ASUS touch EP - 121 does not work after Windows 8 Pro 64-bit install

At ran Windows 8 Developer Preview and Preview of Windows 8 consumers on this ASUS Ep 121, Touch worked with pen and fingers, after that Windows 8 Pro 64 Bit OEM installation on 10/27 tap does not work.

Reinstalled Windows 8 Pro 64 Bit OEM and touch works during the installation process, but not after initial start-up. Don't see the unknown devices in Device Manager.

Update to the latest version of the ASUS BIOS dated 23/10/2012. Must be the driver problem or work around.

At ran Windows 8 Developer Preview and Preview of Windows 8 consumers on this ASUS Ep 121, Touch worked with pen and fingers, after that Windows 8 Pro 64 Bit OEM installation on 10/27 tap does not work.

Reinstalled Windows 8 Pro 64 Bit OEM and touch works during the installation process, but not after initial start-up. Don't see the unknown devices in Device Manager.

Update to the latest version of the ASUS BIOS dated 23/10/2012. Must be the driver problem or work around.

Hello

Read the following article.

Touchscreen does not work after the quick start on a computer that is running Windows 8 or Windows RT: http://support.microsoft.com/kb/2769287

Read the article and then click on the button download software patch is available at the top of the article.

Accept the license agreement.

Follow the instructions to receive the fix.

Concerning

Tags: Windows

Similar Questions

  • USB Flash drive does not work with Windows 7 Pro 64-bit

    I have several USB thumb drives, some of them do not work when I plug them in while others work very well. By experimenting, I reduced the problem with the 64-bit Version Windows. All of these USB keys works well in my other computers that have 32-bit installed and also even computer with the 32-bit version installed on different hard drive. All of these thumdrives are detected immediately and works without a problem. The 64-bit version, I have uninstalles and reinstalled readers, drivers updated for readers and controllers USB chipset, reasigning letter drive without a resolution of the problem.

    It is interesting to know that this problem only occurs with some discs that I (like Ativa 4 GB, 4 GB generic and Verbatim 4 GB). While I discovered that you can do all the nonworking day thumdrives work once if you shutdown computer and plug the thumdrive into the USB port and the computer to boot, boot time is longer than usual and when it is operational in 30 to 45 seconds drive appears in the list of devices and you can read, write and format normally without any problem to experiment. When you pull chase him and reconnect to USB port after 10 seconds same problem appears aggai. First of all, you get the message that the disk must be formatted and if you try to format you will get a message that windows cannot format the drive. If you try to access the drive, you get message that Drive is not accessible. If I take this player and plug it from 32-bit without problem, you see all the files in the drive and are able to read the writing and the format is normally.

    I'd appreciate if I am able to get an answer as a way to solve the problem.

    Pavan

    When you disconnected the battery of the laptop, you did, be sure to press and hold the power button for about 10 seconds?  This causes the rest of completely discharge power.

    This tip came in practice more than once in my experience.   ^_^

  • Outlook 2007 hyperlinks does not work after Windows 7 Pro upgrade Vista Business

    I have just upgaded my laptop Sony Vaio VGN-Z750D of Vista Buiness Wdows 7 Professional. As pa of the upgrade process, I uninstalled Google Chrome as directed by the instructions to upgrade.  IE has been and still is my default browser.  Immediately after completing the upgrade process to Windows 7, all hyperlinks email from Outlook 2007 stopped working, and I get an error message: "this operation has been cancelled due to restrictions in effect on this computer.  Contact your system administrator. »

    I am the administrator.  IE is the default browser.  I spent the value by default, Safari and back to IE, but no change.  I looked at several forums, but none address this issue more specifically to the Windows 7 upgrade.

    Please notify.  Thank you.

    Perfect.  Worked immediately.  I downloaded the files added to my registry, and the problem was fixed immediately on reboot.  Thank you.

  • Satellite C50D-A-12 x - touchpad does not work after Windows Update

    the touchpad does not work after the windows updare

    I always recommend you read other threads / messages and spikes before considering opening new thread in the forum
    https://Forum.Toshiba.EU/showthread.php?82878

  • HP deskjet 3510 does not work after windows 8.1

    My printer HP Deskjet 3510 cannot be detected after windows 8.1.  My computer is a HP Pavilion g6. Now, I would never, I clicked to install, I wish they would send me just windows 7. Laughing out loud

    @klb75,.

    Thanks for posting.

    The cardinal rule of when something does not work after update to 8.1 is put it back in place. This applies to the printing software and all other software. Uninstall from the control panel configuration, programs and features. Then, restart the computer.

    After that, download and install this software: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=al-108718-3&cc=ca&dlc=en&lc=en&os=4158&product=5157483&sw_lang=

    * Thus, before installing the software, disable all Firewall/antivirus software. This software can create conflicts with the printer software.

    If reinstalling it does not help, run print and scan doctor. He could fix it... http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?CC=CA&LC=en&JumpID=ex_r4155/HHO/IPG/ccdoc/printer_diag/&softwareitem=MP-135113-1

  • Installation of Windows service does not work after Windows Explorer 9 uninstalling and reinstall Explorer 8

    Installation of Windows service does not work after Explorer 9 uninstallation and reinstallation of 8.  I followed several suggestions on this forum, but still no luck.  I ran the SFC system twice, who told me he had corrupted files.  "Some have been repaired and some might not be."  I then went in the event viewer after a start to the top and he stated that the 'Adobe APM service' is not found.  Also the "hpqddsvc' and the 'gupdate' is not found.  He tries to install something every time I start, but he abandoned.  I checked whether the system is on and disabled.  It's on.  There are a lot of small problems, but my main concern is the Adobe program.  I tried uninstalling and reinstalling Adobe, but still get an error message that the Windows Installer Service could not be accessed. Other suggestions?

    Hello

    I suggest you follow the link and check.

    How to troubleshoot issues that may occur when you install, uninstall, or upgrade one program on a Windows computer

    http://support.Microsoft.com/kb/2438651

  • Wireless does not work after Windows Update

    Original title: Wi - Fi internet connection is DISABLED since yesterdays upgrade, how can I get that back on?

    Since a windows update yesterday, before closing my laptop... I am not able to access the Internet.

    My without wire is off and I can't turn it back on.  Toshiba wants $99 for technical support.

    Hi Sheryl,

    Please join Microsoft Community where you can find the necessary information on Microsoft products!

    Wireless does not work after a windows update.

    1. what day that was installed?

    You can check the update in the update history:

    See the Windows updates are installed

    http://Windows.Microsoft.com/is-is/Windows7/see-which-Windows-updates-are-installed

    2. do you receive any error messages?

    3. What is the model of the computer?

    The problem may be with the drivers or with the device.

    I suggest that you refer to the procedure described in the site:

    Wireless and wired network problems

    http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

    I hope this helps. If the problem persists, let know us and we would be happy to help you.

  • X 220 microphone does not work after Windows 10

    Firstly, as far as I know, my upgrade to Windows 10 has worked very well and I love the new OS. The only problem I have is that my microphone does not work. It shows it as being installed and working properly, but I can't use it anywhere in the system. The driver is the Contexant 20672 SmartAudio HD.

    When I go to "Set up a microphone" is said "the wizard could not start. Make sure that your hardware is working properly and check your audio configuration in the control panel to control Audio devices and sound themes. »

    My microphone is turned on and the volume is growing.

    Any ideas?

    The same problem. I deleted the folder drivers\win\audio and loaded the drivers of Windows 7 instead of Windows 10 drivers from Lenovo site. Solved.

  • Switchable redeon HD 6470 M does not work in windows 8 Pro, my graphics card? Why?

    I use a HP Pavilion g series

    In my edition of Pro windows 8, my graphics card ATI redeon switchable HD 6470 M does not work? Why?

    I ve installed driver but its says not at all.  No driver problem?
    Do you have windows do not develop this series graphics card driver software?
    Hello!
    I had the same problem with ATI HD 6470 M graphics card on my HP Pavilion G7 1223sm and I found the solution here.
    Drivers for my model of laptop from official page has not worked for me either. After install drivers, Windows 8 was always detect my graphics card such as ATI HD 7400 M with error code 43.
    I downloaded SP58660 and installed, when the catalyst Logo appeared that I canceled the installation (this retrieves the SP58660 on my HDD only).
    I went directly to the control panel-> device-> graphics card Manager. Right-click on 7400 HD and update the driver. I mentioned it in the location 'C:\swsetup\SP58660\Packages' and automatically installed Windows driver.
    Now everything works fine, in the device manager is ATI HD 6470 M without any error code.
  • Touch screen does not work after Windows 8.1 upgading

    I upgraded my HP TouchSmart tm2 notebook Windows 8 tot Windows 8.1. Now my touch screen does not work, when I touch an app. Also my touchpad do not work. There is no problem when I we an external monitor (without touch screen). I received a message that Assistant HP app is not compatible with Windows 8.1. How to solve this problem?

    Unfortunately, there is no support for the applications of the touchscreen or devices to your laptop under Windows 8 or 8.1

    operating systems.

    This is the touchpad for Windows 7 software

    You can try to install mode of compatibility in this solution provided by Member AttackofZaq

  • Qosmio F50 - FN keys does not work after Windows 7 upgrade

    Hello

    After installing Windows 7 my 'FN' key doesn't work anymore. The big problem is the upgrade to Windows 7, I turned off my touchpad using "FN + F9". Now that my FN key work and I cannot turn my touchpad.

    Is there a way to reverse without using the "fn"? And is there a way I can fix my FN key? Accessible from start > all programs > Toshiba > utilities > accessibility does not work. Is somehow connected? What can I do?

    Feedback and assistance is greatly appreciated.

    Hello

    Here's a similar thread on the Qosmio F50 with Windows 7 issue where the don t FN keys work:
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=184578𭄂

    If you must install the package of added value and utility to Support Flash Cards, but you must choose a version that is available for Windows 7.

  • Re: Satellite L500 - Wifi does not work after Windows Update

    The wireless on my Satellite L500 worked perfectly before you update windows. However, after the updat when you try to connect to a wireless connection, it says that "no connection is available.

    I then clicked on fix to try to find a solution. Then the message "the diagnostic policy service does not work. Using Ctrl + Alt + Delete I went on services and attempted to start the DPS manually, but the message "Diagnstic political service on Local computer started and stopped. Some services stop automatically if they are not in use by other services or programs. »

    This message puzzled me enough as it is said that the Wifi is infact on however in a attempt to FN + F8 F8 option does not appear. Any help would be greatly appreciated.

    Hello

    For Satellite L500, there are already some threads here in the forum:
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=186764
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=178629
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=188577

    Additionally, make sure that the DHCP and DNS services are running. Type of startup is set on "Automatic" and try to restart both services.

  • Help, INternet explorer does not work after windows update

    One day, the computer automatically downloads and installs the programs that are recommended by microsoft windows.
     
    After installation, my INternet explorer does not work.

    It reads:

    Windows could not access 'ie.redirect.hp.com '.
    Windows received an HTTP error message: 403 (refused).
    -> If this problem is consistenly prevent windows to connect to several sites on the Internet, contact your network administrator or your ISP.

    Then I click ok, and then try to go on 'www.google.com '.
    It still does not work, so I click on diagnose connection problems
    This time, it reads:

    Windows not found no problem with the network connection on this computer.

    You want to report the problem to Microsoft? Additional details about what went wrong can help create a solution. The report will be sent the next time you go online.
    Send information

    But when I send, I can not because I have Canon go online on my Internet Explore.
    When he first stopped working, I could use the system restore, but after a few months I dropped and now I can't restore the system to a place that it worked fine.

    I also know that this problem is not the administrator of network or something like that because I downloaded Firefox when IE stopped working, and Firefox works fine.

    I tried everything, but I can not do it by myself, so help please!

    @ceda only: See...

    Help: I got hacked. Now what should I do?
         http://TechNet.Microsoft.com/en-us/library/cc700813.aspx

    Backup of personal data (which none should be considered 100% reliable at this point) then do a format and clean install of Windows.  Please note that a repair installation (upgrade AKA on-site) will NOT fix it!

    HOW to do a clean install of Windows XP: see method 1 and http://michaelstevenstech.com/cleanxpinstall.html#steps in http://support.microsoft.com/kb/978307

    Once installed the clean, you will have the equivalent of a "new computer" in order to take care of everything on the next page before connecting the machine to the internet or a network otherwise and before using a USB key that is not brand new, or has not been freshly formatted:

    4 steps to help protect your new computer before going online
         http://www.Microsoft.com/security/pypc.aspx

    Other useful references include:

    HOW to get a computer that is running Windows XP Gold (no Service Pack) fully patched (after a clean install)
    http://groups.Google.com/group/Microsoft.public.windowsupdate/MSG/3f5afa8ed33e121c

    HOW TO get a computer that is running Windows XP SP1 (a) or SP2 fully patched (after a clean install)
    http://groups.Google.com/group/Microsoft.public.WindowsXP.General/MSG/a066ae41add7dd2b

    Tip: After getting the computer fully patched, download/install KB971029 manually: http://support.microsoft.com/kb/971029

    NB: No matter what Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free and download/run the removal tool before installing updates, Windows Service Packs, or updates IE and before installing your new anti-virus application (which will require WinXP SP3 must be installed).

    Norton Removal Tool
         FTP://ftp.Symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

    McAfee Consumer product removal tool
         http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe

    See also:

    Measures to help prevent spyware
    http://www.Microsoft.com/security/spyware/prevent.aspx

    Measures to help prevent computer worms
    http://www.Microsoft.com/security/worms/prevent.aspx

    Avoid fake security software!
    http://www.Microsoft.com/security/antivirus/rogue.aspx

    ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • Keyboard does not work after windows update

    The keyboard of my laptop S series suddenly stopped working after that she completed an update of windows. Another strange thing is that the wireless only turns off even when the laptop is turned off. Everything else seems to work fine except for two things.

    First thing I did was to restore the system back to before the update of windows, but nothing has changed. Then I tried to uninstall the keyboard driver then by restarting the computer, after which it automatically reinstalled the driver but the keyboard still did not work.

    Then I "refreshed" system, but nothing has changed then either. And finally, I reset the factory settings and for a little while, the wireless light turns off, but then he came back even if I had not turned on the laptop. (Update: I just changed the laptop and the wireless light disappeared so... If all goes well he will not return as a sign of improvement.) There was no change to the keyboard.

    Additional details on my laptop that may or may not have something to do with the problem:

    It is currently running Windows Pro 8 on a 64 bit system and is less than a year.

    I accidentally spilled tea really diluted on the laptop a month ago, but the laptop was working again fine until windows update a few days ago. There is no significant problem caused by the spill other than a few sticky keys who take off on their overtime and that the sensors of the keyboard backlight no longer works correctly.

    Any advice on what else I might be able to try to try to again take the keyboard in a usable state would be great.

    Hi rhel!

    If the keyboard still does not work while in the BIOS, then it means that you have here a hardware failure, and the only way to solve that is to have the repaired computer. You can visit this page to start the repair process.

    -Tim

  • HP Photosmart C7280 solutions Center does not work after Windows 7 32 bit upgrade

    I recently updated my operating system from Windows Vista to Windows 7 (32 bit).  Before the upgrade, my C7280 worked fine using the center of Solution and in my home wireless network.  After the upgrade to Windows 7 and download and install PS_AIO_02_Net_Full_Win_WW_130_140.exe, version 13.1.0, Solution Center does not work.

    At the opening of the solution Center, it displays disconnected printer.  Using the Wireless Setup Wizard, the printer connects to the network.  I can open the Solution Center and it works very well for about 3 seconds and then goes to the printer disconnected mode.

    I uninstalled and reinstalled the software update for Windows 7 package C7280 repeatedly and with the same results.  I downloaded and installed the patches and still no change.

    I finally had to restore my computer to original operating system.  After the computer back to its original configuration, I used the original to HP Photosmart printer disk to reinstall the driver for Windows Vista.  Everything worked as before.  Then I ran the Windows 7 Upgrade Advisor.  Yet once, he told me that the HP Photosmart C7280 printer was not compatible with Windows 7.  I uninstalled the printer driver and run Windows 7 upgrade advisor.  This time, I have not received any message about the C7280 printer.

    I installed upgrading to Windows 7 (32-bit), and then upgrade the HP Photosmart C7280 for Windows 7 32-bit driver.  Everything works fine now.

Maybe you are looking for

  • HP Officejet Pro 6835: The computer won't send jobs to the printer

    My HP OfficeJet Pro 6835 is on and it says it is connected to my wireless network, but nothing will be printed on it.  I ran the HP Print doctor and he says that he has no problem.  I rebooted the computer and the printer and also deleted and redownl

  • XPS 1710 & Windows 10

    Aloha, I decided to give it a try because I always have my spare in excellent condition XPS1710 gaming laptop and update Windows 10. Installation went smoothly in Windows 7 with without a hitch. Everything seems to be in order to market and also brou

  • My computer won't recongize bluetooth devices

    I have a n HP Pavilion dv7-428us laptop with built in Bluetooth adapter.  It does not recognize the Bluetooth compatible devices.  Adapters are installed and the Device Manager indicates that they are working, but it will not recognize the blue tooth

  • BlackBerry Smartphones Vodafone has the OS 4.5 for Blackberry updates

    Remember to update the desktop computer to the latest version: https://www.BlackBerry.com/downloads/entry.do?code=A8BAA56554F96369AB93E4F3BB068C22 Here is the link to Vodafone (Germany) software upgrades (don't worry... There are English installers):

  • Computer starts and restarts in an infinite loop at startup.

    Received this e-mail from Comcast around 2 April 2013 stating my computer may have a 'bot '. This function constant guard of Comcast. On 5 April, my computer started this start and restart * in an infinite loop. I took the computer manufacturer and a