appreciate your efforts to solve this problem.

  As this problem occurred after installing Windows Update, this could be the reason for the incompatible driver installed with the Windows updates.

  As you have already checked the settings for starting a disc SSD set correctly, I suggest you disconnect all the external device and restart the computer, check if are able to boot to the desktop screen.

  We will try the following methods and check if it helps.

  Method 1: I suggest you create USB recovery media as your laptop doesn't have the DVD Rom.

  If you're having problems with your PC, a recovery USB disk can help you troubleshoot and fix these problems, even if your PC does not start.

  Create an installation media for Windows 8.1
  http://Windows.Microsoft.com/en-us/Windows-8/create-reset-refresh-media

  Method 2: Once you create USB recovery media, auto repair:

  Follow the steps below to perform an automatic repair:

  1 restart the computer, wait for the logo of the manufacturer to check the option of start menu, it will usually F12.
  2. the start menu key can be different with each manufacturer. If you are unable to find the start menu button, you can consult the user manual.
  3. restart the computer, when appears the logo of the manufacturer, continue to press the Boot option menu key to enter the boot menu and change the option to boot in DVD ROM.
  4. Once you start your computer by using Windows 8 DVD or system repair disc, a black screen appears with the gray text "press any key to boot from CD or DVD". Press a button on any.
  5. Select the exact time and the type of keyboard.
  6. click on repair your computer in the lower left corner.
  7. click on troubleshooting, advanced option and then click on auto repair.

  Hope this helps, please reply with the status of the question to get help.

• HP 15-g030so: the selected boot device has failed. Press ENTER to continue

  So, I got a disc error and had to go on my hard drive. After that, I was invited by a certain recovery of hp and tool that fussed around a while and rung me that he could not repair the system and some newspapers were stored. After that I tried to install win 8.1 running from a usb storage device that was the 8.1 software the installer of windows in it. Then the screen went black and I was promtped with "selected boot device failed." Press Enter to continue. "

  Any ideas on how to solve this problem?

  Problemi1 wrote:
  And now we're back to the original problem. I have an official version of windows 8.1 downloaded and formatted to a 8 GB USB by the official program from the official websites of microsoft. And just to clarify, it works with my pc. Now, when I try to start the installation in HP computer, it promots me with "selected boot device failed." Press ENTER to continue"and im the possibility of"boot manager"," Manager "start of the EFI file', who faced the same problem when I try to manually start the device and start"(yep 2 times). "»

  Hello

  Sorry to hear that.

  If you see boot and boot to the EFI file manager but nothing else, the USB is not detected.

  Please, perform the above steps

  s ' ensure that the 8.1 Win USB is intact and working

  -Secure Boot to disable and enable the Legacy mode

  -save changes and continue with the F9 mode.

  

  If it still does not respond, please take screenshots and join them in the next post.

  I hope this helps.

• White screen then the message ' selected boot device has failed.

  After a normal shutdown last night, that my cell phone went straight to a white screen on back when I turned on.

  I tried to plug and unplug, take out the battery and connecting it to a TV with a HDMI which did not pick up anything.

  After turning off the power on and off several times, there is now a white dash in the upper left.

  I let him down for about 20 minutes before a message saying "the selected boot device is a, press ENTER to continue" that turns off the computer.

  I had the computer 4 days if shouldn't them be anything malfunction already.

  Any help would be appreciated!

  GabbyBlag

  Hello;
  
  Let me welcome you on the HP forums!
  
  I read your post on startup problems and wanted to help.

  You should not have problems with a PC this new.
  
  My suggestion is that you contact the HP customer support to see about maintenance and options at your disposal under warranty replacement.  If HP is unable to repair it, then you should be able to insist on a replacement - no charge!
  
  If you live in the United States or the Canada, details are on this page: http://www8.hp.com/us/en/contact-hp/phone-assist.html#section1
  
  If you live elsewhere, contact details are on this page: http://www8.hp.com/us/en/contact-hp/ww-contact-us.html
  
  NOTE: once you get through, stay on the line until you are finally able to talk to someone ' one - it can take a while!
  
  Good luck
  
  I'm a volunteer and I do not work for, or represent, HP.
  ========================================================================
  If you feel that my suggestions helped you, please click on the thumbs-up symbol to say thank you!
  
  If they helped to solve your problem, please click 'Accept as Solution' to help others find similar information.

• computer not boot vista windows after moving it __error message: reboot and select the right Boot device.___or Insert Boot Media in selected Boot device and pressed key__

  My computer worked fine Windows Vista Home Premium. I stop him, he moved to another room, reconected everything and now it won't start. I just got this message:

  First: Hardware Monitor with a lot of temperature and tensions etc.

  Then: Reboot and select proper boot device.

  or insert media in selected Boot device key start and pressed

  You will probably have to open the computer case and check the cable from hard drive, graphics card, RAM, etc., to make sure everything is neat and tight fitting.

  Remove cards, and then reinstall them using to ensure that they are properly installed.

  See you soon.

  Mick Murphy - Microsoft partner

• HP Pavilion A6722SC: reboot and select proper boot device or insert boot media in selected boot device and press a key

  My computer has just stopped working and when I turned it on, it says I should change my hard drive. I did, but now the message is whenever I turn on my computer: reboot and select proper boot device or insert boot media in selected boot device and press a key.

  I have Hp Pavilion A6722SC. I have my 1st drive on the driver that I bought and I have the Boot Device Priority :

  1st boot Device [hard disk group]

  2 St boot Device [CD-ROM Group]

  3rd boot device [network startup group]

  4 rd boot Device [group Floppy]

  -> Disk Boot Priority group [not installed]

  -> Group of CD-ROM boot Priority [DSK02...]

  -> Group of HDD to boot Priority [DSK00...]

  -> Group network boot priority [not installed]

  I saw that many said I should disable the floppy, or I should have hard on the boot device 1 or driver, but this doesn't work for me. Someone who have solved problems of this kind? I need help!

  Thanks in advance.

  Sorry for the bad spelling.

  I needed a new OS... I had Windows Vista and I can't install it more, so I have to buy a new OS.

• X 51 issue "reboot and select proper boot device or insert boot media in selected boot device and press a key.

  Hello, I recently put in a new video card in my x 51 one and its been causing me headaches. I finally spent 5 beep error but now when I turn on my computer, after the alienware logo appears I get this message "reboot and select proper boot device or insert boot media in selected boot device and pre a key."

  I don't know what to do from here. Ive tried to change my priority of boot on my hard drive but it does nothing. I need help!

  try swapping between legacy and UEFI in the BIOS.

• I have a hp mini 311-1037nr who recently failed to start. data error is "boot device not found.

  My hp mini 311-1037nr does not start. Its running windows 7 and no changes have been made. Error message is "boot device not found. It will not run a hard drive test, gives "the hard disk does not exist '. Tried not to reset the default settings of the BIOS also no luck. any ideas?

  Drive appears you in the BIOS? If not, and if reinstalling it does not help that I assume safely that the hard disk is dead.

  You can also try to download/creation of the various Linux Live boot floppies [Unbuntu, PartedMagic, etc.] to confirm that your other components are not at fault. If you can start and run a live linux OS then your other components of the system may very well.

  You can also remove the drive of your machine and install it as a secondary drive in another computer or a disk to see if you can access it.

  You can also run a HDD diagnosis by accessing your site of hard drive manufacturers and download/creating a diagnostic boot disk.

• "Unable to boot-'Reboot and select a startup or Insert Boot Media device, and then select boot device".

  My HP Vista Home Basic to power on, it gives the message above. Work to be done to correct the boot was're - tattoo DMI files' what this means? Thank you

  http://www.notebookforums.com/thread225018-3.html

  http://www.computing.NET/answers/Windows-XP/if-your-HP-original-HD-goes-bad/157408.html

  Read the above info and contact HP, because it seems to be to do with HP:

  http://welcome.HP.com/country/us/en/contact_us.html

  See you soon.

  Mick Murphy - Microsoft partner

• Pavilion g7 1083rn: help! Laptop will not start. Not found boot device!

  My laptop has been working well but super slow lately. Just today, I turned on and automatically noticed it was different and weird like that clicking sound I've ever heard before. When I tried to turn it on, it says device not found Boot. Then I restarted and it put on normal but then said it was a mistake and I went back to the black boot device not found screen. What can I do? I don't have a cd to fix it.

  Thank you, yes it's my hard drive :/

• Reboot and select good Boot Device problem - my PC does not start!

  Hi all

  Whenever I turn on my computer I get the message "Reboot and select proper boot device or Insert Boot Media in selected boot device and press a key.

  I checked the diagonistics material and these are the results:

  Test CPU-

  Hard drive: failure of the connection Test - Error Code: BIOHD1

  Memory - past

  I don't think that the issue is a faulty connection. My reason to believe so because I think that I had a virus on my computer (I was not able to confirm) I tried to delete the last time I was able to use the computer. Then I turned off the computer to restart, but unfortunately, that's when I got this error message.

  I had this problem once before (about 3 years ago) and I was not able to solve this problem, so I just stopped using the PC. Then one day my Dad turned on the computer (a few months later) and it worked all of a sudden.

  Anyone know what this problem is? How can I solve this problem?

  Any help is greatly appreciated! Thank you very much for your time and effort!

  Additional information:

  It was originally a windows 7 PC, but I have upgraded to windows 10, which is the current operating system.

  Product: HP p6620f

  I managed to start my PC again.

  I have unplugged all connections and left it that way for about 24 hours. Then I plugged everything back in and all of a sudden the PC worked again. I don't know if it will last, but right now it works.

  I'll write another post if something changes.