ASUS PC probe II. Initially, Windows will block upward.
equipped with windows vista ultimate. last update of windows (this week) has caused this problem.
ASUS PC probe II. Initially, Windows will block upward. No information given as to how to tell vista to leave him alone, I want it to run at startup upward. I don't want to 'ok' on every reboot.
Hi mobo Asus.
Welcome to the Microsoft answers site.
Make sure that the computer is set to a Normal startup in the System Configuration utility. These specific services for the program would have been blocked in starting, you can unlock, follow these steps:
1. click on start.
2. in the general tab, click Normal startup.
3. click on the Startup tab.
4. click on the required service that needs to be unlocked.
5. click on apply.
6. click on OK.
Now, restart the computer and check.
If the steps above do not help, you can uninstall and reinstall the Asus PC probe II, Setup needs to configure the utility runs automatically at startup.
Swathi B - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
Tags: Windows
Similar Questions
-
Windows 7 blocking upwards from time to time
I beleave that there is a problem in my WINDOWS 7 (OS) from time to time the computer hangs just to the top and the only way to get it going again once is to turn it off and restart the computer. When this happens and I restart the computer need me always to the selection of window screen and I always just restart the computer and things are fine until HE is ONCE again and the one here help me. because when the OS crashes, I lose everything I was working at the time.
Hi Larrydak,
Welcome to the Microsoft Answers site!
When this happens (when the computer is idle for a period of time or that you are working on)?
This happens when you do something in particular or it occurs randomly?
You can check in the event viewer to see if an application is causing the problem.
To open Event Viewer
1. click on the Start button.
2. click on Control Panel.
3. go to the system and security.
4. Select Administrative Tools, and then double-click Event Viewer.
If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
You can also try to put the computer to boot and check if all background programs is causing this issue. To help resolve the error and other messages, you can start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
The steps to perform a clean boot are given below:
1 log on to the computer using an account with administrator rights
2. click on start, type msconfig.exe in the start search box and press ENTER to start the System Configuration utility.
If you are prompted for an administrator password or for confirmation, type your password, or click on continue
3. on the general tab, click Selective startup, and then clear the check box load startup items. (The check box use the file Boot is not available.)
4. on the Services tab, click to select the skin all the Microsoft services check box, and then click Disable all
Note: Following this step lets services Microsoft continue to run. These services include networking, Plug-and-Play, record of events, error reporting, and other services. If you disable these services, you can permanently delete all restore points. Do not do this if you want to use with existing restore points system restore utility
Once you start office check if the problem persists, follow the steps in the article and find out which program is causing the problem.
For more information about the clean boot, follow the below given link:
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
1. click on start, type msconfig.exe in the start search box and press ENTER.
If you are prompted for an administrator password or for confirmation, type your password, or click on continue.
2. on the general tab, click the Normal startup option, and then click OK.
3. When you are prompted to restart the computer, click on restart
Hope this information is useful.
Amrita M
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
Windows called a potentially dangerous file and will not be installed, it is from the canon printers, how can I install it?
Windows has blocked data access cab 1Hello
1. which version of the operating system you are using on the computer?
2. What is the accurate and complete error message that you receive?
3. have you made changes on the computer before the computer?
4. are you trying to install the printer software\downloading turn off the internet?Method 1:
You may need to download the correct driver\software from the manufacturer's website only.Method 2:
You can perform the clean boot and try to install and check:
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the Knowledge Base article.
Method 3:
You can disable the security software and check
http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-softwareNote: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.
-
Title: original problems to access TV on Windows Media Center recordings
My media center has suddenly stopped working for recorded tv. Whenever I click on recorded TV, I get this message:
"Windows Media Center has stopped working. A problem caused the blocking of the program works correctly. Windows will close the program and notify you if a solution is available. »
All other features of the media center work correctly.
Any help would be appreciated.
Hi vater19,
Remember to make changes?
Method 1: Run the installed TV tuner Troubleshooter and check if it makes the difference
Open the Setup TV tuner Troubleshooter
http://Windows.Microsoft.com/en-us/Windows7/open-the-set-up-TV-tuner-Troubleshooter
Method 2: Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:
How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
http://support.Microsoft.com/kb/929833
Method 3: You can see the steps presented by Umesh P, post dated Tuesday, September 7, 2010 16:49, in the link below that relates to a similar question
http://social.answers.Microsoft.com/forums/en-us/w7pictures/thread/7b4afa49-cb84-4BF3-A306-bc0bbb5e9f70Thanks and greetings
Ajay K
Microsoft Answers Support Engineer
***************************************************************************
Visit our Microsoft answers feedback Forum and let us know what you think. -
After I installed and opened a Silkroad Online on my Windows 7 64 bit, an error pops up: Silkroad Online Launcher has stopped working, and a close button the program. Any ideas on this subject? I tried to disable the firewall and antivirus software and restart the game, but it didn't work... I don't know what to do. The whole eror massage: Silkroad online Launcher has stopped working. A problem caused the blocking of the program works correctly. Windows will close the program and notify you if a solution is available
It is a file you need to edit in Notepad in the game directory. I would contact the manufacturer of the game as to what exact file. I have not personally done it, but I've seen this fix on other forums. MCP. MCDST. LVL 80
-
"Symantec service framework stopped working" 'a problem caused blocking the program works correctly. Windows will close the program and notify you if a solution is not available"
Favorite
E-mail address is removed from the privacy *.
http://Service1.Symantec.com/support/Norton360.nsf/0/a5ae667bcb41502b6525729f002036b2?OpenDocument
It's a Symantec/Norton problem; read the links above.
Contact Norton Support:
http://www.Symantec.com/en/AU/Norton/support/index.jsp
See you soon.
.
Mick Murphy - Microsoft partner
-
Original title: the iTunes does not work
every time I want to launch the iTunes, my computer shows "iTunes has stopped working. A problem caused the blocking of the program works correctly. Windows will close the program and notify you if a solution is available.
Hi Winston,
Were there any changes made on the computer before the show?
I suggest you refer to the article to fix the problems with iTunes:
iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits unexpectedly, freezes, or launch issues
http://support.Apple.com/kb/TS1717
I suggest also refer to the link to support Apple iTunes:
https://discussions.Apple.com/community/iTunes/itunes_for_windows
-
Computer: Vista Home Edition Premium, SP2
My media center of windows worked fine two days ago, but since yesterday, it crashes when I try and run it with the statement "Media Center has stopped working a problem caused the program blocking works correctly." Windows will close the program and notify you if a solution is available. »
I tried to go back to an older restore point, I tried to pick up the .db file, I've seen people say to delete, but I don't even have that.
This is the error in the event log
Log name: Application
Source: Microsoft-Windows-search
Date: 2011-08-09 16:49:45
Event ID: 3084
Task category: Gatherer
Level: error
Keywords: Classic
User: n/a
Computer: rb - CCP
Description:
Cannot load the Search.MediaCenterHandler.1 protocol handler. Error description: a server error has occurred. Verify that the server is available. .The event XML:
3084
0
2
3
0
0 x 80000000000000
380048
Application
RB - CCP
Search.MediaCenterHandler.1
A server error occurred. Verify that the server is available.
Hello
I suggest you follow the methods and check if it helps.
Follow the steps below and check if it helps.
(a) exit any running instance of Windows Media Center.
(b) delete the mediaCenterDataStore.db file. By default, this file is located in the following location:
%SystemDrive%\ProgramData\Microsoft\eHome\mediaCenterDataStore.DB
To remove the file, follow these steps:
i. Click Start and then click Run.
II. in the Open box, type run and then click OK
If you are prompted for an administrator password or for confirmation, type the password, or click on continue.
III. in the Open box, type % systemdrive%\programdata\microsoft\ehome, and then click OK.
IV. in the details, click pane right mediacenterdatastore.db and then click on remove.
c. click Yes to confirm that you want to move the Mediacenterdatastore.db file to the trash.
(c) start Windows Media Center.
I hope this helps.
-
Original title: Windows Live Movie Maker
Hello! I have a problem with windows live movie maker. I had been using windows live movie maker before and was able to make several projects already. But recently I could no longer open my files and the following messages keep appearing on: "Windows Live Movie Maker has stopped working. A problem caused the blocking of the program works correctly. Windows will close the program and notify you if a solution is available. I downloaded the Windows Live Movie Maker program several times, but it does not work. Does this mean I can have deleted a file/program to do work and recover all the projects I've done? I remembered that once, I was removing a "Windows Live" in the program folder files because I wasn't happy with the Windows Live Messenger, kept popping up, which was not able to use, so I removed it from the list. Help, please!
Hello
The question you have posted is related to windows live movie maker and would be better suited to the community of windows live. Please visit the link below to find a community that will provide the support you want.
-
I tried to download a program: System Mechanic Professional 9.0 www.Iola.com
I recorded it on the desktop, right-click to run as administrator, at this stage, it starts to download but the following message comes to the screen: install/uninstall program has stopped working.
A problem caused the blocking of the program works correctly. Windows will close the program and notify you if a solution is available.
Of course, nothing happens after that and I close the message. I bought this on the internet and I have the activation code. It's good for 3 pc. I put it on my desktop and it works very well. My laptop is Vista Home Premium with 64-bit operating system. Everything else seems to work fine on my laptop but I desperately need this program. Laptop is so slow and Firefox takes forever to open the pages. I get a lot of messages it does not!
So I appreciate any help you can offer.
Hi luv2shop,.
This problem may occur because of the conflict by the present security software on the computer.
I suggest you try the following steps:
Step 1: Disable security software, follow the steps mentioned below
http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
Important: Activate security software once everything is done.
Step 2: use the Windows Installer Cleanup utility for delete all entries that are related to the product you have installed wrong:
Download and then install the Microsoft Windows Cleanup utility. To do this, see the Microsoft Web site:
http://download.Microsoft.com/download/e/9/d/e9d80355-7ab4-45b8-80e8-983a48d5e1bd/msicuu2.exe
Save the file to the desktop. When the download is complete, double-click the file and then follow the directions. When the installation is complete, click Start, point to all programsand then click Windows Installer Cleanup.
In the list of the products installed , delete all entries that are related to the product you have installed wrong. If there are too many entries, click select all, and then click Remove. When you have deleted all entries, click exit, and then start the installation of the product
Description of the Windows Installer Cleanup utility
http://support.Microsoft.com/default.aspx/kb/290301
Step 3: Set the clean boot computer and try to install the program
Follow step 1 in the link below,
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135Important: n ' forget not the computer to start normal follow step 7 in the link.
If the problem persists, you can check with iolo for known problems
http://www.iolo.com/customercare/
Note: Make sure that (double check), you install the right version (32bit\64bit) for your computer.
Thank you, and in what concerns:
Ajay K
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.
-
Try to install a CD "the Start-Stop software installation", but whenever I try, I get the following. Implement the application has stopped working. A problem caused the blocking of the program works correctly. Windows will close t he program and notify you if a solution is available. I sent the company and the school several times and have not yet received a response, maybe someone out there could help. Thank you!
Ok.
See if they have a patch for it.
If this isn't the case, you may need to shopping for a similar program.
Or repost in the Forum of programs on the link I gave you; they can learn more on this subject here.
See you soon. Mick Murphy - Microsoft partner
-
a window keeps popping up that says: Windows host process (Rundll32) has stopped working - a problem caused blocking the program works correctly. Windows will close the program and notify you if a solution is available
Check if you have picked up malware in your travels.
I see a lot of recommendations here for programs such as -
Malwarebytes' Anti-Malware
http://www.Malwarebytes.org/MBAM.phpSuperAntispyware
http://SUPERAntiSpyware.com/Check in safe mode.
Vista advanced boot options
http://Techblissonline.com/Vista-advanced-boot-options/See if you can isolate a possible cause.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/default.aspx/KB/929135 -
Mathematica, matlab and Powersim all receive the error at startup «empty program stopped working. » A problem caused the blocking of the program works correctly. Windows will close the program and notify you if a solution is available. " The programs worked in May when I left for vacation and now they do not work. I tried to uninstall/re-installing all programs - it did not work. Programs opened by operating in safe mode with network. I can't find out whether the problem is caused by a windows update. I can't do a restore of the system to an earlier period of time because the only active restorations are after programs stopped working. Any advice is greatly appreciated!
Hello
It seems that the module defective sdb4mdu.dll is the cause of the crash. According to my research, sdb4mdu.dll is a driver printer interface module - which means that it is related to your printer drivers. Assuming that this module belongs to your default printer (which it might not, it is hard to say), disable it would risk instability. I recommend you to run the System File Checker. See this article: http://support.microsoft.com/kb/929833/en-us
Don't forget to restart your computer after you run it.
If this does not work, try to uninstall and reinstall the drivers for your printer.
If it does not either, we can try to turn off the TPM. (first of all, creating a restore point in case something goes wrong)
I hope this helps!
Mithrandir
-
Skype has stopped working. a problem caused the blocking of the program works correctly. Windows will close the program and notify you if a solution is available.
We have Windows 7 and automatic updates.
I worked until the afternoon with Skype and after an hour when I arrived on the Office to continue to work the Skype has stopped working.
Please help me urgently!
We did all the things written on goole /Microsoft Skype support.
Does not Skype is the only program ot getting intalledIt worked! I had tried everything, but it worked for me, thank God, we communicate through Skype of Nevada USA, Ireland and cannot lose touch. It's an absolute answer to our prayers. Thank you for posting! Skype heartbeat is a very informative page that I had not discovered before now, either. Excellent!
-
Medal of honor allied assault has stopped working?
This message seems to me when I start the Medal of honor Allied:
(a problem caused blocking the program works correctly windows will close the program and notify you if a solution is available)
Hello
· How long have you been experiencing this problem?
You can reduce hardware acceleration and check if the problem persists:
1. right click on the desktop and choose personalize.
2. click on display settings.
3. in the display settings window, click on advanced settings.
4. display the Troubleshooting tab.
5. click on change settings.
6 reduce hardware acceleration.
Also try the procedure from the following link: http://windows.microsoft.com/en-US/windows7/Fixing-game-performance-problems
Also try to check if the game works the clean boot: http://support.microsoft.com/kb/929135
NOTE: make sure that you start the computer in normal mode after troubleshooting is done
You can also post your questions on: http://support.ea.com/
Maybe you are looking for
-
Why Mozilla Firefox have lots of cool themes (full), while only some work on my version of Firefox?
Want just the other themes, the cool ones, please. Is this possible?
-
Compaq mini 110: fatal error CNU9383FPY comps mini 110
Fatal error message. Allows me 3 entries in password - suggested on this forum. I've tried at least 6 passwords - no work and then fatal error message and can't do anything other then go and turn it on again
-
Satellite Pro L300D-11O - freezes in second life
Second life, I play on my lappie. http://SecondLife.com/support/system-requirements/He is lagging, I crash, a general cannot go to all occupied the SIM or it freezes. One got suggestions on I can change the settings to improve this? Thank you to adv
-
Problems of brightness with the Z500. I ran all Lenovo system checks, updated Intel drivers and Gforce, seems to be ok. But the screen of the laptop has dim. Isouspect this might be a problem, any ideas of economy energy please?
-
Replacing the fan for w/15.4 "screen and GPU integrated T60
Greetings, The combo fan/heater several months ago, I bought for my T60 was apparently the 41W6409 for a T60 with discreet gpu and cpu, but mine is an integrated model that uses the 41W6408. As I can't return it, I was just thinking to replace the ol