ASUS P5L - VM 1394 micro ATX - card mother i945G

Similar Questions

• HP Pavilion a6000n: no need for replacement motherboard - it's the standard micro ATX?

  I want to upgrade this computer and get a new card mother and CPU. Currently there is a M2N68-LA/NARRATED-GL8E made by Asus for HP. No matter what micro ATX motherboard will work, or that it has an odd size or placement of screw hole or else incompatible?

  Thank you!

  In case anyone is interested, I picked up an ASRock 970 M Pro3 AM3 mATX Motherboard AMD and a 8-core processor from AMD FX 8320E. The motherboard was a little shorter than the origian, then the bottom screw holes align. But it is strong enough and it works fine.

  There, however, no place to plug in the SD card reader, or the front firewire. I do not use firewire, so this isn't a problem, but I'll miss the SD card reader. It's one thing that I forgot to check when looking for motherboards.

• Card mother XPS 8300

  Hello

  I think the motherboard in my XPS 8300 is trying to die, or at least give me a lot of trouble.

  I get different blue screens lately, quite often (up to twice a day). Almost everytime, they were accompanied by sounds from my hard drive (for example, the disc to stop spinning, etc.). If naturally my first step was to get another hard drive and try to back up my data (thinking my hard drive was dying).

  I tried with various programs of cloning (AOMEI Backupper, CloneZilla and so on) and they have all failed to clone the drive (usually say they could not create the new disk partition table). I then tried to install Windows 10 fresh on the new drive (with the old drive disconnected) and who also failed with windows saying that it could not format the partition just created on the new drive.

  Because the drive is new, I thought, as a test, I will try to connect to another machine to see if it still would not work. Well, it works fine. I am currently cloning my old drive to my new as I wrte it on the other machine. So at least there is that - my data should be safe. I might have bought a hard drive for nothing, but that doesn't matter that much.

  An extra tidbit of information, it's that even starting from the cloning software CD was much faster on this machine on my XPS 8300.

  So I think at the very least, the drive on the motherboard controller gives me bad.

  Now, my question.

  I want to try buying a replacement motherboard, because the whole machine is still very fast (the CPU is one of the first core i7s, but it is always fast and I replaced the card graphics and RAM over the years). So if I was able to solve this problem, I could always get a lot of use from this computer.

  Should I try to get the same motherboard model (i.e. a replacement motherboard for Dell this type exact) Dell or that I can find on ebay for example?

  Or should I get a micro-ATX Socket 1155 motherboard to another brand of renown such as ASUS or other?

  Honestly, I'm afraid that if I get an original parts of the same exact type, it will just fail again somehow not too long from now. This motherboard is actually a replacement that Dell sent a technician to install in my machine after I bought it, because the motherboard of the computer delivered with had a defect... And now this, so I'm not exactly sure in original spare parts from Dell...

  I found information on this thread:

  Link to thread

  on this same forum explaining what are the specific connectors of the XPS 8300 motherboard, so I should be able to connect any motherboard that fits the case.

  What are your recommendations? Thanks in advance.

  Hello RoHe,

  I ran thorough tests of RAM and HDD diagnosis. It took a long time (about 12 hours), but revealed no problem.

  I was able to replace my motherboard.

  I wanted to let you know also, that Windows was able to start on the new motherboard (after a phase of 'prepare the pilots' as when you install at the start). Also, it was not enabled when I started, but I was able to use the Windows 7 Pro key that came with my Dell to activate the already installed Windows 10 Pro, it worked like a charm.

  So it was way less problems you said it would be, and now my machine is in excellent working condition.

  Thank you.

• Questions card mother ThinkStation D20

  Hi I was wondering the card mother D20 does support Geforce SLI? Ordinary GPU not of Quadros?

  Also I was wondering what is the shape of the motherboard? Is it E - ATX or ATX?

  Welcome to the forum

  SLI is only supported by Quadro in workstations. It is a limitation by NVidia, not Lenovo. Very few applications workstation (CAD/DCC/oil/gas/etc) supports either benefit from SLI anyway so diminishes the need of this.

  Map of the D20 system is a layout owner but closer to E - ATX. You need to change your D20 chassis if you are planning a Board from the aftermarket. The spacers will be the biggest obstacle with wiring being a close second.

• ASUS Tablet does not recognize SD card

  My got transform TF 101 does not recognize micro SD cards. How can I solve this problem?

  Hi, Odiec,

  You have the software express gate on the system?  Update of the software

  http://support.ASUS.com/search/KDetail.aspx?SLanguage=en&no=80E22F30-B3FF-1DFE-9DFB-5CED63C0B176&t=2

  Put the card in the slot

  Restart the computer

  Now the system does not recognize the card?

  You formatted the card?
  https://www.sdcard.org/downloads/formatter_3/

• Error 0X0000007E Stop after installing the new card mother and CPU.

  Original title: Stop error after installing the new card mother and CPU.

  After I installed a new motherboard and CPU I got a stop error 0X0000007E (0XC0000005, 0XB77EA756, 0XB84C742C, 0xB84C7128) and it restarted immediately. It always starts in safe mode, but I can't understand what is wrong. The old processor is a pentium 4 3 ghz, not sure what the motherboard was, new processor is AMD Athlon 64 X 2 Dual core 4200 + and I only know that the motherboard is an ASUS socket AM2. Device Manager does not recognize the CPU correctly, it shows just two entries called processor. As far as I can tell, it's almost certainly a driver issue, but I don't know how to diagnose or fix this. I am running windows XP home, I removed my video card, running 2 hard drives at 120 g (M) and 200 g (S), a DVD drive (M) and a reader of CD (S), and a stick of RAM to 1 GB.

  If you have made the change without having to reinstall XP, you will be taking and Pray H@ll. the best thing to do would be to reinstall XP and make sure you have the drivers available for your motherboard available so that you can update the installed chipset. In addition, be aware that if you have an OEM of Windows version, the license is dead when you changed the mother/CPU card.

  I hope this helps.

• Compatibility card mother HP/Phenom 960 t

  I have a HP P7 1054, Alvorix H-RS880-card mother Μatx, rated at 95W max (oops on the purchase of a Phenom 965BE).  The motherboard is compatible "9xx" and Phenom 4 x 3.0 ghz 960 t is assessed to 95W.  Will this motherboard support unblock this CPU to present itself as a 6-core, it is strong?  I heard some motherboards do, some don't.  Moreover, the fact that this CPU is 3.4 ghz "turbo" (T) affect compatibility it is, as it technically isn't just a 9xx, this is a 9xxT.  I am currently very literal, it should work if I buy it. Add cache L3 of the Phenom my Anthlon 3.1 stock vs ghz 4 x 645 is primary, without renouncing a clock speed.  Looks like a good 95W replacing the 965BE, also 3.4 ghz but 125W

  I decided to just give up the illegitimate child of 970T and get a Phenom X 6 1045T, I know works, 95W, has 6 hearts, of course, has the L3 I want, 50% L2 more than my 4 X and will run at 3.2 Ghz Turbo when 3 or more cores is closed. For $99 at my local Microcenter, it's worth on my Athlon X 4 645 3.1 Ghz.  Without risk, HP even built desktop computers with this CPU on my exact Board.  The computer is much faster than me in any case using Solidworks.  Now if I can just sell my 125W Phenom X 4 965BE with zero minute on it...

  Thanks for me direction away from what would have been a dead end...

• (Redirected) Replacement card mother Aurora R4

  Hello!  A few years ago, I bought the Alienware Aurora R4 desktop computer.  After about a year my motherboard breaks down after trying to solve the problem of noisy fan that they suffer a lot.  I bought a new X 79 LGA2011 Micro ATX Intel motherboard and I just installed yesterday.  When I try to start the computer, I get no beeps and no video would go to the monitors, so I can't say if it is booting properly or not.  I double checked and triple check my connections and the video card works correctly and the monitors are fine.  But my concern is that if Miss me something when I installed the new motherboard.  Any help is needed.

  nowlanjr

  Best of this post in the Alienware owners Club Forum, here:

  http://en.community.Dell.com/Owners-Club/Alienware/default.aspx

  Bev.

• Is the owner of card mother Dell 0K83V0?

  Hello, earlier in 2010, I bought a Dell Inspiron 560, which had the following characteristics:

  OS: Windows 7 Home Premium 64-Bit

  GPU: Intel integrated graphics

  Processor: Intel Pentium Dual-Core E5400 Wolfdale Dual-Core 2.7 GHz

  RAM: 4 GB DDR3

  Motherboard: card mother Dell 0K83V0

  So long story short, I'm trying to get a new box ATX motherboard and card mother ALONE. If the motherboard is owner, however, some users told me that he didn't do or work. I want to know is if this motherboard is the owner.

  Thank you bunches! :)

  fake,

  After a little work, it works beautifully.

• Card mother HPE-400f

  I can't track down the card mother HPE-400f.

  On one page it says it's the H-ALVORIX_HF-RS880-Μatx and on the upgrade page, he refers to the N-ALVORIX-RS880-Μatx.

  Anyone know if they are basically the same when it comes to possible future updates regarding the CPU cards and video?

  Also if anyone has any information on a better system in the $100 range (less than $900) which also would be appreciated, as this is my first time out of the box of Pentium and you plan to buy an AMD System.

  Thanks in advance.

  East of the motherboard for the HPE-400f.   Look above the processor upgrade.

  HPE-400f has only a 300 watt PSU, so your choice for a better graphics card would be limited to something like the EVGA NVIDIA 240 GT 1 GB DDR5.  However, if you replace the power supply with a 600 watt model so you could get a close end to the top of the video page map.

  Review the specifications of performance ATI and NVIDIA . Look at the specifications of strip memory bandwidth and level of DirectX support.

  You could try to build you own.

• micro SD card

  What is the maximum memory micro SD card that can be used

  in the Slate7?

  Hello

  Up to 32 GB, is that the search number?

  Kind regards.

• Still 2 WT-10 install or move applications on micro SD card

  I have 10 windows on my Tablet (32 GB), but I have can´t install or move applications on micro SD card (64 GB). This option in the menus looks unsustainable (gray). How can I get a viable?

  Are you able to store or move the files to the SD card as photos, music, etc...?

• Drivers Windows 7 x 64 for the card mother Memphis-M

  Hello! I bought the HP Pavilion 500-164er with Linux operating system desktop PC.

  Still, I installed Windows 7 x 64 on this unit, but I couldn't find some drivers for the card mother Memphis-M.

  I need:

  Simple communication controller PCI Chipset, USB 3.0.

  Thank you and waiting for a response.

  Hello:

  You can use the W7 x 64 drivers and software of this model that has the same motherboard as yours.

  DO NOT USE ANY BIOS OR THE FIRMWARE OF THIS MODEL FILES

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063 & LC = on & CC = US & DLC = in & sw_lang = & Product = 7049404 #N543

  Chip set:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=CP-134596-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 7049404 & sw_lang =

  Comms Simple PCI:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=CP-134614-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 7049404 & sw_lang =

  USB 3:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=CP-134611-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 7049404 & sw_lang =

• Re: map Verbatim Micro SDHC 8 GB recognized as 1 GB Micro SDHC Card

  Dear all,

  A "new" VERBATIM 8 GB Micro SDHC Card is recognized only 1 GB in my T130 / WIN 7 - pretty funny: a "new" SANDISC 8 GB SDHC card is recognized as 8 GB
  What I can do here to use the VERBATIM card?

  Any feedback is very appreciated

  Ciao, Gerhard

  Akuma is right. A few years ago, I ordered on eBay 4 GB USB stick from China. What I got was only 1 GB.
  If the card is not correctly recognized return.

• Replacement card mother Qosmio G10

  After replacing the card mother a Qosmio G10-120 original Win Xp MCE with the official update (FC43S1 A5A001749010 P000454980 jury), some problems have arisen:

  1. second HARD drive internal no more seen.
  2. all buttons stop "standby/disable rebooting the computer" do not completely take effect (office closed way unexpected but manual power button continues to show the color blue and portable remains active).
  3. always on cooling fan.

  Upgrade the motherboard consisted of:

  1. creation of new channels DMI Council (in particular "Model name" field was set to "Qosmio G10").
  2. loading the CD-ROM TCN0000006 official update tool.
  3. no recovery BIOS or EC/KBC.

  Any idea?

  I m wondering how you did update the information in the DMI?
  As far as I know that the Toshiba authorised service provider is able to update information DMI as the model name, version number, etc. using utilities and special tools.

  I googled for the motherboard part number, you have deposited in your original thread, and it seems that this motherboard has been developed the Qosmio F15 series.
  So maybe his bad card mother